RESUMO
MgO has broad application potential in CO2 capture at intermedium temperatures. In this paper, the effects of NaNO3 doping on the properties of MgO prepared by using waste bischofite as the raw material were investigated to improve the performance of the CO2 capture. MgO-doped NaNO3 exhibited excellent CO2 capture performance at 320 °C with a maximum adsorption capacity of 36.62 wt %. MgO-doped NaNO3 has good cycling stability after 10 adsorption-desorption cycle experiments. In addition, CO2 adsorption on pure MgO and MgO-NaNO3 surfaces was investigated in accordance with density functional theory. Calculation results show that doping with NaNO3 allows more electrons to be transferred from the MgO substrate to the CO2 molecule. MgO-doped NaNO3 can lead to an increase in adsorption energy, resulting in a more stable structure after adsorption and thereby promoting adsorption. The result of this study provides an effective method for the comprehensive utilization of salt lake resources.
RESUMO
The detection of α particles is of great significance in military and civil nuclear facility management. At present, the contact method is mainly used to detect α particles, but its shortcomings limit the broad application of this method. In recent years, preliminary research on noncontact α-particle detection methods has been carried out. In this paper, the theory of noncontact α-particles detection methods is introduced and studied. We also review the direct detection and imaging methods of α particles based on the different wavelengths of fluorescence photons, and analyze the application and development of this method, providing an important reference for researchers to carry out related work.
Assuntos
Partículas alfaRESUMO
Silicate-carbonate mixtures as new CO2 capture agents have the latent application potential. CO2 sorption or desorption processes using the Na4SiO4-Na2CO3 mixture sorbent in air were analyzed by in situ Raman spectroscopy and X-ray diffraction from 25 °C to 900 °C. The results show that the Na4SiO4-Na2CO3 mixture sorbent could continuously absorb and strip CO2 by thermal swinging. The CO2 sorption was produced via a two-step process depending on the temperature range. Initially, CO2 dissolved in carbonate to produce pyrocarbonate (C2O52-) ions, which subsequently reacted with SiO44- anion to produce the polymer silicates and CO32- anion. The C2O52- anion on the surface of the silicates promoted CO2 transformation to CO32- anion through the reaction with SiO44- anions. The CO32- anion decomposed the polymer silicates to produce orthosilicates and CO2 gas again at high temperature. By this circulation, CO2 could dissolve in carbonate more easily and be absorbed and stripped continuously by thermal swinging in the mixture sorbent than the pure carbonate. The processes of recovering heat and separating CO2 from flue gas simultaneously without decreasing the temperature is an economical and attractive method for energy conservation. It offers the theoretical basis for developing new heat-storage and CO2-capture technology.
RESUMO
OBJECTIVE: To evaluate the effects of dietary Ca intake and Ca supplementation during pregnancy on low birth weight (LBW) and small for gestational age (SGA) infants. DESIGN: A birth cohort study was conducted in 2010-2012 at the Gansu Provincial Maternity and Child Care Hospital in Lanzhou, China. SETTING: A birth cohort study. PARTICIPANTS: Totally, 9595 pregnant women who came to the hospital for delivery at 20 weeks of gestation or more, and who were 18 years of age or older. RESULTS: Compared with non-users, Ca supplement users had a reduced risk of LBW infants (OR = 0·77, 95 % CI: 0·63, 0·95) and a reduced risk of nulliparous women giving birth to LBW infants (OR = 0·75, 95 % CI: 0·58, 0·98) (P < 0·05). More specifically, both the use of Ca supplement before conception and during pregnancy (OR = 0·44, 95 % CI: 0·19, 0·99) and during pregnancy only (OR = 0·80, 95 % CI: 0·65, 0·99) had the main effect of reducing risk of nulliparous women giving birth to LBW infants (P < 0·05). There was no association between Ca supplementation and SGA (OR = 0·87, 95 % CI: 0·75, 1·01) (P > 0·05). However, higher dietary Ca intake during pregnancy decreases the risk of both LBW (quartile 2: OR = 0·72, 95 % CI: 0·55, 0·94; quartile 3: OR = 0·68, 95 % CI: 0·50, 0·62) and SGA infants (quartile 2: OR = 0·77, 95 % CI: 0·63, 0·95; quartile 3: OR = 0·71, 95 % CI: 0·57, 0·88, quartile 4: OR = 0·71, 95 % CI: 0·57, 0·88) (P < 0·05). CONCLUSIONS: Ca supplementation and adequate dietary intake of Ca during pregnancy are associated with a decreased risk of LBW infants born to nulliparous women.
