Elbow Ulnar Collateral Ligament Repair With Suture Augmentation Is Biomechanically Equivalent to Reconstruction and Clinically Demonstrates Excellent Outcomes: A Systematic Review.

PURPOSE: To systematically review (1) biomechanical properties of augmented elbow ulnar collateral ligament (UCL) repair compared with reconstruction and (2) clinical efficacy and complication rates of UCL repair with and without augmentation. METHODS: A systematic review was completed August 15, 2023, identifying articles that (1) biomechanically compared suture augmented UCL repair and reconstruction and (2) clinically evaluated medial elbow UCL repairs. Search terms included: "UCL repair" OR "internal brace" OR "suture augmentation" AND "UCL reconstruction." For inclusion, biomechanical studies compared augmented repair with reconstruction; clinical studies required clinical outcomes with minimum 6-month follow-up. Biomechanical data included torsional stiffness, gap formation, peak torque, and failure torque. Clinical data included return to previous level of play, time to return, functional outcomes, and complications. RESULTS: In total, 8 biomechanical and 9 clinical studies were included (5 with and 4 without augmentation). In most biomechanical studies, augmented repairs demonstrated less gap formation, with equivalent torsional stiffness, failure load, and peak torque compared with reconstruction. Clinical outcomes in 104 patients without augmentation demonstrated return to previous level of 50% to 94% for nonprofessional athletes and 29% for professional baseball pitchers. Suture augmented repairs in 554 patients demonstrated return to previous level from 92% to 96%, at 3.8 to 7.4 months, with Kerlan Jobe Orthopaedic Clinic scores of 86 to 95. The overall complication rate for augmented UCL repair was 8.7%; most commonly ulnar neuropraxia (6%). CONCLUSIONS: Biomechanically, UCL repair with augmentation provided less gapping with equivalent torsional stiffness and failure compared with reconstruction. Clinically, augmented UCL repair demonstrated excellent return to previous level of play and Kerlan Jobe Orthopaedic Clinic scores with modest complications and time to return. Augmented UCL repair is biomechanically equivalent to reconstruction and may be a viable alternative to reconstruction in indicated athletes. CLINICAL RELEVANCE: UCL repair with suture augmentation is biomechanically equivalent to reconstruction and clinically demonstrates excellent outcomes.

Elbow Ulnar Collateral Ligament Tears in 2023: Evaluation and Management.

The ulnar collateral ligament, also called the medial collateral ligament of the elbow, is the primary stabilizer against valgus loads. This ligament can be traumatically torn, such as in an elbow dislocation, or can tear through attritional damage with overhead sports. Although baseball pitching is the most common contributor, these injuries also occur with volleyball, gymnastics, and javelin throwing. Patients most commonly report a history of medial elbow pain with associated loss of command, control, and throw velocity. The ulnar nerve lies directly superficial to the posterior band of the ulnar collateral ligament and ulnar neuritis is commonly associated with ulnar collateral ligament pathology. Nonsurgical treatment, including rest from activity, flexor-pronator strengthening, and possible platelet-rich plasma injections, can be considered for partial-thickness tears. Surgical treatment can be considered for patients in whom nonsurgical treatment fails and full-thickness tears. Historically, surgical treatment involved reconstruction of the ligament with a tendon graft. Ipsilateral palmaris longus autograft has been the most commonly used graft, but contralateral palmaris, autograft hamstring tendons, and allograft tendon have also been used. This procedure has a high rate of return to play and a low complication rate, but most athletes require 12 to 18 months to fully return. More recently, repair of the ligament, with the addition of a biologic ingrowth ligament augmentation suture, has demonstrated similarly high rates of return to play and low complication rates, with a full return to play in 6 months.

The influence of a single 30-pitch session on elbow laxity in adolescent and collegiate baseball pitchers.

BACKGROUND: Ulnar collateral ligament (UCL) injuries are a source of significant injury among baseball players, and are increasingly evaluated under ultrasound. The purpose of this study is to determine the effect of a single session of pitching upon UCL thickness and laxity via a cross sectional, controlled ultrasonographic study. We hypothesize that a single session of pitching will cause the ulnar collateral ligament to thicken and become more lax. METHODS: This was a cross sectional comparative study of collegiate and high school pitchers. Pitchers underwent an ultrasonographic assessment of the UCL before and after a thirty-pitch bullpen warm-up. Laxity was measured as the change in the distance between the ulna and the trochlea with and without a 5-pound weight held in hand with the elbow at 30° of flexion. Pre- and post-throwing UCL thickness and medial laxity were statistically compared with paired tests. RESULTS: Our study included 15 pitchers, 8 collegiate and 7 high school level athletes. All played baseball at least 6 days a week, and nearly all played for at least 10 months a year. Pitchers reported a peak velocity of 89 ± 6 (77 to 98) miles per hour. In the prior season, these pitchers pitched 56 ± 33 (10 to 120) games, throwing 62 ± 34 (25-140) pitches per game on average. After throwing, there was significantly less UCL laxity (P = .013). Post-throwing laxity was significantly positively correlated with both peak pitch velocity (P = .009) and an average number of pitches thrown per game (P = .10). CONCLUSION: Throwing 30 pitches significantly decreases medial elbow laxity with stress, possibly due to flexor-pronator activation. Post-throwing medial laxity is correlated with both peak pitch velocity and average number of pitches thrown per game. Future studies should be conducted to determine the number of throws at which laxity begins to increase, as this may provide a workload management guideline for injury prevention.

Job satisfaction and practice characteristics of shoulder and elbow surgeons: a survey of American Shoulder and Elbow Surgeons society members.

