Emotional face recognition in male adolescents with autism spectrum disorder or disruptive behavior disorder: an eye-tracking study.

Autism Spectrum Disorder (ASD), Oppositional Defiant Disorder (ODD), and Conduct Disorder (CD) are often associated with emotion recognition difficulties. This is the first eye-tracking study to examine emotional face recognition (i.e., gazing behavior) in a direct comparison of male adolescents with Autism Spectrum Disorder or Oppositional Defiant Disorder/Conduct Disorder, and typically developing (TD) individuals. We also investigate the role of psychopathic traits, callous-unemotional (CU) traits, and subtypes of aggressive behavior in emotional face recognition. A total of 122 male adolescents (N = 50 ASD, N = 44 ODD/CD, and N = 28 TD) aged 12-19 years (M = 15.4 years, SD= 1.9) were included in the current study for the eye-tracking experiment. Participants were presented with neutral and emotional faces using a Tobii 1750 eye-tracking monitor to record gaze behavior. Our main dependent eye-tracking variables were: (1) fixation duration to the eyes of a face and (2) time to the first fixation to the eyes. Since distributions of eye-tracking variables were not completely Gaussian, non-parametric tests were chosen to investigate gaze behavior across the diagnostic groups with Autism Spectrum Disorder, Oppositional Defiant Disorder/Conduct Disorder, and Typically Developing individuals. Furthermore, we used Spearman correlations to investigate the links with psychopathy, callous, and unemotional traits and subtypes of aggression as assessed by questionnaires. The relative total fixation duration to the eyes was decreased in both the Autism Spectrum Disorder group and the Oppositional Defiant Disorder/Conduct Disorder group for several emotional expressions. In both the Autism Spectrum Disorder and the Oppositional Defiant Disorder/Conduct Disorder group, increased time to first fixation on the eyes of fearful faces only was nominally significant. The time to first fixation on the eyes was nominally correlated with psychopathic traits and proactive aggression. The current findings do not support strong claims for differential cross-disorder eye-gazing deficits and for a role of shared underlying psychopathic traits, callous-unemotional traits, and aggression subtypes. Our data provide valuable and novel insights into gaze timing distributions when looking at the eyes of a fearful face.

Parallel updating and weighting of multiple spatial maps for visual stability during whole body motion.

It is known that the brain uses multiple reference frames to code spatial information, including eye-centered and body-centered frames. When we move our body in space, these internal representations are no longer in register with external space, unless they are actively updated. Whether the brain updates multiple spatial representations in parallel, or whether it restricts its updating mechanisms to a single reference frame from which other representations are constructed, remains an open question. We developed an optimal integration model to simulate the updating of visual space across body motion in multiple or single reference frames. To test this model, we designed an experiment in which participants had to remember the location of a briefly presented target while being translated sideways. The behavioral responses were in agreement with a model that uses a combination of eye- and body-centered representations, weighted according to the reliability in which the target location is stored and updated in each reference frame. Our findings suggest that the brain simultaneously updates multiple spatial representations across body motion. Because both representations are kept in sync, they can be optimally combined to provide a more precise estimate of visual locations in space than based on single-frame updating mechanisms.

Gaze is driven by an internal goal trajectory in a visuomotor task.

When we make hand movements to visual targets, gaze usually leads hand position by a series of saccades to task-relevant locations. Recent research suggests that the slow smooth pursuit eye movement system may interact with the saccadic system in complex tasks, suggesting that the smooth pursuit system can receive non-retinal input. We hypothesise that a combination of saccades and smooth pursuit guides the hand movements towards a goal in a complex environment, using an internal representation of future trajectories as input to the visuomotor system. This would imply that smooth pursuit leads hand position, which is remarkable, as the general idea is that smooth pursuit is driven by retinal slip. To test this hypothesis, we designed a video-game task in which human subjects used their thumbs to move two cursors to a common goal position while avoiding stationary obstacles. We found that gaze led the cursors by a series of saccades interleaved with ocular fixation or pursuit. Smooth pursuit was correlated with neither cursor position nor cursor velocity. We conclude that a combination of fast and slow eye movements, driven by an internal goal instead of a retinal goal, led the cursor movements, and that both saccades and pursuit are driven by an internal representation of future trajectories of the hand. The lead distance of gaze relative to the hand may reflect a compromise between exploring future hand (cursor) paths and verifying that the cursors move along the desired paths.

