Controlled Molecular Arrangement of Cinnamic Acid in Layered Double Hydroxide through pi-pi Interaction for Controlled Release.

Cinnamic acid (CA) was successfully incorporated into Zn-Al layered double hydroxide (LDH) through coprecipitation. The CA moiety was stabilized in the interlayer space through not only electrostatic interaction but also intermolecular π-π interaction. It was noteworthy that the CA arrangement was fairly independent of the charge density of LDH, showing the important role of the layer-CA and CA-CA interactions in molecular stabilization. Computer simulations using the Monte Carlo method as well as analytical approaches including infrared, UV-vis spectroscopy, and differential scanning calorimetry showed the existence of intermolecular interaction. In order to reinforce molecular stabilization, a neutral derivative of CA, cinnamaldehyde (CAD), was additionally incorporated into LDH. It was clearly shown that CAD played a role as a π-π interaction mediator to enhance the stabilization of CA. The time-dependent release of CA from LDH was first governed by the layer charge density of LDH; however, the existence of CAD provided additional stabilization to the CA arrangement to slow down the release kinetics.

Renewing Interest in Zeolites as Adsorbents for Capture of Cationic Dyes from Aqueous and Ethanolic Solutions: A Simulation-Based Insight into the Efficiency of Dye Adsorption in View of Wastewater Treatment and Valorization of Post-Sorption Materials.

The impact of solvents on the efficiency of cationic dye adsorption from a solution onto protonated Faujasite-type zeolite (FAU-Y) was investigated in the prospect of supporting potential applications in wastewater treatment or in the preparation of building blocks for optical devices. The adsorption isotherms were experimentally determined for methylene blue (MB) and auramine O (AO) from single-component solutions in water and in ethanol. The limiting dye uptake (saturation capacity) was evaluated for each adsorption system, and it decreased in the order of MB-water > AO-water > AO-ethanol > MB-ethanol. The mutual distances and orientations of the adsorbed dye species, and their interactions with the oxygen sites of the FAU-Y framework, with the solvent molecules, and among themselves were inferred from Monte Carlo simulations and subsequently utilized to rationalize the observed differences in the saturation capacity. The dye-solvent competition and the propensity of the dyes to form compact pi-stacked dimers were shown to play an important role in establishing a non-uniform distribution of the adsorbed species throughout the porous space. The two effects appeared particularly strong in the case of the MB-water system. The necessity of including solvent effects in modeling studies is emphasized.

Luminescent Single-Molecule Magnets as Dual Magneto-Optical Molecular Thermometers.

Luminescent thermometry allows the remote detection of the temperature and holds great potential in future technological applications in which conventional systems could not operate. Complementary approaches to measuring the temperature aiming to enhance the thermal sensitivity would however represent a decisive step forward. For the first time, we demonstrate the proof-of-concept that luminescence thermometry could be associated with a complementary temperature readout related to a different property. Namely, we propose to take advantage of the temperature dependence of both magnetic (canonical susceptibility and relaxation time) and luminescence features (emission intensity) found in Single-Molecule Magnets (SMM) to develop original dual magneto-optical molecular thermometers to conciliate high-performance SMM and Boltzmann-type luminescence thermometry. We highlight this integrative approach to concurrent luminescent and magnetic thermometry using an air-stable benchmark SMM [Dy(bbpen)Cl] (H2 bbpen=N,N'-bis(2-hydroxybenzyl)-N,N'-bis(2-methylpyridyl)ethyl-enediamine)) exhibiting Dy3+ luminescence. The synergy between multiparametric magneto-optical readouts and multiple linear regression makes possible a 10-fold improvement in the relative thermal sensitivity of the thermometer over the whole temperature range, compared with the values obtained with the single optical or magnetic devices.

Using N-Heterocyclic Carbenes as Weak Equatorial Ligands to Design Single-Molecule Magnets: Zero-Field Slow Relaxation in Two Octahedral Dysprosium(III) Complexes.

