Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 1.019
Filtrar
1.
Sci. agric ; 802023.
Artigo em Inglês | LILACS-Express | VETINDEX | ID: biblio-1498039

Resumo

ABSTRACT: Increasingly, fast-growing forest plantations are able to support the wood supply but may simultaneously reduce water availability. The trade-off between wood production and water supply is more evident in areas with low water availability, high seasonal variation, or high water demand from local communities. The management regime adopted in forest plantations can either increase or reduce this trade-off. Thus, we assess herein the water and wood supply under different fast-growing forest plantation management regimes to understand how forest management practices can balance the provision of these services. The study was conducted at two catchments with a predominance of fast-growing forest plantations, namely, the mosaic management catchment (MMC) and the intensive management catchment (IMC). Rainfall and streamflow were monitored for three water years. Hydrological indexes were calculated to assess the hydrological regime of both catchments, and make inventories of the forest to assess forest growth rates. MMC had streamflow coefficients, baseflow index and baseflow stability higher than those of IMC. Mean annual wood increment was 32.73 m3 ha-1 yr-1 in MMC, with a mean age of 15 years, and 44.40 m3 ha-1 yr-1 in IMC at coppice in the second year. MMC hydrological indexes remained stable over the period studied, while in IMC the hydrological indexes were affected by climatic variations, mainly in drier years. MMC showed potential for supplying both water and wood. However, in IMC there was a trade-off between wood supply at the expense of the water supply. Thus, the intensity of fast-growing management can be adjusted to achieve a balance between water and wood supply on a catchment scale.

2.
Sci. agric ; 80: e20210148, 2023. tab, graf, mapa
Artigo em Inglês | VETINDEX | ID: biblio-1361163

Resumo

Increasingly, fast-growing forest plantations are able to support the wood supply but may simultaneously reduce water availability. The trade-off between wood production and water supply is more evident in areas with low water availability, high seasonal variation, or high water demand from local communities. The management regime adopted in forest plantations can either increase or reduce this trade-off. Thus, we assess herein the water and wood supply under different fast-growing forest plantation management regimes to understand how forest management practices can balance the provision of these services. The study was conducted at two catchments with a predominance of fast-growing forest plantations, namely, the mosaic management catchment (MMC) and the intensive management catchment (IMC). Rainfall and streamflow were monitored for three water years. Hydrological indexes were calculated to assess the hydrological regime of both catchments, and make inventories of the forest to assess forest growth rates. MMC had streamflow coefficients, baseflow index and baseflow stability higher than those of IMC. Mean annual wood increment was 32.73 m³ ha-¹ yr-¹ in MMC, with a mean age of 15 years, and 44.40 m³ ha-¹ yr-¹ in IMC at coppice in the second year. MMC hydrological indexes remained stable over the period studied, while in IMC the hydrological indexes were affected by climatic variations, mainly in drier years. MMC showed potential for supplying both water and wood. However, in IMC there was a trade-off between wood supply at the expense of the water supply. Thus, the intensity of fast-growing management can be adjusted to achieve a balance between water and wood supply on a catchment scale.


Assuntos
Madeira/crescimento & desenvolvimento , Madeira/economia , Florestas , Conservação dos Recursos Hídricos
3.
Ciênc. rural (Online) ; 53(3): e20210467, 2023. tab, ilus
Artigo em Inglês | VETINDEX | ID: biblio-1412100

Resumo

This study evaluated the effects of thermal modification at different temperatures and for different durations on the mechanical strength of wood of selected species from an agroforestry system. To this end, three 9-year-old (approximate age) individuals, each from four species of forest trees-Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla hybrid, and Schizolobium parahyba (Vell.) Blake-were evaluated. After obtaining initial measurements, samples from the four species under went heat treatment for 2 h and 4 h and were subsequently subjected to heat using an oven at temperatures 120°C, 150°C, 180°C, and 210°C; respectively, in addition to the control. For evaluating mechanical strength, the technical standard ASTM D 143-94 was used to obtain the values of the moduli of elasticity and rupture, tension at the proportional limit, and maximum force of the subjects. It was observed that different durations and temperatures altered the mechanical strength of the wood of the four species studied. The 2 h residence time is the most recommended for conducting thermal modification. This procedure modifies the mechanical resistance of wood in a positive manner, with exposure temperatures ranging between 120 ºC and 180 ºC being the most recommended. The thermal treatment carried out for 4 h is not recommended for structural purposes because of the decrease in flexural strength


O objetivo do presente estudo foi avaliar o efeito da modificação térmica em diferentes tempos e temperaturas na resistência mecânica da madeira de espécies provenientes de um sistema agroflorestal. Para tanto, foram avaliados três indivíduos de Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla e Schizolobium parahyba (Vell.) Blake, todos com nove anos de idade. Após o dimensionamento, as amostras passaram pelo processo de modificação térmica durante 2h e 4h realizado em estufa nas temperaturas de 120 °C, 150 °C, 180 °C e 210 °C, além da testemunha. Para avaliação da resistência mecânica, seguiu-se a norma técnica ASTM D 143-94, obtendo-se os valores de módulos de elasticidade e ruptura, tensão no limite proporcional e força máxima. Observou-se que os diferentes tempos e temperaturas alteram a resistência mecânica das quatro espécies estudadas. O tempo de 2 h de permanência é o mais recomendado para a realização da modificação térmica. O procedimento modifica a resistência mecânica da madeira de uma forma positiva, sendo que as temperaturas de exposição que variaram entre 120 °C e 180 ºC são as mais recomendadas. A modificação térmica realizada pelo período de 4 h não é recomendada para fins estruturais, pelo fato do decréscimo da resistência à flexão.


