Ear Molding in Children-Timing, Technique, and Follow-up: A Systematic Review.

Background: Nonsurgical management of congenital ear anomalies using molding devices shows efficacy but lacks standardization of treatment protocols and outcome measures. Learning Objective: To compare ear molding techniques and identify factors related to treatment outcomes. Design Type: Systematic review of the literature (1990-2021). Methods: Studies reporting molding for congenital ear anomalies were assessed. PRISMA guidelines were used. Data extracted included: age at treatment initiation, treatment duration, correction rates, and complications. Data analysis included descriptive statistics and outcomes were compared using the Student t-test. Results: In total, 37 studies with 3,341 patients (mean patients per study, 95; range, 5-488) were included. Infants in whom treatment was initiated at 4.8 weeks (median, 3.7; range, 0.9-8.8 weeks) were treated for 5.1 weeks (median 4.7, range 2.6-7.6 weeks) with 11.0 months follow-up (median 11.4, range 1.4-21.0 months). Individualized devices (physician-customized) were used more (62.2% of studies) than commercial devices. No difference in correction (p = 0.44) or complication rates (p = 0.19) was identified between devices. Totally, 70.3% of studies reported complications and 40.5% of studies included long-term follow-up data. Conclusions: The available evidence supports initiating ear molding in the first weeks of life to be most effective, yet outcome data should be standardized in future studies to improve evidence quality.

Risk of fungal exposure in the homes of patients with hematologic malignancies.

BACKGROUND: Patients with hematological malignancies are at a high risk of developing invasive fungal infections (IFI) because they undergo several cycles of treatment leading to episodes of neutropenia. In addition, they alternate between hospital stays and periods spent at home. Thus, when an IFI is diagnosed during their hospital stays, it is highly challenging to identify the origin of the fungal contamination. The objective of this study was to analyze at home fungal exposure of 20 patients with leukemia by taking air and water samples in their living residence. METHODS: Air was sampled in 3 rooms of each home with a portable air system impactor. Tap water was collected at 3 water distribution points of each home. For positive samples, fungi were identified by mass spectrometry or on the basis of their morphological features. RESULTS: 85 % of homes revealed the presence in air of Aspergillus spp. and those belonging to the section Fumigati presented the highest concentrations and the greatest frequency of isolation. Concerning mucorales, Rhizopus spp. and Mucor spp. were isolated in air of 20 % and 5 % of dwellings, respectively. In 4 homes, more than 70 % of the fungal species identified in air were potential opportunists; these were mainly Aspergillus spp. with concentrations greater than 20 cfu/m3. The water samples revealed the presence of Fusarium in 3 dwellings, with concentrations up to 80 cfu/L. Finally, for one patient, fungal species isolated during a period of hospitalization were phenotypically similar to those isolated in samples taken at home. For a second patient, a PCR Mucorale was positive on a sample of bronchoalveolar fluid while air samples taken at his home also revealed also the presence of mucorales. CONCLUSION: The presence of opportunistic fungal species in the air of all the explored homes suggests the need for strengthened preventive measures in the home of immunocompromised patients. It would be interesting to compare the fungi isolated (from patients and from their environment) by genotyping studies aimed at specifying the correspondence existing between fungal species present in the patients' homes and those responsible for IFI in the same patients.

Slime molds (Myxomycetes) causing a "disease" in crop plants and cultivated mushrooms.

Myxomycetes (plasmodial slime molds) are eukaryotic protist predators that are associated with wood, leaf litter, and soil in forests, where they feed on bacteria, protozoans, and (to a more limited extent) fungi. The health of crop plants is essential because they represent a primary food source for humans. However, when myxomycetes produce numerous fruiting bodies on the stems and leaves of crop plants, which is herein referred to as a myxomycete colonization, this has the potential of interfering with plant photosynthesis, transpiration and respiration by blocking out light and covering stomata. Myxomycetes are not pathogens, but their occurrence on plants can be mistakenly interpreted as some type of infection. However, this phenomenon has been largely ignored. This paper provides a comprehensive overview of the taxonomic and economic diversity of the organisms involved in myxomycete colonization. In addition, the various types of myxomycete colonization reported in the literature are described and discussed, a number of images provided, and cultural and chemical prevention and control measures are summarized. The latter should be of significant relevance for local production of crops and plant protective stations. While myxomycetes are not pathogens of crop plants, some species can seriously impact commercially grown mushrooms. Reports of myxomycetes affecting mushrooms are also described in this paper.

