A weakly solvating electrolyte towards practical rechargeable aqueous zinc-ion batteries.

Structure deterioration and side reaction, which originated from the solvated H2O, are the main constraints for the practical deployment of both cathode and anode in aqueous Zn-ion batteries. Here we formulate a weakly solvating electrolyte to reduce the solvating power of H2O and strengthen the coordination competitiveness of SO42- to Zn2+ over H2O. Experiment results and theoretical simulations demonstrate that the water-poor solvation structure of Zn2+ is achieved, which can (i) substantially eliminate solvated-H2O-mediated undesirable side reactions on the Zn anode. (ii) boost the desolvation kinetics of Zn2+ and suppress Zn dendrite growth as well as structure aberration of the cathode. Remarkably, the synergy of these two factors enables long-life full cells including Zn/NaV3O8·1.5H2O, Zn/MnO2 and Zn/CoFe(CN)6 cells. More importantly, practical rechargeable AA-type Zn/NVO cells are assembled, which present a capacity of 101.7 mAh and stability of 96.1% capacity retention after 30 cycles at 0.66 C.

Promoting OH- Adsorption and Diffusion Enables Ultrahigh Capacity and Rate Capability of Nickel Sulfide Cathode for Aqueous Alkaline Zn-Based Batteries.

Aqueous alkaline Zn-based batteries (AAZBs) possess great promise for large-scale applications thanks to their higher discharging plateau and unique reaction mechanism. However, the capacity and rate capability of Ni-based cathodes are still unsatisfactory due to their insufficient OH- adsorption and diffusion ability. Herein, heterostructured Ni3 S2 /Ni(OH)2 nanosheets with outstanding electrochemical performance are synthesized via a facile chemical etching strategy. The heterostructured Ni3 S2 /Ni(OH)2 nanosheet cathode shows significantly increased capacity and rate capability due to its boosted OH- adsorption and diffusion ability compared to Ni3 S2 . Consequently, the assembled Zn//Ni3 S2 /Ni(OH)2 cell can deliver an ultrahigh capacity of 2.26 mAh cm-2 , an excellent rate performance (0.91 mAh cm-2 at 100 mA cm-2 ) and a satisfying cycling stability (1.01 mAh cm-2 at 20 mA cm-2 after 500 cycles). Moreover, a prominent energy density of 3.86 mWh cm-2 is obtained, which exceeds the majority of recently reported AAZBs. This work is expected to provide a new modification direction for developing high-performance nickel sulfide cathode for AAZBs.

Tendency Regulation of Competing Reactions Toward Highly Reversible Tin Anode for Aqueous Alkaline Batteries.

Investigating dendrite-free stripping/plating anodes is highly significant for advancing the practical application of aqueous alkaline batteries. Sn has been identified as a promising candidate for anode material, but its deposition/dissolution efficiency is hindered by the strong electrostatic repulsion between Sn(OH)3 - and the substrate. Herein, this work constructs a nondense copper layer which serves as stannophile and hydrogen evolution inhibitor to adjust the tendency of competing reactions on Sn foil surface, thus achieving a highly reversible Sn anode. The interactions between the deposited Sn and the substrates are also strengthened to prevent shedding. Notably, the ratio of Sn redox reaction is significantly boosted from ≈20% to ≈100%, which results in outstanding cycling stability over 560 h at 10 mA cm-2 . A Sn//Ni(OH)2 battery device is also demonstrated with capacities from 0.94 to 22.4 mA h cm-2 and maximum stability of 1800 cycles.

Nitrogen-Rich Porous Organic Polymers with Supported Ag Nanoparticles for Efficient CO2 Conversion.

As CO2 emissions increase and the global climate deteriorates, converting CO2 into valuable chemicals has become a topic of wide concern. The development of multifunctional catalysts for efficient CO2 conversion remains a major challenge. Herein, two porous organic polymers (NPOPs) functionalized with covalent triazine and triazole N-heterocycles are synthesized through the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The NPOPs have an abundant microporous content and high specific surface area, which confer them excellent CO2 affinities with a CO2 adsorption capacity of 84.0 mg g-1 and 63.7 mg g-1, respectively, at 273 K and 0.1 MPa. After wet impregnation and in situ reductions, Ag nanoparticles were supported in the NPOPs to obtain Ag@NPOPs with high dispersion and small particle size. The Ag@NPOPs were applied to high-value conversion reactions of CO2 with propargylic amines and terminal alkynes under mild reaction conditions. The carboxylative cyclization transformation of propargylic amine into 2-oxazolidinone and the carboxylation transformation of terminal alkynes into phenylpropiolic acid had the highest TOF values of 1125.1 and 90.9 h-1, respectively. The Ag@NPOP-1 was recycled and used five times without any significant decrease in catalytic activity, showing excellent catalytic stability and durability.