Assuntos
Madeira/análise , Florestas
4.
Sci. agric ; 80: e20220161, 2023. mapas, tab, graf
Artigo em Inglês | VETINDEX | ID: biblio-1427806

Resumo

The Caatinga biome in Brazil comprises the largest and most continuous expanse of the seasonally dry tropical forest (SDTF) worldwide; nevertheless, it is among the most threatened and least studied, despite its ecological and biogeographical importance. The spatial distribution of volumetric wood stocks in the Caatinga and the relationship with environmental factors remain unknown. Therefore, this study intends to quantify and analyze the spatial distribution of wood volume as a function of environmental variables in Caatinga vegetation in Bahia State, Brazil. Volumetric estimates were obtained at the plot and fragment level. The multiple linear regression techniques were adopted, using environmental variables in the area as predictors. Spatial modeling was performed using the geostatistical kriging approach with the model residuals. The model developed presented a reasonable fit for the volume m3 ha with r2 of 0.54 and Root Mean Square Error (RMSE) of 10.9 m3 ha­1. The kriging of ordinary residuals suggested low error estimates in unsampled locations and balance in the under and overestimates of the model. The regression kriging approach provided greater detailing of the global wood volume stock map, yielding volume estimates that ranged from 0.01 to 109 m3 ha­1. Elevation, mean annual temperature, and precipitation of the driest month are strong environmental predictors for volume estimation. This information is necessary to development action plans for sustainable management and use of the Caatinga SDTF in Bahia State, Brazil.(AU)


Assuntos
Madeira/análise , Brasil , Modelos Lineares , Titulometria , Dispersão Vegetal
5.
Ciênc. rural (Online) ; 53(3): e20210467, 2023. tab, graf
Artigo em Inglês | LILACS-Express | VETINDEX | ID: biblio-1384571

Resumo

ABSTRACT: This study evaluated the effects of thermal modification at different temperatures and for different durations on the mechanical strength of wood of selected species from an agroforestry system. To this end, three 9-year-old (approximate age) individuals, each from four species of forest trees-Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla hybrid, and Schizolobium parahyba (Vell.) Blake-were evaluated. After obtaining initial measurements, samples from the four species under went heat treatment for 2 h and 4 h and were subsequently subjected to heat using an oven at temperatures 120°C, 150°C, 180°C, and 210°C; respectively, in addition to the control. For evaluating mechanical strength, the technical standard ASTM D 143-94 was used to obtain the values of the moduli of elasticity and rupture, tension at the proportional limit, and maximum force of the subjects. It was observed that different durations and temperatures altered the mechanical strength of the wood of the four species studied. The 2 h residence time is the most recommended for conducting thermal modification. This procedure modifies the mechanical resistance of wood in a positive manner, with exposure temperatures ranging between 120 ºC and 180 ºC being the most recommended. The thermal treatment carried out for 4 h is not recommended for structural purposes because of the decrease in flexural strength.


RESUMO: O objetivo do presente estudo foi avaliar o efeito da modificação térmica em diferentes tempos e temperaturas na resistência mecânica da madeira de espécies provenientes de um sistema agroflorestal. Para tanto, foram avaliados três indivíduos de Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla e Schizolobium parahyba (Vell.) Blake, todos com nove anos de idade. Após o dimensionamento, as amostras passaram pelo processo de modificação térmica durante 2h e 4h realizado em estufa nas temperaturas de 120 °C, 150 °C, 180 °C e 210 °C, além da testemunha. Para avaliação da resistência mecânica, seguiu-se a norma técnica ASTM D 143-94, obtendo-se os valores de módulos de elasticidade e ruptura, tensão no limite proporcional e força máxima. Observou-se que os diferentes tempos e temperaturas alteram a resistência mecânica das quatro espécies estudadas. O tempo de 2 h de permanência é o mais recomendado para a realização da modificação térmica. O procedimento modifica a resistência mecânica da madeira de uma forma positiva, sendo que as temperaturas de exposição que variaram entre 120 °C e 180 ºC são as mais recomendadas. A modificação térmica realizada pelo período de 4 h não é recomendada para fins estruturais, pelo fato do decréscimo da resistência à flexão.

6.
Ciênc. rural (Online) ; 53(9): e20210865, 2023. ilus, tab
Artigo em Inglês | VETINDEX | ID: biblio-1418346

Resumo

The growing worldwide demand in the pulp market has fostered research that evaluates alternative fiber sources with specific characteristics that attend the needs of the consumer market, with a view to add value to the final product and reduce production costs. Acacia mearnsii De Wild wood is a by-product of the extraction of tannin from the trunk bark, used for firewood, charcoal and pellets. However, its wood is still poorly studied, especially its anatomical characteristics, which can provide important information about its industrial potential. This study evaluated the anatomical characteristics of Acacia mearnsii wood for the production of pulp and paper. Ten trees at approximately seven years old were cut down, five from the seed production area (SPA) and five from the clonal population area (CPA). From each tree, one trunk disc was sectioned at the diameter at breast height (DBH), resulting in 10 (ten) wood samples. From each disc, a sapwood specimen was made oriented in the tangential longitudinal, radial longitudinal and transversal planes, for later obtaining the anatomical cuts and the macerates. The anatomical description of the wood followed the recommendations of the International Association of Wood Anatomists-IAWA. From the dimensions of the fibers, their quality evaluation ratios for the production of pulp and paper were calculated. Results obtained from the anatomical characterization allowed to conclude that the Acacia mearnsii woods from SPA and CPA are indicated as a source of raw material for the pulp and paper production.


