Manipulating 2D Materials through Strain Engineering.

This review explores the growing interest in 2D layered materials, such as graphene, h-BN, transition metal dichalcogenides (TMDs), and black phosphorus (BP), with a specific focus on recent advances in strain engineering. Both experimental and theoretical results are delved into, highlighting the potential of strain to modulate physical properties, thereby enhancing device performance. Various strain engineering methods are summarized, and the impact of strain on the electrical, optical, magnetic, thermal, and valleytronic properties of 2D materials is thoroughly examined. Finally, the review concludes by addressing potential applications and challenges in utilizing strain engineering for functional devices, offering valuable insights for further research and applications in optoelectronics, thermionics, and spintronics.

Composition and phase engineering of metal chalcogenides and phosphorous chalcogenides.

Two-dimensional (2D) materials with multiphase, multielement crystals such as transition metal chalcogenides (TMCs) (based on V, Cr, Mn, Fe, Cd, Pt and Pd) and transition metal phosphorous chalcogenides (TMPCs) offer a unique platform to explore novel physical phenomena. However, the synthesis of a single-phase/single-composition crystal of these 2D materials via chemical vapour deposition is still challenging. Here we unravel a competitive-chemical-reaction-based growth mechanism to manipulate the nucleation and growth rate. Based on the growth mechanism, 67 types of TMCs and TMPCs with a defined phase, controllable structure and tunable component can be realized. The ferromagnetism and superconductivity in FeXy can be tuned by the y value, such as superconductivity observed in FeX and ferromagnetism in FeS2 monolayers, demonstrating the high quality of as-grown 2D materials. This work paves the way for the multidisciplinary exploration of 2D TMPCs and TMCs with unique properties.

Analytical Impact-Excitation Theory of Er/O/B Codoped Si Light-Emitting Diodes.

Er doped Si light-emitting diodes may find important applications in silicon photonics and optical quantum computing. These diodes exhibit an emission efficiency 2 orders of magnitude higher at reverse bias than forward bias due to impact excitation. However, physics of impact excitation in these devices remains largely unexplored. In this work, we fabricated an Er/O/B codoped Si light-emitting diode which exhibits a strong electroluminescence by the impact excitation of electrons inelastically colliding the Er ions. An analytical impact-excitation theory was established to predict the electroluminescence intensity and internal quantum efficiency which fit well with the experimental data. From the fittings, we find that the excitable Er ions reach a record concentration of 1.8×10^{19} cm^{-3} and up to 45% of them is in an excitation state by impact excitation. This work has important implications for developing efficient classical and quantum light sources based on rare earth elements in semiconductors.

Substrate engineering for wafer-scale two-dimensional material growth: strategies, mechanisms, and perspectives.

The fabrication of wafer-scale two-dimensional (2D) materials is a prerequisite and important step for their industrial applications. Chemical vapor deposition (CVD) is the most promising approach to produce high-quality films in a scalable way. Recent breakthroughs in the epitaxy of wafer-scale single-crystalline graphene, hexagonal boron nitride, and transition-metal dichalcogenides highlight the pivotal roles of substrate engineering by lattice orientation, surface steps, and energy considerations. This review focuses on the existing strategies and underlying mechanisms, and discusses future directions in epitaxial substrate engineering to deliver wafer-scale 2D materials for integrated electronics and photonics.

Gate-Tuning Hybrid Polaritons in Twisted α-MoO3/Graphene Heterostructures.

Modulating anisotropic phonon polaritons (PhPs) can open new avenues in infrared nanophotonics. Promising PhP dispersion engineering through polariton hybridization has been demonstrated by coupling gated graphene to single-layer α-MoO3. However, the mechanism underlying the gate-dependent modulation of hybridization has remained elusive. Here, using IR nanospectroscopic imaging, we demonstrate active modulation of the optical response function, quantified in measurements of gate dependence of wavelength, amplitude, and dissipation rate of the hybrid plasmon-phonon polaritons (HPPPs) in both single-layer and twisted bilayer α-MoO3/graphene heterostructures. Intriguingly, while graphene doping leads to a monotonic increase in HPPP wavelength, amplitude and dissipation rate show transition from an initially anticorrelated decrease to a correlated increase. We attribute this behavior to the intricate interplay of gate-dependent components of the HPPP complex momentum. Our results provide the foundation for active polariton control of integrated α-MoO3 nanophotonics devices.