Modeling the Thermal Inactivation of Monascus ruber Ascospores Isolated from Green Olive (Arauco Cultivar) Storage Brine: An Alternative Strategy to Reduce Antifungal Chemical Agents.

Monascus ruber is an important fungus that causes spoilage in table olives, resulting in the darkening of the brine, the softening of the fruit, increased pH, and apparent mycelial growth. This study aimed to evaluate this resistance, providing a model to determine the optimal processing conditions for mitigating fungal contamination and prolonging shelf life without antifungal agents while optimizing pasteurization to reduce energy consumption. The resistance in brine (3.5% NaCl; pH 3.5) from Arauco cultivar green olives imported from Argentina was assessed. Four predictive models (log linear, log linear + shoulder, log linear + tail, log linear + shoulder + tail) estimated kinetic parameters for each survival curve. Log linear + shoulder + tail provided the best fit for 70 °C and 75 °C, with low RMSE (0.171 and 0.112) and high R2 values (0.98 and 0.99), respectively, while the log linear model was used for 80 °C. Decimal reduction times at 70, 75, and 80 °C were 24.8, 5.4, and 1.6 min, respectively, with a z-value of 8.2 °C. The current regulatory processes are insufficient to eliminate M. ruber at requisite levels, considering reduced antifungal agents.

Photopolymerizable semi-crystalline polymers for thermally reversible, 3D printable cast molds.

OBJECTIVES: This study demonstrates the use of photopolymerization to create semi-crystalline linear polymers suitable for thermally reversible materials in dental cast moldings produced from 3D printing. METHODS: An aromatic diallyl, aliphatic dithiol chain extender, and monofunctional thiol were used in a photoinitiated system. The photopolymerization and crystallization kinetics as a function of chemistry and temperature were investigated using spectroscopy and calorimetry. These insights were used to realize vat photopolymerization-based 3D printing of functional objects that could be remotely melted and thereby removed using induction heating. RESULTS: The addition of monothiol was shown to decrease the polymer molecular weight which correspondingly increased the crystallization rate. Photopolymerization kinetics are independent of temperature while crystallization was slowed as the temperature approaches the melting point of the materials. Through inclusion of chromium oxide, semicrystalline materials could be melted through induction heating. These materials were implemented in vat photopolymerization 3D printing to realize high-resolution objects that could be used as releasable dental molds following printing and induction heating. SIGNIFICANCE: This work demonstrates a proof-of-concept methodology to realize directly printable, thermally reversible semicrystalline materials for potential use as dental molding materials.

Isolation and Structure Determination of New Pyrones from Dictyostelium spp. Cellular Slime Molds Coincubated with Pseudomonas spp.

Cellular slime molds are excellent model organisms in the field of cell and developmental biology because of their simple developmental patterns. During our studies on the identification of bioactive molecules from secondary metabolites of cellular slime molds toward the development of novel pharmaceuticals, we revealed the structural diversity of secondary metabolites. Cellular slime molds grow by feeding on bacteria, such as Klebsiella aerogenes and Escherichia coli, without using medium components. Although changing the feeding bacteria is expected to affect dramatically the secondary metabolite production, the effect of the feeding bacteria on the production of secondary metabolites is not known. Herein, we report the isolation and structure elucidation of clavapyrone (1) from Dictyostelium clavatum, intermedipyrone (2) from D. magnum, and magnumiol (3) from D. intermedium. These compounds are not obtained from usual cultural conditions with Klebsiella aerogenes but obtained from coincubated conditions with Pseudomonas spp. The results demonstrate the diversity of the secondary metabolites of cellular slime molds and suggest that widening the range of feeding bacteria for cellular slime molds would increase their application potential in drug discovery.