A crescente demanda mundial do mercado de polpa celulósica tem fomentado pesquisas que avaliem fontes de fibras alternativas com características específicas que atendam às necessidades do mercado consumidor, visando agregar valor ao produto final e reduzir os custos de produção. No estado do Rio Grande do Sul, Brasil, o lenho de Acacia mearnsii De Wild é considerado um subproduto da extração de tanino da casca do tronco, utilizada como lenha, carvão e pellets. No entanto, ainda é pouco estudado, em especial suas características anatômicas, as quais podem fornecer informações importantes sobre suas potencialidades industriais. O presente estudo teve como objetivo avaliar as características anatômicas do lenho de Acacia mearnsii para a produção de celulose e papel. Foram coletadas dez árvores com aproximadamente sete anos de idade, sendo cinco provenientes da área de produção de sementes (APS) e cinco da área de povoamento clonal (APC). De cada árvore, foi seccionado um disco do tronco na altura do DAP, resultando em dez amostras de lenho. De cada disco, foi confeccionado um corpo de prova do alburno, orientado nos planos longitudinal tangencial, longitudinal radial e transversal, para posterior obtenção dos cortes anatômicos e dos macerados. A descrição anatômica do lenho seguiu as recomendações da Associação Internacional de Anatomistas da Madeira-IAWA. A partir das dimensões das fibras, foram calculados os seus índices de avaliação da qualidade para a produção de celulose e papel. Os resultados obtidos da caracterização anatômica permitiram concluir que os lenhos de Acacia mearnsii provenientes de APS e APC são indicados como matérias-primas para a produção de celulose e papel.


Assuntos
Indústria de Papel e Celulose , Acacia/anatomia & histologia
7.
Acta amaz ; 53(1): 1-8, 2023. ilus, tab, graf
Artigo em Inglês | VETINDEX | ID: biblio-1414143

Resumo

In Brazil, all transport and storage of native forest products and by-products must be registered within the DOF (Document of Forestry Origin) system. This computerized platform exists to support control agencies in reducing the sale of forest products obtained illegally. However, this tool still shows only modest results in fulfilling its objectives, since gaps in the system allow illegal wood to be acquired and enter the system as legal wood. The objective of this study was to test whether the volumetric yield coefficient (CRV) of a sawmill on an industrial scale corresponds to the 35% established by Brazilian legislation. The focus was directed at a loophole that allows the accumulation of virtual credits in the DOF system by turning logs into lumber. For this purpose, we estimated the sawmill's CRV and mean percentage yield of 19 commercial species used by a timber company in the Brazilian Amazon with a sample size of 90 logs. The estimated CRV was 24.6 ± 2.4, showing 9.9% uncertainty. The mean CRV differed highly significantly (p < 0.001) from that proposed by the DOF, with a 10.35% difference. Based on these results, the difference between the observed yield and that proposed by the legislation can generate the accumulation of virtual log credits. With this accumulation, managers encounter difficulties in acquiring new logging permits and, consequently, do not meet the actual demand for logs to the sawmill's capacity.(AU)


No Brasil, todo transporte e armazenamento de produtos e subprodutos florestais nativos deve ser registrado no sistema DOF (Documento de Origem Florestal). Essa plataforma informatizada existe para apoiar agências de controle na redução da venda de produtos florestais obtidos ilegalmente. No entanto, essa ferramenta ainda apresenta resultados modestos no cumprimento de seus objetivos, uma vez que lacunas no sistema permitem que madeira ilegal adquira caráter legal. O objetivo desse estudo foi testar se o coeficiente de rendimento volumétrico (CRV) de uma serraria em escala empresarial corresponde aos 35% estabelecidos pela legislação brasileira. O foco foi direcionado para uma brecha que permite o acúmulo de créditos virtuais no sistema DOF, por meio da transformação de toras em material serrado. Para tanto, estimamos o CRV da serraria e os rendimentos percentuais médios de 19 espécies comercializadas por uma empresa de base florestal na Amazônia brasileira, com um esforço amostral de 90 toras. O CRV estimado foi de 24,6 ± 2,4, mostrando incerteza de 9,9%. O CRV médio diferiu altamente significativamente (p < 0,001) do proposto pelo DOF, com uma diferença de 10,35%. Com base nesses resultados, a diferença entre o rendimento observado e o proposto pela legislação pode gerar um acúmulo de créditos em toras virtuais. Com esse acúmulo, os gestores enfrentam dificuldades para adquirir novas licenças de exploração e, consequentemente, não atendem à real demanda por toras da capacidade instalada de sua serraria.(AU)


Assuntos
Madeira/análise , Titulometria/instrumentação , Gerenciamento de Resíduos/legislação & jurisprudência , Ofícios
8.
Braz. j. biol ; 83: e237813, 2023. tab
Artigo em Inglês | LILACS, VETINDEX | ID: biblio-1278553

Resumo

Abstract Bamboo (Bambusa sp.) is a grass species with high potential for exploitation, however, this raw material is easily attacked by xylophagous agents such as Coleoptera. The objective of this study is thus to analyse the presence of wood-boring beetles associated with Bambusa sp. in Alta Floresta, Mato Grosso, Brazil. The study was carried out in a bamboo plantation, from August 2016 to July 2017. Two models of ethanolic traps were used, PET Santa Maria and ESALQ-84. Three families of wood-boring beetles were observed in this study: Bostrichidae, Cerambycidae and Curculionidae. 2,144 individuals were identified, belonging to 19 species, in four subfamilies and 11 tribes, and the species Xyleborus affinis was the most frequently collected. Thus, this study constitutes an important contribution to the knowledge of coleoborers associated with bamboo plantations, with the registration of the occurrence of species, as well as contributing to the knowledge of the entomofauna associated with species cultivated in the Southern Amazon.


