RESUMO
In 2D noble metals like copper, the carrier scattering at grain boundaries has obscured the intrinsic nature of electronic transport. However, it is demonstrated that the intrinsic nature of transport by hole carriers in 2D copper can be revealed by growing thin films without grain boundaries. As even a slight deviation from the twin boundary is perceived as grain boundaries by electrons, it is only through the thorough elimination of grain boundaries that the hidden hole-like attribute of 2D single-crystal copper can be unmasked. Two types of Fermi surfaces, a large hexagonal Fermi surface centered at the zone center and the triangular Fermi surface around the zone corner, tightly matching to the calculated Fermi surface topology, confirmed by angle-resolved photoemission spectroscopy (ARPES) measurements and vivid nonlinear Hall effects of the 2D single-crystal copper account for the presence of hole carriers experimentally. This breakthrough suggests the potential to manipulate the majority carrier polarity in metals by means of grain boundary engineering in a 2D geometry.
RESUMO
Topological quantum phases are largely understood in weakly correlated systems, which have identified various quantum phenomena, such as the spin Hall effect, protected transport of helical fermions, and topological superconductivity. Robust ferromagnetic order in correlated topological materials particularly attracts attention, as it can provide a versatile platform for novel quantum devices. Here, a singular Hall response arising from a unique band structure of flat topological nodal lines in combination with electron correlation in a van der Waals ferromagnetic semimetal, Fe3GaTe2, with a high Curie temperature of Tc = 347 K is reported. High anomalous Hall conductivity violating the conventional scaling, resistivity upturn at low temperature, and a large Sommerfeld coefficient are observed in Fe3GaTe2, which implies heavy fermion features in this ferromagnetic topological material. The scanning tunneling microscopy, circular dichroism in angle-resolved photoemission spectroscopy, and theoretical calculations support the original electronic features of the material. Thus, low-dimensional Fe3GaTe2 with electronic correlation, topology, and room-temperature ferromagnetic order appears to be a promising candidate for robust quantum devices.
RESUMO
Neural networks are increasingly used to solve optimization problems in various fields, including operations research, design automation, and gene sequencing. However, these networks face challenges due to the nondeterministic polynomial time (NP)-hard issue, which results in exponentially increasing computational complexity as the problem size grows. Conventional digital hardware struggles with the von Neumann bottleneck, the slowdown of Moore's law, and the complexity arising from heterogeneous system design. Two-dimensional (2D) memristors offer a potential solution to these hardware challenges, with their in-memory computing, decent scalability, and rich dynamic behaviors. In this study, we explore the use of nonvolatile 2D memristors to emulate synapses in a discrete-time Hopfield neural network, enabling the network to solve continuous optimization problems, like finding the minimum value of a quadratic polynomial, and tackle combinatorial optimization problems like Max-Cut. Additionally, we coupled volatile memristor-based oscillators with nonvolatile memristor synapses to create an oscillatory neural network-based Ising machine, a continuous-time analog dynamic system capable of solving combinatorial optimization problems including Max-Cut and map coloring through phase synchronization. Our findings demonstrate that 2D memristors have the potential to significantly enhance the efficiency, compactness, and homogeneity of integrated Ising machines, which is useful for future advances in neural networks for optimization problems.
RESUMO
The advanced patterning process is the basis of integration technology to realize the development of next-generation high-speed, low-power consumption devices. Recently, area-selective atomic layer deposition (AS-ALD), which allows the direct deposition of target materials on the desired area using a deposition barrier, has emerged as an alternative patterning process. However, the AS-ALD process remains challenging to use for the improvement of patterning resolution and selectivity. In this study, we report a superlattice-based AS-ALD (SAS-ALD) process using a two-dimensional (2D) MoS2-MoSe2 lateral superlattice as a pre-defining template. We achieved a minimum half pitch size of a sub-10 nm scale for the resulting AS-ALD on the 2D superlattice template by controlling the duration time of chemical vapor deposition (CVD) precursors. SAS-ALD introduces a mechanism that enables selectivity through the adsorption and diffusion processes of ALD precursors, distinctly different from conventional AS-ALD method. This technique facilitates selective deposition even on small pattern sizes and is compatible with the use of highly reactive precursors like trimethyl aluminum. Moreover, it allows for the selective deposition of a variety of materials, including Al2O3, HfO2, Ru, Te, and Sb2Se3.