BACKGROUND: The purpose of this study is to assess the current trends in fellowship training, career satisfaction, practice characteristics, and surgical case volume among shoulder and elbow surgeons. METHODS: A web-based, anonymous 25-item survey was sent to the membership of the American Shoulder and Elbow Surgeons (ASES) in October of 2022. Questions posed included respondent demographics, fellowship training, career satisfaction, practice characteristics, and surgical case characteristics. Descriptive statistics were performed to report demographic information, assess job and training satisfaction rates, and evaluate practice characteristics. Chi-squared and independent samples t-tests were performed to analyze satisfaction rates, job applications, and surgical case volume with regard to years in practice and practice setting. RESULTS: Twenty percent (243/1248) of ASES members satisfactorily completed the survey. Of the 243 ASES member respondents, 97% (236/243) stated that they would pursue their fellowship training again. Ninety-eight percent (239/243) of respondents were satisfied with their specialty choice. One-hundred percent (242/243) were satisfied with their training in shoulder. Seventy-two percent (176/243) were satisfied with their training in elbow. Seventy-four percent (179/243) were satisfied with their job availability and 85% (207/243) were satisfied with their job location. The mean total number of orthopedic surgical cases per year was 393 ± 171. The mean total number of shoulder cases per year was 253 ± 149. The mean total number of elbow cases per year was 41 ± 41. Physicians who have been in practice for 11 years or more were comparatively more satisfied (90% vs. 80%) with their job location (P value = .008) and job availability (81% vs. 64%, P value < .001). Additionally, senior surgeons completed more orthopedic (431 vs. 347, P value < .001) and shoulder (279 vs. 220, P value = .002) cases annually than surgeons earlier in their careers. Satisfaction rates, job applications, and surgical case volume did not associate with practice setting. CONCLUSIONS: The majority of ASES member shoulder and elbow surgeons are satisfied with their training, their case volume and complexity, and their specialty choice. Fewer surgeons are satisfied with their elbow training and overall elbow case volume remains low among shoulder and elbow surgeons. Shoulder and elbow surgeons earlier in their careers perform fewer surgical cases, are less satisfied with their job availability and location, and completed more job applications for their first job after fellowship when compared to more senior surgeons.

The Effect of Lateralization and Distalization After Grammont-Style Reverse Total Shoulder Arthroplasty.

BACKGROUND: The purpose of this study is to evaluate the relationship between multiple radiographic measures of lateralization and distalization and clinical outcome scores after reverse total shoulder arthroplasty (RTSA). METHODS: We retrospectively evaluated all RTSAs performed by the senior author between January 1, 2007, and November 1, 2017. We then evaluated the visual analog scale for pain (VAS pain), Simple Shoulder Test (SST), and American Shoulder and Elbow Surgeons (ASES) scores and complication and reoperation rates at a minimum of 2-year follow-up. We measured preoperative and postoperative (2-week) radiographs for the lateralization shoulder angle (LSA), the distalization shoulder angle (DSA), lateral humeral offset (LHO), and distance from glenoid to lateral aspect of the greater tuberosity (GLAGT). A multivariable analysis was performed evaluating the effect of the postoperative radiographic measurements on final patient reported outcomes (ASES scores, SST, VAS pain). RESULTS: The cohort included 216 shoulders from unique patients who had patient reported outcome scores available at a minimum of 2-year follow-up (average, 4.0±1.9 years) for a total follow-up rate of 70%. In the multivariable models, more lateralization (LSA) was associated with worse final ASES scores -0.52 (95% CI: -0.88 to -0.17; p=0.004), and more distalization (DSA) was associated with better final ASES scores 0.40 (95% CI: 0.11, 0.69; p=0.007). More lateralization (LSA) was associated with worse final SST scores -0.06 (95% CI: -0.11, -0.003; p=0.039). Finally, greater distalization (DSA) was associated with lower final VAS pain scores, Ratio = 0.98 (95% CI: 0.96, 1.00; p=0.021). CONCLUSION: Greater distalization and less lateralization are associated with better function and less pain after Grammont-style RTSA. If utilizing a Grammont-style implant, remaining consistent with Grammont's principles of implant placement will afford better final clinical outcomes.

Biomechanical comparison of suture bridge rotator cuff repair with and without dermal allograft pledgets.

BACKGROUND: One method to augment rotator cuff repair is to pass dermal allograft pledgets along the sutures that bridge from the medial to the lateral row. It remains unclear whether this augmentation method alters repair biomechanics. METHODS: This was a controlled laboratory study. After an a priori power analysis, 9 pairs of rotator cuffs underwent double-row suture bridge rotator cuff repair, half randomized to augmentation with dermal allograft pledgets passed along the suture bridge sutures. Repairs were then mounted on a material testing system and loaded cyclically 500 cycles to measure applied force and displacement. Repairs then underwent ultimate failure testing, and stiffness, ultimate failure force, and ultimate failure displacement were measured. Paired t tests were performed to compare between groups. RESULTS: There were no differences between groups in construct gapping with cyclic loading after 500 cycles (P = .885). There were no differences between the augmented and control groups in yield force (103.5 ± 5.0 vs. 101.4 ± 5.9 N, respectively, P = .183), stiffness (94.2 ± 13.9 vs. 90.9 ± 13.8, P = .585), or ultimate failure force (255.3 ± 65.8 vs. 285.3 ± 83.2, P = .315). There were no differences between groups in failure modes, with most specimens failing by cuff tissue tearing within or medial to the construct. CONCLUSION: The addition of dermal allograft pledgets does not positively or negatively influence the time-zero biomechanical characteristics of double-row suture bridge rotator cuff repair.