Resumo O bambu (Bambusa sp.) é uma espécie de gramínea com alto potencial de exploração de fibras, no entanto, essa matéria-prima é facilmente atacada por agentes xilófagos, como os coleópteros. O objetivo deste estudo foi analisar a presença de besouros associados a Bambusa sp. em Alta Floresta, Mato Grosso, Brasil. O estudo foi realizado em um plantio de bambu, no período de agosto de 2016 a julho de 2017. Foram utilizados dois modelos de armadilhas etanólicas, o PET Santa Maria e ESALQ-84. Três famílias de coleobrocas foram observadas neste estudo: Bostrichidae, Cerambycidae e Curculionidae. Foram identificados 2,144 indivíduos, pertencentes a 19 espécies, em quatro subfamílias e 11 tribos, e Xyleborus affinis foi a espécie com maior número de indivíduos coletados. Assim, este estudo constitui-se em uma importante contribuição para o conhecimento de coleobrocas associadas a plantios de bamboo, com o registro de ocorrência de espécies, bem como contribui para o conhecimento da entomofauna associada a espécies cultivadas na Amazônia Meridional.


Assuntos
Animais , Besouros , Bambusa , Gorgulhos , Madeira , Brasil
9.
Ciênc. rural (Online) ; 53(3): e20210289, 2023. tab, graf
Artigo em Inglês | LILACS-Express | VETINDEX | ID: biblio-1384565

Resumo

ABSTRACT: Brazil has the world's second largest forest area, which makes the exploitation and use of varied species in civil construction conducive. One of the traditional uses of wood is to build roofs for different purposes. Considering that the most recurrent pathologies in the roof structures are related to the excessive deformations observed in the structural elements, particularly in those subjected to bending. This study verified the effective representativeness of the stiffness value established by the Brazilian Class wood standard, C40. Batches of eight different tropical wood species were considered, whose framing occurred in the referred Class. Results obtained from the confidence intervals for each evaluated species led to the conclusion that the value of 19500 MPa for the modulus of elasticity is not representative for Class C40 because the value observed in this study was 14467 MPa, which is 26% lower than the normative reference. This observation is an initial indication that the adoption of the value of 19500 MPa by the standard is unfavorable to the safety of the structure, justifying the pathologies observed in the service performance of the roof structures.


RESUMO: O Brasil é o segundo maior país em área de florestas no mundo, o que torna propícia a exploração e uso de espécies variadas na construção civil. Um dos usos tradicionais da madeira se dá nos telhados das edificações para as mais diferentes finalidades. Tendo em vista que as patologias mais recorrentes nas estruturas de cobertura estão relacionadas às deformações excessivas verificadas nos elementos estruturais, principalmente nos sujeitos à flexão, o presente trabalho teve como objetivo verificar a efetiva representatividade do valor médio do módulo de elasticidade na compressão paralela estabelecido pela norma brasileira para madeiras da Classe C40. Foram considerados lotes de oito diferentes espécies de madeira tropicais, cujo enquadramento se deu na referida Classe. Os resultados obtidos dos intervalos de confiança para cada espécie avaliada possibilitaram concluir que o valor de 19500 MPa para o módulo de elasticidade não é representativo para a Classe C40, pois o valor encontrado nessa pesquisa foi 14467 MPa, resultado esse 26% inferior à referência normativa. Essa constatação é um indicativo inicial de que a adoção do valor de 19500 MPa pela norma é desfavorável à segurança da estrutura, justificando as patologias observadas no desempenho em serviço das estruturas de cobertura.

10.
Ciênc. rural (Online) ; 53(9): e20220137, 2023. graf, tab
Artigo em Inglês | VETINDEX | ID: biblio-1418785

Resumo

This article analyzed the international competitiveness of exports of forest products from 2008 to 2018. The information is available in the Food and Agriculture Organization (FAO) and the indicators used were: revealed comparative advantage (RCA), trade openness index (Oi) and the contribution to trade balance index (CTB). Results showed that the exportation of forest products are competitive, in addition gains in competitiveness have been observed by the RCA and in Europe, countries had losses in detriment of the financial crises and austerity measures adopted. All countries showed a low degree of openness by the Oi and had a comparative advantage by the CTB, except for China and Germany. It is concluded that the countries with bigger comparative advantages in the exportation of forest products were the ones that had contributed more for its commercial balance.


Este artigo analisou a competitividade internacional das exportações de produtos florestais, de 2008 e 2018. As informações estão disponíveis na Organização das Nações Unidas para Agricultura e Alimento (FAO) e os indicadores utilizados foram: vantagem comparativa revelada (RCA), o índice de abertura do comércio (Oi) e o índice de contribuição ao saldo comercial (CTB). Os resultados mostram que as exportações de produtos florestais são competitivas, ademais foram observados pelo RCA ganhos em competitividade e na Europa, os países tiveram perdas em detrimento das crises financeiras e medidas de austeridade adotadas. Todos os países apresentaram baixo grau de abertura pelo Oi e teve vantagem comparativa pelo CTB, com exceção da China e Alemanha. Conclui-se que os países com maiores vantagens comparativas nas exportações de produtos florestais foram os que mais contribuíram para o seu saldo comercial.


Assuntos
Madeira/economia , Agricultura Florestal/economia , Comercialização de Produtos , Exportação de Produtos
11.
Ciênc. rural (Online) ; 53(3): e20210289, 2023. tab, ilus
Artigo em Inglês | VETINDEX | ID: biblio-1412097

Resumo

Brazil has the world's second largest forest area, which makes the exploitation and use of varied species in civil construction conducive. One of the traditional uses of wood is to build roofs for different purposes. Considering that the most recurrent pathologies in the roof structures are related to the excessive deformations observed in the structural elements, particularly in those subjected to bending. This study verified the effective representativeness of the stiffness value established by the Brazilian Class wood standard, C40. Batches of eight different tropical wood species were considered, whose framing occurred in the referred Class. Results obtained from the confidence intervals for each evaluated species led to the conclusion that the value of 19500 MPa for the modulus of elasticity is not representative for Class C40 because the value observed in this study was 14467 MPa, which is 26% lower than the normative reference. This observation is an initial indication that the adoption of the value of 19500 MPa by the standard is unfavorable to the safety of the structure, justifying the pathologies observed in the service performance of the roof structures.