Severe mold fungal infections in critically ill patients with COVID-19.

The SARS-CoV-2 pandemic put an unprecedented strain on modern societies and healthcare systems. A significantly higher incidence of invasive fungal co-infections was noted compared with the pre-COVID-19 era, adding new diagnostic and therapeutic challenges in the critical care setting. In the current narrative review, we focus on invasive mold infections caused by Aspergillus and Mucor species in critically ill COVID-19 patients. We discuss up-to-date information on the incidence, pathogenesis, diagnosis and treatment of these mold-COVID-19 co-infections, as well as recommendations on preventive and prophylactic interventions. Traditional risk factors were often not recognized in COVID-19-associated aspergillosis and mucormycosis, highlighting the role of other determinant risk factors. The associated patient outcomes were worse compared with COVID-19 patients without mold co-infection.

Nannostelium ampullaceum gen. et sp. nov., a tiny new member of the protosteloid amoeba of the Cavosteliida (Variosea, Amoebozoa).

Protosteloid amoebae are slime molds characterized by simple sporocarp comprised only of a stalk and typically single spore. Recent molecular phylogenetic studies showed that protosteloid amoebae are scattered among the Amoebozoa, but most of them belongs to the Variosea. The Cavosteliida is one of the largest protosteloid group of the Variosea. We have established novel protosteloid amoeba strain YIP-63 from the fruiting body of jelly fugus Auricularia sp. The strain YIP-63 is unique to have a tiny sporocarp and amoeba comparing to the other protosteloid species, and trophic amoebae forming both round and branched shape. The molecular phylogenetic analyses based on 18S rRNA gene suggest that YIP-63 represents a novel lineage in the Cavosteliida. Therefore, we propose the new genus and new species for the strain YIP-63 as Nannostelium ampullaceum gen. et sp. nov. We provide morphological and molecular data on this novel protosteloid amoeba.

Optimization of stereolithography 3D printing of microneedle micro-molds for ocular drug delivery.

Microneedles (MN) have emerged as an innovative technology for drug delivery, offering a minimally invasive approach to administer therapeutic agents. Recent applications have included ocular drug delivery, requiring the manufacture of sub-millimeter needle arrays in a reproducible and reliable manner. The development of 3D printing technologies has facilitated the fabrication of MN via mold production, although there is a paucity of information available regarding how the printing parameters may influence crucial issues such as sharpness and penetration efficacy. In this study, we have developed and optimized a 3D-printed MN micro-mold using stereolithography (SLA) 3D printing to prepare a dissolving ocular MN patch. The effects of a range of parameters including aspect ratio, layer thickness, length, mold shape and printing orientation have been examined with regard to both architecture and printing accuracy of the MN micro-mold, while the effects of printing angle on needle fidelity was also examined for a range of basic shapes (conical, pyramidal and triangular pyramidal). Mechanical strength and in vitro penetration of the polymeric (PVP/PVA) MN patch produced from reverse molds fabricated using MN with a range of shapes and height, and aspect ratios were assessed, followed by ex vivo studies of penetration into excised scleral and corneal tissues. The optimization process identified the parameters required to produce MN with the sharpest tips and highest dimensional fidelity, while the ex vivo studies indicated that these optimized systems would penetrate the ocular tissue with minimal applied pressure, thereby allowing ease of patient self-administration.

Microbiological quality of gluten-free meals, naturally gluten free foods, and gluten free-labelled products.

