RESUMO
The study of environmental pathways and human exposure to Manganese (Mn) in Southern Brazil was performed using two steps. The first step consisted of taking water samples from the surface of the Pardinho River. The average results from this technique showed a significant increase of pollutants, including increased levels of Mn, above the environmentally acceptable standard recommended by the Brazilian National Environment Council. Additionally, 64 soil samples were taken from areas with and without agricultural activity. Many results were above the mean crust and did not indicate significant differences of Mn levels between the sampled areas. For the second step, 12 families were selected and assessed for exposure to Mn in a region with high levels of Mn in the soil. Most of the analyzed foods contained amounts of Mn above the reference values, indicating that food can be an important source of exposure. The Mn content from the hair of most subjects studied was also high compared to reference values from non-exposed populations. Although the contamination appeared to come from a natural origin, the results found in the present study showed that the Mn levels present in the Pardinho River Basin are a relevant public health issue.
Assuntos
Exposição Ambiental/análise , Poluentes Ambientais/análise , Manganês/análise , Adolescente , Adulto , Idoso , Brasil , Criança , Pré-Escolar , Produtos Agrícolas/química , Feminino , Cabelo/química , Humanos , Lactente , Masculino , Pessoa de Meia-Idade , Rios/química , Solo/química , Adulto JovemRESUMO
Analysis of digital images by smartphone was used for copper quantification in sugarcane spirit (cachaça) samples through the formation of blue complex between copper and cuprizone. An experimental design was carried out to evaluate the best complexation reaction conditions. Moreover, different image acquisition procedures (external camera coupled to a smartphone or the smartphone camera) with different regions of interest sizes, distances in image acquisition, and concentration ranges of the calibration curve and the influence of processing the curve in univariate and multivariate modes, by PLS, were evaluated. The results obtained in three real samples and two spikes were compared with those of UV-Vis spectrophotometry, used as a reference method, and they show the potential of the proposed method for the accurate determination of copper. When compared to traditional techniques, the proposed method has the advantages of portability and low cost in addition to requiring a smaller amount of reagents.
Assuntos
Cobre , Saccharum , Grão Comestível , Projetos de Pesquisa , SmartphoneRESUMO
This work proposes a simple device for thermometric titration using a contactless sensor. A low-cost infrared sensor (around $5) was adapted in a disposable, polystyrene vessel for monitoring the temperature to determine the endpoint of neutralization, redox, and complexation titrations, using a homemade syringe pump to titration control. Open-source software was developed to control the device using the Raspberry Pi platform and to perform automatic endpoint determination. The influence of sample volume, the flow rate of titrant, and sensor distance from the solution were evaluated to lower the variation among measurements. The parameters chosen in this regard were 10 mL of sample, 0.8 mL min-1 of titrant solution flow rate, and 3 cm of distance from the sensor to the solution. Results for the determination of the acidity of sauces and the ascorbic acid and calcium content of pharmaceutical products were compared with those from official compendia. The performance of the sensor also was compared with an infrared camera. The proposed method agreed with conventional ones to an extent ranging from 93% to 106%. The robust analytical performance and low cost of the system are essential features that could broaden the use of enthalpimetric analysis in several laboratories.
RESUMO
Paper microzone plates and thermal infrared enthalpimetry (TIE) were combined with potato juice as natural reagent extract to perform the determination of hydrogen peroxide in pharmaceutical, bleaching, and toiletry products. A multichannel pipette was used for reagent addition simultaneously in multiple zones of paper devices, and the temperature rise was determined using an infrared camera. In order to provide suitable measurements, some parameters were optimized such as pH, volume of reagents, and stability of the extract. Results for the hydrogen peroxide were compared with those obtained using methods from official compendia (United States Pharmacopeia and ASTM D2180-17), with agreements ranging from 96 to 103%. The green analytical procedure index was used to compare the greenness of the proposed method with official ones, with clear advantages for TIE. Only microliters of samples and natural reagent extracts were required for analysis, and it was found that waste generation could be greatly reduced. After analysis, the paper device could be directly disposed since the final products of the reaction were O2 and water. According to these features, the proposed method could be considered a promising alternative to routine analysis in agreement with green analytical chemistry principles.
RESUMO
An innovative use of thermal infrared enthalpimetry (TIE) is proposed for the determination of alcoholic content of red and white wines. Notwithstanding the presence of ethanol in beverages, absolute ethanol was added directly to wines, and the temperature rise caused by the heat of dilution was monitored using an infrared camera. Analytical signals were obtained in only 10â¯s for four samples simultaneously, and a calibration curve was constructed with hydroalcoholic reference solutions. A linear calibration curve was obtained from 3.0 to 18.0% (v/v) ethanol (R2â¯=â¯0.9987). The results showed agreement ranging from 98.2 to 104.0% with 942.06 and 969.12 methods of AOAC. Organic compounds (e.g., sugar) did not interfere in the determinations. The proposed method provided fast results, with a throughput of 480 samples per hour and negligible energy consumption (0.001â¯kWh). In addition, the consumption of reagents was reduced when compared with conventional method fulfilling green analytical chemistry requirements.
Assuntos
Etanol/análise , Fotografação , Espectrofotometria Infravermelho , Vinho/análise , Calibragem , Etanol/normas , Química Verde , Processamento de Imagem Assistida por Computador , Espectrofotometria Infravermelho/normas , Vinho/normasRESUMO
A simple and fast method is proposed for determining the alcoholic content of distilled beverages by thermal infrared enthalpimetry (TIE), in which purified water is added directly and the temperature rise caused by the heat of dilution is monitored using an infrared camera. A calibration curve was constructed with hydroalcoholic reference solutions to determine the alcoholic content of vodka, whisky, and cachaça. The influence of the total volume of solutions in the reactor, the stirring speed, the dispensing rate, and the ratio between hydroalcoholic samples and water were evaluated to reach an optimum mixture and provide low variation among measurements. Optimized conditions for those respective parameters were 2.4mL, 200rpm, 0.57mLs-1, and 1:1. To evaluate the accuracy, alcoholic content was also determined by a conventional method (AOAC method 942.06, pycnometry), with agreement ranging from 99.4% to 100.9%. No sample preparation (e.g., dilution or distillation) was required with the proposed method, decreasing the time required for analysis by at least one order of magnitude. The proposed method required less energy consumption by a factor of about three thousand in comparison with the conventional method. The proposed TIE method was robust, able to determine the alcoholic content of diverse distilled beverages. Due to these features and the high sample throughput (up to 480 samples per hour), the proposed method could be considered suitable for routine analysis and agrees with the principles of green analytical chemistry.