Postoperative Revision, Complication and Economic Outcomes of Patients with Reverse or Anatomic Total Shoulder Arthroplasty at One Year: A Retrospective, United States Hospital Billing Database Analysis.

BACKGROUND: Data on the one-year postoperative revision, complication, and economic outcomes in a hospital setting after total shoulder arthroplasty (TSA) are sparse. METHODS: A retrospective cohort study using the Premier Healthcare Database, a hospital-billing data source, evaluated one-year postoperative revision, complication, and economic outcomes of reverse (RTSA) and anatomic (ATSA) TSA for patients who underwent the procedure from 2015 until 2021. All-cause revisits, including revision-related events (categorized as either irrigation and débridement or revision procedures and device removals) and shoulder/non-shoulder complications were collected. The incidences and costs of these revisits were evaluated. Generalized linear models were used to evaluate the associations between patient characteristics and revision and complication occurrences and costs. RESULTS: Among 51,478 RTSA and 34,623 ATSA patients (mean [standard deviation (SD)] ages RTSA 71.5 [8.1] years, ATSA 66.8 [9.0] years), one-year adjusted incidences of all-cause revisits, irrigation/débridement, revision procedures/device removals, and shoulder/non-shoulder complications were RTSA: 45.0% (95% confidence interval (CI): 44.6%-45.5%), 0.1% (95% CI: 0.1%-0.2%), 2.1% (95% CI: 2.0%-2.2%), and 17.8% (95% CI: 17.5%-18.1%) and ATSA: 42.3% (95% CI: 41.8%-42.9%), 0.2% (95% CI: 0.1%-0.2%), 1.9% (95% CI: 1.8%-2.1%), and 14.4% (95% CI: 14.0%-14.8%), respectively; shoulder-related complications were RTSA: 12.4% (95% CI: 12.1%-12.7%) and ATSA: 9.9% (95% CI: 9.6%-10.3%). Significant factors associated with a high risk of revisions and complications included, but were not limited to, chronic comorbidities and noncommercial insurance. Per patient, the mean (SD) total one-year hospital cost was $25,225 ($15,911) and $21,520 ($13,531) for RTSA and ATSA, respectively. Revision procedures and device removals were most costly, averaging $22,920 ($18,652) and $26,911 ($18,619) per procedure for RTSA and ATSA, respectively. Patients with revision-related events with infections had higher total hospital costs than patients without this event (RTSA: $60,887 (95% CI: $56,951-$64,823) and ATSA: $59,478 (95% CI: $52,312-$66,644)), equating to a mean difference of $36,148 with RTSA and $38,426 with ATSA. Significant factors associated with higher costs of revision-related events and complications included age, race, chronic comorbidities, and noncommercial insurance. CONCLUSIONS: Nearly 45% RTSA and 42% ATSA patients returned to the hospital, most often for shoulder/non-shoulder complications (overall 17.8% RTSA and 14.4% ATSA, and shoulder-related 12.4% RTSA and 9.9% ATSA). Revisions and device removals were most expensive ($22,920 RTSA and $26,911 ATSA). Infection complications requiring revision had the highest one-year hospital costs (∼$60,000). This study highlights the need for technologies and surgical techniques that may help reduce TSA healthcare utilization and economic burden.

Comparison of 3D Computer Assisted Planning With and Without Patient Specific Instrumentation for Severe Bone Defects in Reverse Total Shoulder Arthroplasty.

BACKGROUND: Preoperative planning is an integral aspect of managing complex deformity in reverse shoulder arthroplasty (RSA). The purpose of this study was to compare the success of patient specific instrumentation (PSI) and 3D computer-assisted planning with standard instrumentation (Non-PSI) in achieving planned corrections of the glenoid among patients undergoing RSA with severe bony deformity requiring glenoid bone grafts. METHODS: A retrospective case-control study was performed, including all patients that underwent RSA with combined bone grafting procedures (BIO-RSA or structural bone grafting) for severe glenoid deformity by a single between June 2016 and July 2023. Patients were required to have preoperative and postoperative CT scans as well as preoperative 3D planning performed for inclusion. Patients were divided into two groups based on the use of 3D computer-assisted planning with or without PSI (PSI vs. Non-PSI). The corrected inclination and version were measured by two separate reviewers on preoperative and postoperative 2D CT scans and compared to their corresponding preoperative planning goals utilizing bivariate analyses. RESULTS: We identified 45 patients that met our inclusion criteria (22 PSI and 23 Non-PSI). Preoperative inclination (mean ± SD) (PSI 10.12° ± 15.86°, Non-PSI 9.43° ± 10.64°; P = 0.864) and version (PSI -18.78° ± 18.3°, Non-PSI -17.82° ± 11.49°; P = 0.835) measurements were similar between groups. No significant differences in the mean deviation (error) between the postoperative and planned inclination (PSI 5.49° ± 3.72; Non-PSI 6.91° ± 5.05; P = 0.437) and version (PSI 8.37° ± 5.7; Non-PSI 5.37° ± 4.43; P = 0.054) were found between groups. No difference in the rate of outliers (>10° error) was noted in inclination (P = 0.135) or version (P = 0.445) between groups. Greater planned version correction was correlated with greater error when PSI was utilized (PSI r = 0.519, P = 0.013; Non-PSI r = 0.362, P = 0.089). CONCLUSION: Both PSI and 3D computer-assisted planning without PSI (Non-PSI) appear to be useful techniques to achieve version and inclination correction among patients undergoing RSA with severe glenoid deformity required glenoid bone grafting with no clear superiority of one method over the other. Surgeons should be aware that when utilizing PSI, slightly greater error in achieving version goals may occur as version correction is increased.

