Harnessing Liquid Crystal Sensors for High-Throughput Real-Time Detection of Structural Changes in Lysozyme during Refolding Processes.

Despite the rapid advances in process analytical technology, the assessment of protein refolding efficiency has largely relied on off-line protein-specific assays and/or chromatographic procedures such as reversed-phase high-performance liquid chromatography and size exclusion chromatography. Due to the inherent time gap pertaining to traditional methods, exploring optimum refolding conditions for many recombinant proteins, often expressed as insoluble inclusion bodies, has proven challenging. The present study describes a novel protein refolding sensor that utilizes liquid crystals (LCs) to discriminate varying protein structures during unfolding and refolding. An LC layer containing 4-cyano-4'-pentylbiphenyl (5CB) intercalated with 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) is used as a sensing platform, and its proof-of-concept performance is demonstrated using lysozyme as a model protein. As proteins unfold or refold, a local charge fluctuation at their surfaces modulates their interaction with zwitterionic phospholipid DOPE. This alters the alignment of DOPE molecules at the aqueous/LC interface, affecting the orientational ordering of bulk LC (i.e., homeotropic to planar for refolding and planar to homeotropic for unfolding). Differential polarized optical microscope images of the LC layer are subsequently generated, whose brightness directly linked to conformational changes of lysozyme molecules is quantified by gray scale analysis. Importantly, our LC-based refolding sensor is compatible with diverse refolding milieus for real-time analysis of lysozyme refolding and thus likely to facilitate the refolding studies of many proteins, especially those lacking a method to determine structure-dependent biological activity.

An integrated and continuous downstream process for microbial virus-like particle vaccine biomanufacture.

In this study, we present the first integrated and continuous downstream process for the production of microbial virus-like particle vaccines. Modular murine polyomavirus major capsid VP1 with integrated J8 antigen was used as a model virus-like particle vaccine. The integrated continuous downstream process starts with crude cell lysate and consists of a flow-through chromatography step followed by periodic counter-current chromatography (PCC) (bind-elute) using salt-tolerant mixed-mode resin and subsequent in-line assembly. The automated process showed a robust behavior over different inlet feed concentrations ranging from 1.0 to 3.2 mg ml-1 with only minimal adjustments needed, and produced continuously high-quality virus-like particles, free of nucleic acids, with constant purity over extended periods of time. The average size remained constant between 44.8 ± 2.3 and 47.2 ± 2.9 nm comparable to literature. The process had an overall product recovery of 88.6% and a process productivity up to 2.56 mg h-1 mlresin-1 in the PCC step, depending on the inlet concentration. Integrating a flow through step with a subsequent PCC step allowed streamlined processing, showing a possible continuous pathway for a wide range of products of interest.

Virus-like particle preparation is improved by control over capsomere-DNA interactions during chromatographic purification.

Expression of viral capsomeres in bacterial systems and subsequent in vitro assembly into virus-like particles is a possible pathway for affordable future vaccines. However, purification is challenging as viral capsomeres show poor binding to chromatography media. In this study, the behavior of capsomeres in unfractionated bacterial lysate was compared with that for purified capsomeres, with or without added microbial DNA, to better understand reasons for poor bioprocess behavior. We show that aggregates or complexes form through the interaction between viral capsomeres and DNA, especially in bacterial lysates rich in contaminating DNA. The formation of these complexes prevents the target protein capsomeres from accessing the pores of chromatography media. We find that protein-DNA interactions can be modulated by controlling the ionic strength of the buffer and that at elevated ionic strengths the protein-DNA complexes dissociate. Capsomeres thus released show enhanced bind-elute behavior on salt-tolerant chromatography media. DNA could therefore be efficiently removed. We believe this is the first report of the use of an optimized salt concentration that dissociates capsomere-DNA complexes yet enables binding to salt-tolerant media. Post purification, assembly experiments indicate that DNA-protein interactions can play a negative role during in vitro assembly, as DNA-protein complexes could not be assembled into virus-like particles, but formed worm-like structures. This study reveals that the control over DNA-protein interaction is a critical consideration during downstream process development for viral vaccines.