RESUMO
BACKGROUND: To evaluate the independent and joint effects of maternal pre-pregnancy BMI and gestational weight gain (GWG) on the risk of preeclampsia and its subtypes. METHODS: A birth cohort study was conducted from 2010 to 2012 in Lanzhou, China. Three hundred fourty seven pregnant women with preeclampsia and 9516 normotensive women at Gansu Provincial Maternity and Child Care Hospital were included in the present study. Unconditional logistic regression models were used to evaluate the associations between pre-pregnancy BMI, GWG, and risk of preeclampsia and its subtypes. RESULTS: Compared to women with normal pre-pregnancy BMI, those who were overweight/obese had an increased risk of preeclampsia (OR = 1.81; 95%CI: 1.37-2.39). Women with excessive GWG had an increased risk of preeclampsia (OR = 2.28; 95%CI: 1.70-3.05) compared to women with adequate GWG. The observed increased risk was similar for mild-, severe- and late-onset preeclampsia. No association was found for early-onset preeclampsia. Overweight/obese women with excessive GWG had the highest risk of developing preeclampsia compared to normal weight women with no excessive weight gain (OR = 3.78; 95%CI: 2.65-5.41). CONCLUSIONS: Our results suggested that pre-pregnancy BMI and GWG are independent risk factors for preeclampsia and that the risk might vary by preeclampsia subtypes. Our study also proposed a potential synergistic effect of pre-pregnancy BMI and GWG that warrants further investigation.
Assuntos
Índice de Massa Corporal , Obesidade/complicações , Sobrepeso/complicações , Pré-Eclâmpsia/etiologia , Aumento de Peso , Adulto , China , Estudos de Coortes , Feminino , Humanos , Modelos Logísticos , Obesidade/fisiopatologia , Sobrepeso/fisiopatologia , Gravidez , Fatores de RiscoRESUMO
The thermal physical properties of Li2CO3-Na2CO3-K2CO3 eutectic molten salt were comprehensively investigated. It was found that the liquid salt can remain stable up to 658 °C (the onset temperature of decomposition) by thermal analysis, and so the investigations on its thermal physical parameters were undertaken from room temperature to 658 °C. The density was determined using a self-developed device, with an uncertainty of ±0.00712 g cm(-3). A cooling curve was obtained from the instrument, giving the liquidus temperature. For the first time, we report the obtainment of the thermal diffusivity using a laser flash method based on a special crucible design and establishment of a specific sample preparation method. Furthermore, the specific heat capacity was also obtained by use of DSC, and combined with thermal diffusivity and density, was used to calculate the thermal conductivity. We additionally built a rotating viscometer with high precision in order to determine the molten salt viscosity. All of these parameters play an important part in the energy storage and transfer calculation and safety evaluation for a system.
RESUMO
Room-temperature ionic liquids (ILs) are generally considered as structurally heterogeneous with inherent polar/apolar phase separation. However, even after a decade of research, local dynamics in the heterogeneous structures of ILs remain neglected. Such local dynamics may influence the ion transport of electrolytes, as well as the reaction rate of solvents. In this study, we performed molecular dynamics simulation to analyze the local dynamics for the structural heterogeneity of ILs. Calculations of the diffusion, reorientation, and association dynamics showed a distinct heterogeneous dynamics between the polar and apolar regions of ILs. Further studies demonstrated that such local dynamic differences originate from local structural heterogeneity. Different energy barriers determine a predominant fast reorientation dynamics in apolar regions and a locally vibrating behavior in polar regions. Additionally, we suggested a new jumping mechanism to clarify the dynamic heterogeneity of ions in the polar regions. The results will help determine the origin of the heterogeneous dynamics in IL local structures and provide a theoretical basis for tuning the dynamic properties of ILs used as electrolytes or reaction solvents.