Background: The rising prevalence of gluten-related disorders such as celiac disease explains the increased consumption of gluten-free foods (GFF). However, these foods must be safe in terms of both gluten content and contamination by pathogenic microorganisms in order to avoid food poisoning. Objective: The objective of this study was to assess the microbiological quality of gluten-free meals, naturally gluten free foods, and gluten free-labelled products. Material and Methods: We collected 62 GFF samples including 20 meals (M-GF), 22 naturally gluten free (N-GFF) and 20 labelled (L-GFF) products, which were investigated for microbiological contamination according to Moroccan regulations guidelines, issued by the International Organization for Standardization (ISO). The analysis consisted of the detection of Salmonella and Listeria monocytogenes in each sample, and the quantification of the microbial load of the following six micro-organisms: total aerobic mesophilic flora, total coliforms, fecal coliforms, Staphylococcus aureus, Sulphite-Reducing Anaerobic, and yeasts and molds. Results: A total of 372 analyses were carried out, showing a microbiological contamination rate of 5.1%. This contamination concerned N-GFF in 8.3% (predominantly with yeasts and molds), and meals prepared at home in 11.7 (predominantly with Staphylococcus aureus and coliforms). Only one case (0.8%) of contamination was observed in products labelled gluten-free and no contamination was noticed in meals prepared in food services. Listeria monocytgenes and Salmonella were not detected in any samples of food analyzed. These results indicate a good compliance of L-GFP and M-GF prepared in food services, while unsatisfactory quality was observed in N-GFF and M-GF prepared at home. Conclusion: Therefore, rigorous hygienic practices and adequate corrective measures should be considered by celiac patients, especially regarding the N-GFF and M-GF prepared at home.

The Use of Additive Manufacturing Techniques in the Development of Polymeric Molds: A Review.

The continuous growth of additive manufacturing in worldwide industrial and research fields is driven by its main feature which allows the customization of items according to the customers' requirements and limitations. There is an expanding competitiveness in the product development sector as well as applicative research that serves special-use domains. Besides the direct use of additive manufacturing in the production of final products, 3D printing is a viable solution that can help manufacturers and researchers produce their support tooling devices (such as molds and dies) more efficiently, in terms of design complexity and flexibility, timeframe, costs, and material consumption reduction as well as functionality and quality enhancements. The compatibility of the features of 3D printing of molds with the requirements of low-volume production and individual-use customized items development makes this class of techniques extremely attractive to a multitude of areas. This review paper presents a synthesis of the use of 3D-printed polymeric molds in the main applications where molds exhibit a major role, from industrially oriented ones (injection, casting, thermoforming, vacuum forming, composite fabrication) to research or single-use oriented ones (tissue engineering, biomedicine, soft lithography), with an emphasis on the benefits of using 3D-printed polymeric molds, compared to traditional tooling.

An inexpensive moist chamber culture technique for finding microbiota on live tree bark.

Premise: Traditional moist chamber cultures (MCs) prepared in aseptic laboratory environments using sterile Petri dishes are commonly used to quantify the microbiota of rough-bark tree species and woody vines. MCs are typically expensive and may be difficult to make, so a less expensive option made from easily available supplies was developed. These cost-friendly MCs were compared with standard laboratory methods to demonstrate their efficacy. Methods and Results: Modified MCs were made using inexpensive, store-bought supplies; compared to a standard laboratory setting, the modified MCs are shown to be less expensive with a faster setup time and larger size that facilitates a variety of tree and woody vine species. MC use resulted in the discovery of new species of fungi and myxomycetes with associated locality records. We provide detailed instructions for creating modified MCs, as well as a list of myxomycete species and their associated bark characteristics, pH values, and water-holding capacity. Conclusions: This new, low-cost MC technique makes the study of microbiota more inclusive and accessible for those in research laboratories, classrooms, and homes, including both amateurs and professionals. MCs are easy to prepare, versatile, and applicable for many areas of botany and the biological sciences, potentially allowing exploration into unexplored areas in urban ecosystems.

Starter molds and multi-enzyme catalysis in koji fermentation of soy sauce brewing: A review.