Crystallization Thermodynamics of α-Lactose Monohydrate in Different Solvents.

It is common to find that some of the lactose in dairy powders and pharmaceutical tablets is present in the unstable amorphous state. Therefore, their crystallization thermodynamics in different solvents are particularly important. In this paper, the solubility of α-lactose monohydrate (α-LM) in 15 mono-solvents such as ethanol, isopropanol, methanol, 1-propanol, 1-butanol, 2-butanol, isobutanol, 1-pentanol, isoamylol, 1-hexanol, 1-heptanol, 1-octanol, propanoic acid, acetonitrile, and cyclohexanone was evaluated by using the gravimetric method in the temperature ranges from 274.05 K to 323.05 K at constant pressure (1 atm). In the given temperature range, the solubility of α-LM in these solvents increased with the rising of temperature, the highest solubility of α-LM was found in methanol (2.37 × 104), and the lowest was found in 1-hexanol (0.80 × 105). In addition, the increase of α-LM solubility in isopropanol was the largest. The sequence at 298.15 K was: methanol > 1-butanol > isopropanol > ethanol > 1-propanol > 1-heptanol > isobutanol > propionic acid > 1-pentanol > 1-octanol > acetonitrile > isoamylol > 2-butanol > cyclohexanone > 1-hexanol. Solvent effect analysis shows that the properties of α-LM are more important than those of solvents. The Apelblat equation, λh equation, Wilson model, and NRTL model were used to correlate the experimental values. The root-mean-square deviation (RMSD) and relative average deviation (RAD) of all models were less than 2.68 × 10−2 and 1.41 × 10−6, respectively, implying that the fitted values of four thermodynamic models all agreed well with the experimental values. Moreover, the thermodynamic properties of the dissolution process (i.e., dissolution Gibbs free energy (ΔdisG), molar enthalpy (ΔdisH), and molar entropy (ΔdisS)) for α-LM in selected solvents were determined. The results indicate that ΔdisH/(J/mol) (from 0.2551 to 6.0575) and ΔdisS/(J/mol/K) (from 0.0010 to 0.0207) of α-LM in these solvents are all positive, and the values of ΔdisH and ΔdisS. ΔdisG/(J/mol) (from −0.0184 to −0.6380) are all negative. The values were observed to decrease with rising temperatures, implying that α-LM dissolution is an endothermic, entropy-driven, and spontaneous process. The solid−liquid equilibrium data and dissolution thermodynamics of α-LM were obtained, which provide a basis for industrial production.

Enhanced Sunscreen Effects via Layer-By-Layer Self-Assembly of Chitosan/Sodium Alginate/Calcium Chloride/EHA.

The sunscreen nanocapsules were successfully synthesized by the way of layer-by-layer self-assembly using charged droplets (prepared by emulsification of LAD-30, Tween-80 and EHA (2-Ethylhexyl-4-dimethylaminobenzoate)) as templates. Chitosan/sodium alginate/calcium chloride were selected as wall materials to wrap EHA. The emulsions with the ratio of Tween-80 to EHA (1:1) were stable. A stable NEI negative emulsion can be obtained when the ratio of Tween-80 and LAD-30 was 9:1. Chitosan solutions (50 kDa, 0.25 mg/mL) and sodium alginate solutions (0.5 mg/mL) were selected to prepare nanocapsules. The nanocapsules were characterized via some physico-chemical methods. Based on the synergistic effects of the electrostatic interaction between wall materials and emulsifiers, EHA was effectively encapsulated. DLS and TEM showed that the sunscreen nanocapsules were dispersed in a spherical shape with nano-size, with the increasing number of assembly layers, the size increased from 155 nm (NEI) to 189 nm (NEII) to 201 nm (NEIII) and 205 nm after solidification. The release studies in vitro showed sustained release behavior of the nanocapsules were observed with the increase of the number of deposition layers, implying a good coating effect. The sunscreen nanocapsules could control less than 50% the release of EHA after crosslinking of calcium chloride and sodium alginate, which also could effectively avoid the stimulation of the sun protection agent on the skin.