We report the synthesis, structures, and magnetic investigations of two new octahedral dysprosium complexes, based on the original N-heterocyclic carbene (NHC) tridentate bis(phenoxide) ligand, of the respective formulas mer-[DyL(THF)2Cl] (1) and mer-[DyL(THF)3][BPh4] (2), where L = 1,3-bis(3,5-di-tert-butyl-2-oxidophenyl)-5,5-dimethyl-3,4,5,6-tetrahydropyrimidin-1-ium chloride and THF = tetrahydrofuran. The short Dy-O distances in the axial direction in association with the weak donor ability of the NHC moiety provide a suitable environment for slow relaxation of magnetization, overcoming the previous single-molecule magnets based on NHC ligands.

Hydrolysis of the Borohydride Anion BH4-: A 11B NMR Study Showing the Formation of Short-Living Reaction Intermediates including BH3OH.

In hydrolysis and electro-oxidation of the borohydride anion BH4-, key reactions in the field of energy, one critical short-living intermediate is BH3OH-. When water was used as both solvent and reactant, only BH3OH- is detected by 11B NMR. By moving away from such conditions and using DMF as solvent and water as reactant in excess, four 11B NMR quartets were observed. These signals were due to BH3-based intermediates as suggested by theoretical calculations; they were DMF·BH3, BH3OH-, and B2H7- (i.e., [H3B-H-BH3]- or [H4B-BH3]-). Our results shed light on the importance of BH3 stemming from BH4- and on its capacity as Lewis acid to interact with Lewis bases such as DMF, OH-, and BH4-. These findings are important for a better understanding at the molecular level of hydrolysis of BH4- and production of impurities in boranes synthesis.

Towards improving the capacity of UiO-66 for antibiotic elimination from contaminated water.

Antibiotics are found in natural waters, raising concern about their human and environmental toxicity and the wide occurrence of antibiotic resistant bacteria. The antibiotic resistance crisis is attributed to the overuse and misuse of these medications. Particularly, sulfamethazine (SMT), an antibiotic commonly used in pigs and cattle for the treatment of bacterial diseases, has been detected in the natural environment (soil and water). Among all the technologies developed to combat the deteriorating water quality and control antimicrobial resistance, heterogeneous photocatalysis should be highlighted for the degradation of refractory organic compounds. Here, we described the SMT adsorption and photodegradation capacity of a highly porous and robust zirconium-based MOF UiO-66 under realistic conditions, and its potential recyclability. Further, its SMT removal capacity was improved by functionalizing the MOF porosity (28.5% of SMT adsorption in 24 h for nanoUiO-66-NH2), and nanosizing the MOF (100% SMT photodegradation in only 4 h for nanoUiO-66). Finally, the safety of the formed by-product during SMT photodegradation was confirmed, reinforcing the potential of the application of UiO-66 in water remediation.

Ion-Exchanged UPG-1 as Potential Electrolyte for Fuel Cells.

Proton-exchange membrane fuel cells are an attractive green technology for energy production. However, one of their major drawbacks is instability of the electrolytes under working conditions (i.e., temperature and humidity). Some metal-organic frameworks (MOFs) have recently emerged as promising alternative electrolyte materials because of their higher stability (compared with the organic polymers currently used as electrolytes), proton conductivity, and outstanding porosity and versatility. Here, we present ionic exchange in a microporous zirconium phosphonate, UPG-1, as an efficient strategy to enhance its conductivity and cyclability. Thus, labile protons of the hybrid structure were successfully replaced by different alkali cations (Li+, Na+, and K+), leading to 2 orders of magnitude higher proton conductivity than the pristine UPG-1 (up to 2.3 × 10-2 S·cm-1, which is comparable with those of the commercial electrolytes). Further, the proton conductivity was strongly influenced by the MOF hydrophilicity and the polarization strength of the cation, as suggested by molecular simulation. Finally, a mixed-matrix membrane containing the best-performing material (the potassium-exchanged one) was successfully prepared, showing moderate proton conductivity (up to 8.51 × 10-3 S·cm-1).