Synthetic biology for bioengineering virus-like particle vaccines.

Vaccination is the most effective method of disease prevention and control. Many viruses and bacteria that once caused catastrophic pandemics (e.g., smallpox, poliomyelitis, measles, and diphtheria) are either eradicated or effectively controlled through routine vaccination programs. Nonetheless, vaccine manufacturing remains incredibly challenging. Viruses exhibiting high antigenic diversity and high mutation rates cannot be fairly contested using traditional vaccine production methods and complexities surrounding the manufacturing processes, which impose significant limitations. Virus-like particles (VLPs) are recombinantly produced viral structures that exhibit immunoprotective traits of native viruses but are noninfectious. Several VLPs that compositionally match a given natural virus have been developed and licensed as vaccines. Expansively, a plethora of studies now confirms that VLPs can be designed to safely present heterologous antigens from a variety of pathogens unrelated to the chosen carrier VLPs. Owing to this design versatility, VLPs offer technological opportunities to modernize vaccine supply and disease response through rational bioengineering. These opportunities are greatly enhanced with the application of synthetic biology, the redesign and construction of novel biological entities. This review outlines how synthetic biology is currently applied to engineer VLP functions and manufacturing process. Current and developing technologies for the identification of novel target-specific antigens and their usefulness for rational engineering of VLP functions (e.g., presentation of structurally diverse antigens, enhanced antigen immunogenicity, and improved vaccine stability) are described. When applied to manufacturing processes, synthetic biology approaches can also overcome specific challenges in VLP vaccine production. Finally, we address several challenges and benefits associated with the translation of VLP vaccine development into the industry.

Impact of Site-Specific Bioconjugation on the Interfacial Activity of a Protein Biosurfactant.

Biosurfactants are surface active molecules that can be produced by renewable, industrially scalable biologic processes. DAMP4, a designer biosurfactant, enables the modification of interfaces via genetic or chemical fusion to functional moieties. However, bioconjugation of addressable amines introduces heterogeneity that limits the precision of functionalization as well as the resolution of interfacial characterization. Here, we designed DAMP4 variants with cysteine point mutations to allow for site-specific bioconjugation. The DAMP4 variants were shown to retain the structural stability and interfacial activity characteristic of the parent molecule, while permitting efficient and specific conjugation of polyethylene glycol (PEG). PEGylation results in a considerable reduction on the interfacial activity of both single and double mutants. Comparison of conjugates with one or two conjugation sites shows that both the number of conjugates as well as the mass of conjugated material impact the interfacial activity of DAMP4. As a result, the ability of DAMP4 variants with multiple PEG conjugates to impart colloidal stability on peptide-stabilized emulsions is reduced. We suggest that this is due to steric constraints on the structures of amphiphilic helices at the interface. Specific and efficient bioconjugation permits the exploration and investigation of the interfacial properties of designer protein biosurfactants with molecular precision. Our findings should therefore inform the design and modification of biosurfactants for their increasing use in industrial processes and nutritional and pharmaceutical formulations.

Bioinspired Core-Shell Nanoparticles for Hydrophobic Drug Delivery.

A large range of nanoparticles have been developed to encapsulate hydrophobic drugs. However, drug loading is usually less than 10 % or even 1 %. Now, core-shell nanoparticles are fabricated having exceptionally high drug loading up to 65 % (drug weight/the total weight of drug-loaded nanoparticles) and high encapsulation efficiencies (>99 %) based on modular biomolecule templating. Bifunctional amphiphilic peptides are designed to not only stabilize hydrophobic drug nanoparticles but also induce biosilicification at the nanodrug particle surface thus forming drug-core silica-shell nanocomposites. This platform technology is highly versatile for encapsulating various hydrophobic cargos. Furthermore, the high drug loading nanoparticles lead to better in vitro cytotoxic effects and in vivo suppression of tumor growth, highlighting the significance of using high drug-loading nanoparticles.

Controlled Generation of Ultrathin-Shell Double Emulsions and Studies on Their Stability.