A Transitional Pain Management Program Is Associated with Reduced Opioid Dependence after Major Shoulder Surgery.

BACKGROUND: Over-prescription of opioids in the United States increases risks of opioid dependence, overdose, and death. Increased perioperative and postoperative opioid use during orthopedic shoulder surgery is a significant risk factor for long term opioid dependence. The authors hypothesized that a multidisciplinary perioperative pain management program (Transitional Pain Service or TPS) for major shoulder surgery would lead to a reduced amount of opioids required postoperatively. METHODS: A TPS was implemented at a Veterans Affairs Medical Center focused on non-opioid pain management and cessation support. Opioid consumption during the implementation of the TPS was compared to a historical cohort. All patients undergoing shoulder arthroplasty or rotator cuff repair were included. The primary outcome was the proportion of patients continuing opioid use at 90 days postoperatively. Secondary outcomes included postoperative pain scores, time to opioid cessation, and median opioid tablets consumed at 90-days. A multivariable model was developed to predict total opioid use at 90-days postoperatively. Kaplan Meier curves were calculated for time to opioid cessation. RESULTS: The TPS group demonstrated decreased persistent opioid use at 90 days post-discharge (12.6% vs. 28.6%; p=0.018). Independent predictors associated with increased total opioid tablet prescriptions at 90 days included length of stay (ß=19.17), anxiety diagnosis (ß=37.627), and number of tablets prescribed at discharge (ß=1.353). Shoulder arthroplasty surgery (TSA) was associated with decreased 90-day opioid utilization (ß= -32.535) when compared to cuff repair (RCR). Median time to cessation was shorter in TSA (6 days) when compared with RCR (8 days). Pain scores were reduced compared to population mean by post-discharge day 2 for TSA and by post-discharge day 7 for RCR. Median number of post-discharge opioid tablets (oxycodone 5 mg) consumed under TPS management was 25 in both RCR and TSA surgery groups (180 MME). DISCUSSION AND CONCLUSIONS: This study demonstrates that a TPS reduces the amount of opioid use of patients undergoing shoulder arthroplasty or cuff repair at 90 days when compared with a historical control. Multivariable regression indicated that fewer opioid tablets at discharge was a modifiable factor that may aid in reducing opioid consumption and that anxiety diagnosis, increased length of stay, and cuff repair surgery were other factors independently associated with increased opioid consumption. This data will assist surgeons in counseling patients, setting narcotic use expectations, and minimizing overprescribing. Use of a similar multidisciplinary perioperative pain management program may greatly reduce opioid over prescriptions nationally.

Utility of Superior Augments in Reverse Shoulder Arthroplasty (Exactech, Equinoxe GPS) without Significant Glenoid Deformity.

INTRODUCTION: Superior augment use may help avoid superior tilt while minimizing removal of inferior glenoid bone. Therefore, our goal is to compare superior augments versus no augment baseplates in RSA for patients with rotator cuff dysfunction and no significant superior glenoid erosion. METHODS: A multicenter retrospective analysis of 145 patients who underwent RSA with intraoperative navigation (Exactech, Equinoxe GPS) and three-year follow-up (mean 32-month follow-up, range 20 to 61 months) who had preoperative superior inclination less than 10 degrees and retroversion less than 15 degrees. Patient demographics, radiographic measurements, surgical characteristics, patient-reported outcomes at preoperative and postoperative visit closest to three years, and adverse events at final follow-up were obtained. Operative time, planned inclination, and planned version of the baseplate were obtained. Chi-square test used to compare categorical variables and student t-test used to compare augment and no augment cohorts. RESULTS: The study population consisted of 54 superior augment patients and 91 no augment patients. The augment cohort had lower BMI (27.2 vs. 29.4, p-0.023), higher native superior inclination (5.9 vs. 1.4 degrees, p<0.001). No difference between the augment and no augment cohorts was found regarding age (p=0.643), gender (p=0.314), medical comorbidities (p>0.05), surgical indication (p=0.082), and native glenoid version (p=0.564). The augment cohort had higher internal rotation score (4.6 vs. 3.9, p=0.023), all remaining ROM and PROs preoperatively were not significantly different. At final follow-up, active ROM in all planes was not different between the cohorts. Regarding PROs, the postoperative SAS score was significantly higher (78.0 vs. 73.6, p=0.042), and ASES score trended towards higher (83.6 vs. 77.5, p=0.063) in the augment cohort. The augment cohort had significantly lower proportion of patients planned to have superior baseplate tilt (1.9% vs. 14.3%, p=0.012), and had greater mean inclination correction (6.3 vs. 1.3 degrees, p<0.001), compared to no augment cohort. Adverse events were rare, and there was no significant difference found between the augment and no augment cohorts (5.6% vs. 3.3%, p=0.509). DISCUSSION: Superior augmented baseplate in RSA with minimal superior glenoid erosion is associated with similar ROM and adverse events with somewhat improved postoperative PROs compared to non-augmented baseplates at 3-year follow-up. Additionally, superior augments resulted in a greater proportion of baseplates planned to avoid superior tilt, and trended toward shorter operative times. Further investigation of long-term glenoid baseplate loosening is imperative to fully understand the cost-effectiveness of superior augments in the setting of minimal glenoid deformity.

Editorial Commentary: Rotator Cuff Repair in Patients With Diabetes: Stricter Glycemic Control for the First 6 Months Is Associated With Better Healing.