RESUMO
Spin-polarized bands in pristine and proximity-induced magnetic materials are promising building blocks for future devices. Conceptually new memory, logic, and neuromorphic devices are conceived based on atomically thin magnetic materials and the manipulation of their spin-polarized bands via electrical and optical methods. A critical remaining issue is the direct probe and the optimized use of the magnetic coupling effect in van der Waals heterostructures, which requires further delicate design of atomically thin magnetic materials and devices. Here, a spin-selective memtransistor with magnetized single-layered graphene on a reactive antiferromagnetic material, CrI3, is reported. The spin-dependent hybridization between graphene and CrI3 atomic layers enables the spin-selective bandgap opening in the single-layered graphene and the electric field control of magnetization in a specific CrI3 layer. The microscopic working principle is clarified by the first-principles calculations and theoretical analysis of the transport data. Reliable memtransistor operations (i.e., memory and logic device-combined operations), as well as a spin-selective probe of Landau levels in the magnetized graphene, are achieved by using the subtle manipulation of the magnetic proximity effect via electrical means.
RESUMO
This study investigated the anatomical details of the axillary and radial nerves in 50 upper limbs from 29 adult formalin-embalmed cadavers, and ten fresh upper limbs. The focus was on understanding the course, division, and ramifications of these nerves to improve treatment of shoulder dysfunction caused by axillary nerve damage. The axillary nerve divided anteriorly and posteriorly before passing the quadrangular space in all specimens, with specific distances to the first ramifications. It was found that the deltoid muscle's clavicular and acromial parts were always innervated by the anterior division of the axillary nerve, whereas the spinous part was variably innervated. The longest and thickest branches of the radial nerve to the triceps muscles were identified, with no statistically significant differences in fiber numbers among triceps branches. The study concludes that nerve transfer to the anterior division of the axillary nerve can restore the deltoid muscle in about 86% of shoulders, and the teres minor muscle can be restored by nerve transfer to the posterior division. The medial head branch and long head branch of radial nerve were identified as the best donor options.
Assuntos
Transferência de Nervo , Traumatismos dos Nervos Periféricos , Lesões do Ombro , Adulto , Humanos , Nervo Radial/cirurgia , Nervo Radial/anatomia & histologia , Ombro , Axila , Músculo Esquelético/inervação , Traumatismos dos Nervos Periféricos/cirurgia , CadáverRESUMO
The thermal Hall effect in magnetic insulators has been considered a powerful method for examining the topological nature of charge-neutral quasiparticles such as magnons. Yet, unlike the kagome system, the triangular lattice has received less attention for studying the thermal Hall effect because the scalar spin chirality cancels out between adjacent triangles. However, such cancellation cannot be perfect if the triangular lattice is distorted. Here, we report that the trimerized triangular lattice of multiferroic hexagonal manganite YMnO3 produces a highly unusual thermal Hall effect under an applied magnetic field. Our theoretical calculations demonstrate that the thermal Hall conductivity is related to the splitting of the otherwise degenerate two chiralities of its 120Ë magnetic structure. Our result is one of the most unusual cases of topological physics due to this broken Z2 symmetry of the chirality in the supposedly paramagnetic state of YMnO3, due to strong topological spin fluctuations with the additional intricacy of a Dzyaloshinskii-Moriya interaction.
