Tetraphenylene-based semiconductive metal-organic framework crystals for direct X-ray detection and imaging.

MOFs have good potential for X-ray detection, but direct X-ray detection in single crystal form is rarely reported. In this work, we successfully synthesized Pb-TCPE, and the single crystal achieves a low detection limit and high detection sensitivity of 4812.6 µC Gyair-1 cm-2, which exhibits great potential for X-ray detection and imaging.

1D Pb halide perovskite-like materials for high performance X-ray detection.

The strategy of bandgap regulation is important for X-ray detection, but has not been reported for 1D Pb halide perovskite materials. In this work, three such materials, 1, 2 and 3, with a tunable bandgap, were fabricated for application in X-ray detection. 3 shows high sensitivity, far superior to commercial X-ray detectors.

Layered Chalcogenide Scintillators Enabled by Reversible Hydrous-Induced Phase Transformation for High-Resolution X-ray Imaging.

Scintillation materials have been widely used in various fields, such as medical diagnosis and industrial detection. Chalcogenides have the potential to become a new generation of high-performance scintillation materials due to their high effective atomic number and good resistance to radiation damage. However, research on their application in radiation detection is currently very scarce. Herein, single crystals of rare earth ion-doped ternary chalcogenides NaGaS2/Eu were grown by a high-temperature solid-phase method. It exhibits unique characteristics of structure transformation by absorbing water molecules from the air. To maintain the anhydrous phase of the material, we have used a strategy of organic-inorganic composites of epoxy resin and NaGaS2/Eu to prepare devices for radiation detection and discuss the irradiation luminescence properties of the two phases. The anhydrous phase of NaGaS2/Eu demonstrates excellent sensitivity to X-rays, with a low detection limit of 250 nGy s-1, which is approximately 1/22 of the medical imaging dose. Additionally, composite flexible films were prepared, which exhibited excellent performance in X-ray imaging. These films enable clear observation of a wide range of objects with a high spatial resolution of up to 13.2 line pairs per millimeter (lp mm-1), indicating that chalcogenide holds promising prospects in the realm of X-ray imaging applications.

Efficient Direct X-ray Detection and Imaging Based on a Lead-Free Electron Donor-Acceptor MOF.

Metal-organic frameworks (MOFs) have recently gained extensive attention as potential materials for direct radiation detection due to their strong radiation absorption, long-range order, and chemical tunability. However, it remains challenging to develop a practical MOF-based X-ray direct detector that possesses high X-ray detection efficiency, radiation stability, and environmental friendliness. The integration of donor-acceptor (D-A) pairs into crystalline MOFs is a powerful strategy for the precise fabrication of multifunctional materials with unique optoelectronic properties. Herein, a new lead-free MOF, Cu2I2(TPPA) (CuI-TPPA, TPPA = tris[4-(pyridine-4-yl)phenyl]amine), with a 6-fold interpenetrated structure is designed and synthesized based on the electron donor-acceptor strategy. CuI-TPPA has a large mobility-lifetime (µτ) product of 5.8 × 10-4 cm2 V-1 and a high detection sensitivity of 73.1 µC Gyair-1 cm-2, surpassing that of commercial α-Se detectors. Moreover, the detector remains fairly stable with only a 2% reduction in photocurrent under continuous bias irradiation conditions with a total dose of over 42.83 Gyair. The CuI-TPPA/poly(vinylidene fluoride) flexible composite X-ray detector films are successfully manufactured with different thicknesses. Through multifaceted assessments, the optimal thickness is found with a high detection sensitivity of up to 143.6 µC Gyair-1 cm-2. As proof-of-concept, 11 × 9 pixelated X-ray detectors are fabricated on the same composite film to realize X-ray direct imaging. This work opens up potential applications of MOFs in environmentally friendly and wearable devices for direct X-ray detection and imaging.

High-performance cryo-temperature ionic thermoelectric liquid cell developed through a eutectic solvent strategy.