Retear rates after arthroscopic rotator cuff repair continue to be unacceptably high. Of the known risk factors for failure of rotator cuff repair, many are nonmodifiable. Poor glycemic control in patients with diabetes in the first 3 to 6 months after arthroscopic rotator cuff repair is associated with a lower healing rate. This represents a modifiable risk factor that we should routinely address in patients postoperative rotator cuff repair.

Reliability of ulnar collateral ligament findings in magnetic resonance imaging.

BACKGROUND: Ulnar collateral ligament (UCL) tears are common in baseball players. Although magnetic resonance imaging (MRI) is the most used imaging modality for UCL injuries, the inter-rater reliability of MRI analyzing specific characteristics of UCL pathology has not been defined. The purpose of this study was to define the inter-rater reliability of MRI for evaluating UCL characteristics. METHODS: Three surgeons analyzed 45 noncontrast MRIs: 15 without UCL tears, 15 with intraoperatively confirmed partial-thickness tears, and 15 with intraoperatively confirmed full-thickness tears. Findings evaluated included ligament characteristics (periligamentous or osseous edema, ligament hypertrophy, calcifications, and partial- or full-thickness tearing) and location of the pathology (proximal, midsubstance, or distal). Fleiss' κ coefficients were used to assess interobserver reliability. RESULTS: There were high rates of agreement for midsubstance (κ: 0.50) and distal (κ: 0.69) ligament edema and proximal osseous edema (κ: 0.48). There were low rates of agreement for proximal ligament edema (κ: 0.08), ligament thickening (κ: -0.02 to 0.20), and proximal to midsubstance calcifications (κ: -0.04 to 0.10). Midsubstance (κ: 0.55) and distal full-thickness tears (κ: 0.63) demonstrated higher agreement than proximal (κ: 0.29). Proximal partial-thickness tears (κ: 0.45) had higher agreement than midsubstance (κ: -0.02) or distal (κ: -0.02). CONCLUSIONS: In our study, there was high inter-rater reliability regarding proximal osseous edema, midsubstance, and distal ligament edema and full-thickness tears. There was no agreement for midsubstance and distal partial-thickness UCL tears, but fair agreement for proximal tears. UCL tissue characteristics including ligament thickening and calcifications demonstrated low agreement. Challenges remain in effectively evaluating UCL tissue characteristics on noncontrast MRIs.

High and low performers in internal rotation after reverse total shoulder arthroplasty: a biplane fluoroscopic study.

BACKGROUND: Internal rotation in adduction is often limited after reverse total shoulder arthroplasty (rTSA), but the origins of this functional deficit are unclear. Few studies have directly compared individuals who can and cannot perform internal rotation in adduction. Little data on underlying 3D humerothoracic, scapulothoracic, and glenohumeral joint relationships in these patients are available. METHODS: Individuals >1-year postoperative to rTSA were imaged with biplane fluoroscopy in resting neutral and internal rotation in adduction poses. Subjects could either perform internal rotation in adduction with their hand at T12 or higher (high, N = 7), or below the hip pocket (low, N = 8). Demographics, the American Shoulder and Elbow Surgeons score, Simple Shoulder Test, and scapular notching grade were recorded. Joint orientation angles were derived from model-based markerless tracking of the scapula and humerus relative to the torso. The 3D implant models were aligned to preoperative computed tomography models to evaluate bone-implant impingement. RESULTS: The Simple Shoulder Test was highest in the high group (11 ± 1 vs. 9 ± 2, P = .019). Two subjects per group had scapular notching (grades 1 and 2), and 3 high group and 4 low group subjects had impingement below the glenoid. In the neutral pose, the scapula had 7° more upward rotation in the high group (P = .100), and the low group demonstrated 9° more posterior tilt (P = .017) and 14° more glenohumeral elevation (P = .047). In the internal rotation pose, axial rotation was >45° higher in the high group (P ≤ .008) and the low group again had 11° more glenohumeral elevation (P = .058). Large rotational differences within subject groups arose from a combination of differences in the resting neutral and maximum internal rotation in adduction poses, not only the terminal arm position. CONCLUSIONS: Individuals who were able to perform high internal rotation in adduction after rTSA demonstrated differences in joint orientation and anatomic biases versus patients with low internal rotation. The high rotation group had 7° more resting scapular upward rotation and used a 15°-30° change in scapular tilt to perform internal rotation in adduction versus patients in the low group. The combination of altered resting scapular posture and restricted scapulothoracic range of motion could prohibit glenohumeral rotation required to reach internal rotation in adduction. In addition, inter-patient variation in humeral torsion may contribute substantially to postoperative internal rotation differences. These data point toward modifiable implant design and placement factors, as well as foci for physical therapy to strengthen and mobilize the scapula and glenohumeral joint in response to rTSA surgery.

Inlay vs. onlay humeral components in reverse total shoulder arthroplasty: a biorobotic shoulder simulator study.