A practical approach for exploration and modeling of the design space of a bacterial vaccine cultivation process.

A licensed pharmaceutical process is required to be executed within the validated ranges throughout the lifetime of product manufacturing. Changes to the process, especially for processes involving biological products, usually require the manufacturer to demonstrate that the safety and efficacy of the product remains unchanged by new or additional clinical testing. Recent changes in the regulations for pharmaceutical processing allow broader ranges of process settings to be submitted for regulatory approval, the so-called process design space, which means that a manufacturer can optimize his process within the submitted ranges after the product has entered the market, which allows flexible processes. In this article, the applicability of this concept of the process design space is investigated for the cultivation process step for a vaccine against whooping cough disease. An experimental design (DoE) is applied to investigate the ranges of critical process parameters that still result in a product that meets specifications. The on-line process data, including near infrared spectroscopy, are used to build a descriptive model of the processes used in the experimental design. Finally, the data of all processes are integrated in a multivariate batch monitoring model that represents the investigated process design space. This article demonstrates how the general principles of PAT and process design space can be applied for an undefined biological product such as a whole cell vaccine. The approach chosen for model development described here, allows on line monitoring and control of cultivation batches in order to assure in real time that a process is running within the process design space.

Web-based education in bioprocess engineering.

The combination of web technology, knowledge of bioprocess engineering, and theories on learning and instruction might yield innovative learning material for bioprocess engineering. In this article, an overview of the characteristics of web-based learning material is given, as well as guidelines for the design of learning material from theories of learning and instruction and from the bioprocess engineering domain. A diverse body of learning material is presented, which illustrates the application of these guidelines; this material has been developed during the past six years for different courses, mostly at undergraduate level, and it illustrates how web-based learning material can enable various different approaches to learning objectives that might improve overall learning. Such learning material has been used for several years in education, it has been evaluated with positive results, and is now part of the regular learning material for bioprocess engineering at Wageningen University.

Insect cells for human food.

There is a need for novel protein sources. Insects are a possible interesting source of protein. They are nutritious in terms of protein (40-75 g/100g dry weight) and minerals. Insect protein is of high quality and has a high digestibility (77-98%) and concentration of essential amino acids (46-96% of the nutritional profile). Also insect cells may be a promising novel source of protein. Choice of cell line, growth conditions and use of the baculovirus expression system opens up possibilities to engineer the nutritional value of the biomass. The technological limits as well as consumer acceptance of insect cell based food remains to be investigated.

Biocatalysts: measurement, modelling and design of heterogeneity.

Multiple phenomena are involved in conversions by immobilized biocatalysts. A paradox is identified between analytical desires on one hand and analytical boundary conditions on the other: while the study of interdependent phenomena would call for their simultaneous analysis in an integrated context, the available experimental options may impose a series of separate and dedicated analyses. From this analysis, bottlenecks in particle performance may be identified, if possible supported by a mechanistic model and performance criteria. Subsequently, a strategy for further biocatalyst development may be chosen. Finally, possibilities for future improvement of biocatalysts are discussed for various fields of research. Some examples of recent developments in enzyme and matrix characteristics, reactor operation, and micro-technology are discussed.

The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage.

A highly interconnecting and accessible pore network has been suggested as one of a number of prerequisites in the design of scaffolds for tissue engineering. In the present study, two processing techniques, compression-molding/particulate-leaching (CM), and 3D fiber deposition (3DF), were used to develop porous scaffolds from biodegradable poly(ethylene glycol)-terephthalate/poly(butylene terephthalate) (PEGT/PBT) co-polymers with varying pore architectures. Three-dimensional micro-computed tomography (microCT) was used to characterize scaffold architectures and scaffolds were seeded with articular chondrocytes to evaluate tissue formation. Scaffold porosity ranged between 75% and 80%. Average pore size of tortuous CM scaffolds (182 microm) was lower than those of organized 3DF scaffolds (525 microm). The weight ratio of glycosaminoglycans (GAG)/DNA, as a measure of cartilage-like tissue formation, did not change after 14 days of culture whereas, following subcutaneous implantation, GAG/DNA increased significantly and was significantly higher in 3DF constructs than in CM constructs, whilst collagen type II was present within both constructs. In conclusion, 3DF PEGT/PBT scaffolds create an environment in vivo that enhances cartilaginous matrix deposition and hold particular promise for treatment of articular cartilage defects.