Ionic thermoelectric (i-TE) liquid cells offer an environmentally friendly, cost effective, and easy-operation route to low-grade heat recovery. However, the lowest temperature is limited by the freezing temperature of the aqueous electrolyte. Applying a eutectic solvent strategy, we fabricate a high-performance cryo-temperature i-TE liquid cell. Formamide is used as a chaotic organic solvent that destroys the hydrogen bond network between water molecules, forming a deep eutectic solvent that enables the cell to operate near cryo temperatures (down to -35 °C). After synergistic optimization of the electrode and cell structure, the as-fabricated liquid i-TE cell with cold (-35 °C) and hot (70 °C) ends achieve a high power density (17.5 W m-2) and a large two-hour energy density (27 kJ m-2). In a prototype 25-cell module, the open-circuit voltage and short-circuit current are 6.9 V and 68 mA, respectively, and the maximum power is 131 mW. The anti-freezing ability and high output performance of the as-fabricated i-TE liquid cell system are requisites for applications in frigid regions.

Polaron interfacial entropy as a route to high thermoelectric performance in DAE-doped PEDOT:PSS films.

Enhancing the thermoelectric transport properties of conductive polymer materials has been a long-term challenge, in spite of the success seen with molecular doping strategies. However, the strong coupling between the thermopower and the electrical conductivity limits thermoelectric performance. Here, we use polaron interfacial occupied entropy engineering to break through this intercoupling for a PEDOT:PSS (poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate)) thin film by using photochromic diarylethene (DAE) dopants coupled with UV-light modulation. With a 10-fold enhancement of the thermopower from 13.5 µV K-1 to 135.4 µV K-1 and almost unchanged electrical conductivity, the DAE-doped PEDOT:PSS thin film achieved an extremely high power factor of 521.28 µW m-1 K-2 from an original value of 6.78 µW m-1 K-2. The thermopower was positively correlated with the UV-light intensity but decreased with increasing temperature, indicating resonant coupling between the planar closed DAE molecule and PEDOT. Both the experiments and theoretical calculations consistently confirmed the formation of an interface state due to this resonant coupling. Interfacial entropy engineering of polarons could play a critical role in enhancing the thermoelectric performance of the organic film.

Thermally Activated Delayed Fluorescence (TADF)-active Coinage-metal Sulfide Clusters for High-resolution X-ray Imaging.

The study of facile-synthesis and low-cost X-ray scintillators with high light yield, low detection limit and high X-ray imaging resolution plays a vital role in medical and industrial imaging fields. However, the optimal balance between X-ray absorption, decay lifetime and excitonic utilization efficiency of scintillators to achieve high-resolution imaging is extremely difficult due to the inherent contradiction. Here two thermally activated delayed fluorescence (TADF)-actived coinage-metal clusters M6 S6 L6 (M=Ag or Cu) were synthesized by simple solvothermal reaction, where the cooperation of heavy atom-rich character and TADF mechanism supports strong X-ray absorption and rapid luminescent collection of excitons. Excitingly, Ag6 S6 L6 (SC-Ag) displays a high photoluminescence quantum yield of 91.6 % and scintillating light yield of 17420 photons MeV-1 , as well as a low detection limit of 208.65 nGy s-1 that is 26 times lower than the medical standard (5.5 µGy s-1 ). More importantly, a high X-ray imaging resolution of 16 lp/mm based on SC-Ag screen is demonstrated. Besides, rigid core skeleton reinforced by metallophilicity endows clusters M6 S6 L6 strong resistance to humidity and radiation. This work provides a new view for the design of efficient scintillators and opens the research door for silver clusters in scintillation application.

Methylammonium-Based Quasi-Two-Dimensional Perovskite Single Crystals for Highly Sensitive X-ray Detection and Imaging.