Enhanced Antioxidant Activity of Fresh Fruits through Salicylic Acid/ß-CD Hydroalcoholic Gels.

Oxidation is an important cause of fruit spoilage, and therefore improving the antioxidant capacity of fresh fruits is beneficial to their preservation. Herein, fresh-cut bananas were used as a type of fresh fruit and soaked in 75% hydroalcoholic gels containing salicylic acid (SA) or SA/ß-CD inclusion complex (SA/ß-CD). After treatment, they were placed in an atmosphere at 85% relative humidity at 20 °C for 12 days. A significant reduction in spoilage in bananas treated with the hydroalcoholic gels in the presence of SA/ß-CD was observed, compared with those treated with gels in the presence or absence of SA. The free-radical-scavenging performances of SA and its complex were investigated using the DPPH (1,1-diphenyl-2-picryl-hydrazil) method. Based on the results, the significant increase in antioxidant activity was attributed to the fact that the inclusion complex could break the intramolecular hydrogen bonding of SA, thus efficiently eliminating ROS in the fruits. The formation of the inclusion complex was confirmed by experiments and theoretical calculations. Our findings indicate that treatment with SA/ß-CD can provide an efficient method of maintaining postharvest quality and extending the shelf life of bananas.

Dynamic Covalent Bonds of Si-OR and Si-OSi Enabled A Stiff Polymer to Heal and Recycle at Room Temperature.

As stiff polymers are difficult to self-heal, the balance between polymers' self-healing ability and mechanical properties is always a big challenge. Herein, we have developed a novel healable stiff polymer based on the Si-OR and Si-OSi dynamic covalent bonds. The self-healing mechanism was tested and proved by the small molecule model experiments and the contrast experiments of polymers. This polymer possesses excellent tensile, bending properties as well as room temperature self-healing abilities. Moreover, due to the sticky and shapeable properties under wetting conditions, the polymer could be used as an adhesive. Besides, even after four cycles of recycling, the polymer maintains its original properties, which meets the requirements of recyclable materials. It was demonstrated that the polymer exhibits potential application in some fields, such as recyclable materials and healable adhesives.

A quinone electrode with reversible phase conversion for long-life rechargeable aqueous aluminum-metal batteries.

The exploration of high-performance cathode candidates is of great significance for aqueous aluminum-metal batteries (AAMBs). Here, we, for the first time, report tetrachloro-1,4-benzoquinone (TCQ) as a superior organic AAMB cathode. Owing to its high reversible conversion between the carbonyl and hydroxyl groups, the TCQ cathode delivers a remarkable electrochemical performance.

Sunscreen Enhancement of Octyl Methoxycinnamate Microcapsules by Using Two Biopolymers as Wall Materials.

Octyl methoxycinnamate (OMC) is widely used as a chemical sunscreen in sunscreen cosmetics. However, its direct contact with the skin would bring certain risks, such as skin photosensitive reaction. How to improve the effect of skin photodamage protection has become a current research hotspot. Encapsulating ultraviolet (UV) filters into microcapsules is an interesting method to increase the photostability of filters. In this study, sodium caseinate (SC) and arabic gum (GA) are chosen as wall materials to prepare synergistic sunscreen microcapsules by complex coacervation technology. A series of experiments are conducted to investigate the effects of pH, wall material concentration, and wall/core ratio on the formation of OMC microcapsules. The morphology, composition, and stability of OMC microcapsules are characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The OMC microcapsule is uniform in size distribution, smooth in surface morphology, and has good thermal stability. The results show that the ultraviolet absorption of the OMC microcapsules is better than that of the uncoated OMC for the ultraviolet-B (280-320 nm). Moreover, the OMC microcapsule released 40% in 12 h, while OMC released 65%, but the sun protection factor (SPF) of the OMC microcapsule sunscreen is 18.75% higher than that of OMC. This phenomenon may be attributed to the hydrophobic interaction between SC and OMC and the electrostatic interaction between SC and GA.