RESUMO
Polymorphic 2D materials allow structural and electronic phase engineering, which can be used to realize energy-efficient, cost-effective, and scalable device applications. The phase engineering covers not only conventional structural and metal-insulator transitions but also magnetic states, strongly correlated band structures, and topological phases in rich 2D materials. The methods used for the local phase engineering of 2D materials include various optical, geometrical, and chemical processes as well as traditional thermodynamic approaches. In this Review, we survey the precise manipulation of local phases and phase patterning of 2D materials, particularly with ideal and versatile phase interfaces for electronic and energy device applications. Polymorphic 2D materials and diverse quantum materials with their layered, vertical, and lateral geometries are discussed with an emphasis on the role and use of their phase interfaces. Various phase interfaces have demonstrated superior and unique performance in electronic and energy devices. The phase patterning leads to novel homo- and heterojunction structures of 2D materials with low-dimensional phase boundaries, which highlights their potential for technological breakthroughs in future electronic, quantum, and energy devices. Accordingly, we encourage researchers to investigate and exploit phase patterning in emerging 2D materials.
RESUMO
In this study, we report on the development and testing of hydrophobic coatings using cellulose fibers. The developed hydrophobic coating agent secured hydrophobic performance over 120°. In addition, a pencil hardness test, rapid chloride ion penetration test, and carbonation test were conducted, and it was confirmed that concrete durability could be improved. We believe that this study will promote the research and development of hydrophobic coatings in the future.
RESUMO
Multi-terminal memristor and memtransistor (MT-MEMs) has successfully performed complex functions of heterosynaptic plasticity in synapse. However, theses MT-MEMs lack the ability to emulate membrane potential of neuron in multiple neuronal connections. Here, we demonstrate multi-neuron connection using a multi-terminal floating-gate memristor (MT-FGMEM). The variable Fermi level (EF) in graphene allows charging and discharging of MT-FGMEM using horizontally distant multiple electrodes. Our MT-FGMEM demonstrates high on/off ratio over 105 at 1000 s retention about ~10,000 times higher than other MT-MEMs. The linear behavior between current (ID) and floating gate potential (VFG) in triode region of MT-FGMEM allows for accurate spike integration at the neuron membrane. The MT-FGMEM fully mimics the temporal and spatial summation of multi-neuron connections based on leaky-integrate-and-fire (LIF) functionality. Our artificial neuron (150 pJ) significantly reduces the energy consumption by 100,000 times compared to conventional neurons based on silicon integrated circuits (11.7 µJ). By integrating neurons and synapses using MT-FGMEMs, a spiking neurosynaptic training and classification of directional lines functioned in visual area one (V1) is successfully emulated based on neuron's LIF and synapse's spike-timing-dependent plasticity (STDP) functions. Simulation of unsupervised learning based on our artificial neuron and synapse achieves a learning accuracy of 83.08% on the unlabeled MNIST handwritten dataset.
RESUMO
Modulating semiconducting channel potential has been used for electrical switching in transistors without biological plasticity operations that are critical for energy-efficient neuromorphic computing. To achieve efficient data processing, alternative transport mechanisms, such as tunneling and thermionic emission, have been introduced with 2D materials. Here, a polymorphic memtransistor based on atomically thin Mo0.91 W0.09 Te2 is presented, where the lattice and electronic structures of the lateral device channel can be tuned as either metallic (1T') or semiconducting (2H) phases by electrical gating. The structural and electronic phase change of the channel material, optimized in Mo0.91 W0.09 Te2 , is explored using transport and optical measurements at the device scale. Based on the phase transition, the polymorphic memtransistor demonstrates a high on/off ratio (up to 105 ), low subthreshold swing (down to 80 mV dec-1 ), and various memristive behaviors, which are distinguished from traditional phase-change memory, transistors, and passive memristors for diverse neuromorphic and in-memory computing.
RESUMO
Thermoelectric power, has been extensively studied in low-dimensional materials where quantum confinement and spin textures can largely modulate thermopower generation. In addition to classical and macroscopic values, thermopower also varies locally over a wide range of length scales, and is fundamentally linked to electron wave functions and phonon propagation. Various experimental methods for the quantum sensing of localized thermopower have been suggested, particularly based on scanning probe microscopy. Here, critical advances in the quantum sensing of thermopower are introduced, from the atomic to the several-hundred-nanometer scales, including the unique role of low-dimensionality, defects, spins, and relativistic effects for optimized power generation. Investigating the microscopic nature of thermopower in quantum materials can provide insights useful for the design of advanced materials for future thermoelectric applications. Quantum sensing techniques for thermopower can pave the way to practical and novel energy devices for a sustainable society.