The strategy of introducing large organic cations into three-dimensional perovskites could reduce the dimensionality of perovskites to form quasi-two-dimensional (quasi-2D) perovskites, resulting in increased stability and reduced detection limits due to less ion migration. Herein, a quasi-2D perovskite single crystal (BDA)(MA)2Pb3Br10 (BDA = NH3C4H8NH3, MA = CH3NH3) with a layered structure was grown by the temperature-cooling solution method. The X-ray detector based on the (BDA)(MA)2Pb3Br10 single crystal has a sensitivity as high as 1984 µC Gy-1 cm-2 at 55.6 V/mm, and it could detect X-rays as low as 28.12 nGy s-1 at 22.2 V/mm. In addition, the X-ray imaging system based on the single-crystal device easily distinguishes between metals and plastics and exhibits a spatial resolution estimated as 250 µm, indicating the feasibility of (BDA)(MA)2Pb3Br10 crystals for X-ray imaging. This research offers a method for the design of quasi-2D layered perovskites and enhances photoelectronic applications in X-ray inspection and imaging.

Strategy for a Rational Design of Deep-Ultraviolet Nonlinear Optical Materials from Zeolites.

Deep-ultraviolet (DUV) nonlinear optical (NLO) materials play a crucial role in cutting-edge laser technology. In order to solve the serious layered growth tendency of the sole commercial DUV NLO crystal KBe2BO3F2 (KBBF), developing alternative systems of compounds with bulk crystal habits has become an urgent task for practical applications. Herein, a novel strategy was developed by applying non-centrosymmetric (NCS) cancrinite (CAN)-type zincophosphates {Na6(OH)2(H2O)2}Cs2[ZnPO4]6 with bulk-crystal habits as the prototype to design new DUV NLO crystals. Two new anhydrous alkali zincophosphates, namely, {(Li6 -xNaxO)A2}[(ZnPO4)6] (A = Cs, Rb; x = 2-3) crystallizing in the NCS hexagonal space group P63 (no. 173) with a CAN-type framework, were successfully synthesized via a modified fluoro-solvo-hydrothermal method by applying triethylamine (TEA) and concentrated NaF solution as a co-solvent. Interestingly, the rigidity of the NCS CAN-type framework acting as the host ensures the non-centrosymmetry of the resulting new compounds. Meanwhile, the replacement of water molecules by guest cationic species in the channels or cages can greatly improve the thermal stability of the resultant crystal and tune its NLO properties. The synergetic effect of the host framework and the guest species makes the two compounds transparent down to the DUV region (<200 nm) and exhibit SHG effects. Therefore, the proposed rational design strategy of applying the known zeotype NCS frameworks as prototypes together with the modified fluoro-solvo-hydrothermal method opens a great avenue for highly effectively exploring new DUV NLO materials.

General Figures of Merit ZQ for Thermoelectric Generators Under Constant Heat-In Flux Boundary.

The thermoelectric figure of merit ZT bridges the efficiency and material parameters for a thermoelectric device operating under constant temperature of the hot- and cold-source thermal boundary (Type-I TB). However, many application scenarios fall under the constant heat-in flux (qh ) and constant cold-source temperature (Tc ) thermal boundary (Type-II TB), for which a figure of merit is absent for more than half a century. This study aims to fill this gap and propose a figure of merit ZQD for the thermoelectric devices under the Type-II TB condition, defined as Z Q D = ( Z T c Z T c + 1 ) ( h κ ) ( q h T c ) $Z{Q}_{\mathrm{D}} = ( {\frac{{Z{T}_{\mathrm{c}}}}{{Z{T}_{\mathrm{c}} + 1}}} )( {\frac{h}{\kappa }} )( {\frac{{{q}_{\mathrm{h}}}}{{{T}_{\mathrm{c}}}}} )$ , where Z, h, and κ are the traditional figure of merit, leg height, and thermal conductivity, respectively. The effectiveness of ZQD is verified through both numerical calculations and experiments, which are more accurate and practical than ZT. Furthermore, a system-level figure of merit ZQS is suggested after considering the external thermal resistance. Finally, optimization strategies for thermoelectric systems based on ZQS are proposed, showing a 30% enhancement in the efficiency. ZQD and ZQS are expected to be widely used in the thermoelectric field.