Synthesis of a Stable Benzoxazole Gel from an Imine Gel for Adsorption and Catalysis.

Developing stable gel materials for adsorption and catalysis is one of the major themes of gel materials. However, it has been proven to be challenging to achieve them from small molecules. Herein, an imine gel is developed from tetra-aldehyde 4-{2,2-bis[(4-formylphenoxy)methyl]-3-(4-formylphenoxy)propoxy}benzaldehyde (A4) and 3,3'-dihydroxybenzidine (B2) based on dynamic covalent chemistry. The unstable A4B2-imine gel is further converted into a stable aromatic benzoxazole-linked A4B2-benzoxazole gel via oxidative cyclization, which has significantly improved chemical stability under acidic and basic conditions. Benefiting from the stability under acidic conditions, the A4B2-benzoxazole gel is used for Pd(II) adsorption and the adsorption capacity is 250 mg g-1. After PdCl2 immersion and reduction, palladium nanoparticles with a size distribution of 1.3-14.7 nm are encapsulated by the network structure of the stable porous benzoxazole gel matrix. The Pd@A4B2-benzoxazole gel exhibits high catalytic activity toward the reduction of toxic hexavalent chromium Cr(VI) (reaction rate constant = 0.0377 min-1), while there is no significant decrease in the catalytic efficiency after five cycles.

Immobilization of ß-CD on a Hyper-Crosslinked Polymer for the Enhanced Removal of Amines from Aqueous Solutions.

In this paper, we adopted a simple and efficient strategy to prepare a ß-cyclodextrin (ß-CD)-modified hyper-crosslinked polymer (CDM-HCP). The structures and physicochemical properties of the as-synthesized polymer were also evaluated. It was applied to the removal of anilines from aqueous solutions. The introduction of ß-CD into the hyper-crosslinked polymer significantly enhanced adsorption properties for the removal of various amines. The adsorption kinetics agreed with the pseudo-second-order mode very well. The adsorption isotherm data of p-methylaniline (p-MA) and p-aminobenzoic acid (p-ABC) were in agreement with the Langmuir isotherm, whereas aniline and p-chloroaniline (p-CA) were fitted best with the Freundlich model. The maximum adsorption capacities (qmax) determined by adsorption isotherms were 148.97 mg/g for aniline, 198.45 mg/g for p-MA, 293.71 mg/g for p-CA, and 622.91 mg/g for p-ABC, respectively. It had higher adsorption capacities than those of some commercial polymeric resins, such as XAD-4, PA66, and AB-8. The interaction mechanism was investigated by FTIR, XPS, and the ONIOM2 method. A CDM-HCP can be regenerated efficiently and used repeatedly, indicating its potential technological applications in removing organic pollutants from actual industrial effluents.

Modifying defect States in CeO2 by Fe doping: A strategy for low-temperature catalytic oxidation of toluene with sunlight.

Highly efficient, low cost and green ways to eliminate volatile organic compounds (VOCs), which are quite desirable due to the ever-increasing environmental issues. Photothermal catalytic oxidation provides a pathway for solving these problems, but its application is always limited by lack of low-cost and active catalysts. Herein, this limitation is overcome by using doping to refine defect states. As a proof of concept, hierarchical CeO2 nanorods are employed as a model material for subtle Fe doping. The results reveal that the oxygen defects facilitate activation of the OO bond and the migration and separation of the photogenerated charge carriers. By virtue of such favorable synergistic effect, a satisfactory toluene conversion (>98 %) was obtained. This work provides new insights into the design of highly effective catalysts and the construction of an economically viable process for VOC elimination.

Efficient Selective Removal of Pb(II) by Using 6-Aminothiouracil-Modified Zr-Based Organic Frameworks: From Experiments to Mechanisms.