RESUMO
Van der Waals (vdW) heterostructures have drawn much interest over the last decade owing to their absence of dangling bonds and their intriguing low-dimensional properties. The emergence of 2D materials has enabled the achievement of significant progress in both the discovery of physical phenomena and the realization of superior devices. In this work, the group IV metal chalcogenide 2D-layered Ge4 Se9 is introduced as a new selection of insulating vdW material. 2D-layered Ge4 Se9 is synthesized with a rectangular shape using the metalcorganic chemical vapor deposition system using a liquid germanium precursor at 240 °C. By stacking the Ge4 Se9 and MoS2 , vdW heterostructure devices are fabricated with a giant memory window of 129 V by sweeping back gate range of ±80 V. The gate-independent decay time reveals that the large hysteresis is induced by the interfacial charge transfer, which originates from the low band offset. Moreover, repeatable conductance changes are observed over the 2250 pulses with low non-linearity values of 0.26 and 0.95 for potentiation and depression curves, respectively. The energy consumption of the MoS2 /Ge4 Se9 device is about 15 fJ for operating energy and the learning accuracy of image classification reaches 88.3%, which further proves the great potential of artificial synapses.
RESUMO
The dependence of the electrical resistance on materials' geometry determines the performance of conductive nanocomposites. Here, we report the invariable resistance of a conductive nanocomposite over 30% strain. This is enabled by the in situ-generated hierarchically structured silver nanosatellite particles, realizing a short interparticle distance (4.37 nm) in a stretchable silicone rubber matrix. Furthermore, the barrier height is tuned to be negligible by matching the electron affinity of silicone rubber to the work function of silver. The stretching results in the electron flow without additional scattering in the silicone rubber matrix. The transport is changed to quantum tunneling if the barrier height is gradually increased by using different matrix polymers with smaller electron affinities, such as ethyl vinyl acetates and thermoplastic polyurethane. The tunneling current decreases with increasing strain, which is accurately described by the Simmons approximation theory. The tunable transport in nanocomposites provides an advancement in the design of stretchable conductors.
RESUMO
The microscopic origins of thermopower have been investigated to design efficient thermoelectric devices, but strongly correlated quantum states such as charge density waves and Mott insulating phase remain to be explored for atomic-scale thermopower engineering. Here, we report on thermopower and phonon puddles in the charge density wave states in 1T-TaS2, probed by scanning thermoelectric microscopy. The Star-of-David clusters of atoms in 1T-TaS2 exhibit counterintuitive variations in thermopower with broken three-fold symmetry at the atomic scale, originating from the localized nature of valence electrons and their interlayer coupling in the Mott insulating charge density waves phase of 1T-TaS2. Additionally, phonon puddles are observed with a spatial range shorter than the conventional mean free path of phonons, revealing the phonon propagation and scattering in the subsurface structures of 1T-TaS2.
RESUMO
Polymorphism allows the symmetry of the lattice and spatial charge distributions of atomically thin materials to be designed. While various polymorphs for superconducting, magnetic, and topological states have been extensively studied, polymorphic control is a challenge for robust ferroelectricity in atomically thin geometries. Here, the atomic and electric manipulation of ferroelectric polymorphs in Mo1- x Wx Te2 is reported. Atomic manipulation for polymorphic control via chemical pressure (substituting tungsten for molybdenum atoms) and charge density modulation can realize tunable polar lattice structures and robust ferroelectricity up to T = 400 K with a constant coercive field in an atomically thin material. Owing to the effective inversion symmetry breaking, the ferroelectric switching withstands a charge carrier density of up to 1.1 × 1013 cm-2 , developing an original diagram for ferroelectric switching in atomically thin materials.