Pseudo-2D Layered Organic-Inorganic Manganese Bromide with a Near-Unity Photoluminescence Quantum Yield for White Light-Emitting Diode and X-Ray Scintillator.

Eco-friendly lead-free organic-inorganic manganese halides (OIMHs) have attracted considerable attention in various optoelectronic applications because of their superior optical properties and flexible solution processibility. Herein, we report a novel pseudo-2D layered OIMH (MTP)2 MnBr4 (MTP: methyltriphenylphosphonium), which exhibits intense green emission under UV/blue or X-ray excitation, with a near-unity photoluminescence quantum yield, high resistance to thermal quenching (I150 °C =84.1 %) and good photochemical stability. These features enable (MTP)2 MnBr4 as an efficient green phosphor for blue-converted white light-emitting diodes, demonstrating a commercial-level luminous efficiency of 101 lm W-1 and a wide color gamut of 116 % NTSC. Moreover, these (MTP)2 MnBr4 crystals showcase outstanding X-ray scintillation properties, delivering a light yield of 67000 photon MeV-1 , a detection limit of 82.4 nGy s-1 , and a competitive spatial resolution of 6.2 lp mm-1 for X-ray imaging. This work presents a new avenue for the exploration of eco-friendly luminescent OIMHs towards multifunctional light-emitting applications.

Two Noncentrosymmetric Bismuth Phosphates: Rational Design Synthesis and Optical Properties.

Developing strategies to rational design noncentrosymmetric structure still attract much interest for their applications in nonlinear optical and piezoelectric materials. Two noncentrosymmetric (NCS) alkaline earth metal bismuth phosphates have been successfully achieved via partial replacement of Bi3+ with Ca2+ or Sr2+ ions. BiCa(H0.5PO4)2 (designated as CaBiPO) and BiSr(H0.5PO4)2 (designated as SrBiPO), together with their solid solution Bi(Sr1-xCax)(H0.5PO4)2 (0 < x ≤ 0.5), crystallize in the NCS space group C2. Both CaBiPO and SrBiPO exhibit ultraviolet nonlinear optical (NLO) properties, and their second-harmonic generation effects belong to type-II phase matching. Meanwhile, they could also act as photoluminescence hosts in which the Eu3+-doping samples SrBiPO:xEu3+ (x = 0.02-0.2) emit orange light. The effect of different radius ions on the derivative structures and the structure-NLO property relationship has also been discussed in detail.

Bottom-Up Photosynthesis of an Air-Stable Radical Semiconductor Showing Photoconductivity to Full Solar Spectrum and X-Ray.

Single-component semiconductors with photoresponse to full solar spectrum are highly desirable to simplify the device structure of commercial photodetectors and to improve solar conversion or photocatalytic efficiency but remain scarce. This work reports bottom-up photosynthesis of an air-stable radical semiconductor using BiI3 and a photochromism-active benzidine derivative as a photosensitive functional motif. This semiconductor shows photoconductivity to full solar spectrum contributed by radical and non-radical forms of the benzidine derivative. It has also the potential to detect X-rays because of strong X-ray absorption coefficient. This finding opens up a new synthetic method for radical semiconductors and may find applications on extending photoresponsive ranges of perovskites, transition metal sulfides, and other materials.

Highly Sensitive Direct X-Ray Detector Based on Copper(II) Coordination Polymer Single Crystal with Anisotropic Charge Transport.