O Brasil é o segundo maior país em área de florestas no mundo, o que torna propícia a exploração e uso de espécies variadas na construção civil. Um dos usos tradicionais da madeira se dá nos telhados das edificações para as mais diferentes finalidades. Tendo em vista que as patologias mais recorrentes nas estruturas de cobertura estão relacionadas às deformações excessivas verificadas nos elementos estruturais, principalmente nos sujeitos à flexão, o presente trabalho teve como objetivo verificar a efetiva representatividade do valor médio do módulo de elasticidade na compressão paralela estabelecido pela norma brasileira para madeiras da Classe C40. Foram considerados lotes de oito diferentes espécies de madeira tropicais, cujo enquadramento se deu na referida Classe. Os resultados obtidos dos intervalos de confiança para cada espécie avaliada possibilitaram concluir que o valor de 19500 MPa para o módulo de elasticidade não é representativo para a Classe C40, pois o valor encontrado nessa pesquisa foi 14467 MPa, resultado esse 26% inferior à referência normativa. Essa constatação é um indicativo inicial de que a adoção do valor de 19500 MPa pela norma é desfavorável à segurança da estrutura, justificando as patologias observadas no desempenho em serviço das estruturas de cobertura.


Assuntos
Madeira , Indústria da Construção , Florestas , Módulo de Elasticidade
12.
Rev. Ciênc. Agrovet. (Online) ; 22(1): 123-126, mar. 2023. tab
Artigo em Inglês | VETINDEX | ID: biblio-1426382

Resumo

The demand for products from wood has been expanding, because of this, there is a need for studies related to the quality and application of these materials. Thus, the present research aimed to evaluate theextractive and cellulose content of Ipê wood submitted to the thermal modification process. To carry out the study, fourindividuals of Handroanthus chrysotrichus(Mart. ex DC.) Mattos, 11 years old, were slaughtered. Subsequently, samples measuring 2.5 x2.5 x 41 cm were prepared and placed in an oven with forced air circulation, at temperatures of 120, 150, 180 and 210 ºC, for a period of 4 h. Then, random portions of the specimens were sectioned and ground in a knife mill, and then, sieved in the 40/60 mesh fraction, to carry out the chemical tests of total extractives and cellulose content. The data were processed and submitted to the Tukey average test, using the R software. The results of the chemical properties studied indicated variations according to the temperatures, not showing a stabilization trend between the treatments applied. A relationship between the behavior of these properties and the other technological characteristics of the works available in the literature was observed. In general, further studies are recommendedon the chemical properties of wood of this species associatedwith the application of high temperatures.(AU)


A demanda de produtos oriundos da madeira vem se expandindo, por conta disso, há a necessidade de estudosrelacionados à qualidade e aplicação desses materiais. Com isso, a presente pesquisa teve como objetivo avaliaro teor de extrativos e de celulose da madeirade Ipê submetida ao processo de modificação térmica. Para realização do estudo foram abatidos quatroindivíduos de Handroanthuschrysotrichus (Mart. ex DC.) Mattos, com 11 anos de idade. Posteriormente, confeccionaram-se amostras de 2,5 x 2,5 x 41 cm, as quais foram acondicionadas em estufa com circulação de ar forçada, nas temperaturas de 120, 150, 180 e 210 ºC, por um período de 4 h. Em seguida, porções aleatórias dos corpos de prova foram seccionadas e trituradas em moinho de facas, e então, peneiradas nafração de 40/60 mesh, para arealização dos ensaios químicos de teor de extrativos totais e teor de celulose. Os dados foram processados e submetidos ao teste de médias de Tukey, utilizando o software R. Os resultados das propriedades químicas estudadas indicaramvariações de acordo com as temperaturas, não apresentando uma tendência de estabilização entre os tratamentos aplicados. Uma relação entre o comportamento dessas propriedades com as demais características tecnológicas dos trabalhos disponíveis na literatura foi observada. De modo geral, são recomendados mais estudos acerca das propriedades químicas da madeira dessa espécie associados a aplicação de altas temperaturas.(AU)


Assuntos
Celulose/análise , Tabebuia/fisiologia , Tratamento Térmico
13.
Braz. j. biol ; 832023.
Artigo em Inglês | LILACS-Express | LILACS, VETINDEX | ID: biblio-1469036

Resumo

Abstract Bamboo (Bambusa sp.) is a grass species with high potential for exploitation, however, this raw material is easily attacked by xylophagous agents such as Coleoptera. The objective of this study is thus to analyse the presence of wood-boring beetles associated with Bambusa sp. in Alta Floresta, Mato Grosso, Brazil. The study was carried out in a bamboo plantation, from August 2016 to July 2017. Two models of ethanolic traps were used, PET Santa Maria and ESALQ-84. Three families of wood-boring beetles were observed in this study: Bostrichidae, Cerambycidae and Curculionidae. 2,144 individuals were identified, belonging to 19 species, in four subfamilies and 11 tribes, and the species Xyleborus affinis was the most frequently collected. Thus, this study constitutes an important contribution to the knowledge of coleoborers associated with bamboo plantations, with the registration of the occurrence of species, as well as contributing to the knowledge of the entomofauna associated with species cultivated in the Southern Amazon.