Ultrasensitive Self-Driven Terahertz Photodetectors Based on Low-Energy Type-II Dirac Fermions and Related Van der Waals Heterojunctions.

The exotic electronic properties of topological semimetals (TSs) have opened new pathways for innovative photonic and optoelectronic devices, especially in the highly pursuit terahertz (THz) band. However, in most cases Dirac fermions lay far above or below the Fermi level, thus hindering their successful exploitation for the low-energy photonics. Here, low-energy type-II Dirac fermions in kitkaite (NiTeSe) for ultrasensitive THz detection through metal-topological semimetal-metal heterostructures are exploited. Furthermore, a heterostructure combining two Dirac materials, namely, graphene and NiTeSe, is implemented for a novel photodetector exhibiting a responsivity as high as 1.22 A W-1 , with a response time of 0.6 µs, a noise-equivalent power of 18 pW Hz-0.5 , with outstanding stability in the ambient conditions. This work brings to fruition of Dirac fermiology in THz technology, enabling self-powered, low-power, room-temperature, and ultrafast THz detection.

Reversible Entropy-Driven Defect Migration and Insulator-Metal Transition Suppression in VO2 Nanostructures for Phase-Change Electronic Switching.

Oxygen defects are among essential issues and required to be manipulated in correlated electronic oxides with insulator-metal transition (IMT). Besides, surface and interface control are necessary but challenging in field-induced electronic switching towards advanced IMT-triggered transistors and optical modulators. Herein, we demonstrated reversible entropy-driven oxygen defect migrations and reversible IMT suppression in vanadium dioxide (VO2 ) phase-change electronic switching. The initial IMT was suppressed with oxygen defects, which is caused by the entropy change during reversed surface oxygen ionosorption on the VO2 nanostructures. This IMT suppression is reversible and reverts when the adsorbed oxygen extracts electrons from the surface and heals defects again. The reversible IMT suppression observed in the VO2 nanobeam with M2 phase is accompanied by large variations in the IMT temperature. We also achieved irreversible and stable IMT by exploiting an Al2 O3 partition layer prepared by atomic layer deposition (ALD) to disrupt the entropy-driven defect migration. We expected that such reversible modulations would be helpful for understanding the origin of surface-driven IMT in correlated vanadium oxides, and constructing functional phase-change electronic and optical devices.

Ultranarrow-band filterless photodetectors based on CH3NH3PbClxBr3-xmixed-halide perovskite single crystals.

Narrow-band photodetectors based on halide perovskite have recently attracted significant attention due to their exceptional narrow-band detection performance and tunable absorption peaks covering a wide optical range. In this work, we report mixed-halide CH3NH3PbClxBr3-xsingle crystal-based photodetectors have been fabricated, where the Cl/Br ratios were varied (3:0, 10:1, 5:1, 1:1, 1:7, 1:14 and 0:3). Vertical and parallel structures devices were fabricated which exhibited ultranarrow spectral responses under bottom illumination, with a full-width at half-maximum less than 16 nm. The observed performance can be ascribed to the unique carrier generation and extraction mechanisms within the single crystal under short and long wavelength of illumination. These findings offer valuable insights into the development of narrow-band photodetectors that do not necessitate the use of filters and hold tremendous potential for a diverse array of applications.

Infrared HOT Photodetectors: Status and Outlook.

At the current stage of long-wavelength infrared (LWIR) detector technology development, the only commercially available detectors that operate at room temperature are thermal detectors. However, the efficiency of thermal detectors is modest: they exhibit a slow response time and are not very useful for multispectral detection. On the other hand, in order to reach better performance (higher detectivity, better response speed, and multispectral response), infrared (IR) photon detectors are used, requiring cryogenic cooling. This is a major obstacle to the wider use of IR technology. For this reason, significant efforts have been taken to increase the operating temperature, such as size, weight and power consumption (SWaP) reductions, resulting in lower IR system costs. Currently, efforts are aimed at developing photon-based infrared detectors, with performance being limited by background radiation noise. These requirements are formalized in the Law 19 standard for P-i-N HgCdTe photodiodes. In addition to typical semiconductor materials such as HgCdTe and type-II AIIIBV superlattices, new generations of materials (two-dimensional (2D) materials and colloidal quantum dots (CQDs)) distinguished by the physical properties required for infrared detection are being considered for future high-operating-temperature (HOT) IR devices. Based on the dark current density, responsivity and detectivity considerations, an attempt is made to determine the development of a next-gen IR photodetector in the near future.