Anisotropic charge transport plays a pivotal role in clarifying the conductivity mechanism in direct X-ray detection to improve the detection sensitivity. However, the anisotropic photoelectric effect of semiconductive single crystal responsive to X-ray is still lacking of theoretical and experimental proof. The semiconductive coordination polymers (CPs) with designable structures, adjustable functions, and high crystallinity provide a suitable platform for exploring the anisotropic conductive mechanism. Here,the study first reveals a 1D conductive transmission path for direct X-ray detection from the perspective of structural chemistry. The semiconductive copper(II)-based CP 1 single crystal detector exhibits unique anisotropic X-ray detection performance. Along the 1D π-π stacking direction, the single crystal device (1-SC-a) shows a superior sensitivity of 2697.15 µCGyair -1  cm-2 and a low detection limit of 1.02 µGyair  s-1 among CPs-based X-ray detectors. This study provides beneficial guidance and deep insight for designing high-performance CP-based X-ray detectors.

Improving X-ray Scintillating Merits of Zero-Dimensional Organic-Manganese(II) Halide Hybrids via Enhancing the Ligand Polarizability for High-Resolution Imaging.

Luminescent metal halides have been exploited as a new class of X-ray scintillators for security checks, nondestructive inspection, and medical imaging. However, the charge traps and hydrolysis vulnerability are always detrimental to the three-dimensional ionic structural scintillators. Here, the two zero-dimensional organic-manganese(II) halide coordination complexes 1-Cl and 2-Br were synthesized for improvements in X-ray scintillation. The introduction of a polarized phosphine oxide can help to increase the stabilities, especially the self-absorption-free merits of these Mn-based hybrids. The X-ray dosage rate detection limits reached up to 3.90 and 0.81 µGyair/s for 1-Cl and 2-Br, respectively, superior to the medical diagnostic standard of 5.50 µGyair/s. The fabricated scintillation films were applied to radioactive imaging with high spatial resolutions of 8.0 and 10.0 lp/mm, respectively, holding promise for use in diagnostic X-ray medical imaging.

Wide-Bandgap Rare-Earth Iodate Single Crystals for Superior X-Ray Detection and Imaging.

Semiconductor-based X-ray detectors with low detectable thresholds become critical in medical radiography applications. However, their performance is generally limited by intrinsic defects or unresolved issues of materials, and developing a novel scintillation semiconductor for low-dose X-ray detection is a highly urgent objective. Herein, a high-quality rare-earth iodate Tm(IO3 )3 single crystal grown through low-cost solution processing is reported with a wide bandgap of 4.1 eV and a large atomic number of 53.2. The roles of IO and TmO groups for charge transport in the Tm(IO3 )3 are revealed with the structural difference between the [101] and [ 1 ¯ 01 ] $[{\bar{1}}01]$ crystal orientations. Based on anisotropic responses of material properties and detection performances, it is found that the [ 1 ¯ 01 ${\bar{1}}01$ ] orientation, the path with fewer IO groups, achieves a high resistivity of 1.02 × 1011 Ω cm. Consequently, a single-crystal detector exhibits a low dark current and small baseline drifting due to the wide bandgap, high resistivity and less ion migration of Tm(IO3 )3 , resulting in a low detection limit of 85.2 nGyair s-1 . An excellent X-ray imaging performance with a high sensitivity of 4406.6 µC Gyair -1 cm-2 is also shown in the Tm(IO3 )3 device. These findings provide a new material design perspective for high-performance X-ray imaging applications.

Multiple Light Source-Excited Organic Manganese Halides for Water-Jet Rewritable Luminescent Paper and Anti-Counterfeiting.

Rewritable luminescent paper is particularly crucial, considering the ultrahigh paper consumption and confidential information security, but a highly desirable stimuli-responsive smart luminescent material with excellent water solubility has rarely been studied. Herein, a new type of rewritable paper made by highly efficient green light emissive zero-dimensional (0D) organic manganese halides is rationally designed by virtue of the reversible photoluminescence (PL) off-on switching. Specifically, the green emission can be linearly quenched by water vapor in a wide humidity range and again recovered in a dry atmosphere, which make it a smart hydrochromic PL off-on switching and humidity sensor. Benefiting from the reversible luminescence off-on switch and excellent water solubility, rewritable luminescent paper is realized through water-jet security printing technology on 0D halide-coated commercial paper with high resolution. The printed/written information can be easily cleaned by slight heating with outstanding "write-erase-write" cycle capabilities. In addition, multiple light source-induced coincident green light emissions further provide convenience to realize anti-counterfeiting, encryption and decryption of confidential information, and so forth. This work highlights the superiority of dynamic ionic-bonded 0D organic manganese halides as reversible PL switching materials in rewritable luminescent paper, high-security-level information printing, storage and protection technologies, and so forth.

