Solid-State Electrocatalysis in Heteroatom-Doped Alloy Anode Enables Ultrafast Charge Lithium-Ion Batteries.

Electrocatalysis is generally confined to dynamic liquid-solid and gas-solid interfaces and is rarely applicable in solid-state reactions. Here, we report a paradigm shift strategy to exploit electrocatalysis to accelerate solid-state reactions in the context of lithium-ion batteries (LIBs). We employ heteroatom doping, specifically boron for silicon and sulfur for phosphorus, to catalyze electrochemical Li-alloying reactions in solid-state electrode materials. The preferential cleavage of polar dopant-host chemical bonds upon lithiation triggers chemical bond breaking of the host material. This solid-state catalysis, distinct from liquid and gas phases, requires a critical doping concentration for optimal performance. Beyond a critical concentration of ∼1 atom %, boron and sulfur doping drastically reduces activation energies and accelerates redox kinetics during lithiation/delithiation processes, leading to markedly enhanced rate performance in boron-doped silicon and sulfur-doped black/red phosphorus anode. Notably, a sulfur-doped black phosphorus anode coupled with a lithium cobalt oxide cathode achieves an ultrafast-charging battery, recharging 80% energy of a battery in 302 Wh kg-1 in 9 min, surpassing the thus far reported LIBs.

Li3PO4-Enriched SEI on Graphite Anode Boosts Li+ De-Solvation Enabling Fast-Charging and Low-Temperature Lithium-Ion Batteries.

Li+ de-solvation at solid-electrolyte interphase (SEI)-electrolyte interface stands as a pivotal step that imposes limitations on the fast-charging capability and low-temperature performance of lithium-ion batteries (LIBs). Unraveling the contributions of key constituents in the SEI that facilitate Li+ de-solvation and deciphering their mechanisms, as a design principle for the interfacial structure of anode materials, is still a challenge. Herein, we conducted a systematic exploration of the influence exerted by various inorganic components (Li2CO3, LiF, Li3PO4) found in the SEI on their role in promoting the Li+ de-solvation. The findings highlight that Li3PO4-enriched SEI effectively reduces the de-solvation energy due to its ability to attenuate the Li+-solvent interaction, thereby expediting the de-solvation process. Building on this, we engineer Li3PO4 interphase on graphite (LPO-Gr) anode via a simple solid-phase coating, facilitating the Li+ de-solvation and building an inorganic-rich SEI, resulting in accelerated Li+ transport crossing the electrode interfaces and interphases. Full cells using the LPO-Gr anode can replenish its 80 % capacity in 6.5 minutes, while still retaining 70 % of the room temperature capacity even at -20 °C. Our strategy establishes connection between the de-solvation characteristics of the SEI components and the interfacial structure design of anode materials for high performance LIBs.

Breaking Low-Strain and Deep-Potassiation Trade-Off in Alloy Anodes via Bonding Modulation for High-Performance K-Ion Batteries.

Alloy anode materials have garnered unprecedented attention for potassium storage due to their high theoretical capacity. However, the substantial structural strain associated with deep potassiation results in serious electrode fragmentation and inadequate K-alloying reactions. Effectively reconciling the trade-off between low-strain and deep-potassiation in alloy anodes poses a considerable challenge due to the larger size of K-ions compared to Li/Na-ions. In this study, we propose a chemical bonding modulation strategy through single-atom modification to address the volume expansion of alloy anodes during potassiation. Using black phosphorus (BP) as a representative and generalizing to other alloy anodes, we established a robust P-S covalent bonding network via sulfur doping. This network exhibits sustained stability across discharge-charge cycles, elevating the modulus of K-P compounds by 74%, effectively withstanding the high strain induced by the potassiation process. Additionally, the bonding modulation reduces the formation energies of potassium phosphides, facilitating a deeper potassiation of the BP anode. As a result, the modified BP anode exhibits a high reversible capacity and extended operational lifespan, coupled with a high areal capacity. This work introduces a new perspective on overcoming the trade-off between low-strain and deep-potassiation in alloy anodes for the development of high-energy and stable potassium-ion batteries.

Bifunctional Interphase Promotes Li+ De-Solvation and Transportation Enabling Fast-Charging Graphite Anode at Low Temperature.

The most successful lithium-ion batteries (LIBs) based on ethylene carbonate electrolytes and graphite anodes still suffer from severe energy and power loss at temperatures below -20 °C, which is because of high viscosity or even solidification of electrolytes, sluggish de-solvation of Li+ at the electrode surface, and slow Li+ transportation in solid electrolyte interphase (SEI). Here, a coherent lithium phosphide (Li3P) coating firmly bonding to the graphite surface to effectively address these challenges is engineered. The dense, continuous, and robust Li3P interphase with high ionic conductivity enhances Li+ transportation across the SEI. Plus, it promotes Li+ de-solvation through an electron transfer mechanism, which simultaneously accelerates the charge transport kinetics and stands against the co-intercalation of low-melting-point solvent molecules, such as propylene carbonate (PC), 1,3-dioxolane, and 1,2-dimethoxyethane. Consequently, an unprecedented combination of high-capacity retention and fast-charging ability for LIBs at low temperatures is achieved. In full-cells encompassing the Li3P-coated graphite anode and PC electrolytes, an impressive 70% of their room-temperature capacity is attained at -20 °C with a 4 C charging rate and a 65% capacity retention is achieved at -40 °C with a 0.05 C charging rate. This research pioneers a transformative trajectory in fortifying LIB performance in cryogenic environments.