Double emulsions with a hierarchical core-shell structure have great potential in various applications, but their broad use is limited by their instability. To improve stability, water-in-oil-in-water (W/O/W) emulsions with an ultrathin oil layer of several hundred nanometres were produced by using a microcapillary device. The effects of various parameters on the generation of ultrathin-shell double emulsions and their droplet size were investigated, including the proper combinations of inner, middle and outer phases, flow rates and surfactants. The surfactant in the middle oil phase was found to be critical for the formation of the ultrathin-shell double emulsions. Furthermore, the stability of these double emulsions can be notably improved by increasing the concentration of the surfactant, and they can be stable for months. This opens up new opportunities for their future applications in cosmetics, foods and pharmaceuticals.

From Folding to Function: Design of a New Switchable Biosurfactant Protein.

A new anionic biosurfactant protein (SP16) capable of tuning foaming behaviour by pH or salt has been designed. This biosurfactant exhibits unique foaming behaviour with high sensitivity to pH. A good level of foaming was observed at pH 2 but not at pH 3. A further increase by one pH unit to pH 4 restored good foaming. At pH 5-8, SP16 again showed low foaming propensity, whereas the presence of salt (NaCl) was able to restore foaming again. Interfacial tension and circular dichroism investigations revealed the foaming control mechanism. The high negative charge (-16.6) at pH 6 and above restricted the ability of SP16 to fold into an α-helical conformation and also restricted surface activity. For pH 5 (-13.6), even though SP16 folds in bulk to give α-helical structure, the high charge inhibited adsorption at the air-water interface, resulting in a significant lag time of about 150-200 sec to achieve a decrease in interfacial tension. In contrast to its low foaming behaviour at pH 5-8, the presence of salt (NaCl) was found to effectively screen negative charge, thus leading to its folding and a decrease of interfacial tension. This new design offers a new strategy to control foaming behaviour, and elaborates a clear link between charge, structure and interfacial activity for biosurfactants.

Non-chromatographic bioprocess engineering of a recombinant mineralizing protein for the synthesis of silica nanocapsules.

Inspired by nature, synthetic mineralizing proteins have been developed to synthesize various structures of silica-based nanomaterials under environmentally friendly conditions. However, the development of bioprocesses able to assist in the translation of these new materials has lagged the development of the materials themselves. The development of cost-effective and scalable bioprocesses which minimize reliance on chromatography to recover biomolecules from microbial cell factories remains a significant challenge. This paper reports a simplified purification process for a recently reported recombinant catalytic modular (D4S2) protein (M(DPSMKQLADS-LHQLARQ-VSRLEHA)4 EPSRKKRKKRKKRKKGGGY; M 13.3 kDa; pI 10.9), which combines a variant of the established designer biosurfactant protein DAMP4 with a new biomimetic sequence (RKKRKKRKKRKKGGGY), providing for a bi-modular functionality (emulsification and biosilicification). The four-helix bundle structure of the protein has been demonstrated to remain stable and soluble under high temperature and high salt conditions, which confers simplified bioprocessing character. However, the high positive charge on the biosilification sequence necessitates removal of DNA contaminants from crude cell-extract at an early stage in the process by adding poly(ethyleneimine) (PEI). In this process, cellular protein contaminants were selectively precipitated by adding Na2 SO4 to the protein mixture up to a high concentration (1 M) and mixed at high temperature (90°C, 5 min) where D4S2 remained stable and soluble due to its four-helix bundle structure. Further increase of the Na2 SO4 concentration to 1.8 M precipitated, thus separated, D4S2 from residual PEI. The overall yield of the protein D4S2 was 28.8 mg per 800 mL cells (final cultivation OD600 ∼2) which gives an approximate 79% D4S2-protein yield. In comparison with the previously reported chromatographic purification of D4S2 protein (Wibowo et al., 2015), the final yield of D4S2 protein is increased fourfold in this study. The bio-produced protein D4S2 was proved to retain it emulsification and biosilicification functionalities enabling the formation of oil-core silica-shell nanocapsules at near-neutral pH and room temperature without the use of any toxic organic solvents, confirming no adverse effects due to bioprocess simplification. This work demonstrates that, through proper bioprocess engineering including the removal of critical contaminants such as DNA, a more efficient, simple, and scalable purification process can be used for the high-yield bio-production of a recombinant templating protein useful in the synthesis of bio-inspired nanomaterials. This simplified process is expected to be easily adapted to recover other mineralizing helix bundle-based functional proteins from microbial cell factories. Biotechnol. Bioeng. 2017;114: 335-343. © 2016 Wiley Periodicals, Inc.