BACKGROUND: Both inlay and onlay humeral implants are available for reverse total shoulder arthroplasty (rTSA), but biomechanical data comparing these components remain limited. This study investigated the effects of inlay and onlay rTSA humeral components on shoulder biomechanics using a biorobotic shoulder simulator. METHODS: Twenty fresh-frozen cadaveric shoulders were tested before and after rTSA with either an inlay or onlay humeral implant. Comparisons were performed between the most commonly implanted configurations for each implant (baseline) and with a modification to provide equivalent neck-shaft angles (NSAs) for the inlay and onlay configurations. Specimens underwent passive range-of-motion (ROM) assessment with the scapula held static, and scapular-plane abduction was performed, driven by previously collected human-subject scapulothoracic and glenohumeral kinematics. Passive ROM glenohumeral joint angles were compared using t tests, whereas muscle force and excursion data during scapular-plane elevation were evaluated with statistical parametric mapping and t tests. RESULTS: Maximum passive elevation was reduced for the inlay vs. onlay humeral components, although both implants caused reduced passive elevation vs. the native joint. Inlay rTSA also demonstrated reduced passive internal rotation at rest and increased external rotation at 90° of humerothoracic elevation vs. the native joint. All preoperative planning estimates of ROM differed from experiments. Rotator cuff forces were elevated with an onlay vs. inlay humeral implant, but simulated muscle excursions did not differ between systems. Compared with the native joint, rotator cuff forces were increased for both inlay and onlay implants and deltoid forces were reduced for inlay implants. Muscle excursions were dramatically altered by rTSA vs. the native joint. Comparisons of inlay and onlay humeral implants with equivalent NSAs were consistent with the baseline comparisons. CONCLUSIONS: Rotator cuff forces required to perform scapular-plane abduction increase following rTSA using both inlay and onlay implants. Rotator cuff forces are lower with inlay implants compared with onlay implants, although inlay implants also result in reduced passive-elevation ROM. Deltoid forces are lower with inlay implants in comparison to the native joint but not with onlay implants. The differences between inlay and onlay components are largely unaffected by NSA, indicating that these differences are inherent to the inlay and onlay designs. In those patients with an intact rotator cuff, decreased rotator cuff forces to perform abduction with an inlay humeral implant compared with an onlay implant may promote improved long-term outcomes owing to reduced deltoid muscle fatigue when using an inlay implant.

Arthroscopic scapulothoracic bursectomy with and without superomedial angle scapuloplasty: a comparison of patient-reported outcomes.

BACKGROUND: Operative treatment of scapulothoracic bursitis most commonly comprises arthroscopic scapulothoracic bursectomy with or without partial superomedial angle scapuloplasty. There is currently no consensus regarding whether or when scapuloplasty should be performed. Prior studies are limited to small case series, and optimal surgical indications are not yet established. The purposes of this study were (1) to retrospectively review patient-reported outcomes of arthroscopic treatment of scapulothoracic bursitis and (2) to compare outcomes between scapulothoracic bursectomy alone and bursectomy with scapuloplasty. We hypothesized that bursectomy with scapuloplasty would provide superior pain relief and functional improvement. MATERIALS AND METHODS: All cases of scapulothoracic débridement with or without scapuloplasty completed at a single academic center from 2007 through August 2020 were reviewed. Patient demographic characteristics, symptomatology data, physical examination findings, and corticosteroid injection response data were collected from the electronic medical record. Visual analog scale pain, American Shoulder and Elbow Surgeons, Simple Shoulder Test, and Single Assessment Numeric Evaluation scores were collected. Comparisons between the group undergoing bursectomy alone and the group undergoing bursectomy with scapuloplasty were made using the Student t test for continuous variables and the Fisher exact test for categorical variables. RESULTS: Thirty patients underwent scapulothoracic bursectomy alone, and 38 patients underwent bursectomy with scapuloplasty. Final follow-up data were available for 56 of 68 cases (82%). Final postoperative visual analog scale pain scores (3.4 ± 2.2 and 2.8 ± 2.2, respectively; P = .351), American Shoulder and Elbow Surgeons scores (75.8 ± 17.7 and 76.5 ± 22.5, respectively; P = .895), and Simple Shoulder Test scores (8.8 ± 2.3 and 9.5 ± 2.8, respectively; P = .340) were similar between the bursectomy-alone and bursectomy-with-scapuloplasty groups. CONCLUSION: Both arthroscopic scapulothoracic bursectomy alone and bursectomy with scapuloplasty are effective treatments for scapulothoracic bursitis. Operative time is shorter without scapuloplasty. In this retrospective series, these procedures showed similar outcomes regarding shoulder function, pain, surgical complications, and rates of subsequent shoulder surgery. Further studies with a focus on 3-dimensional scapular morphology may help optimize patient selection for each of these procedures.

A stabilizing role of the glenoid labrum: the suction cup effect.

BACKGROUND: The glenoid labrum acts as a bumper, deepening glenoid concavity and amplifying the concavity-compression mechanism, and serves as the scapular attachment for glenohumeral ligaments. The role of the posterosuperior labrum in anteroinferior glenohumeral stability, and the role of the anterior labrum in posterior stability has been debated. The purpose of this study was to quantify the contribution of anteroinferior and posterosuperior labral tears to loss of glenohumeral stability in multiple directions. METHODS: Fourteen fresh-frozen cadaveric shoulders were tested on a custom stability ratio measurement apparatus. The peak force that was required to translate the humeral head in anterior, anteroinferior, posterior, and posteroinferior directions was measured under 5 conditions: intact labrum (n = 14), anteroinferior labral tear (n = 7), posterosuperior labral tear (n = 7), combined labral tear (n = 14), and no labrum (n = 14). The stability ratio was defined as the peak translational force divided by the compressive force. Within force-translation curves, we defined the suction cup effect as the force required to release the negative pressure created by an intact labrum. RESULTS: The suction cup effect was usually present with the intact labrum and always disappeared after removal of the labrum for anterior (100% vs. 0%) and posterior (86% vs. 0%) translations (P < .001). After creation of an anteroinferior labral tear, the stability ratio for posterior direction decreased (P < .001) and the suction cup effect disappeared (P < .001). After creation of a posterosuperior labral tear, stability ratios in the anterior and anteroinferior directions decreased (P ≤ .006) and the suction cup effect disappeared (P ≤ .015). The stability ratio for anterior and anteroinferior testing was more diminished by posterosuperior labral tears than anteroinferior labral tears, and the stability ratio for posterior testing was more diminished by anteroinferior labral tears than posterosuperior labral tears. CONCLUSION: Anteroinferior labral tears decreased posterior stability and posterosuperior labral tears decreased anterior and anteroinferior stability, largely because of loss of the suction cup effect.