Emerging Single-Photon Detectors Based on Low-Dimensional Materials.

Single-photon detectors (SPDs) that can sense individual photons are the most sensitive instruments for photodetection. Established SPDs such as conventional silicon or III-V compound semiconductor avalanche diodes and photomultiplier tubes have been used in a wide range of time-correlated photon-counting applications, including quantum information technologies, in vivo biomedical imaging, time-of-flight 3D scanners, and deep-space optical communications. However, further development of these fields requires more sophisticated detectors with high detection efficiency, fast response, and photon-number-resolving ability, etc. Thereby, significant efforts have been made to improve the performance of conventional SPDs and to develop new photon-counting technologies. In this review, the working mechanisms and key performance metrics of conventional SPDs are first summarized. Then emerging photon-counting detectors (in the visible to infrared range) based on 0D quantum dots, 1D quantum nanowires, and 2D layered materials are discussed. These low-dimensional materials exhibit many exotic properties due to the quantum confinement effect. And photodetectors built from these nD-materials (n = 0, 1, 2) can potentially be used for ultra-weak light detection. By reviewing the status and discussing the challenges faced by SPDs, this review aims to provide future perspectives on the research directions of emerging photon-counting technologies.

SRH suppressed P-G-I design for very long-wavelength infrared HgCdTe photodiodes.

The very long wavelength infrared (VLWIR, >14 µm) spectral band is an indispensable part of new-generation infrared remote sensing. Mercury cadmium telluride (HgCdTe or MCT) has shown excellent potential across the entire infrared band. However, the dark current, which is extremely sensitive to the technological level and small Cd composition, severely limits the performance of VLWIR HgCdTe photodiodes. In this study, cut-off wavelengths of up to 15 µm for HgCdTe devices with novel P-G-I (including wide bandgap p-type cap layer, grading layer and intrinsic absorption layer) designs have been reported. Compared with a device with a double-layer heterojunction (DLHJ) structure, the designed P-G-I structure successfully reduced dark current by suppressing the Shockley-Read-Hall process. Considering the balance of quantum efficiency and dark current, with the introduction of an approximately 0.8 µm thickness Cd composition grading layer, the device can achieve a high detectivity of up to 2.5×1011 cm Hz1/2 W-1. Experiments show that the P-G-I-T device has a lower dark current and a better SRH process suppressing ability than DLHJ devices, the measured detectivity achieved 8.7×1010 cm Hz1/2 W-1. According to additional research, the trap-assisted tunneling current is the primary component of the dark current. Controlling the trap concentration to as low as 1×1013 cm-3 will be continuous and meaningful work. The proposed study provides guidance for VLWIR HgCdTe photodetectors.

Down-Scalable and Ultra-fast Memristors with Ultra-high Density Three-Dimensional Arrays of Perovskite Quantum Wires.

With strikingly high speed, data retention ability and storage density, resistive RAMs have emerged as a forerunning nonvolatile memory. Here we developed a Re-RAM with ultra-high density array of monocrystalline perovskite quantum wires (QWs) as the switching matrix with a metallic silver conducting pathway. The devices demonstrated high ON/OFF ratio of ∼107 and ultra-fast switching speed of ∼100 ps which is among the fastest in literature. The devices also possess long retention time of over 2 years and record high endurance of ∼6 × 106 cycles for all perovskite Re-RAMs reported. As a concept proof, we have also successfully demonstrated a flexible Re-RAM crossbar array device with a metal-semiconductor-insulator-metal design for sneaky path mitigation, which can store information with long retention. Aggressive downscaling to ∼14 nm lateral dimension produced an ultra-small cell effectively having 76.5 nm2 area for single bit storage. Furthermore, the devices also exhibited unique optical programmability among the low resistance states.

Slowing Hot-Electron Relaxation in Mix-Phase Nanowires for Hot-Carrier Photovoltaics.

Hot carrier harvest could save 30% energy loss in solar cells. So far, however, it is still unreachable as the photoexcited hot carriers are short-lived, ∼1 ps, determined by a rapid relaxation process, thus invalidating any reprocessing efforts. Here, we propose and demonstrate a feasible route to reserve hot electrons for efficient collection. It is accomplished by an intentional mix of cubic zinc-blend and hexagonal wurtzite phases in III-V semiconductor nanowires. Additional energy levels are then generated above the conduction band minimum, capturing and storing hot electrons before they cool down to the band edges. We also show the superiority of core/shell nanowire (radial heterostructure) in extracting hot electrons. The strategy disclosed here may offer a unique opportunity to modulate hot carriers for efficient solar energy harvest.