We report an efficient, reusable, and selective 6-aminothiouracil (ATA)-modified Zr(IV)-based adsorbent (defined as UiO-66-ATA(Zr)) for lead ion removal in water. The adsorption equilibrium time and the maximum sorption capacity of UiO-66-ATA(Zr) for Pb(II) are, respectively, 120 min and 386.98 mg/g at pH 4 and 298 K. The Pb(II) removal rate reaches 96% at 60 min and exceeds 99% at the equilibrium state in the pH range of 2.0-5.8. Hill and pseudo-second-order models can well describe the sorption process. Pb(II) adsorbing onto UiO-66-ATA(Zr) is an irreversible, favorable chemisorption process with multimolecule participation and film diffusion control. The calculations of density functional theory, the experimental results, and the characterization analyses suggest that the binding mechanisms are the chelation and ion-exchange/electrostatic interactions between hydroxyl/amino/sulfhydryl groups of UiO-66-ATA(Zr) and Pb(II). Besides, UiO-66-ATA(Zr) has a better affinity to Pb(II) than the coexisting ions in water and an excellent repeatability at eight cycles of adsorption. Moreover, the thermodynamic study shows that UiO-66-ATA(Zr) adsorbing Pb(II) is an endothermic reaction. Thus, UiO-66-ATA(Zr) is a prospective sorbent for Pb(II) removal under the initiative of environmental protection and water purification, and this work may also provide an idea for industrial catalysis.

Enhancing Zn-Ion Storage Capability of Hydrated Vanadium Pentoxide by the Strategic Introduction of La3.

Hydrated vanadium pentoxide (VO) cathodes with two-dimensional bilayer structures hold great potential for advanced aqueous Zn-ion batteries (ZIBs) construction, but their further application is impeded by the poor cycling stability. Herein, to address this issue and enhance the Zn ion storage capability, La3+ with a big radius was selected to finely tune their nanostructure. The strategic introduction of La3+ to VO led to the formation of LaVO4 , which showed larger interplanar spacing, better electrical conductivity, and superior Zn-ion diffusion efficiency. These unique characteristics were beneficial in the (de)intercalation and the prevention of electrode degradation/collapse, thereby significantly strengthening the corresponding electrochemical performance. As a consequence, the cathode possessed a high specific capacity of 472.5 mAh g-1 at a current density of 0.38 A g-1 and displayed good rate performance, accompanied by enduring cycling stability (no decay after 2000 cycles). Besides, when equipped as an aqueous ZIB, it delivered an outstanding peak energy density of 341.9 Wh kg-1 and a peak power density of 3.22 kW kg-1 , surpassing most VO-based energy-storage devices.

Hybridization of CuO with Bi2MoO6 Nanosheets as a Surface Multifunctional Photocatalyst for Toluene Oxidation under Solar Irradiation.

Herein, CuO/Bi2MoO6 hybrid nanosheets were prepared as a surface multifunctional photocatalyst for gas-phase toluene oxidation with high conversion (>99%). Aberration-corrected scanning transmission electron microscopy suggested that CuO species were highly dispersed on the nanosheets. X-ray absorption fine structure spectra indicated that the distorted and stretched Cu-O coordination structures in CuO/Bi2MoO6 nanosheets would provide open active sites. In situ Fourier transform infrared and density functional theory results showed that toluene molecules could be chemisorbed and activated on the active sites of CuO/Bi2MoO6 nanosheets by the C-H group forming CuO/Bi2MoO6···Ph-CH3 surface complex compounds. These would induce electron-hole transfer and initiate photocatalytic reactions under visible light irradiation. The corresponding intermediates of benzaldehyde and benzoic acid would be detected by in situ diffuse reflectance infrared Fourier transform spectroscopy. Furthermore, the synergistic effect of CuO and Bi2MoO6 nanosheets could monitor charge dynamics to facilitate their respective transmission from photoexcitation sites to active centers. This work provides new insights into the essence of visible-light-driven surface photocatalysis and is expected to promote the design of novel and more effective photocatalysts at the molecular level.

Efficient Removal of Copper Ion from Wastewater Using a Stable Chitosan Gel Material.

: Gel adsorption is an efficient method for the removal of metal ion. In the present study, a functional chitosan gel material (FCG) was synthesized successfully, and its structure was detected by different physicochemical techniques. The as-prepared FCG was stable in acid and alkaline media. The as-prepared material showed excellent adsorption properties for the capture of Cu2+ ion from aqueous solution. The maximum adsorption capacity for the FCG was 76.4 mg/g for Cu2+ ion (293 K). The kinetic adsorption data fits the Langmuir isotherm, and experimental isotherm data follows the pseudo-second-order kinetic model well, suggesting that it is a monolayer and the rate-limiting step is the physical adsorption. The separation factor (RL) for Langmuir and the 1/n value for Freundlich isotherm show that the Cu2+ ion is favorably adsorbed by FCG. The negative values of enthalpy (ΔH°) and Gibbs free energy (ΔG°) indicate that the adsorption process are exothermic and spontaneous in nature. Fourier transform infrared (FTIR) spectroscopy and x-ray photoelectron spectroscopy (XPS) analysis of FCG before and after adsorption further reveal that the mechanism of Cu2+ ion adsorption. Further desorption and reuse experiments show that FCG still retains 96% of the original adsorption following the fifth adsorption-desorption cycle. All these results indicate that FCG is a promising recyclable adsorbent for the removal of Cu2+ ion from aqueous solution.