Systematic utilization of layered double hydroxide nanosheets for effective removal of methyl orange from an aqueous system by π-π stacking-induced nanoconfinement.

Systematic utilization of carbonated Mg-Al layered double hydroxide (LDH) nanosheets for methyl orange removal was investigated with respect to particle dimensions. LDHs with the smallest dimensions were carefully synthesized to have a small lateral size as well as high dispersibility. The other particles, with medium and large sizes, were prepared by hydrothermal treatment and urea hydrolysis to have larger sizes and higher crystallinity. According to kinetics and isotherm analyses, the smallest LDH showed efficient adsorption of methyl orange (1250 mg/g-LDH), which was remarkably higher than the adsorption by the other LDHs with larger lateral sizes. Unlike the larger lateral-sized LDHs, the small ones were shown to utilize all accessible adsorption sites on the nanosheets, generating nanoconfinement of methyl orange molecules. Transmission electron microscopy (TEM) and powder X-ray diffraction (PXRD) patterns indicated that the LDHs with lateral dimensions of ~40 nm fully utilized interlayer nanospace. Monte Carlo simulation suggested that the intercalated methyl orange was stabilized not only through electrostatic interactions with the LDH layer but also by π-π stacking between the methyl orange molecules, which is thought to be the driving force for replacement of carbonate anions.

Zirconium-Based Metal Organic Frameworks for the Capture of Carbon Dioxide and Ethanol Vapour. A Comparative Study.

This paper reports on the comparison of three zirconium-based metal organic frameworks (MOFs) for the capture of carbon dioxide and ethanol vapour at ambient conditions. In terms of efficiency, two parameters were evaluated by experimental and modeling means, namely the nature of the ligands and the size of the cavities. We demonstrated that amongst three Zr-based MOFs, MIP-202 has the highest affinity for CO2 (-50 kJ·mol-1 at low coverage against around -20 kJ·mol-1 for MOF-801 and Muc Zr MOF), which could be related to the presence of amino functions borne by its aspartic acid ligands as well as the presence of extra-framework anions. On the other side, regardless of the ligand size, these three materials were able to adsorb similar amounts of carbon dioxide at 1 atm (between 2 and 2.5 µmol·m-2 at 298 K). These experimental findings were consistent with modeling studies, despite chemisorption effects, which could not be taken into consideration by classical Monte Carlo simulations. Ethanol adsorption confirmed these results, higher enthalpies being found at low coverage for the three materials because of stronger van der Waals interactions. Two distinct sorption processes were proposed in the case of MIP-202 to explain the shape of the enthalpic profiles.

Fashioning Prussian Blue Nanoparticles by Adsorption of Luminophores: Synthesis, Properties, and in Vitro Imaging.

We report the postsynthetic functionalization of Prussian blue (PB) nanoparticles by two different luminophores (2-aminoanthracene and rhodamine B). We show that the photoluminescence properties of the fluorophores are modified by a confinement effect upon adsorption and demonstrate that such multifunctional nanosized systems could be used for in vitro imaging.

Proton Conductive Zr-Phosphonate UPG-1-Aminoacid Insertion as Proton Carrier Stabilizer.