Soy sauce is a traditional fermented food produced from soybean and wheat under the action of microorganisms. The soy sauce brewing process mainly involves two steps, namely koji fermentation and moromi fermentation. In the koji fermentation process, enzymes from starter molds, such as protease, aminopeptidase, carboxypeptidase, l-glutaminase, amylase, and cellulase, hydrolyze the protein and starch in the raw ingredients to produce short-chain substances. However, the enzymatic reactions may be diminished after being subjected to moromi fermentation due to its high NaCl concentration. These enzymatically hydrolyzed products are further metabolized by lactic acid bacteria and yeasts during the moromi fermentation process into organic acids and aromatic compounds, giving soy sauce a unique flavor. Thus, the starter molds, such as Aspergillus oryzae, Aspergillus sojae, and Aspergillus niger, and their secreted enzymes play crucial roles in soy sauce brewing. This review comprehensively covers the characteristics of the starter molds mainly used in soy sauce brewing, the enzymes produced by starter molds, and the roles of enzymes in the degradation of raw material. We also enumerate current problems in the production of soy sauce, aiming to offer some directions for the improvement of soy sauce taste.

Microbiota associated with commercial dry-aged beef in France.

Meat dry aging consists in storing unpackaged meat in a cold room, and at a specific and controlled relative humidity (RH), for a period of 1 to 5 weeks or more. This practice has become widespread in recent years due to its positive effect on the tenderness of the meat but also on other organoleptic characteristics and therefore its market value. The objective of this work was to study the bacterial and fungal microbiota of dry-aged beef at the commercial stage by both culture-dependent and -independent approaches. Fifty-eight samples of dry-aged meat from different producer types (meat processing plants, artisanal and supermarket butchers) were studied. The dry-aging conditions (temperature, RH) of the meats, as well as the surface pH and aw, were measured. The main microbial groups were enumerated by culture on various dedicated media. Concerning fungi, isolates of yeasts and molds (n = 257) were identified after dereplication by FTIR spectroscopy and/or sequencing of taxonomically relevant genes (26S rDNA, ITS, ß-tubulin, actin). Metagenetic analyzes targeting the V3-V4 regions of 16S rDNA and ITS2 were also performed. Overall, ripening practices were diversified with temperatures and RH between 0.5 and 2.8 °C (median = 2 °C) and 47 and 88 % (median = 70 %), respectively. The aerobic colony count varied between 1.97 and 10.91 log10 CFU/g (median = 8.32 log10 CFU/g) and was similar to that of Pseudomonas spp., indicating that this bacterial group was dominant. Yeast populations varied between <2 and 9.41 log10 CFU/g, while molds showed abundances between <2 and 7.7 log10 TFU/g, the highest values being found in meats matured with a high RH. Bacterial and mold counts were positively correlated with the dry-aging RH and, to a lesser extent, temperature. The main yeast species were Candida zeylanoides and Yarrowia alimentaria as well as Itersonilia pannonica (identified only in metagenetics). The dominant mold species were psychrophilic or psychrotrophic species, namely Mucor complex flavus and Helycostylum elegans/pulchrum that have already been shown to be associated with dry-aged beef meat. This study has identified the main microorganisms associated with dry-aged meat in France, which raises the question of their role in the organoleptic quality of these higher value products.

In vitro activity of manogepix and comparators against infrequently encountered yeast and mold isolates from the SENTRY Surveillance Program (2017-2022).