Two-Dimensional Cationic Networks and Their Spherical Curvature with Tunable Opening-Closing.

Despite many cationic nanomaterials that have been developed for efficient adsorption of anionic pollutants, tailoring a stable shape with denser cations on the surface for advanced removal capability remains challenging. Here, a new strategy is presented for fabricating two-dimensional (2D) cationic laminas and their curvature based on cross-linking of 2D supramolecular networks from hydrogen-bonded trimesic amide derivatives. Owing to the distribution of most cations on the surface, two cationic nanostructures from cross-linking of supramolecular networks show fast sorption kinetics for anionic pollutants. Notably, the removal capacity of the capsule-like curvature adsorbent is more than twice that of lamina  adsorbent for sufficient space around cationic sites in hollow aperture. Moreover, the capsule-like adsorbent is triggered to open and spontaneously release the adsorbed pollutants upon the addition of halogen anions, which can be recovered by subsequent dialysis. Strategy of a capsule-like pocket with tunable opening-closing will provide a new insight for storage and adsorption.

Stability, Stimuli-Responsiveness, and Versatile Sorption Properties of a Dynamic Covalent Acylhydrazone Gel.

Gel adsorbents are promising for pollutant removal from the wastewater. Herein, an acylhydrazone gel is developed from acylhydrazide-terminated pentaerythritol (PAT) and 2,4,6-triformylphloroglucinol (TFP) based on dynamic covalent acylhydrazone chemistry. PAT-TFP gel is stable under various conditions, while it shows reversible Cu2+ adsorption and desorption. PAT-TFP gel is studied as a versatile adsorbent for the capture of a range of (bulky) organic contaminants and heavy metal ions from aqueous solutions. Fast and good adsorption capacities are achieved for various dyes (rhodamine B and methyl orange), amines (aniline, p-chloroaniline, 4-methylaniline, and p-aminobenzoic acid), phenols (phenol, 1-naphthol, p-methylphenol, and bisphenol A), and metal ions (Cu2+, Cr3+, and Hg2+). The maximum adsorption capacity is 107.5 mg g-1 for Cu2+ and the equilibrium adsorption time is 30 min. PAT-TFP gel can be regenerated efficiently and used repeatedly.

Enhanced Formaldehyde Removal from Air Using Fully Biodegradable Chitosan Grafted ß-Cyclodextrin Adsorbent with Weak Chemical Interaction.

Formaldehyde (HCHO) is an important indoor air pollutant. Herein, a fully biodegradable adsorbent was synthesized by the crosslinking reaction of ß-cyclodextrin (ß-CD) and chitosan via glutaraldehyde (CGC). The as-prepared CGC showed large adsorption capacities for gaseous formaldehyde. To clarify the adsorption performance of the as-synthesized HCHO adsorbents, changing the adsorption parameters performed various continuous flow adsorption tests. It was found that the adsorption data agreed best with the Freundlich isotherm, and the HCHO adsorption kinetic data fitted well with the pseudo second order model. The breakthrough curves indicated that the HCHO adsorbing capacity of CGC was up to 15.5 mg/g, with the inlet HCHO concentration of 46.1 mg/m³, GHSV of 28 mL/min, and temperature of 20 °C. The regeneration and reusability of the adsorbent were evaluated and CGC was found to retain its adsorptive capacity after four cycles. The introduction of ß-CD was a key factor for the satisfied HCHO adsorption performance of CGC. A plausible HCHO adsorption mechanism by CGC with the consideration of the synergistic effects of Schiff base reaction and the hydrogen bonding interaction was proposed based on in situ DRIFTS studies. The present study suggests that CGC is a promising adsorbent for the indoor formaldehyde treatment.