RESUMO
PURPOSE: Folic acid supplementation has been suggested to reduce the risk of preterm birth. However, results from previous epidemiologic studies have been inconclusive. We investigated the hypothesis that folic acid supplementation and dietary folate intake during pre- and post-conception reduces the risk of preterm birth. METHODS: We analyzed data from a birth cohort study conducted between 2010 and 2012 in Lanzhou, China, including 10,179 pregnant women with live singleton births. RESULTS: Compared to non-users, folic acid supplement users with >12-week duration had a reduced risk of preterm birth (OR 0.67, 95 % CI 0.55-0.83) with a significant dose-response relationship (P for trend = 0.01). A similar pattern was observed for spontaneous preterm birth. Stronger associations were seen for ever use of folic acid supplement and very preterm birth (OR 0.50, 95 % CI 0.36-0.69) and spontaneous very preterm birth (OR 0.42, 95 % CI 0.29-0.63). Dietary folate intake during preconception and pregnancy were also associated with reduced risk of preterm birth (OR 0.68, 95 % CI 0.56-0.83, OR 0.57, 95 % CI 0.47-0.70 for the highest quartiles, respectively), particularly for spontaneous very preterm (OR 0.41, 95 % CI 0.24-0.72, OR 0.26, 95 % CI 0.15-0.47 for the highest quartiles, respectively). There were also decreased risks of preterm birth observed per 10-µg increase in dietary folate intake, and similar associations were found after stratification by folic acid supplementation status. CONCLUSIONS: Our results suggest that folic acid supplementation and higher dietary folate intake during preconception and pregnancy reduces the risk of preterm birth, and the protective effect varies by preterm subtypes.
Assuntos
Dieta , Suplementos Nutricionais , Ácido Fólico/administração & dosagem , Nascimento Prematuro/prevenção & controle , Adulto , Índice de Massa Corporal , China , Estudos de Coortes , Relação Dose-Resposta a Droga , Exercício Físico , Feminino , Humanos , Fenômenos Fisiológicos da Nutrição Materna , Gravidez , Fatores de Risco , Fatores Socioeconômicos , Adulto JovemRESUMO
BACKGROUND: Early studies have suggested that biomass cooking fuels were associated with increased risk of low birth weight (LBW). However it is unclear if this reduced birth weight was due to prematurity or intrauterine growth restriction (IUGR). METHODS: In order to understand the relationship between various cooking fuels and risk of LBW and small for gestational age (SGA), we analyzed data from a birth cohort study conducted in Lanzhou, China which included 9,895 singleton live births. RESULTS: Compared to mothers using gas as cooking fuel, significant reductions in birth weight were observed for mothers using coal (weight difference = 73.31 g, 95 % CI: 26.86, 119.77) and biomass (weight difference = 87.84 g, 95 % CI: 10.76, 164.46). Using biomass as cooking fuel was associated with more than two-fold increased risk of LBW (OR = 2.51, 95 % CI: 1.26, 5.01), and the risk was mainly seen among preterm births (OR = 3.43, 95 % CI: 1.21, 9.74). No significant associations with LBW were observed among mothers using coal or electromagnetic stoves for cooking. CONCLUSIONS: These findings suggest that exposure to biomass during pregnancy is associated with risk of LBW, and the effect of biomass on LBW may be primarily due to prematurity rather than IUGR.