Proton exchange membrane fuel cells (PEMFCs) are an attractive green technology for energy generation. The poor stability and performances under working conditions of the current electrolytes are their major drawbacks. Metal-Organic Frameworks (MOFs) have recently emerged as an alternative to overcome these issues. Here, we propose a robust Zr-phosphonate MOF (UPG-1) bearing labile protons able to act a priori as an efficient electrolyte in PEMFCs. Further, in an attempt to further enhance the stability and conductivity of UPG-1, a proton carrier (the amino acid Lysine, Lys) was successfully encapsulated within its porosity. The behaviors of both solids as an electrolyte were investigated by a complete experimental (impedance spectroscopy, water sorption) and computational approach (MonteCarlo, water sorption). Compared with the pristine UPG-1, the newly prepared Lys@UPG-1 composite showed similar proton conductivity but a higher stability, which allows a better cyclability. This improved cyclability is mainly related to the different hydrophobic-hydrophilic balance of the Lys@UPG-1 and UPG-1 and the steric protection of the reactive sites of the MOF by the Lys.

A Switch in the Hydrophobic/Hydrophilic Gas-Adsorption Character of Prussian Blue Analogues: An Affinity Control for Smart Gas Sorption.

Porous coordination polymers are molecule-based materials presenting a high degree of tunability, which offer many advantages for targeted applications over conventional inorganic materials. This work demonstrates that the hydrophilic/hydrophobic character of Prussian blue analogues having a lipophilic feature may be tuned to optimize the gas adsorption properties. The role of the coordinatively unsaturated metal sites is emphasized through a combination of theoretical and experimental study of water, ethanol, and n-hexane adsorption.

A Critical Review of Solid Materials for Low-Temperature Thermochemical Storage of Solar Energy Based on Solid-Vapour Adsorption in View of Space Heating Uses.

The present report deals with low-temperature thermochemical storage for space heating, which is based on the principles of vapour adsorption onto solid adsorbents. With the aim of obtaining comprehensive information on the rationalized selection of adsorbents for heat storage in open sorption systems operating in the moist-air flow mode, various materials reported up to now in the literature are reviewed by referring strictly to the possible mechanisms of water vapour adsorption, as well as practical aspects of their preparation or their application under particular operating conditions. It seems reasonable to suggest that, on the basis of the current state-of-the-art, the adsorption phenomenon may be rather exploited in the auxiliary heating systems, which provide additional heat during winter's coldest days.

Structural Descriptors of Zeolitic-Imidazolate Frameworks Are Keys to the Activity of Fe-N-C Catalysts.

Active and inexpensive catalysts for oxygen reduction are crucially needed for the widespread development of polymer electrolyte fuel cells and metal-air batteries. While iron-nitrogen-carbon materials pyrolytically prepared from ZIF-8, a specific zeolitic imidazolate framework (ZIF) with sodalite topology, have shown enhanced activities toward oxygen reduction in acidic electrolyte, the rational design of sacrificial metal-organic frameworks toward this application has hitherto remained elusive. Here, we report for the first time that the oxygen reduction activity of Fe-N-C catalysts positively correlates with the cavity size and mass-specific pore volume in pristine ZIFs. The high activity of Fe-N-C materials prepared from ZIF-8 could be rationalized, and another ZIF structure leading to even higher activity was identified. In contrast, the ORR activity is mostly unaffected by the ligand chemistry in pristine ZIFs. These structure-property relationships will help identifying novel sacrificial ZIF or porous metal-organic frameworks leading to even more active Fe-N-C catalysts. The findings are of great interest for a broader application of the class of inexpensive metal-nitrogen-carbon catalysts that have shown promising activity also for the hydrogen evolution (Co-N-C) and carbon dioxide reduction (Fe-N-C and Mn-N-C).

Key study on the potential of hydrazine bisborane for solid- and liquid-state chemical hydrogen storage.