What are the indications for medial ulnar collateral ligament surgery in baseball players? An MRI case-based study.

BACKGROUND: Ulnar collateral ligament (UCL) tears are common in baseball players. When nonoperative management fails; reconstruction or repair may be necessary to restore physical function. There is no clear consensus regarding the indications for surgery based on magnetic resonance imaging (MRI) tear characteristics or the indications for selecting repair over reconstruction. The purpose of this study was to define the indications for UCL surgery based on MRI and to elucidate indications for UCL repair vs. reconstruction. METHODS: Twenty-six orthopedic surgeons who treat baseball players were surveyed. Forty-five MRIs were reviewed: 15 without UCL tears, 15 with intraoperatively confirmed partial-thickness tears, and 15 with full-thickness tears. Factors investigated included ligament characteristics (periligamentous or osseous edema, ligament hypertrophy, calcification, partial or full-thickness tearing) and location (proximal, midsubstance, or distal). Surgeons were given a clinical scenario and asked whether 1) surgery was indicated and 2) whether repair or reconstruction was recommended. Odds ratios (OR) and 95% confidence intervals (95% CI) helped identify significant predictors for both queries. RESULTS: The odds of recommending surgical treatment compared to nonoperative treatment were 2.4× more likely for a proximal partial-thickness tear, 3.2× for distal partial-thickness tear, 5.1× for distal full-thickness tear, and 7.0× for proximal full-thickness tear (P < .001). Significant indications for repair included distal partial (OR = 1.6, 95% CI 1.0, 2.1, P < .001) and full-thickness tears (OR = 1.7, 95% CI 1.1, 2.3, P < .001). Repair was 3× less likely recommended for midsubstance full-thickness tears (OR = 3.0, 95% CI -5.0, -1.0, P = .004). Ultrasound stress testing was requested in 78% of partial tears. CONCLUSIONS: Among surgeons surveyed, the highest odds for recommending operative treatment were proximal full-thickness tears, then distal full-thickness, distal partial-thickness, and proximal partial-thickness tears. Repair was most appropriate for partial and full-thickness distal tears, but relatively contraindicated for complete midsubstance UCL tears. Ultrasound stress testing was frequently requested for partial tears. Given the lack of consensus among surgeons, future prospective registries are necessary to determine whether these factors associate with clinical outcomes.

Rotator cuff muscle imbalance associates with shoulder instability direction.

BACKGROUND: Although muscle weakness and/or imbalance of the rotator cuff are thought to contribute to the development of shoulder instability, the association between muscular dysfunction and shoulder instability is not completely understood. The purpose of this study was to evaluate rotator cuff and deltoid muscle cross-sectional areas in different types of shoulder instability (anterior, posterior, and multidirectional instability [MDI]) and to determine the associations between muscular imbalance and shoulder instability direction. METHODS: Preoperative magnetic resonance images of patients with shoulder instability who subsequently underwent arthroscopic glenohumeral labral repair or capsular plication were evaluated. Shoulder instability was classified into 3 categories by direction: (1) anterior, (2) posterior, and (3) MDI. The rotator cuff (supraspinatus, subscapularis, and infraspinatus + teres minor) and deltoid (anterior and posterior portions, and total) muscle areas were measured on T1 sagittal and axial slices, respectively. The ratios of the subscapularis to infraspinatus + teres minor area and the anterior deltoid to posterior deltoid area were calculated to quantify the transverse force couple imbalance. RESULTS: A total of 189 patients were included, where each group consisted of 63 patients. The infraspinatus + teres minor muscle area was smaller than the subscapularis muscle area in the anterior instability group (P = .007). The subscapularis muscle area was smaller than the infraspinatus + teres minor muscle area in the posterior instability and MDI groups (P ≤ .003). The anterior deltoid muscle area was smaller than the posterior deltoid muscle area in all groups (P ≤ .001). The subscapularis-to-infraspinatus + teres minor area ratio in the anterior instability group (1.18 ± 0.40) was higher than that in the posterior instability and MDI groups (0.79 ± 0.31 and 0.93 ± 0.33, respectively; P < .001). There was no difference in the anterior deltoid-to-posterior deltoid area ratio among the 3 groups. CONCLUSION: Patients with anterior instability have smaller muscle area of the posterior rotator cuff as compared with the anterior rotator cuff. In contrast, patients with posterior instability and MDI have smaller muscle area of the anterior rotator cuff as compared with the posterior rotator cuff. Thus, the direction of shoulder instability is associated with rotator cuff muscle area.

Active physical therapy does not improve outcomes after reverse total shoulder arthroplasty: a multi-center, randomized clinical trial.