Extrinsic Photoconduction Induced Short-Wavelength Infrared Photodetectors Based on Ge-Based Chalcogenides.

2D layered photodetectors have been widely researched for intriguing optoelectronic properties but their application fields are limited by the bandgap. Extending the detection waveband can significantly enrich functionalities and applications of photodetectors. For example, after breaking through bandgap limitation, extrinsic Si photodetectors are used for short-wavelength infrared or even long-wavelength infrared detection. Utilizing extrinsic photoconduction to extend the detection waveband of 2D layered photodetectors is attractive and desirable. However, extrinsic photoconduction has yet not been observed in 2D layered materials. Here, extrinsic photoconduction-induced short-wavelength infrared photodetectors based on Ge-based chalcogenides are reported for the first time and the effectiveness of intrinsic point defects are demonstrated. The detection waveband of room-temperature extrinsic GeSe photodetectors with the assistance of Ge vacancies is broadened to 1.6 µm. Extrinsic GeSe photodetectors have an excellent external quantum efficiency (0.5%) at the communication band of 1.31 µm and polarization-resolved capability to subwaveband radiation. Moreover, room-temperature extrinsic GeS photodetectors with a detection waveband to the communication band of 1.55 µm further verify the versatility of intrinsic point defects. This approach provides design strategies to enrich the functionalities of 2D layered photodetectors.

Substitutionally Doped MoSe2 for High-Performance Electronics and Optoelectronics.

2D materials, of which the carrier type and concentration are easily tuned, show tremendous superiority in electronic and optoelectronic applications. However, the achievements are still quite far away from practical applications. Much more effort should be made to further improve their performance. Here, p-type MoSe2 is successfully achieved via substitutional doping of Ta atoms, which is confirmed experimentally and theoretically, and outstanding homojunction photodetectors and inverters are fabricated. MoSe2 p-n homojunction device with a low reverse current (300 pA) exhibits a high rectification ratio (104 ). The analysis of dark current reveals the domination of the Shockley-Read-Hall (SRH) and band-to-band tunneling (BTB) current. The homojunction photodetector exhibits a large open-circuit voltage (0.68 V) and short-circuit currents (1 µA), which is suitable for micro-solar cells. Furthermore, it possesses outstanding responsivity (0.28 A W-1 ), large external quantum efficiency (42%), and a high signal-to-noise ratio (≈107 ). Benefiting from the continuous energy band of homojunction, the response speed reaches up to 20 µs. Besides, the Ta-doped MoSe2 inverter exhibits a high voltage gain (34) and low power consumption (127 nW). This work lays a foundation for the practical application of 2D material devices.

Spatial description theory of narrow-band single-carrier avalanche photodetectors.

The avalanche is the foundation of the understanding and vast applications of the breakdown of semiconductors and insulators. Present numerical theories analyzing the avalanche photodetectors are mainly split into two categories: the macroscopic empirical model with fitting parameters and the microscopic process simulation with statistical estimations. Here, we present a parameter-free analytic theory of the avalanche for a narrow-band material, HgCdTe, originated from quantum mechanics, avoiding any fitting parameter or any statistical estimation while taking advantage of both categories. Distinct from classical theory, we propose a full spatial description of an avalanche with basic concepts such as transition rate and equation of motion modified. As a stochastic process, the probability density function (PDF) of impact ionization is utilized in a generalized history-dependent theory. On account of different carrier generation character of light and leakage current, we suggest that carrier generated at different positions should be considered separately, which is done by generalized history-dependent theory in our work. Further, in our calculation, the reason for the abnormal rise of excess noise factor (ENF) observed in the experiment in single-carrier avalanche photodetectors is clarified.

Skin effect photon-trapping enhancement in infrared photodiodes.