Integrated molecular and bioprocess engineering for bacterially produced immunogenic modular virus-like particle vaccine displaying 18 kDa rotavirus antigen.

A high global burden of rotavirus disease and the unresolved challenges with the marketed rotavirus vaccines, particularly in the developing world, have ignited efforts to develop virus-like particle (VLP) vaccines for rotavirus. While rotavirus-like particles comprising multiple viral proteins can be difficult to process, modular VLPs presenting rotavirus antigenic modules are promising alternatives in reducing process complexity and cost. In this study, integrated molecular and bioprocess engineering approaches were used to simplify the production of modular murine polyomavirus capsomeres and VLPs presenting a rotavirus 18 kDa VP8* antigen. A single construct was generated for dual expression of non-tagged murine polyomavirus capsid protein VP1 and modular VP1 inserted with VP8*, for co-expression in Escherichia coli. Co-expressed proteins assembled into pentameric capsomeres in E. coli. A selective salting-out precipitation and a polishing size exclusion chromatography step allowed the recovery of stable modular capsomeres from cell lysates at high purity, and modular capsomeres were successfully translated into modular VLPs when assembled in vitro. Immunogenicity study in mice showed that modular capsomeres and VLPs induced high levels of VP8*-specific antibodies. Our results demonstrate that a multipronged synthetic biology approach combining molecular and bioprocess engineering enabled simple and low-cost production of highly immunogenic modular capsomeres and VLPs presenting conformational VP8* antigenic modules. This strategy potentially provides a cost-effective production route for modular capsomere and VLP vaccines against rotavirus, highly suitable to manufacturing economics for the developing world. Biotechnol. Bioeng. 2017;114: 397-406. © 2016 Wiley Periodicals, Inc.

Design of Modular Peptide Surfactants and Their Surface Activity.

Designed peptide surfactants offer a number of advanced properties over conventional petrochemical surfactants, including biocompatibility, sustainability, and tailorability of the chemical and physical properties through peptide design. Their biocompatibility and degradability make them attractive for various applications, particularly for food and pharmaceutical applications. In this work, two new peptide surfactants derived from an amphiphilic peptide surfactant (AM1) were designed (AM-S and C8-AM) to better understand links between structure, interfacial activity, and emulsification. Based on AM1, which has an interfacial α-helical structure, AM-S and C8-AM were designed to have two modules, that is, the α-helical AM1 module and an additional hydrophobic moiety to provide for better anchoring at the oil-water interface. Both AM-S and C8-AM at low bulk concentration of 20 µM were able to adsorb rapidly at the oil-water interface and reduced interfacial tension to equilibrium values of 17.0 and 8.4 mN/m within 400 s, respectively. Their relatively quick adsorption kinetics allowed the formation of nanoemulsions with smaller droplet sizes and narrower size distribution. AM-S and C8-AM at 800 µM bulk concentration could make nanoemulsions of average diameters 180 and 147 nm, respectively, by simple sonication. With respect to the long-term stability, a minimum peptide concentration of 400 µM for AM-S and a lower concentration of 100 µM for C8-AM were demonstrated to effectively stabilize nanoemulsions over 3 weeks. Compared to AM1, the AM-S nanoemulsion retained its stimuli-responsive function triggered by metal ions, whereas the C8-AM nanoemulsions did not respond to the stimuli as efficiently as AM-S because of the strong anchoring ability of the hydrophobic C8 module. The two-module design of AM-S and C8-AM represents a new strategy in tuning the surface activity of peptide surfactants, offering useful information and guidance of future designs.