Hydrazine bisborane N2H4(BH3)2 (HBB; 16.8 wt %) recently re-emerged as a potential hydrogen storage material. However, such potential is controversial: HBB was seen as a hazardous compound up to 2010, but now it would be suitable for hydrogen storage. In this context, we focused on fundamentals of HBB because they are missing in the literature and should help to shed light on its effective potential while taking into consideration any risk. Experimental/computational methods were used to get a complete characterization data sheet, including, e.g., XRD, NMR, FTIR, Raman, TGA, and DSC. From the reported results and discussion, it is concluded that HBB has potential in the field of chemical hydrogen storage given that both thermolytic and hydrolytic dehydrogenations were analyzed. In solid-state chemical hydrogen storage, it cannot be used in the pristine state (risk of explosion during dehydrogenation) but can be used for the synthesis of derivatives with improved dehydrogenation properties. In liquid-state chemical hydrogen storage, it can be studied for room-temperature dehydrogenation, but this requires the development of an active and selective metal-based catalyst. HBB is a thus a candidate for chemical hydrogen storage.

Long-lasting insecticidal activity in plants driven by chlorogenic acid-loaded metal-organic frameworks.

Metal-organic frameworks (MOFs) possess a variety of interesting features related to their composition and structure that make them excellent candidates to be used in agriculture. However, few studies have reported their use as delivery agents of agrochemicals. In this work, the natural polyphenol chlorogenic acid (CGA) was entrapped via simple impregnation in the titanium aminoterephthalate MOF, MIL-125-NH2. A combination of experimental and computational techniques was used to understand and quantify the encapsulated CGA in MIL-125-NH2. Subsequently, CGA delivery studies were carried out in water at different pHs, showing a fast release of CGA during the first 2 h (17.3 ± 0.3% at pH = 6.5). In vivo studies were also performed against larvae of mealworm (Tenebrio molitor), evidencing the long-lasting insecticidal activity of CGA@MIL-125-NH2. This report demonstrates the potential of MOFs in the efficient release of agrochemicals, and paves the way to their study against in vivo models.

Evaluation of the Hydrophilic/Hydrophobic Balance of 13X Zeolite by Adsorption of Water, Methanol, and Cyclohexane as Pure Vapors or as Mixtures.

Adsorption isotherms of pure vapors and vapor mixtures of water, methanol, and cyclohexane were studied using a synthesized 13X zeolite (FAU topology), by means of a DVS gravimetric vapor analyzer. These results were validated by GCMC calculations. The surface chemistry of the adsorbent was characterized by the thermodesorption of ammonia, and its textural properties were studied using nitrogen physisorption. The 13X zeolite was found to be strongly acidic (BrØnsted acid sites, Si/Al = 1.3) and its specific surface area around 1100 m2·g-1. Water was found to be able to diffuse within both the supercages and the sodalite cavities of the FAU structure, whereas methanol and cyclohexane were confined in the supercages only. The water/methanol sorption selectivity of the 13X zeolite was demonstrated by co-adsorption measurements. The composition of the water/methanol adsorbed phase could be calculated by assuming IAST hypotheses. This model failed in the case of the water/cyclohexane co-adsorption system, which is in line with the non-miscibility of the components in the adsorbed state. The sorption isotherms could be successfully simulated, confirming the robustness of the forcefields used. The 13X zeolite confirmed its a priori expected hydrophilic nature, which is useful for the selective adsorption of water in a methanol-water vapor mixture.

SU-101 for the removal of pharmaceutical active compounds by the combination of adsorption/photocatalytic processes.

Pharmaceutical active compounds (PhACs) are some of the most recalcitrant water pollutants causing undesired environmental and human effects. In absence of adapted decontamination technologies, there is an urgent need to develop efficient and sustainable alternatives for water remediation. Metal-organic frameworks (MOFs) have recently emerged as promising candidates for adsorbing contaminants as well as providing photoactive sites, as they possess exceptional porosity and chemical versatility. To date, the reported studies using MOFs in water remediation have been mainly focused on the removal of a single type of PhACs and rarely on the combined elimination of PhACs mixtures. Herein, the eco-friendly bismuth-based MOF, SU-101, has been originally proposed as an efficient adsorbent-photocatalyst for the elimination of a mixture of three challenging persistent PhACs, frequently detected in wastewater and surface water in ng L-1 to mg·L-1 concentrations: the antibiotic sulfamethazine (SMT), the anti-inflammatory diclofenac (DCF), and the antihypertensive atenolol (At). Adsorption experiments of the mixture revealed that SU-101 exhibited a great adsorption capacity towards At, resulting in an almost complete removal (94.1 ± 0.8% for combined adsorption) in only 5 h. Also, SU-101 demonstrated a remarkable photocatalytic activity under visible light to simultaneously degrade DCF and SMT (99.6 ± 0.4% and 89.2 ± 1.4%, respectively). In addition, MOF-contaminant interactions, the photocatalytic mechanism and degradation pathways were investigated, also assessing the toxicity of the resulting degradation products. Even further, recycling and regeneration studies were performed, demonstrating its efficient reuse for 4 consecutive cycles without further treatment, and its subsequent successful regeneration by simply washing the material with a NaCl solution.