Manogepix is a potent new antifungal agent targeting the fungal Gwt1 enzyme. Manogepix has previously demonstrated potent in vitro activity against clinical isolates of both Candida (except Candida krusei) and Aspergillus species. This study determined the in vitro activity of manogepix and comparators against a large collection of infrequently encountered yeast and molds. Manogepix demonstrated potent in vitro activity against infrequently encountered yeasts exhibiting elevated MIC values to other drug classes, including Candida spp. (MIC50/90, 0.008/0.12 mg/L), Saprochaete clavata (Magnusiomyces clavatus) (MIC50/90, 0.03/0.06 mg/L), Magnusiomyces capitatus (MICrange, 0.016-0.06 mg/L), Rhodotorula minuta (MIC, 0.016 mg/L), and Rhodotorula mucilaginosa (MIC50/90, 0.03/0.12 mg/L). Similarly, manogepix was active against infrequently encountered mold isolates and strains exhibiting elevated MIC/MEC values to echinocandins, azoles, and amphotericin B, including Coprinopsis cinerea (MEC, 0.004 mg/L), Fusarium spp. (MEC50/90, 0.016/0.06 mg/L), Fusarium (Gibberella) fujikuroi species complex (MEC50/90, 0.016/0.03 mg/L), Lomentospora prolificans (MEC50/90, 0.03/0.06 mg/L), Microascus cirrosus (MEC, 0.008 mg/L), Paecilomyces spp. (MEC50/90, ≤0.008/0.016 mg/L), Pleurostomophora richardsiae (MEC, 0.06 mg/L), Sarocladium kiliense (MEC range, 0.016-0.12 mg/L), and Scedosporium spp. (MEC50/90, 0.03/0.06 mg/L). Manogepix demonstrated potent activity against a majority of the infrequently encountered yeast and mold isolates tested including strains with elevated MIC/MEC values to other drug classes. Additional clinical development of manogepix (fosmanogepix) in difficult-to-treat, resistant fungal infections is warranted.

Exposure to airborne mycotoxins: the riskiest working environments and tasks.

OBJECTIVES: There is growing interest in the role of airborne mycotoxins in occupational environments, however, their impact on human health still remains poorly investigated. This review aims to provide a comprehensive analysis of the existing literature on the occurrence of inhalable mycotoxins in working environments to investigate which sectors and tasks are at greater risk of exposure. METHODS: We have performed a systematic search in the PubMed, Scopus and Web of Science databases from 2010 to date, without limitation of geographic location. RESULTS: Database searches yielded 350 articles. After the removal of duplicates and applying our inclusion and exclusion criteria, 31 papers remained. Results show that the most exposed workers are those engaged in activities related to animal care and management and, in particular, in feeding tasks, while harvester cleaning seems to be the activity with the highest levels of exposure in agriculture. In healthcare settings mycotoxin concentrations are low but HVAC systems can be a source of contamination and this reinforces the relevance of further studies in this sector. The most common scenario is the exposure to multiple mycotoxins with variable concentrations depending on the working environment, the products handled or the tasks performed by workers. Some authors emphasize the importance of multi-approach sampling and analysis protocols to achieve an accurate and more realistic risk characterization. CONCLUSIONS: Results brought forward by this review can be utilized by health and safety professionals to recognize activities in which workers may be potentially exposed to airborne mycotoxins and thus undertake suitable preventive and protective measures.

Surgical training of minimally invasive mitral valve repair on a patient-specific simulator improves surgical skills.

OBJECTIVES: Minimally invasive mitral valve repair (MVR) is considered one of the most challenging operations in cardiac surgery and requires much practice and experience. Simulation-based surgical training might be a method to support the learning process and help to flatten the steep learning curve of novices. The purpose of this study was to show the possible effects on learning of surgical training using a high-fidelity simulator with patient-specific mitral valve replicas. METHODS: Twenty-five participants were recruited to perform MVR on anatomically realistic valve models during different training sessions. After every session their performance was evaluated by a surgical expert regarding accuracy and duration for each step. A second blinded rater similarly assessed the performance after the study. Through repeated documentation of those parameters, their progress in learning was analysed, and gains in proficiency were evaluated. RESULTS: Participants showed significant performance enhancements in terms of both accuracy and time. Their surgical skills showed sizeable improvements after only 1 session. For example, the time to implant neo-chordae decreased by 24.64% (354 s-264 s, P < 0.001) and the time for annuloplasty by 4.01% (54 s-50 s, P = 0.165), whereas the number of irregular stitches for annuloplasty decreased from 52% to 24%.The significance of simulation-based surgical training as a tool for acquiring and training surgical skills was reviewed positively. CONCLUSIONS: The results of this study indicate that simulation-based surgical training is a valuable and effective method for learning reconstructive techniques of minimally invasive MVR and overall general dexterity.The novel learning and training options should be implemented in the surgical traineeship for systematic teaching of various surgical skills.

The Role of Adjuvant Systemic and Intravitreal Corticosteroids in Fungal Endophthalmitis Treatment.