Integration of negative, zero and positive linear thermal expansion makes borate optical crystals light transmission temperature-independent.

Negative and zero thermal expansion (NTE and ZTE) materials are widely adopted to eliminate the harmful effect from the "heat expansion and cool contraction" effect and frequently embrace novel fundamental physicochemical mechanisms. To date, the manipulation of NTE and ZTE materials has mainly been realized by chemical component regulation. Here, we propose another method by making use of the anisotropy of thermal expansion in noncubic single crystals, with maximal tunability from the integration of linear NTE, ZTE and positive thermal expansion (PTE). We demonstrate this concept in borate optical crystals of AEB2O4 (AE = Ca or Sr) to make the light transmission temperature-independent by counterbalancing the thermal expansion and thermo-optics coefficient. We further reveal that such a unique thermal expansion behavior in AEB2O4 arises from the synergetic thermal excitation of bond stretching in ionic [AEO8] and rotation between covalent [BO3] groups. This work has significant implications for understanding the thermal excitation of lattice vibrations in crystals and promoting the functionalization of anomalous thermal expansion materials.

5d → 4f transition of a lanthanide-activated MGa2S4 (M = Ca, Sr) semiconductor for mechanical-to-light energy conversion mediated by structural distortion.

Materials exhibiting mechanoluminescence (ML) are a class of smart materials capable of mechanical-to-light energy conversion. Thus, ML materials have been widely used in various electronic applications such as smart sensors, security systems, human-machine interfaces, and energy harvesting systems. Herein, we report a centrosymmetric ML semiconductor host material family MGa2S4 (M = Ca, Sr), which features in-layered structures constructed with unique distorted bi-tetrahedral [Ga2S2S4/2] lattice units. It exhibited similar structural characteristics to the well-known ML semiconductor host ZnS. Remarkably, the lanthanide ions of 5d → 4f transition-activated hosts showed sensitive and high ML luminance under natural lighting upon mechanical stimulation; thus, an efficient mechanical-to-light energy conversion of a self-powered display was achieved. Moreover, because of structural distortion and strain-gradient-induced electrical polarization in the ML host material upon mechanical stimulation, a ML mechanism based on the synergy effect between local electronic polarization and flexoelectricity was proposed. This study facilitates a deeper understanding of the relationship between the structure and underlying ML, and promotes further development of ML-material-based products and technologies.

Terbium doped LiLuF4 nanocrystal scintillator-based flexible composite film for high resolution X-ray imaging.

Radiographic screens are widely used in high energy physics, national defense, aviation, radiodynamic therapy and medical imaging due to their scintillation materials that can transform high-energy particles or rays into ultraviolet (UV) visible light or other signals. In recent years, lanthanide doped fluoride nanocrystals (NCs) have attracted much attention due to their excellent optical properties and stability. In this work, multiple lanthanide-doped LiLuF4 nanocrystal scintillation materials were synthesized by thermal decomposition. Among them, Tb-doped LiLuF4 nanocrystals have high X-ray sensitivity and low detection limit (36.31 nGy s-1), which is much lower than the requirement of medical imaging dose rate. After the irradiation of 42.29 mGy s-1 X-ray for 1 hour, the intensity of radioluminescence basically remained unchanged. Based on the good properties of our nanocrystals, we further prepared the flexible film of nanocomposites with epoxy resin. This kind of uniform, large area, high loaded flexible film exhibits excellent performance in X-ray imaging with a spatial resolution greater than 20 line pairs per millimeter (LP/mm).