Biomimetic Silica Nanocapsules for Tunable Sustained Release and Cargo Protection.

Silica nanocapsules have attracted tremendous interest for encapsulation, protection, and controlled release of various cargoes due to their unique hierarchical core-shell structure. However, it remains challenging to synthesize silica nanocapsules having high cargo-loading capacity and cargo-protection capability without compromising process simplicity and biocompatibility properties. Here, we synthesized oil-core silica-shell nanocapsules under environmentally friendly conditions by a novel emulsion and biomimetic dual-templating approach using a dual-functional protein, in lieu of petrochemical surfactants, thus avoiding the necessities for the removal of toxic components. A light- and pH-sensitive compound can be facilely encapsulated in the silica nanocapsules with the encapsulation efficiency of nearly 100%. Release of the encapsulated active from the nanocapsules was not shown an indication of undesired burst release. Instead, the release can be tuned by controlling the silica-shell thicknesses (i.e., 40 and 77 nm from which the cargo released at 42.0 and 31.3% of the initial amount after 32 days, respectively). The release kinetics were fitted well to the Higuchi model, enabling the possibility of the prediction of release kinetics as a function of shell thickness, thus achieving design-for-purpose silica nanocapsules. Furthermore, the nanocapsules showed excellent alkaline- and sunlight-shielding protective efficacies, which resulted in significantly prolonged half-life of the sensitive cargo. Our biomimetic silica nanocapsules provide a nanocarrier platform for applications that demand process scalability, sustainability, and biocompatibility coupled with unique cargo-protection and controlled-release properties.

Insights into the interfacial structure-function of poly(ethylene glycol)-decorated peptide-stabilised nanoscale emulsions.

The interfacial properties of nanoscale materials have profound influence on biodistribution and stability as well as the effectiveness of sophisticated surface-encoded properties such as active targeting to cell surface receptors. Tailorable nanocarrier emulsions (TNEs) are a novel class of oil-in-water emulsions stabilised by molecularly-engineered biosurfactants that permit single-pot stepwise surface modification with related polypeptides that may be chemically conjugated or genetically fused to biofunctional moieties. We have probed the structure and function of poly(ethylene glycol) (PEG) used to decorate TNEs in this way. The molecular weight of PEG decorating TNEs has considerable impact on the ζ-potential of the emulsion particles, related to differential interfacial thickness of the PEG layer as determined by X-ray reflectometry. By co-modifying TNEs with an antibody fragment, we show that the molecular weight and density of PEG governs the competing parameters of accessibility of the targeting moiety and of shielding the interface from non-specific interactions with the environment. The fundamental understanding of the molecular details of the PEG layer that we present provides valuable insights into the structure-function relationship for soft nanomaterial interfaces. This work therefore paves the way for further rational design of TNEs and other nanocarriers that must interact with their environment in controlled and predictable ways.

Stable Ultrathin-Shell Double Emulsions for Controlled Release.

Double emulsions are normally considered as metastable systems and this limit in stability restricts their applications. To enhance their stability, the outer shell can be converted into a mechanically strong layer, for example, a polymeric layer, thus allowing improved performance. This conversion can be problematic for food and drug applications, as a toxic solvent is needed to dissolve the polymer in the middle phase and a high temperature is required to remove the solvent. This process can also be highly complex, for example, involving UV initiation of polymeric monomer crosslinking. In this study, we report the formation of biocompatible, water-in-oil-in-water (W/O/W) double emulsions with an ultrathin layer of fish oil. We demonstrate their application for the encapsulation and controlled release of small hydrophilic molecules. Without a trigger, the double emulsions remained stable for months, and the release of small molecules was extremely slow. In contrast, rapid release was achieved by osmolarity shock, leading to complete release within 2 h. This work demonstrates the significant potential of double emulsions, and provides new insights into their stability and practical applications.

Biomolecular engineering of virus-like particles aided by computational chemistry methods.