With the development of infrared optoelectronic technology, high responsivity, ultra-low dark current, and high response speed have become important factors of the next generation of infrared photodiodes. However, the minimum thickness of the absorber layer is limited to approximately one or several wavelength lengths to acquire high quantum efficiency, which results in a long transit time of photogenerated carriers. In this work, we propose a photon-trapping structure that uses the skin effect of metals to generate horizontal local modes to enhance the absorption of infrared photodiodes. The photon-trapping structure consists of an artificial grating structure covered by a metallic film. Importantly, we develop a simplified theoretical model to describe the local mode, which is then being used to design the realistic photon-trapping structure presented in this work. This design method is universal and we discuss the optical properties of the photon-trapping structure in InAs, InSb, InAs/GaSb type-II superlattices, InAs/InAsSb type-II superlattices, and HgCdTe infrared photodiodes. Both absorption of optical properties and responsivity of optoelectrical properties are numerically investigated in a systematic way. The optical simulations indicate that the absorption of the HgCdTe infrared photodiodes exceeds 80% at 8.5 ∼ 11 µm with a maximum value of 95% at 9.73 µm. The optoelectrical simulations show that the responsivity at 7 ∼ 10 µm is significantly enhanced compared to that of the plain HgCdTe infrared photodiodes without the photon-trapping structure. We further investigate the optical crosstalk in the HgCdTe pixel array employing the photon-trapping structure. The optical crosstalk significantly reduces as the pixel spacing increases. Our work provides a design method for developing small pixel, large scale, and low dark current focal plane array infrared photodiodes.

Simultaneous control of intensity, phase, and polarization in real time under a weak oscillation theory.

Manipulating polarization, phase, and amplitude simultaneously in real time is an ultimate pursuit of controlling light. Several types of controllable metasurfaces have been realized, but with either low transmission efficiencies or limited control over amplitude, polarization, and phase in real time. Here we present a weak oscillation theory dealing with a new, to the best of our knowledge, type of optical system consisting of many layers of artificial oscillators, with each layer weakly interacting with the external field. As an application of our theory, we demonstrate and simulate a graphene-based metasurface structure to show that the oscillator system could change the focal length by changing the bias voltages. The polarization state to focus can also be selected by the bias voltage. The weak oscillation theory provides a flexible method to control the intensity, phase, and polarization.

Extended infrared responses in Er/O-hyperdoped Si at room temperature.

Silicon photonics has become the preferred candidate for technologies applicable to multifarious fields. However, the applications are strictly limited by the intrinsic in-band photo effect of silicon. Herein, near-infrared photodetectors that break through the silicon bandgap by Er/O hyperdoping are fabricated, potentially extending their applications into telecommunications, low-light-level night vision, medical treatment, and others. Er/O-hyperdoped silicon was achieved as an infrared light absorption layer through ion implantation. The lattice damage caused by ion implantation was repaired by a deep cooling process in which high-temperature samples were cooled by helium flushing cooled by liquid nitrogen. Traditional junction and metallization processes were performed to form a photodiode. We demonstrate that the device has a spectral range up to the wavelength of 1568 nm, a maximum responsivity of 165 µA/W at 1310 nm, and 3 dB cutoff bandwidth up to 3 kHz. Finally, temperature-dependent optical-electrical characteristics were measured to demonstrate the activation mechanism of Er/O in silicon. This Letter proves silicon's potential in realizing extended infrared detection at room temperature, and it provides a possible way to fabricate infrared optoelectronics and signal processing integrated chips on a CMOS (complementary metal-oxide-semiconductor) platform.

Coexistence of Photoelectric Conversion and Storage in van der Waals Heterojunctions.

Van der Waals (vdW) heterojunctions, based on two-dimensional (2D) materials, have great potential for the development of ecofriendly and high-efficiency nanodevices, which shows valuable applications as photovoltaic cells, photodetectors, etc. However, the coexistence of photoelectric conversion and storage in a single device has not been achieved until now. Here, we demonstrate a simple strategy to construct a vdW p-n junction between a WSe_{2} layer and quasi-2D electron gas. After an optical illumination, the device stores the light-generated carriers for up to seven days, and then releases a very large photocurrent of 2.9 mA with bias voltage applied in darkness; this is referred to as chargeable photoconductivity (CPC), which completely differs from any previously observed photoelectric phenomenon. In normal photoconductivity, the recombination of electron-hole pairs occurs at the end of their lifetime; in contrast, infinite-lifetime photocarriers can be generated and stored in CPC devices without recombination. The photoelectric conversion and storage are completely self-excited during the charging process. The ratio between currents in full- and empty-photocarrier states below the critical temperature reaches as high as 10^{9}, with an external quantum efficiency of 93.8% during optical charging. A theoretical model developed to explain the mechanism of this effect is in good agreement with the experimental data. This work paves a path toward the high-efficiency devices for photoelectric conversion and storage.