Assuntos
Peso ao Nascer , Carvão Mineral/estatística & dados numéricos , Culinária/estatística & dados numéricos , Recém-Nascido de Baixo Peso , Nascimento Prematuro/epidemiologia , Efeitos Tardios da Exposição Pré-Natal/epidemiologia , Adulto , Biomassa , China/epidemiologia , Carvão Mineral/efeitos adversos , Estudos de Coortes , Radiação Eletromagnética , Feminino , Retardo do Crescimento Fetal/epidemiologia , Humanos , Recém-Nascido , Recém-Nascido Prematuro , Masculino , Gás Natural/estatística & dados numéricos , Gravidez , Adulto JovemRESUMO
Studies investigating the relationship between maternal passive smoking and the risk of preterm birth have reached inconsistent conclusions. A birth cohort study that included 10,095 nonsmoking women who delivered a singleton live birth was carried out in Lanzhou, China, between 2010 and 2012. Exposure to passive smoking during pregnancy was associated with an increased risk of very preterm birth (<32 completed weeks of gestation; odds ratio = 1.98, 95% confidence interval: 1.41, 2.76) but not moderate preterm birth (32-36 completed weeks of gestation; odds ratio = 0.98, 95% confidence interval: 0.81, 1.19). Risk of very preterm birth increased with the duration of exposure (P for trend = 0.0014). There was no variability in exposures by trimester. The associations were consistent for both medically indicated and spontaneous preterm births. Overall, our findings support a positive association between passive smoking and the risk of very preterm birth.
Assuntos
Nascimento Prematuro/etiologia , Poluição por Fumaça de Tabaco/efeitos adversos , Adolescente , Adulto , China/epidemiologia , Escolaridade , Feminino , Idade Gestacional , Humanos , Recém-Nascido , Masculino , Idade Materna , Paridade , Gravidez , Nascimento Prematuro/epidemiologia , Fatores de Risco , Inquéritos e Questionários , Poluição por Fumaça de Tabaco/estatística & dados numéricos , População Urbana/estatística & dados numéricos , Adulto JovemRESUMO
A series of chiral 6-membered ring N-heterocyclic carbene (NHC) precursors based on 3,4-dihydro-quinazoline were synthesized with overall yields of 54-62%. NHCs generated from these precursors show excellent asymmetric catalytic properties for borylation of α,ß-unsaturated esters with enantioselectivity of up to 93% with a catalyst content of only 1 mol%.
RESUMO
Hydrogels have shown great potential for application in food science due to their diverse functionalities. However, most hydrogels inevitably contain toxic chemical cross-linking agent residues, posing serious food safety concerns. In this paper, a curcumin/sodium alginate/carboxymethyl chitosan hydrogels (CSCH) were prepared by self-assembly of two oppositely charged polysaccharides, carboxymethyl chitosan and sodium alginate, to form a three-dimensional network encapsulating curcumin for extending food shelf life. The network structure of the CSCH film confirmed by FTIR, XRD, and XPS was mainly formed by electrostatic interactions. The chemical stability of CSCH network encapsulated curcumin was 4.2 times greater than that of free curcumin, with excellent gas barrier, antimicrobial, antioxidant, and biosafety properties. It was found that CSCH films reduced dehydration, prevented nutrient loss, inhibited microbial growth, and lowered the respiration rate, which effectively maintained the quality of mango and prolonged its shelf-life up to 11 days. Notably, CSCH films possessed the properties of rapid recycling (10 mins) and biodegradability (53 days). This polysaccharide-based hydrogel film provides a viable strategy for the development of green and sustainable food packaging.
Assuntos
Quitosana , Curcumina , Curcumina/química , Curcumina/farmacologia , Curcumina/análogos & derivados , Quitosana/química , Quitosana/análogos & derivados , Hidrogéis/química , Alginatos/química , Antioxidantes/química , Antioxidantes/farmacologia , Polieletrólitos/química , Embalagem de Alimentos/métodos , Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , MetilgalactosídeosRESUMO
Molten MgCl2-based chlorides have emerged as potential thermal storage and heat transfer materials due to high thermal stabilities and lower costs. In this work, deep potential molecular dynamics (DPMD) simulations by a method combination of the first principle, classical molecular dynamics, and machine learning are performed to systemically study the relationships of structures and thermophysical properties of molten MgCl2-NaCl (MN) and MgCl2-KCl (MK) eutectic salts at the temperature range of 800-1000 K. The densities, radial distribution functions, coordination numbers, potential mean forces, specific heat capacities, viscosities, and thermal conductivities of these two chlorides are successfully reproduced under extended temperatures by DPMD with a larger size (5.2 nm) and longer timescale (5 ns). It is concluded that the higher specific heat capacity of molten MK is originated from the strong potential mean force of Mg-Cl bonds, whereas the molten MN performs better in heat transfer due to the larger thermal conductivity and lower viscosity, attributed to the weak interaction between Mg and Cl ions. Innovatively, the plausibility and reliability of microscopic structures and macroscopic properties for molten MN and MK verify the extensibilities of these two deep potentials in temperatures, and these DPMD results also provide detailed technical parameters to the simulations of other formulated MN and MK salts.