Resumo O bambu (Bambusa sp.) é uma espécie de gramínea com alto potencial de exploração de fibras, no entanto, essa matéria-prima é facilmente atacada por agentes xilófagos, como os coleópteros. O objetivo deste estudo foi analisar a presença de besouros associados a Bambusa sp. em Alta Floresta, Mato Grosso, Brasil. O estudo foi realizado em um plantio de bambu, no período de agosto de 2016 a julho de 2017. Foram utilizados dois modelos de armadilhas etanólicas, o PET Santa Maria e ESALQ-84. Três famílias de coleobrocas foram observadas neste estudo: Bostrichidae, Cerambycidae e Curculionidae. Foram identificados 2,144 indivíduos, pertencentes a 19 espécies, em quatro subfamílias e 11 tribos, e Xyleborus affinis foi a espécie com maior número de indivíduos coletados. Assim, este estudo constitui-se em uma importante contribuição para o conhecimento de coleobrocas associadas a plantios de bamboo, com o registro de ocorrência de espécies, bem como contribui para o conhecimento da entomofauna associada a espécies cultivadas na Amazônia Meridional.

14.
Anim. Reprod. (Online) ; 20(1): e20230009, 2023. tab, ilus
Artigo em Inglês | VETINDEX | ID: biblio-1425267

Resumo

The cryopreservation of jaguar semen must be improved to produce high-quality biobanking doses. Until now, the rare studies of semen freezing in the species have only evaluated glycerol, always with a significant reduction in sperm quality in thawed semen. The purpose of this study was to assess the efficacy of three cryoprotectants, dimethylsulfoxide (DMSO), glycerol (GLY), and methanol (MET), in the cryopreservation of jaguar semen in an LDL-based extender, as well as the effect of thawing temperature on dosage quality. Five mature males with a history of reproduction were used. On the males, an infrared thermal image (IRT) was captured, the spicules and testes were analyzed, and the CASA system was used to evaluate the quality of fresh and thawed sperm. The superficial IRT was 4.6 ± 1.2 °C cooler than the anal sphincter, and the semen measured between 27.3 and 28.7 °C shortly after exiting the urethra. The total motility of fresh sperm was 55.3 ± 22.6%, and progressive motility was 36.3 ± 18%. The total motility of thawed sperm was 5.28 ± 2.51%, 4.49 ± %2.49, and 0.51 ± 0.62% for DMSO, GLY, and MET, respectively. DMSO and GLY performed better than MET, and there was no difference in thawing temperature (37°C 30 s vs. 50°C 12 s). All animals exhibit a considerable level of morphological changes in sperm. Low amounts of total and progressive motility were found in the thawed sperm. Males with a high level of sperm morphological changes were found to be fertile, but the lone male with normospermia was infertile. Thus, we contest the applicability of the commonly used morphological classification for bovines to felid species.(AU)


Assuntos
Animais , Masculino , Criopreservação , Crioprotetores/análise , Panthera , Preservação do Sêmen/métodos , Dimetil Sulfóxido/análise , Metanol/análise , Glicerol/análise
15.
Braz. j. biol ; 83: 1-5, 2023. tab
Artigo em Inglês | LILACS, VETINDEX | ID: biblio-1468820

Resumo

Bamboo (Bambusa sp.) is a grass species with high potential for exploitation, however, this raw material is easily attacked by xylophagous agents such as Coleoptera. The objective of this study is thus to analyse the presence of wood-boring beetles associated with Bambusa sp. in Alta Floresta, Mato Grosso, Brazil. The study was carried out in a bamboo plantation, from August 2016 to July 2017. Two models of ethanolic traps were used, PET Santa Maria and ESALQ-84. Three families of wood-boring beetles were observed in this study: Bostrichidae, Cerambycidae and Curculionidae. 2,144 individuals were identified, belonging to 19 species, in four subfamilies and 11 tribes, and the species Xyleborus affinis was the most frequently collected. Thus, this study constitutes an important contribution to the knowledge of coleoborers associated with bamboo plantations, with the registration of the occurrence of species, as well as contributing to the knowledge of the entomofauna associated with species cultivated in the Southern Amazon.


O bambu (Bambusa sp.) é uma espécie de gramínea com alto potencial de exploração de fibras, no entanto, essa matéria-prima é facilmente atacada por agentes xilófagos, como os coleópteros. O objetivo deste estudo foi analisar a presença de besouros associados a Bambusa sp. em Alta Floresta, Mato Grosso, Brasil. O estudo foi realizado em um plantio de bambu, no período de agosto de 2016 a julho de 2017. Foram utilizados dois modelos de armadilhas etanólicas, o PET Santa Maria e ESALQ-84. Três famílias de coleobrocas foram observadas neste estudo: Bostrichidae, Cerambycidae e Curculionidae. Foram identificados 2,144 indivíduos, pertencentes a 19 espécies, em quatro subfamílias e 11 tribos, e Xyleborus affinis foi a espécie com maior número de indivíduos coletados. Assim, este estudo constitui-se em uma importante contribuição para o conhecimento de coleobrocas associadas a plantios de bamboo, com o registro de ocorrência de espécies, bem como contribui para o conhecimento da entomofauna associada a espécies cultivadas na Amazônia Meridional.