Enzyme distribution and matrix characteristics in biocatalytic particles.

In a study of Assemblase, an industrial immobilized penicillin-G acylase, various electron microscopic techniques were used to relate intra-particle enzyme heterogeneity with the morphological heterogeneity of the support material at various levels of detail. Transmission electron microscopy was used for the study of intra-particle penicillin-G acylase distribution in Assemblase particles of various sizes; it revealed an abrupt increase in enzyme loading at the particle surface (1.4-fold) and in the areas (designated halo's) surrounding internal macro-voids (7.7-fold). Cryogenic field-emission scanning electron microscopy related these abrupt local enzyme heterogeneities to local heterogeneity of the support material by revealing the presence of dense top layers surrounding both the particle exterior and the internal macro-voids. Furthermore, it showed a very distinct morphological appearance of the halo. Most probably, all these regions contained relatively more chitosan than gelatin (the polymers Assemblase was constructed of), which suggested local polymer demixing during particle production. A basic thermodynamic line of reasoning suggested that a difference in hydrophilicity between the two polymers induced local demixing. In the future, thermodynamic knowledge on such polymer interactions resulting in matrix heterogeneity may be used as a tool for biocatalyst design.

Field-emission scanning electron microscopy analysis of morphology and enzyme distribution within an industrial biocatalytic particle.

Field-emission scanning electron microscopy (FESEM) was used in a technical feasibility study to obtain insight into the internal morphology and the intraparticle enzyme distribution of Assemblase, an industrial biocatalytic particle containing immobilized penicillin-G acylase. The results were compared with previous studies based on light and transmission electron microscopic techniques. The integrated FESEM approach yielded the same quantitative results as the microscopic techniques used previously. Given this technical equivalence, the integrated approach offers several advantages. First, the single preparation method and detection system avoids interpretation discrepancies between corresponding areas that were examined for different properties with different detection techniques in different samples. Second, the specimen size suitable for whole particle study is virtually unlimited, which simplifies sectioning and puts less stringent demands on the embedding technique. Furthermore, the sensitivity toward enzyme presence and distribution increases because the epitopes inside thick sections become available for labeling. Quick and unambiguous analysis of the relation between particle morphology and enzyme distribution is important because this information may be used in the future for the design of enzyme distributions in which the particle morphology can be used as a control parameter.

Shear sensitivity of animal cells from a culture-medium perspective.

Recently, several groups have published data on the shear sensitivity of suspended animal cells and the protective effect of certain polymers. These findings did not, at the time, seem to have great practical application because shear sensitivity did not cause great problems for large-scale applications in sparged and stirred-tank reactors using the then-current culture media and fermentation procedures. However, two recent developments might require renewed attention in sparged animal-cell cultures--protein-free media and new fermentation techniques.

Defined media and inert supports: their potential as solid-state fermentation production systems.

Solid-state fermentation (SSF) using inert supports impregnated with chemically defined liquid media has several potential applications in both scientific studies and in the industrial production of high-value products, such as metabolites, biological control agents and enzymes. As a result of its more defined system, SSF on inert supports offers numerous advantages, such as improved process control and monitoring, and enhanced process consistency, compared with cultivation on natural solid substrates.

Automation of selective assays for on-line bioprocess monitoring by flow-injection analysis.

On-line analysis of one component in a complex media used for bioprocesses requires the application of selective tests such as enzymes assays. Because these assays are susceptible to interference by other medium components and have a limited detection range, automatic sample pretreatment is a prerequisite. The progress made with automatic sample pretreatment in flow-injection analysis makes this technique particularly suitable for on-line monitoring of bioprocesses. Moreover, newly developed software control systems may improve the necessary robustness of flow-infection analysis systems.

The effect of PEGT/PBT scaffold architecture on oxygen gradients in tissue engineered cartilaginous constructs.

Repair of articular cartilage defects using tissue engineered constructs composed of a scaffold and cultured autologous cells holds promise for future treatments. However, nutrient limitation (e.g. oxygen) has been suggested as a cause of the onset of chondrogenesis solely within the peripheral boundaries of larger constructs. In the present study, oxygen gradients were evaluated by microelectrode measurements in two porous polyethylene glycol terephthalate/polybutylene terephthalate (PEGT/PBT) scaffold architectures, a compression-molded and particle-leached sponge (CM) and a 3D-deposited fiber (3DF) scaffold. During the first 14 days in vitro, gradients intensified, after which a gradual decrease of the gradients was observed in vitro. In vivo, however, gradients changed instantly and became less pronounced. Although similar gradients were observed regardless of scaffold type, significantly more cells were present in the center of 3DF constructs after 2 weeks of in vivo culture. Our results stress the importance of a rationally designed scaffold for tissue-engineering applications. Organized structures, such as the 3DF PEGT/PBT polymer scaffolds, offer possibilities for regulation of nutrient supply and, therefore, hold promise for clinical approaches for cartilage repair.

Expansion of bovine chondrocytes on microcarriers enhances redifferentiation.

Functional cartilage implants for orthopedic surgery or in vitro tissue evaluation can be created from expanded chondrocytes and biodegradable scaffolds. Expansion of chondrocytes in two-dimensional culture systems results in their dedifferentiation. The hallmark of this process is the switch of collagen synthesis from type II to type I. The aim of this study was to evaluate the postexpansion chondrogenic potential of microcarrier-expanded bovine articular chondrocytes in pellet cultures. A selection of microcarriers was screened for initial attachment of chondrocytes. On the basis of those results and additional selection criteria related to clinical application, Cytodex-1 microcarriers were selected for further investigation. Comparable doubling times were obtained in T-flask and microcarrier cultures. During propagation on Cytodex-1 microcarriers, cells acquired a spherical-like morphology and the presence of collagen type II was detected. Both observations are indicative of a differentiated chondrocyte. Pellet cultures of microcarrier-expanded cells showed cartilage-like morphology and staining for proteoglycans and collagen type II after 14 days. In contrast, pellets of T-flask-expanded cells had a fibrous appearance and showed abundant staining only for collagen type I. Therefore, culture of chondrocytes on microcarriers may offer useful and cost-effective cell expansion opportunities in the field of cartilage tissue engineering.

Effect of oxygen tension on adult articular chondrocytes in microcarrier bioreactor culture.

Tissue-engineering approaches for cartilage repair hold promise for the treatment of cartilage defects. Various methods to prevent or reduce dedifferentiation during chondrocyte expansion are currently under investigation. In the present study we evaluated the effect of oxygen on chondrocyte proliferation, as oxygen has received increased attention as a possible regulator of chondrocyte differentiation and its effect during expansion is uncertain. Therefore, the effect of three oxygen tensions (4, 10.5, and 21%) was investigated in a bioreactor microcarrier culture, which allows precise control of the oxygen tension in the liquid phase. During culture cells acquired a round shape on microcarriers. No differences in proliferation rate of chondrocytes were observed within the range of oxygen tensions evaluated. Cells exhibited predominantly anaerobic metabolism and, per mole of glucose, approximately 2 mol of lactate was produced independent of oxygen tension. Cellular oxygen consumption was comparable for all bioreactor cultures. Nevertheless, specific consumption rates were relatively high (2-4 x 10(-17) mol. cell(-1). s(-1)), in comparison with chondrocytes in cartilage (0.8-2.2 x 10(-18) mol. cell(-1)). Subsequent cartilaginous tissue formation in pellets was not affected as qualitatively assessed by safranin-O staining. At the oxygen concentrations evaluated, no effect of oxygen tension was observed on proliferation, oxygen consumption, and yield of lactate on glucose administration. For future investigations of chondrocytes and oxygen, the bioreactor system, which allows precise control and monitoring of oxygen tension, holds promise.

Medium optimization for spore production of coniothyrium minitans using statistically-based experimental designs

Statistically-based experimental designs were used to optimize a chemically defined solid medium for the spore production of Coniothyrium minitans. In the first optimization step the influence of starch, urea, phosphate, magnesium, calcium, thiamin and trace elements on spore production was evaluated using a fractional factorial design. Starch and trace elements influenced spore production positively while urea affected spore production negatively. The other components had no significant influence on spore production. In the second and third steps the concentrations of starch, urea and trace elements were further optimized using central composite designs and response surface analysis. This optimization strategy allowed the spore production to be increased by a factor 7 from 4 x 10(9) to almost 3 x 10(10) spores per Petri dish of 9 cm diameter. Copyright 1999 John Wiley & Sons, Inc.

Effect of temperature on the saccharide composition obtained after alpha-amylolysis of starch

The hydrolysis of starch to low-molecular-weight products (normally characterised by their dextrose equivalent (DE), which is directly related to the number-average molecular mass) was studied at different temperatures. Amylopectin potato starch, lacking amylose, was selected because of its low tendency towards retrogradation at lower temperatures. Bacillus licheniformis alpha-amylase was added to 10% [w/w] gelatinised starch solutions. The hydrolysis experiments were done at 50, 70, and 90 degrees C. Samples were taken at defined DE values and these were analysed with respect to their saccharide composition. At the same DE the oligosaccharide composition depended on the hydrolysis temperature. This implies that at the same net number of bonds hydrolysed by the enzyme, the saccharide composition was different. The hydrolysis temperature also influenced the initial overall molecular-weight distribution. Higher temperatures led to a more homogenous molecular weight distribution. Similar effects were observed for alpha-amylases from other microbial sources such as Bacillus amyloliquefaciens and Bacillus stearothermophilus. Varying the pH (5.1, 6.2, and 7.6) at 70 degrees C did not significantly influence the saccharide composition obtained during B. licheniformis alpha-amylase hydrolysis. The underlying mechanisms for B. licheniformis alpha-amylase were studied using pure linear oligosaccharides, ranging from maltotriose to maltoheptaose as substrates. Activation energies for the hydrolysis of individual oligosaccharides were calculated from Arrhenius plots at 60, 70, 80, and 90 degrees C. Oligosaccharides with a degree of polymerisation exceeding that of the substrate could be detected. The contribution of these oligosaccharides increased as the degree of polymerisation of the substrate decreased and the temperature of hydrolysis increased. The product specificity decreased with increasing temperature of hydrolysis, which led to a more equal distribution between the possible products formed. Calculations with the subsite map as determined for the closely related alpha-amylase from B. amyloliquefaciens reconfirmed this finding of a decreased substrate specificity with increased temperature of hydrolysis. Copyright 1999 John Wiley & Sons, Inc.

Acetate as a carbon source for hydrogen production by photosynthetic bacteria.

Hydrogen is a clean energy alternative to fossil fuels. Photosynthetic bacteria produce hydrogen from organic compounds by an anaerobic light-dependent electron transfer process. In the present study hydrogen production by three photosynthetic bacterial strains (Rhodopseudomonas sp., Rhodopseudomonas palustris and a non-identified strain), from four different short-chain organic acids (lactate, malate, acetate and butyrate) was investigated. The effect of light intensity on hydrogen production was also studied by supplying two different light intensities, using acetate as the electron donor. Hydrogen production rates and light efficiencies were compared. Rhodopseudomonas sp. produced the highest volume of H2. This strain reached a maximum H2 production rate of 25 ml H2 l(-1) h(-1), under a light intensity of 680 micromol photons m(-2) s(-1), and a maximum light efficiency of 6.2% under a light intensity of 43 micromol photons m(-2) s(-1). Furthermore, a decrease in acetate concentration from 22 to 11 mM resulted in a decrease in the hydrogen evolved from 214 to 27 ml H2 per vessel.

Dextran as protectant against damage caused by sparging for hybridoma cells in a bubble column.

The effect of the addition of dextran as a protective polymer against sparging was examined with hybridoma suspension cells in a bubble column under standardized conditions. The protective effect of high concentrations of high molecular weight dextran showed a correlation with the bulk viscosity of the medium. A distinct protective effect occurs at viscosities greater than 20 x 10(-3) Pa s-1. In contrast, low molecular weight dextrans that cause a minor increase in viscosity, also provide no protection against sparging. There is no strict correlation between surface tension and the protective effect of dextran against sparging. Oxygen transfer is strongly reduced by high concentrations of high molecular weight dextran. Therefore, addition of dextran as protective polymer against sparging for large-scale production processes with animal cells in stirred reactors does not seem feasible.