RESUMO
Strawberry is a seasonal and regional fruit. Thus, strawberry waste caused by spoilage and decay is an urgent problem that must be solved. Developing hydrogel films (HGF) for multifunctional food packaging can effectively slow down strawberry. Based on the carboxymethyl chitosan/sodium alginate/citric acid with excellent biocompatibility, preservation effect, and ultrafast (10 s) coating on the strawberry surface, HGF specimens were designed and prepared through the electrostatic interaction of opposite charges between polysaccharides. The prepared HGF specimen exhibited excellent low moisture permeability and antibacterial properties. Its lethality rates against both Escherichia coli and Staphylococcus aureus were more than >99 %. The HGF could keep strawberries fresh for up to 8, 19, and 48 days at 25.0, 5.0, and 0 °C, respectively, by delaying the fruits' ripening, dehydration, microbial invasion, and respiration rate. The HGF dissolved and regenerated five times still exhibited good performance. The water vapor transmission rate of the regenerative HGF could reach 98 % of that of the original HGF. The regenerative HGF could maintain the freshness of strawberries for up to 8 days at 25.0 °C. This study provides new insight into an alternative film design for convenient, green, and renewable alternative films to delay perishable fruit spoilage.
Assuntos
Quitosana , Fragaria , Alginatos/farmacologia , Quitosana/farmacologia , Reprodutibilidade dos Testes , Embalagem de Alimentos , Antibacterianos/farmacologia , Conservação de AlimentosRESUMO
The corrosion resistance of 316 stainless steel (316SS) in molten KCl-MgCl2 salts was studied through static immersion corrosion at high temperatures. Below 600 °C, the corrosion rate of 316SS increased slowly with increasing temperature. When the salt temperature rises to 700 °C, the corrosion rate of 316SS increases dramatically. The corrosion of 316SS is mainly due to the selective dissolution of Cr and Fe at high temperatures. The impurities in molten KCl-MgCl2 salts could accelerate the dissolution of Cr and Fe atoms in the grain boundary of 316SS, and purification treatment can reduce the corrosivity of KCl-MgCl2 salts. Under the experimental conditions, the diffusion rate of Cr/Fe in 316SS changed more with temperature than the reaction rate of salt impurities with Cr/Fe.
RESUMO
Waterproof breathable functional membranes have broad application prospects in the field of outdoors textiles. The fluorine-containing microporous membranes of the mainstream functional products easily cause harm to the environment, and thus, the fluorine-free environmental nanofibrous membranes are an important development direction for functional membranes. In this subject, the electrospun polyacrylonitrile nanofibrous membranes were first hydrophobically modified by amino functional modified polysiloxane (AMP), followed by in situ cross-linking modified with 4, 4'-methyl diphenylene diisocyanate (MDI). The fluorine-free modification by AMP altered the surface of the membranes from hydrophilic to hydrophobic, and greatly improved the waterproof properties with the hydrostatic pressure reaching to 87.6 kPa. In addition, the formation of bonding points and the in situ preparation of polyuria through the reaction between the isocyanate in MDI and the amino group in AMP, could improve the mechanical properties effectively. When using AMP with the concentration of 1 wt% and MDI with the concentration of 2 wt%, the relatively good comprehensive performance was obtained with good water resistance (93.8 kPa), modest vapor permeability (4.7 kg m-2 d-1) and air permeability (12.7 mm/s). Based on these testing data, the modified nanofibrous membranes had excellent waterproof and breathable properties, which has future potential in outdoor sports apparel.