Endophthalmitis refers to inflammation involving internal ocular structures, including the anterior and posterior eye segments, associated with infectious agents, most commonly bacteria and fungi. This review focuses on endophthalmitis caused by fungi. Medical and surgical management are the two main treatment modalities for fungal endophthalmitis, with medical management utilizing systemic or intravitreal antifungals. The use of systemic or intravitreal corticosteroids as an adjuvant treatment to dampen the severity of inflammation is controversial. Based on the pathobiology of fungal endophthalmitis as well as the mechanism of action of corticosteroids, it was hypothesized that corticosteroids affected the immune response against fungal infection. In vitro studies mostly carried out during the 1980s showed that dexamethasone plays a role in the suppression of phagocytosis of yeasts and demonstrated the facilitation of yeast proliferation by dexamethasone. In vivo studies analysis was compromised entirely of retrospective studies describing steroid use in fungal endophthalmitis, with the outcomes of the patients in these studies varying greatly and often being anecdotally noted, thus difficult to discern any definitive results. Given the limited clinical data and the heterogeneity of the existing studies, additional experimentation human studies with clinical trials or observations over more extended periods analyzing the effect of systemic and intravitreal corticosteroids in fungal endophthalmitis are needed before definitive conclusions can be drawn.

Fungi-derived natural antioxidants.

In humans, exogenous antioxidants aid the endogenous antioxidant system to detoxify excess ROS generated during oxidative stress, thereby protecting the body against various diseases and stressful conditions. The majority of natural antioxidants available on the consumer market are plant-based; however, fungi are being recognized as alternative sources of various natural antioxidants such as polysaccharides, pigments, peptides, sterols, phenolics, alkaloids, and flavonoids. In addition, some exogenous antioxidants are exclusively found in fungi. Fungi-derived antioxidants exhibit scavenging activities against DPPH, ABTS, hydroxyl, superoxide, hydrogen peroxide, and nitric oxide radicals in vitro. Furthermore, in vivo models, application of fungal-derived antioxidants increase the level of various antioxidant enzymes, such as catalases, superoxide dismutases, and glutathione peroxidases, and reduce the level of malondialdehyde. Therefore, fungi-derived antioxidants have potential to be used in the food, cosmetic, and pharmaceutical industries. This review summarizes the antioxidant potential of different fungi (mushrooms, yeasts, and molds)-derived natural compounds such as polysaccharides, pigments, peptides, ergothioneine, ergosterol, phenolics, alkaloids, etc.

Microbial Pathogens in Aquaponics Potentially Hazardous for Human Health.

The union of aquaculture and hydroponics is named aquaponics-a system where microorganisms, fish and plants coexist in a water environment. Bacteria are essential in processes which are fundamental for the functioning and equilibrium of aquaponic systems. Such processes are nitrification, extraction of various macro- and micronutrients from the feed leftovers and feces, etc. However, in aquaponics there are not only beneficial, but also potentially hazardous microorganisms of fish, human, and plant origin. It is important to establish the presence of human pathogens, their way of entering the aforementioned systems, and their control in order to assess the risk to human health when consuming plants and fish grown in aquaponics. Literature analysis shows that aquaponic bacteria and yeasts are mainly pathogenic to fish and humans but rarely to plants, while most of the molds are pathogenic to humans, plants, and fish. Since the various human pathogenic bacteria and fungi found in aquaponics enter the water when proper hygiene practices are not applied and followed, if these requirements are met, aquaponic systems are a good choice for growing healthy fish and plants safe for human consumption. However, many of the aquaponic pathogens are listed in the WHO list of drug-resistant bacteria for which new antibiotics are urgently needed, making disease control by antibiotics a real challenge. Because pathogen control by conventional physical methods, chemical methods, and antibiotic treatment is potentially harmful to humans, fish, plants, and beneficial microorganisms, a biological control with antagonistic microorganisms, phytotherapy, bacteriophage therapy, and nanomedicine are potential alternatives to these methods.