OBJECTIVE: To compare range of motion (ROM) and patient-reported outcomes (PROs) between a structured home exercise program (HEP) and active, supervised physiotherapy (PT) after primary Reverse total shoulder arthroplasty (RTSA) by performing a multicenter randomized clinical trial. METHODS: Patients undergoing primary RTSA at 2 centers were randomized to either a HEP group, in which they were given a handout and a rope pulley, or a PT group, in which they were given a standardized prescription. Surgical technique and implants were standardized. At baseline, 6 weeks, 3 months, and 1 year postoperatively, we obtained American Shoulder and Elbow Surgeons scores, Western Ontario Osteoarthritis Scores, visual analogue scale for pain scores, and measured ROM via videotape. On video, ROM was then measured by blinded observers. At all study visits, patients were asked how many days per week they were in PT and how many days a week they completed HEP to determine compliance and crossover. An a priori power analysis suggested 29 patients per group, 56 patients total to detect a difference of 30° in active forward elevation with a power of 0.8 at a 2-sided alpha of 0.05. RESULTS: 89 patients were randomized, 43 to PT, and 46 to HEP. We obtained 1-year PRO follow-up on 83 patients (93%) and ROM follow-up on 73 patients (82%). Nine patients (20%) crossed over from HEP to PT and 2 patients (4%) crossed over from PT to HEP. Complications occurred in 13% of HEP and 17% of PT patients (P = .629). Using mixed models that account for baseline values, there were no significant differences between groups in PROs or ROM at final follow-up. CONCLUSION: In this 2-center, randomized clinical trial, there were no significant differences in patient outcomes or ROM between HEP and PT after RTSA. These findings suggest that it may not be necessary to recommend PT as a protocol for all patients after RTSA.

Reverse Total Shoulder Arthroplasty Alters Humerothoracic, Scapulothoracic, and Glenohumeral Motion During Weighted Scaption.

BACKGROUND: Reverse total shoulder arthroplasty (rTSA) typically restores active arm elevation. Prior studies in patients with rTSA during tasks that load the arm had limitations that obscured underlying three-dimensional (3D) kinematic changes and the origins of motion restrictions. Understanding the scapulothoracic and glenohumeral contributions to loaded arm elevation will uncover where functional deficits arise and inform strategies to improve rTSA outcomes. QUESTIONS/PURPOSES: In a cohort of patients who had undergone rTSA and a control cohort, we asked: (1) Is there a difference in maximum humerothoracic elevation when scapular plane elevation (scaption) is performed with and without a handheld weight? (2) Is maximum humerothoracic elevation related to factors like demographics, patient-reported outcome scores, isometric strength, and scapular notching (in the rTSA group only)? (3) Are there differences in underlying 3D scapulothoracic and glenohumeral motion during scaption with and without a handheld weight? METHODS: Ten participants who underwent rTSA (six males, four females; age 73 ± 8 years) were recruited at follow-up visits if they were more than 1 year postoperative (24 ± 11 months), had a BMI less than 35 kg/m 2 (29 ± 4 kg/m 2 ), had a preoperative CT scan, and could perform pain-free scaption. Data from 10 participants with a nonpathologic shoulder, collected previously (five males, five females; age 58 ± 7 years; BMI 26 ± 3 kg/m 2 ), were a control group with the same high-resolution quantitative metrics available for comparison. Participants in both groups performed scaption with and without a 2.2-kg handheld weight while being imaged with biplane fluoroscopy. Maximum humerothoracic elevation and 3D scapulothoracic and glenohumeral kinematics across their achievable ROM were collected via dynamic imaging. In the same session the American Shoulder and Elbow Surgeons (ASES) score, the Simple Shoulder Test (SST), and isometric strength were collected. Data were compared between weighted and unweighted scaption using paired t-tests and linear mixed-effects models. RESULTS: When compared with unweighted scaption, maximum humerothoracic elevation decreased during weighted scaption for patients who underwent rTSA (-25° ± 30°; p = 0.03) but not for the control group (-2° ± 5°; p = 0.35). In the rTSA group, maximum elevation correlated with the ASES score (r = 0.72; p = 0.02), and weighted scaption correlated with BMI (r = 0.72; p = 0.02) and the SST (r = 0.76; p = 0.01). Scapular notching was observed in three patients after rTSA (Grades 1 and 2). Four of 10 patients who underwent rTSA performed weighted scaption to less than 90° humerothoracic elevation using almost exclusively scapulothoracic motion, with little glenohumeral contribution. This manifested as changes in the estimated coefficient representing mean differences in slopes in the humerothoracic plane of elevation (-12° ± 2°; p < 0.001) and true axial rotation (-16° ± 2°; p < 0.001), scapulothoracic upward rotation (7° ± 1°; p < 0.001), and glenohumeral elevation (-12° ± 1°; p < 0.001), plane of elevation (-8° ± 3°; p = 0.002), and true axial rotation (-11° ± 2°; p < 0.001). The control group demonstrated small differences between scaption activities (< |2°|), but a 10° increase in humerothoracic and glenohumeral axial rotation (both p < 0.001). CONCLUSION: After rTSA surgery, maximum humerothoracic elevation decreased during weighted scaption by up to 88° compared with unweighted scaption, whereas 4 of 10 patients could not achieve more than 90° of elevation. These patients exhibited appreciable changes in nearly all scapulothoracic and glenohumeral degrees of freedom, most notably a near absence of glenohumeral elevation during weighted scaption. Patients with rTSA have unique strategies to elevate their arms, often with decreased glenohumeral motion and resultant compensation in scapulothoracic motion. In contrast, the control group showed few differences when lifting a handheld weight. CLINICAL RELEVANCE: Functional deficiency in activities that load the shoulder after rTSA surgery can affect patient independence, and they may be prevalent but not captured in clinical studies. Pre- or postoperative rehabilitation to strengthen scapular stabilizers and the deltoid should be evaluated against postoperative shoulder function. Further study is required to determine the etiology of deficient glenohumeral motion after rTSA, and the most effective surgical and/or rehabilitative strategies to restore deficient glenohumeral motion after rTSA.