Assuntos
Animais , Bambusa , Besouros/classificação , Besouros/crescimento & desenvolvimento
16.
Braz. J. Biol. ; 83: 1-5, 2023. tab
Artigo em Inglês | VETINDEX | ID: vti-765397

Resumo

Bamboo (Bambusa sp.) is a grass species with high potential for exploitation, however, this raw material is easily attacked by xylophagous agents such as Coleoptera. The objective of this study is thus to analyse the presence of wood-boring beetles associated with Bambusa sp. in Alta Floresta, Mato Grosso, Brazil. The study was carried out in a bamboo plantation, from August 2016 to July 2017. Two models of ethanolic traps were used, PET Santa Maria and ESALQ-84. Three families of wood-boring beetles were observed in this study: Bostrichidae, Cerambycidae and Curculionidae. 2,144 individuals were identified, belonging to 19 species, in four subfamilies and 11 tribes, and the species Xyleborus affinis was the most frequently collected. Thus, this study constitutes an important contribution to the knowledge of coleoborers associated with bamboo plantations, with the registration of the occurrence of species, as well as contributing to the knowledge of the entomofauna associated with species cultivated in the Southern Amazon.(AU)


O bambu (Bambusa sp.) é uma espécie de gramínea com alto potencial de exploração de fibras, no entanto, essa matéria-prima é facilmente atacada por agentes xilófagos, como os coleópteros. O objetivo deste estudo foi analisar a presença de besouros associados a Bambusa sp. em Alta Floresta, Mato Grosso, Brasil. O estudo foi realizado em um plantio de bambu, no período de agosto de 2016 a julho de 2017. Foram utilizados dois modelos de armadilhas etanólicas, o PET Santa Maria e ESALQ-84. Três famílias de coleobrocas foram observadas neste estudo: Bostrichidae, Cerambycidae e Curculionidae. Foram identificados 2,144 indivíduos, pertencentes a 19 espécies, em quatro subfamílias e 11 tribos, e Xyleborus affinis foi a espécie com maior número de indivíduos coletados. Assim, este estudo constitui-se em uma importante contribuição para o conhecimento de coleobrocas associadas a plantios de bamboo, com o registro de ocorrência de espécies, bem como contribui para o conhecimento da entomofauna associada a espécies cultivadas na Amazônia Meridional.(AU)


Assuntos
Animais , Besouros/classificação , Besouros/crescimento & desenvolvimento , Bambusa
17.
Braz. j. biol ; 83: e272252, 2023. tab, graf
Artigo em Inglês | VETINDEX | ID: biblio-1505856

Resumo

Cerambycidae beetles limit production and establishment of forest and fruit trees. Oncideres cervina Thomson, 1868 (Coleoptera: Cerambycidae) is one of the most important species. The objective was to record O. cervina girdling branches of Persea americana Mill. (Lauraceae) for the first time, check the number of oviposition incisions (Noi) as a function of the diameter of branch sections, period of emergence, and describe the larval-pupal chamber. Individuals of O. cervina were observed, for the first time, in P. americana orchards in Santa Maria, Rio Grande do Sul, Brazil. The middle section of branches (40-60 cm interval) had higher number of incisions. Girdled branches with a diameter of 40-50 mm had higher number of them. Adults emerged from November through January. Larval-pupal boreholes had diameters between 9 and 11 mm, and average tunnel length was 28 mm, with a mean volume of consumed wood of 4.3 mL. This information is useful for establishing integrated pest management practices against O. cervina in P. americana since this crop has a high added value and can be significantly compromised by attack by Cerambycidae beetles.


Os besouros da família Cerambycidae limitam a produção e o estabelecimento de essências florestais e frutíferas. Oncideres cervina Thomson, 1868 (Coleoptera: Cerambycidae) é uma das espécies mais importantes. O objetivo foi registrar O. cervina danificando ramos de Persea americana Mill. (Lauraceae) pela primeira vez, verificar o número de incisões de postura em relação ao diâmetro das secções dos ramos, período de emergência e descrever a galeria larval-pupal. Indivíduos de O. cervina foram observados pela primeira vez em pomares de P. americana em Santa Maria, Rio Grande do Sul, Brasil. A secção média dos ramos (intervalo de 40-60 cm) apresentou maior número de incisões. Ramos danificados com diâmetro de 40-50 mm tiveram maior número delas. Adultos emergiram de novembro a janeiro. Os orifícios larvais-pupais tinham diâmetros entre 9 e 11 mm, e o comprimento médio da galeria era de 28 mm, com um volume médio de madeira consumida de 4,3 mL. Essas informações são úteis para estabelecer práticas integradas de manejo de pragas contra O. cervina em P. americana, já que essa cultura tem alto valor agregado e pode ser significativamente comprometida pelo ataque de besouros da família Cerambycidae.


Assuntos
Besouros , Controle de Pragas , Pragas da Agricultura , Persea/parasitologia
18.
Braz. j. biol ; 83: e245807, 2023. tab, graf
Artigo em Inglês | LILACS, VETINDEX | ID: biblio-1285613

Resumo

Abstract Linum usitatissimum L is a widely used traditionally for multiple ailments. The present research was carried out to explore the antimicrobial, and anti-biofilm activity of crude extract of Linum usitatissimum L (Lu. Cr). Phytochemical and proximate analyses were performed. The bandages of diabetic foot patients were collected from the various hospitals. The bandages were cultured to isolate the bacterial strains present on it. The disc diffusion method was used to identify the antimicrobial potential whereas the minimum inhibitory concentration of the Lu.Cr were also determined. Proximate analysis confirms moisture content 8.33%, ash content 4.33%, crude protein 21.20%, crude fat 49.2% and crude fiber 5.63%. It was revealed that Gram-positive bacteria are most prevalent among all study groups. Lu.Cr possess significant bactericidal potential against S. aureus among all other microbes. Owing to this potential, linseed coated bandages can be used alternatively for the treatment of diabetic foot.