Virus-like particles (VLPs) are repetitive organizations of viral proteins assembled in an appropriate physicochemical environment. VLPs can stimulate both innate and adaptive immune responses, due to their particulate structure enabling uptake by antigen presenting cells. These characteristics have led to successful development of VLP-vaccine products, and will ensure their vast potential in years to come. Future success of VLP therapeutic products will be determined by advances in their bioengineering, and also by the development of tools to design for their stability, function and application. This review focuses on approaches for VLP assembly in controlled chemical environments in vivo and in vitro, and the application of computational tools for improved chemical sequence design, and fundamental understanding of assembly.

A simple and low-cost platform technology for producing pexiganan antimicrobial peptide in E. coli.

Antimicrobial peptides, as a new class of antibiotics, have generated tremendous interest as potential alternatives to classical antibiotics. However, the large-scale production of antimicrobial peptides remains a significant challenge. This paper reports a simple and low-cost chromatography-free platform technology for producing antimicrobial peptides in Escherichia coli (E. coli). A fusion protein comprising a variant of the helical biosurfactant protein DAMP4 and the known antimicrobial peptide pexiganan is designed by joining the two polypeptides, at the DNA level, via an acid-sensitive cleavage site. The resulting DAMP4(var)-pexiganan fusion protein expresses at high level and solubility in recombinant E. coli, and a simple heat-purification method was applied to disrupt cells and deliver high-purity DAMP4(var)-pexiganan protein. Simple acid cleavage successfully separated the DAMP4 variant protein and the antimicrobial peptide. Antimicrobial activity tests confirmed that the bio-produced antimicrobial peptide has the same antimicrobial activity as the equivalent product made by conventional chemical peptide synthesis. This simple and low-cost platform technology can be easily adapted to produce other valuable peptide products, and opens a new manufacturing approach for producing antimicrobial peptides at large scale using the tools and approaches of biochemical engineering.

Interfacial biomimetic synthesis of silica nanocapsules using a recombinant catalytic modular protein.

This paper reports interfacially driven synthesis of oil-core silica-shell nanocapsules using a rationally designed recombinant catalytic modular protein (ReCaMoP), in lieu of a conventional chemical surfactant. A 116-residue protein, D4S2, was designed by modularizing a surface-active protein module having four-helix bundle structure in bulk and a biosilicification-active peptide module rich in cationic residues. This modular combination design allowed the protein to be produced via the industrially relevant cell factory Escherichia coli with simplified purification conferred by thermostability engineered in design. Dynamic interfacial tension and thin film pressure balance were used to gain an overview of the protein behavior at macroscopic interfaces. Functionalities of D4S2 to make silica nanocapsules were demonstrated by facilitating formation and stabilization of pharmaceutically grade oil droplets through its surface-active module and then by directing nucleation and growth of a silica shell at the oil-water interface through its biosilicification-active module. Through these synergistic activities in D4S2, silica nanocapsules could be formed at near-neutral pH and ambient temperature without using any organic solvents that might have negative environmental and sustainability impacts. This work introduces parallelization of biomolecular, scale-up and interfacial catalytic design strategies for the ultimate development of sustainable and scalable production of a recombinant modular protein that is able to catalyze synthesis of oil-filled silica nanocapsules under environmentally friendly conditions, suitable for use as controlled-release nanocarriers of various actives in biomedical and agricultural applications.

Computational study of elements of stability of a four-helix bundle protein biosurfactant.