RESUMO
Corrosion behavior of 304 stainless steel in molten NaNO3-NaCl-NaF salt and NaNO3-NaCl-NaF vapor has been studied at 450 °C. The results showed that the samples suffered weight loss, and surface oxides, i.e. Fe2O3 and FeCr2O4 characterized by XRD, were formed after corrosion. The surface oxide layer was about 1.1 µm in thickness after corrosion in molten NaNO3-NaCl-NaF salt, which was relatively homogeneous and dense. Whereas, the distribution of surface oxides was not even, and a shedding phenomenon was observed after corrosion molten NaNO3-NaCl-NaF vapor. This is mainly attributed to the existence of NO2 and NO in the molten NaNO3-NaCl-NaF vapor determined by thermogravimetric infrared spectroscopy, which affected the adherence between oxides and the matrix. Additionally, the corrosion rate of 304 stainless steel in molten NaNO3-NaCl-NaF salt is almost close to that in solar salt, which demonstrates that the synergy influence of Cl- and F- on the rate of 304 stainless steel is not significant. This work not only enriches the database of molten salt corrosion, but provides references for the selection of alloy and molten salt in the CSP.
RESUMO
The lack of suitable cathode materials with a high capacity and good stability is a crucial problem affecting the development of aqueous Zn-ion batteries. Herein, a novel strategy for the modification of V2CTx through molten salt thermal treatment is proposed. In the novel route, S heteroatoms were introduced into V2CTx through a substitution reaction during the dissolution of Li2S in LiCl-KCl molten salts. Then, surface V2O5 was obtained through the in situ electrochemical charging/discharging of the S-doped V2CTx (MS-S-V2CTx) cathode. The assembled Zn/MS-S-V2CTx battery showed a high reversible discharge capacity of 411.3 mAh g-1 at a current density of 0.5 A g-1, an 80% capacitance retention after long cycle stability tests at 10 A g-1 for 3000 cycles, and a high energy density of 375.5 Wh kg-1 in 2M ZnSO4. Density functional theory calculations demonstrate that the improved electrochemical performance of the cathode can be attributed to the introduced S heteroatoms, which considerably reduced the ion diffusion energy barrier for Zn2+ ions and improved the stability of V2O5. This work provides a novel method to produce highly active and stable vanadium-based cathodes for aqueous Zn-ion batteries.
RESUMO
The corrosion of 316SS in contact with lead complicates the realization of high coolant temperature. To explore the corrosion behavior at high temperature, the corrosion test of 316SS was performed in liquid lead at a high temperature of 650 °C under Ar with oxygen levels of 10-2 wt% and 10-5 wt% by the static corrosion method. The mass changes after corrosion were determined; then, the corrosion depth and the oxide product formed were further characterized. A multi-oxide layer was formed on the 316SS alloy surface, and the thickness reached 17.5 µm over a period of 100 h at the oxygen level of â¼10-2 wt%. Fe oxide was the main product in the outer layer; the dense Fe-Cr oxide was formed in the inner layer and lead was isolated from the metal substrate. When the oxygen content was 10-5 wt%, corrosion by dissolution at a rather high rate was dominant, and the corrosion depth was as high as 50 µm for 100 h. It is speculated that the oxide layer is also formed at the initial stage but gets dissociated when there is no oxygen supply to sustain the oxide layer with prolonged exposure time. The oxygen content in the cover gas greatly influences the corrosion behavior of 316SS, thus directly affecting the application of 316SS immersed in liquid lead at high temperature.
RESUMO
This study prepared 4,4-diaminodiphenylmethane (DDM)-functionalized graphene oxide (GO)@silica dioxide (SiO2) nano-composites through amidation reaction and low-temperature precipitation. The resulting modified GO, that was DDM-GO@SiO2. The study found that DDM-GO@SiO2 showed good dispersion and compatibility with thermoplastic polyurethane (TPU) substrates. Compared with pure TPU, the tensile strength of the TPU composites increased by 41% to 94.6 MPa at only 0.5 wt% DDM-GO@SiO2. In addition, even when a small amount of DDM-GO@SiO2 was added, the UV absorption of TPU composites increased significantly, TPU composites can achieve a UV shielding efficiency of 95.21% in the UV-A region. These results show that this type of material holds great promise for the preparation of functional coatings and film materials with high strength and weather resistance.