RESUMO
Recent studies have intensively examined 2D materials (2DMs) as promising materials for use in future quantum devices due to their atomic thinness. However, a major limitation occurs when 2DMs are in contact with metals: a van der Waals (vdW) gap is generated at the 2DM-metal interfaces, which induces metal-induced gap states that are responsible for an uncontrollable Schottky barrier (SB), Fermi-level pinning (FLP), and high contact resistance (RC ), thereby substantially lowering the electronic mobility of 2DM-based devices. Here, vdW-gap-free 1D edge contact is reviewed for use in 2D devices with substantially suppressed carrier scattering of 2DMs with hexagonal boron nitride (hBN) encapsulation. The 1D contact further enables uniform carrier transport across multilayered 2DM channels, high-density transistor integration independent of scaling, and the fabrication of double-gate transistors suitable for demonstrating unique quantum phenomena of 2DMs. The existing 1D contact methods are reviewed first. As a promising technology toward the large-scale production of 2D devices, seamless lateral contacts are reviewed in detail. The electronic, optoelectronic, and quantum devices developed via 1D contacts are subsequently discussed. Finally, the challenges regarding the reliability of 1D contacts are addressed, followed by an outlook of 1D contact methods.
RESUMO
Tungsten disulfide (WS2) has tunable bandgaps, which are required for diverse optoelectronic device applications. Here, we report the bandgap modulation in WS2 monolayers with two-dimensional core-shell structures formed by unique growth mode in chemical vapor deposition (CVD). The core-shell structures in our CVD-grown WS2 monolayers exhibit contrasts in optical images, Raman, and photoluminescence spectroscopy. The strain and doping effects in the WS2, introduced by two different growth processes, generate PL peaks at 1.83 eV (at the core domain) and 1.98 eV (at the shell domain), which is distinct from conventional WS2 with a primary PL peak at 2.02 eV. Our density functional theory (DFT) calculations explain the modulation of the optical bandgap in our core-shell-structured WS2 monolayers by the strain, accompanying a direct-to-indirect bandgap transition. Thus, the core-shell-structured WS2 monolayers provide a practical method to fabricate lateral heterostructures with different optical bandgaps, which are required for optoelectronic applications.
RESUMO
Conventional gating in transistors uses electric fields through external dielectrics that require complex fabrication processes. Various optoelectronic devices deploy photogating by electric fields from trapped charges in neighbor nanoparticles or dielectrics under light illumination. Orbital gating driven by giant Stark effect is demonstrated in tunneling phototransistors based on 2H-MoTe2 without using external gating bias or slow charge trapping dynamics in photogating. The original self-gating by light illumination modulates the interlayer potential gradient by switching on and off the giant Stark effect where the dz 2-orbitals of molybdenum atoms play the dominant role. The orbital gating shifts the electronic bands of the top atomic layer of the MoTe2 by up to 100 meV, which is equivalent to modulation of a carrier density of 7.3 × 1011 cm-2 by electrical gating. Suppressing conventional photoconductivity, the orbital gating in tunneling phototransistors achieves low dark current, practical photoresponsivity (3357 AW-1 ), and fast switching time (0.5 ms) simultaneously.
RESUMO
2D transition metal dichalcogenides (TMDs) exhibit intriguing properties for applications in optoelectronics and electronics, among which memtransistors received extensive attention as multifunctional devices. For practical applications of 2D TMDs, large-area fabrication of the materials via reliable processes, which is in trade-off with their quality, has been a long-standing issue. Here, a simple and effective way is proposed to fabricate large-area and high-quality molybdenum disulfide thin films using MoS2 colloidal ink through a spray coating, followed by a postsulfurization process. High-quality MoS2 thin films exhibit excellent optical and electrical properties that can be utilized in field-effect transistors (FETs) and memtransistor arrays. The MoS2 FETs show an average on/off ratio of 5 × 106 and a high electron mobility of 10.34 cm2 V-1 s-1 , which can be understood by the healing of sulfur vacancies, recrystallization, and the removal of the carbon contamination of the MoS2 . These MoS2 -based memtransistors present stable operations with a high switching ratio tuned by back gate and light illumination, which is promising for multiple-levels memory and complex neuromorphic computing. This study demonstrates a new strategy to fabricate 2D TMDs with large-area and high quality for integrated optoelectronic and memory device applications.