Biosurfactants are surface-active molecules produced principally by microorganisms. They are a sustainable alternative to chemically-synthesized surfactants, having the advantages of being non-toxic, highly functional, eco-friendly and biodegradable. However they are currently only used in a few industrial products due to costs associated with production and purification, which exceed those for commodity chemical surfactants. DAMP4, a member of a four-helix bundle biosurfactant protein family, can be produced in soluble form and at high yield in Escherichia coli, and can be recovered using a facile thermal phase-separation approach. As such, it encompasses an interesting synergy of biomolecular and chemical engineering with prospects for low-cost production even for industrial sectors. DAMP4 is highly functional, and due to its extraordinary thermal stability it can be purified in a simple two-step process, in which the combination of high temperature and salt leads to denaturation of all contaminants, whereas DAMP4 stays stable in solution and can be recovered by filtration. This study aimed to characterize and understand the fundamental drivers of DAMP4 stability to guide further process and surfactant design studies. The complementary use of experiments and molecular dynamics simulation revealed a broad pH and temperature tolerance for DAMP4, with a melting point of 122.4 °C, suggesting the hydrophobic core as the major contributor to thermal stability. Simulation of systematically created in silico variants of DAMP4 showed an influence of number and location of hydrophilic mutations in the hydrophobic core on stability, demonstrating a tolerance of up to three mutations before a strong loss in stability occurred. The results suggest a consideration of a balance of stability, functionality and kinetics for new designs according to their application, aiming for maximal functionality but at adequate stability to allow for cost-efficient production using thermal phase separation approaches.

Microbially synthesized modular virus-like particles and capsomeres displaying group A streptococcus hypervariable antigenic determinants.

Effective and low-cost vaccines are essential to control severe group A streptococcus (GAS) infections prevalent in low-income nations and the Australian aboriginal communities. Highly diverse and endemic circulating GAS strains mandate broad-coverage and customized vaccines. This study describes an approach to deliver cross-reactive antigens from endemic GAS strains using modular virus-like particle (VLP) and capsomere systems. The antigens studied were three heterologous N-terminal peptides (GAS1, GAS2, and GAS3) from the GAS surface M-protein that are specific to endemic strains in Australia Northern Territory Aboriginal communities. In vivo data presented here demonstrated salient characteristics of the modular delivery systems in the context of GAS vaccine design. First, the antigenic peptides, when delivered by unadjuvanted modular VLPs or adjuvanted capsomeres, induced high titers of peptide-specific IgG antibodies (over 1 × 10(4) ). Second, delivery by capsomere was superior to VLP for one of the peptides investigated (GAS3), demonstrating that the delivery system relative effectiveness was antigen-dependant. Third, significant cross-reactivity of GAS2-induced IgG with GAS1 was observed using either VLP or capsomere, showing the possibility of broad-coverage vaccine design using these delivery systems and cross-reactive antigens. Fourth, a formulation containing three pre-mixed modular VLPs, each at a low dose of 5 µg (corresponding to <600 ng of each GAS peptide), induced significant titers of IgGs specific to each peptide, demonstrating that a multivalent, broad-coverage VLP vaccine formulation was possible. In summary, the modular VLPs and capsomeres reported here demonstrate, with promising preliminary data, innovative ways to design GAS vaccines using VLP and capsomere delivery systems amenable to microbial synthesis, potentially adoptable by developing countries.

Bioengineering virus-like particles as vaccines.

Virus-like particle (VLP) technology seeks to harness the optimally tuned immunostimulatory properties of natural viruses while omitting the infectious trait. VLPs that assemble from a single protein have been shown to be safe and highly efficacious in humans, and highly profitable. VLPs emerging from basic research possess varying levels of complexity and comprise single or multiple proteins, with or without a lipid membrane. Complex VLP assembly is traditionally orchestrated within cells using black-box approaches, which are appropriate when knowledge and control over assembly are limited. Recovery challenges including those of adherent and intracellular contaminants must then be addressed. Recent commercial VLPs variously incorporate steps that include VLP in vitro assembly to address these problems robustly, but at the expense of process complexity. Increasing research activity and translation opportunity necessitate bioengineering advances and new bioprocessing modalities for efficient and cost-effective production of VLPs. Emerging approaches are necessarily multi-scale and multi-disciplinary, encompassing diverse fields from computational design of molecules to new macro-scale purification materials. In this review, we highlight historical and emerging VLP vaccine approaches. We overview approaches that seek to specifically engineer a desirable immune response through modular VLP design, and those that seek to improve bioprocess efficiency through inhibition of intracellular assembly to allow optimal use of existing purification technologies prior to cell-free VLP assembly. Greater understanding of VLP assembly and increased interdisciplinary activity will see enormous progress in VLP technology over the coming decade, driven by clear translational opportunity.