Resumo Linum usitatissimum L é amplamente utilizado tradicionalmente para doenças múltiplas. O presente trabalho foi realizado para explorar a atividade antimicrobiana e antibiofilme do extrato bruto de Linum usitatissimum L (Lu.Cr). Foram realizadas análises fitoquímicas e aproximadas. As ataduras de pacientes diabéticos com pé foram recolhidas nos vários hospitais. As bandagens foram cultivadas para isolar as cepas bacterianas presentes nas mesmas. O método de difusão em disco foi utilizado para identificar o potencial antimicrobiano e a concentração inibitória mínima do Lu.Cr também foi determinada. A análise aproximada confirma o teor de umidade 8,33%, teor de cinzas 4,33%, proteína bruta 21,20%, gordura bruta 49,2% e fibra bruta 5,63%. Foi revelado que as bactérias Gram-positivas são mais prevalentes entre todos os grupos de estudo. Lu.Cr possui potencial bactericida significativo contra S. aureus entre todos os outros micróbios. Devido a esse potencial, as ligaduras revestidas com linhaça podem ser utilizadas alternativamente para o tratamento do pé diabético.


Assuntos
Humanos , Pé Diabético/tratamento farmacológico , Linho , Diabetes Mellitus , Staphylococcus aureus , Extratos Vegetais/farmacologia , Testes de Sensibilidade Microbiana , Biofilmes , Metanol
19.
Braz. j. biol ; 83: e243332, 2023. tab, graf
Artigo em Inglês | LILACS, VETINDEX | ID: biblio-1345537

Resumo

Abstract The present study was aimed to manifest the antibacterial and antifungal activity of methanolic extracts of Salix alba L. against seven Gram-positive and Gram-negative bacterial pathogens e.g. Streptococcus pyogenes, Staphylococcus aureus (1), S. aureus (2), Shigella sonnei, Escherichia coli (1), E. coli (2) and Neisseria gonorrhoeae and three fungal isolates from the air such as Aspergillus terreus, A. ornatus, and Rhizopus stolonifer. Two different serotypes of S. aureus and E. coli were used. The agar well-diffusion method results showed the dose-dependent response of plant extracts against bacterial and fungal strains while some organisms were found resistant e.g. E. coli (1), S. sonnei, A. terreus and R. stolonifer. The highest antibacterial activity was recorded at 17.000±1.732 mm from 100 mg/mL of leaves methanolic extracts against S. pyogenes while the activity of most of the pathogens decreased after 24 h of incubation. The highest antifungal activity was reported at 11.833±1.0 mm against A. ornatus at 50 mg/mL after 48 h of the incubation period. These experimental findings endorse the use of S. alba in ethnopharmacological formulations and suggest the use of methanolic extracts of the said plant to develop drugs to control the proliferation of resistant disease causing pathogenic microbes.


Resumo O presente estudo teve como objetivo manifestar a atividade antibacteriana e antifúngica de extratos metanólicos de Salix alba L. contra sete patógenos bacterianos Gram-positivos e Gram-negativos. Streptococcus pyogenes, Staphylococcus aureus (1), S. aureus (2), Shigella sonnei, Escherichia coli (1), E. coli (2) e Neisseria gonorrhoeae e três isolados de fungos do ar, como Aspergillus terreus, A. ornatus, e Rhizopus stolonifer. Dois sorotipos diferentes de S. aureus e E. coli foram usados. Os resultados do método de difusão em ágar mostraram a resposta dependente da dose de extratos de plantas contra cepas de bactérias e fungos, enquanto alguns organismos foram considerados resistentes, e.g. E. coli (1), S. sonnei, A. terreus e R. stolonifer. A maior atividade antibacteriana foi registrada em 17.000 ± 1.732 de 100 mg/mL de extratos metanólicos de folhas contra S. pyogenes, enquanto a atividade da maioria dos patógenos diminuiu após 24 h de incubação. A maior atividade antifúngica foi relatada em 11,833 ± 1,0 contra A. ornatus a 50 mg/mL após 48 h do período de incubação. Esses achados experimentais endossam o uso de S. alba em formulações etnofarmacológicas e sugerem o uso de extratos metanólicos da referida planta para o desenvolvimento de fármacos que controlem a proliferação de doenças resistentes que causam micróbios patogênicos.


Assuntos
Salix , Antifúngicos/farmacologia , Aspergillus , Rhizopus , Staphylococcus aureus , Extratos Vegetais/farmacologia , Testes de Sensibilidade Microbiana , Metanol , Escherichia coli , Antibacterianos/farmacologia
20.
Artigo em Português | VETINDEX | ID: biblio-1428500

Resumo

A Esporotricose é uma micose subcutânea de caráter zoonótico causada pelo fungo Sporothrix schenckii que habita o solo, palhas, vegetais e também madeiras, podendo ser transmitido por meio de materiais contaminados, como farpas ou espinhos. Contudo os animais infectados e em especial os gatos, também transmitem a doença, por meio de arranhões, mordidas e contato direto com pele lesionada. Nos mamíferos, o quadro clínico apresenta-se na forma crônica ou aguda com o surgimento de lesões cutâneas. A doença é considerada um problema de saúde pública, pois afeta a população de áreas endêmicas. O presente trabalho foi delineado para analisar a manifestação da doença em gatos domésticos, revisando sinais clínicos, diagnóstico, prevenção, tratamento e também faz um alerta para a sua importância em saúde pública.(AU)


Sporotrichosis is a zoonotic subcutaneous mycosis caused by the fungus Sporothrix schenckii that inhabits the soil, straw, vegetables and also wood, and can be transmitted through contaminated materials, such as splinters or thorns. However, infected animals, and especially cats, also transmit the disease through scratches, bites and direct contact with injured skin. In mammals, the clinical picture is chronic or acute with the appearance of skin lesions. The disease is considered a public health problem, as it affects the population of endemic areas. The present work was designed to analyze the manifestation of the disease in domestic cats, reviewing clinical signs, diagnosis, prevention, treatment and also makes an alert for its importance in public health. Educational measures are needed to make the population aware of the effects of waste on One Health.(AU)


Assuntos
Animais , Esporotricose/diagnóstico , Doenças do Gato/diagnóstico , Micoses/diagnóstico , Gatos/microbiologia
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA