RESUMO
Photoactive formamidinium lead triiodide (α-FAPbI3) perovskite has dominated the prevailing high-performance perovskite solar cells (PSCs), normally for those spin-coated, conventional n-i-p structured devices. Unfortunately, α-FAPbI3 has not been made full use of its advantages in inverted p-i-n structured PSCs fabricated via blade-coating techniques owing to uncontrollable crystallization kinetics and complicated phase evolution of FAPbI3 perovskites. Herein, a customized crystal surface energy regulation strategy has been innovatively developed by incorporating 0.5 mol% of N-aminoethylpiperazine hydroiodide (NAPI) additive into α-FAPbI3 crystal-derived perovskite ink, which enabled the formation of phase-pure, highly-oriented α-FAPbI3 films. We deciphered the phase transformation mechanisms and crystallization kinetics of blade-coated α-FAPbI3 perovskite films via combining a series of in-situ characterizations. Interestingly, the strong chemical interactions between the NAPI and inorganic Pb-I framework help to reduce the surface energy of (100) crystal plane by 42%, retard the crystallization rate and lower the formation energy of α-FAPbI3. The resultant blade-coated inverted PSCs based on (100)-oriented α-FAPbI3 perovskite films realized promising efficiencies up to 24.16% (~26.5% higher than that of the randomly-oriented counterparts), accompanied by improved operational stability. This result represented one of the best performances reported to date for FAPbI3-based inverted PSCs fabricated via scalable deposition methods.
RESUMO
Sn perovskite solar cells have been regarded as one of the most promising alternatives to the Pb-based counterparts due to their low toxicity and excellent optoelectronic properties. However, the Sn perovskites are notorious to feature heavy p-doping characteristics and possess abundant vacancy defects, which result in under-optimized interfacial energy level alignment and severe nonradiative recombination. Here, we reported a synergic "electron and defect compensation" strategy to simultaneously modulate the electronic structures and defect profiles of Sn perovskites via incorporating a traced amount (0.1â mol %) of heterovalent metal halide salts. Consequently, the doping level of modified Sn perovskites was altered from heavy p-type to weak p-type (i.e. up-shifting the Fermi level by â¼0.12â eV) that determinately reducing the barrier of interfacial charge extraction and effectively suppressing the charge recombination loss throughout the bulk perovskite film and at relevant interfaces. Pioneeringly, the resultant device modified with electron and defect compensation realized a champion efficiency of 14.02 %, which is â¼46 % higher than that of control device (9.56 %). Notably, a record-high photovoltage of 1.013â V was attained, corresponding to the lowest voltage deficit of 0.38â eV reported to date, and narrowing the gap with Pb-based analogues (â¼0.30â V).
RESUMO
Mixed-cation, small band-gap perovskites via rationally alloying formamidinium (FA) and methylammonium (MA) together have been widely employed for blade-coated perovskite solar cells with satisfied efficiencies. One of the stringent challenges lies in difficult control of the nucleation and crystallization kinetics of the perovskites with mixed ingredients. Herein, a pre-seeding strategy by mixing FAPbI3 solution with pre-synthesized MAPbI3 microcrystals has been developed to smartly decouple the nucleation and crystallization process. As a result, the time window of initialized crystallization has been greatly extended by 3 folds (i.e. from 5â s to 20â s), which enables the formation of uniform and homogeneous alloyed-FAMA perovskite films with designated stoichiometric ratios. The resultant blade-coated solar cells achieved a champion efficiency of 24.31 % accompanied by outstanding reproducibility with more than 87 % of the devices showing efficiencies higher than 23 %.
RESUMO
The 2D/3D perovskite heterostructures have been widely investigated to enhance the efficiency and stability of perovskite solar cells (PSCs). However, rational manipulation of phase distribution and energy level alignment in such 2D/3D perovskite hybrids are still of great challenge. Herein, we successfully achieved spontaneous phase alignment of 2D/3D perovskite heterostructures by concurrently introducing both 2D perovskite component and organic halide additive. The graded phase distribution of 2D perovskites with different n values and 3D perovskites induced favorable energy band alignment across the perovskite film and boosted the charge transfer at the relevant heterointerfaces. Moreover, the 2D perovskite component also acted as a "band-aid" to simultaneously passivate the defects and release the residual tensile stress of perovskite films. Encouragingly, the blade-coated PSCs based on only ≈2â s in-situ fast annealed 2D/3D perovskite films with favorable energy funnels and toughened heterointerfaces achieved promising efficiencies of 22.5 %, accompanied by extended lifespan. To our knowledge, this is the highest reported efficiency for the PSCs fabricated with energy-saved thermal treatment just within a few seconds, which also outperformed those state-of-the-art annealing-free analogues. Such a two-second-in-situ-annealing technique could save the energy cost by up to 99.6 % during device fabrication, which will grant its low-coast implementation.
RESUMO
Tin-based perovskite solar cells (Sn-PSCs) have emerged as promising environmentally viable photovoltaic technologies, but still suffer from severe non-radiative recombination loss due to the presence of abundant deep-level defects in the perovskite film and under-optimized carrier dynamics throughout the device. Herein, we healed the structural imperfections of Sn perovskites in an "inside-out" manner by incorporating a new class of biocompatible chelating agent with multidentate claws, namely, 2-Guanidinoacetic acid (GAA), which passivated a variety of deep-level Sn-related and I-related defects, cooperatively reinforced the passivation efficacy, released the lattice strain, improved the structural toughness, and promoted the carrier transport of Sn perovskites. Encouragingly, an efficiency of 13.7 % with a small voltage deficit of ≈0.47â V has been achieved for the GAA-modified Sn-PSCs. GAA modification also extended the lifespan of Sn-PSCs over 1200â hours.
Assuntos
Compostos de Cálcio , Estanho , Quelantes , Óxidos , Recombinação Genética , TitânioRESUMO
The power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) are already higher than those of other thin-film photovoltaic technologies, but the high-efficiency cells are based on complicated device architectures with multiple layers of coating. A promising strategy to commercialize this emerging technology is to simplify the device structure while simultaneously maintaining high-efficiency. Charge transport layers (CTLs) are generally indispensable for achieving high-performance PSCs, but the high cost and possibility of instability hinder the mass production of efficient, stable PSCs in a cost-effective manner. The ambipolar carrier transfer characteristic of perovskite materials makes it possible to fabricate efficient PSCs even in the absence of electron and/or hole transport layers. Encouragingly, the reported PCEs of CTL-free PSCs are already over 20%. However, it is still a mystery about why and how CTL-free devices can work efficiently. Here, we summarize the recent strategies developed to improve the performance of CTL-free PSCs, aiming at strengthening the comprehensive understanding of the fundamental carrier dynamics, heterojunction merits and device physics behind these mysteriously simple yet efficient devices. This review sheds light on identifying the limiting and determining factors in achieving high-efficiency CTL-free devices, and proposes some empirical charge transport models (e.g. p-type doping of perovskites for HTL-free PSCs, n-type doping of perovskites for ETL-free PSCs, constructing efficient p-n heterojunctions and/or homojunctions at one side/interface or employing perovskite single crystal-based lateral geometry for both HTL and ETL-free PSCs, etc.) that are useful to further improve device performance. In addition, an insightful perspective for the future design and commercial development of large-scale, efficient and stable optoelectronic devices by employing carbon electrodes is provided.
RESUMO
Simplified perovskite solar cells (PSCs) were fabricated with the perovskite layer sandwiched and encapsulated between carbon-based electron transport layer (ETL) and counter electrode (CE) by a fully blade-coated process. A self-assembled monolayer of amphiphilic silane (AS) molecules on transparent conducting oxide (TCO) substrate appeals to the fullerene ETL deposition and preserves its integrity against the solvent damage. The AS serves as a "molecular glue" to strengthen the adhesion toughness at the TCO/ETL interface via robust chemical interaction and bonding, facilitating the interfacial charge extraction, increasing PCEs by 77 % and reducing hysteresis. A PCE of 18.64 % was achieved for the fully printed devices, one of the highest reported for carbon-based PSCs. AS-assisted interfacial linkage and carbon-material-assisted self-encapsulation enhance the stability of the PSCs, which did not experience performance degradation when stored at ambient conditions for over 3000â h.
RESUMO
State-of-the-art, high-performance perovskite solar cells (PSCs) contain a large amount of iodine to realize smaller bandgaps. However, the presence of numerous iodine vacancies at the surface of the film formed by their evaporation during the thermal annealing process has been broadly shown to induce deep-level defects, incur nonradiative charge recombination, and induce photocurrent hysteresis, all of which limit the efficiency and stability of PSCs. In this work, modifying the defective surface of perovskite films with cadmium iodide (CdI2) effectively reduces the degree of surface iodine deficiency and stabilizes iodine ions via the formation of strong Cd-I ionic bonds. This largely reduces the interfacial charge recombination loss, yielding a high efficiency of 21.9% for blade-coated PSCs with an open-circuit voltage of 1.20 V, corresponding to a record small voltage deficit of 0.31 V. The CdI2 surface treatment also improves the operational stability of the PSCs, retaining 92% efficiency after constant illumination at 1 sun intensity for 1000 h. This work provides a promising strategy to optimize the surface/interface optoelectronic properties of perovskites for more efficient and stable solar cells and other optoelectronic devices.
RESUMO
The utilization of solar energy and the development of its related optoelectronic devices have become more important than ever. Solar cells or photoelectrochemical (PEC) cells that require the design of light harvesting assemblies for efficiently converting solar light into electricity or solar fuels are of particular interest. Semiconductor TiO2, serving as the photoelectrode for photovoltaic devices (e.g., dye- or quantum dot-sensitized solar cells (DSSCs/QDSSCs) or perovskite solar cells (PSCs)) and PEC cells, has aroused intense research interest owing to its inherent characteristics of wide band gap and promising optical and electrical properties. TiO2 nanowires (TNWs) have been widely used in optoelectronic devices due to their unique 1D geometry and salient optical and electrical properties. However, the insufficient surface area resulting from the relatively large diameter of NWs and considerable free space between adjacent NWs restricts their optoelectronic performance. Hence, it is desirable to explore every feasible aspect of TNWs in terms of structural design and optical management, aiming to further improve the performance of optoelectronic devices. In this Account, we present a brief survey of strategies for designing branched or hyperbranched TNW-based photoelectrodes and their applications in solar cells and PEC cells. The general strategies (e.g., alkaline/acid hydrothermal method, lift-off transfer, and self-assembly approach) are discussed to address the challenges associated with fabricating TNWs on transparent conducting oxide (TCO) substrates. A series of strategies to fabricate judiciously designed 3D branched array architectures, including length tuning and sequential surface branched or hyperbranched modification, are proposed. The versatile implantation of the TNWs onto other backbones (nanosheets, nanotubes, hollow spheres, or multilayered electrodes) and substrates (fiber-shaped metal wire or mesh, flexible metal foil, or plastic sheet) is demonstrated to construct a new class of the TNW-embedded composite electrode materials with desired morphological characteristics and optoelectronic properties, for example, favorable energy level alignment for cascade charge transfer and rational homogeneous/heterogeneous interfacial engineering. The functionalities of TNW-based electrodes include enlarged surface area and superior light scattering for maximized light harvesting, as well as facilitated charge transport and suppressed charge recombination for enhanced charge collection, which are promising in optoelectronic fields such as solar cells, photocatalysis, and PEC cells. Beyond TNWs, one can also integrate other types of semiconductor (e.g., Fe2O3 or WO3) NWs into rationally designed structures for preparing novel photocatalytic materials with panchromatic absorption, efficient charge transfer, and excellent catalytic properties. Finally, an insightful perspective for rational design of advanced NW-based materials is provided.
RESUMO
The performances of electron-transport-layer (ETL)-free perovskite solar cells (PSCs) are still inferior to ETL-containing devices. This is mainly due to severe interfacial charge recombination occurring at the transparent conducting oxide (TCO)/perovskite interface, where the photo-injected electrons in the TCO can travel back to recombine with holes in the perovskite layer. Herein, we demonstrate for the first time that a non-annealed, insulating, amorphous metal oxyhydroxide, atomic-scale thin interlayer (ca. 3â nm) between the TCO and perovskite facilitates electron tunneling and suppresses the interfacial charge recombination. This largely reduced the interfacial charge recombination loss and achieved a record efficiency of 21.1 % for n-i-p structured ETL-free PSCs, outperforming their ETL-containing metal oxide counterparts (18.7 %), as well as narrowing the efficiency gap with high-efficiency PSCs employing highly crystalline TiO2 ETLs.
RESUMO
Ordered 1D metal oxide structure is desirable in thin film solar cells owing to its excellent charge collection capability. However, the electron transfer in 1D electron transporting layer (ETL)-based devices is still limited to a submicrometer-long pathway that is vertical to the substrate. Here, an innovative closely packed rutile TiO2 nanowire (CRTNW) network parallel to the facet of fluorine-doped tin oxide (FTO) substrate is reported, which can serve as a 1D nanoscale electron transport pathway for efficient perovskite solar cells (PSCs). The PSC constructed using newly prepared CRTNW ETL achieves an impressive power conversion efficiency of 21.10%, which can be attributed to the facilitated electron extraction induced by the favorable junctions formed at FTO/ETL and ETL/perovskite interfaces and also the suppressed charge recombination originating from improved perovskite morphology with large grains, flat surface, and good surface coverage. The bifacial contact junctions engineering also enables large-area device fabrication. The PSC with 1 cm2 aperture yields an efficiency of 19.50% under one sun illumination. This work highlights the significance of controlling the orientation and packing density of the ordered 1D oxide nanostructured thin films for highly efficient optoelectronic devices in a large-scale manner.
RESUMO
An unprecedented attempt was conducted on suitably functionalized integration of three-dimensional hyperbranched titania architectures for efficient multistack photoanode, constructed via layer-by-layer assembly of hyperbranched hierarchical tree-like titania nanowires (underlayer), branched hierarchical rambutan-like titania hollow submicrometer-sized spheres (intermediate layer), and hyperbranched hierarchical urchin-like titania micrometer-sized spheres (top layer). Owing to favorable charge-collection, superior light harvesting efficiency and extended electron lifetime, the multilayered TiO2-based devices showed greater J(sc) and V(oc) than those of a conventional TiO2 nanoparticle (TNP), and an overall power conversion efficiency of 11.01% (J(sc) = 18.53 mA cm(-2); V(oc) = 827 mV and FF = 0.72) was attained, which remarkably outperformed that of a TNP-based reference cell (η = 7.62%) with a similar film thickness. Meanwhile, the facile and operable film-fabricating technique (hydrothermal and drop-casting) provides a promising scheme and great simplicity for high performance/cost ratio photovoltaic device processability in a sustainable way.
RESUMO
Light-harvesting and charge collection have attracted increasing attention in the domain of photovoltaic cells, and can be facilitated dramatically by appropriate design of a photonic nanostructure. However, the applicability of current light-harvesting photoanode materials with single component and/or morphology (such as, particles, spheres, wires, sheets) is still limited by drawbacks such as insufficient electron-hole separation and/or light-trapping. Herein, we introduce a universal method to prepare hierarchical assembly of macroporous material-nanowire coated homogenous or heterogeneous metal oxide composite electrodes (TiO2 -TiO2 , SnO2 -TiO2 , and Zn2 SnO4 -TiO2 ; homogenous refers to a material in which the nanowire and the macroporous material have the same composition, i.e. both are TiO2 . Heterogeneous refers to a material in which the nanowires and the macroporous material have different compositions). The dye-sensitized solar cell based on a TiO2 -macroporous material-TiO2 -nanowire homogenous composition electrode shows an impressive conversion efficiency of 9.51 %, which is much higher than that of pure macroporous material-based photoelectrodes to date.
RESUMO
Narrow-bandgap Sn-Pb alloying perovskites showcased great potential in constructing multiple-junction perovskite solar cells (PSCs) with efficiencies approaching or exceeding the Shockley-Queisser limit. However, the uncontrollable surface metal abundance (Sn2+ and Pb2+ ions) hinders their efficiency and versatility in different device structures. Additionally, the undesired Pb distribution mainly at the buried interface accelerates the Pb leakage when devices are damaged. In this work, a novel strategy is presented to modulate crystallization kinetics and surface metal abundance of Sn-Pb perovskites using a cobweb-like quadrangular macrocyclic porphyrin material, which features a molecular size compatible with the perovskite lattice and robustly coordinates with Pb2+ ions, thus immobilizing them and increasing surface Pb abundance by 61%. This modulation reduces toxic Pb leakage rates by 24-fold, with only â¼23 ppb Pb in water after severely damaged PSCs are immersed in water for 150 h.This strategy can also enhance chemical homogeneity, reduce trap density, release tensile strain and optimize carrier dynamics of Sn-Pb perovskites and relevant devices. Encouragingly, the power conversion efficiency (PCEs) of 23.28% for single-junction, full-stack devices and 21.34% for hole transport layer-free Sn-Pb PSCs are achieved.Notably, the related monolithic all-perovskite tandem solar cell also achieves a PCE of 27.03% with outstanding photostability.
RESUMO
Lead halide perovskites show great potential to be used in wearable optoelectronics. However, obstacles for real applications lie in their instability under light, moisture and temperature stress, noxious lead ions leakage and difficulties in fabricating uniform luminescent textiles at large scale and high production rates. Overcoming these obstacles, we report simple, high-throughput electrospinning of large-area (> 375 cm2) flexible perovskite luminescent textiles woven by ultra-stable polymer@perovskite@cyclodextrin@silane composite fibers. These textiles exhibit bright and narrow-band photoluminescence (a photoluminescence quantum yield of 49.7%, full-width at half-maximum <17 nm) and the time to reach 50% photoluminescence of 14,193 h under ambient conditions, showcasing good stability against water immersion (> 3300 h), ultraviolet irradiation, high temperatures (up to 250 °C) and pressure surge (up to 30 MPa). The waterproof PLTs withstood fierce water scouring without any detectable leaching of lead ions. These low-cost and scalable woven PLTs enable breakthrough application in marine rescue.
RESUMO
Organic nonlinear optical materials have potential in applications such as lightings and bioimaging, but tend to have low photoluminescent quantum yields and are prone to lose the nonlinear optical activity. Herein, we demonstrate to weave large-area, flexible organic nonlinear optical membranes composed of 4-N,N-dimethylamino-4'-N'-methyl-stilbazolium tosylate@cyclodextrin host-guest supramolecular complex. These membranes exhibited a record high photoluminescence quantum yield of 73.5%, and could continuously emit orange luminescence even being heated at 300 °C, thus enabling the fabrication of thermotolerant light-emitting diodes. The nonlinear optical property of these membranes can be well-preserved even in polar environment. The supramolecular assemblies with multiphoton absorption characteristics were used for in vivo real-time imaging of Escherichia coli at 1000 nm excitation. These findings demonstrate to achieve scalable fabrication of organic nonlinear optical materials with high photoluminescence quantum yields, and good stability against thermal stress and polar environment for high-performance, durable optoelectronic devices and humanized multiphoton bio-probes.
Assuntos
Ciclodextrinas , Iluminação , Benzenossulfonatos , Escherichia coliRESUMO
Narrow-bandgap mixed Sn-Pb perovskite solar cells (PSCs) have showcased great potential to approach the Shockley-Queisser limit. Nevertheless, the practical application and long-term deployment of mixed Sn-Pb PSCs are still largely impeded by the rapid oxidation of Sn2+ ions and under-optimized carrier transport layer (CTL)/perovskite interfaces that would inevitably incur serious interfacial charge recombination and device performance degradation. Herein, we successfully removed the hole transport layer (HTL) by incorporating a small amount of organic phosphonic acid molecules into perovskites, which could preferably interact with Sn2+ ions (relative to Pb2+ analogues) at the grain boundaries (GBs) throughout the perovskite film thickness via coordination bonding, thus effectively retarding the oxidation of Sn2+, passivating the defects and suppressing the non-radiative recombination. Targeted modification effectively reinforced built-in potential by â¼100 mV, and favorably induced energy level cascade, thus accelerating spatial charge separation and facilitating the hole extraction from perovskite layer to underlying conductive electrodes even in the absence of HTL. Consequently, enhanced power conversion efficiencies up to 20.21% have been achieved, which is the record efficiency for the HTL-free mixed Sn-Pb PSCs, accompanied by a decent photovoltage of 0.87 V and improved long-term stability over 2400 h.
RESUMO
Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices (solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices (artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.
RESUMO
A novel hierarchical TiO(2) flower consisting of anatase TiO(2) nanotubes on a Ti foil substrate has been prepared via a mild hydrothermal reaction of TiO(2) nanoparticles/Ti foil. The photovoltaic performance of DSSC based on hierarchical TiO(2) flowers/Ti (7.2%) is much higher than that of TiO(2) nanoparticle/Ti (6.63%) because of its superior light scattering ability and fast electron transport. Moreover, full flexible DSSC based on the novel hierarchical TiO(2) flowers/Ti foil photoelectrode and electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT) on indium tin oxide-coated poly(ethylene terephthalate) (ITO-PET) counter electrode shows a significant power conversion efficiency of 6.26%, accompanying a short-circuit current density of 11.96 mA cm(-2), an open-circuit voltage of 761 mV and a fill factor of 0.69.
RESUMO
The power conversion efficiency for single-junction solar cells is limited by the Shockley-Quiesser limit. An effective approach to realize high efficiency is to develop multi-junction cells. These years have witnessed the rapid development of organic-inorganic perovskite solar cells. The excellent optoelectronic properties and tunable bandgaps of perovskite materials make them potential candidates for developing tandem solar cells, by combining with silicon, Cu(In,Ga)Se2 and organic solar cells. In this review, we present the recent progress of perovskite-based tandem solar cells, including perovskite/silicon, perovskite/perovskite, perovskite/Cu(In,Ga)Se2, and perovskite/organic cells. Finally, the challenges and opportunities for perovskite-based tandem solar cells are discussed.