Influence of Water on an Epoxy/Amine-Metal Interphase: A Combined DFT and Mixing Calorimetry Approach.

Epoxy-amine systems are ubiquitous in the field of industrial thermosetting polymers, often used in a moist atmosphere. In addition, previous studies showed amine-metal interactions through the formation of an interphase, with the formation of surface complexes that may involve the formation of water molecules. However, to date, the impact of water on an epoxy/amine-metal interphase has not been specifically addressed. In this work, we examined for the first time the role of this potential fourth component by way of a dual experimental/computational approach. The effect of water on the glass-transition temperature of the obtained polymers was quantified. The in situ formation of a DETA-Al-water interphase was followed by mixing calorimetry. The DETA-water interaction was highly exothermic, and the underlying mechanism was discussed on the basis of DETA hydration, which was confirmed by density functional theory (DFT) and Monte Carlo simulations. Taking into account the pre-existing interaction between diethylenetriamine (DETA) molecules allowed us to model all experimental data. Comparison of experimental and calculated IR spectra contributed to validate the simulation parameters used. Our findings indicate that the presence of water may noticeably affect epoxy-amine-based systems. Mixing calorimetry and computational modeling appear as particularly adapted tools for the comprehension of such complex systems.

Biocompatible MgFeCO3 Layered Double Hydroxide (LDH) for Bone Regeneration-Low-Temperature Processing through Cold Sintering and Freeze-Casting.

Layered Double Hydroxides (LDHs) are inorganic compounds of relevance to various domains, where their surface reactivity and/or intercalation capacities can be advantageously exploited for the retention/release of ionic and molecular species. In this study, we have explored specifically the applicability in the field of bone regeneration of one LDH composition, denoted "MgFeCO3", of which components are already present in vivo, so as to convey a biocompatibility character. The propensity to be used as a bone substitute depends, however, on their ability to allow the fabrication of 3D constructs able to be implanted in bone sites. In this work, we display two appealing approaches for the processing of MgFeCO3 LDH particles to prepare (i) porous 3D scaffolds by freeze-casting, involving an alginate biopolymeric matrix, and (ii) pure MgFeCO3 LDH monoliths by Spark Plasma Sintering (SPS) at low temperature. We then explored the capacity of such LDH particles or monoliths to interact quantitatively with molecular moieties/drugs in view of their local release. The experimental data were complemented by computational chemistry calculations (Monte Carlo) to examine in more detail the mineral-organic interactions at play. Finally, preliminary in vitro tests on osteoblastic MG63 cells confirmed the high biocompatible character of this LDH composition. It was confirmed that (i) thermodynamically metastable LDH could be successfully consolidated into a monolith through SPS, (ii) the LDH particles could be incorporated into a polymer matrix through freeze casting, and (iii) the LDH in the consolidated monolith could incorporate and release drug molecules in a controlled manner. In other words, our results indicate that the MgFeCO3 LDH (pyroaurite structure) may be seen as a new promising compound for the setup of bone substitute biomaterials with tailorable drug delivery capacity, including for personalized medicine.