Multidentate Chelation Achieves Bilateral Passivation toward Efficient and Stable Perovskite Solar Cells with Minimized Energy Losses.

Defects in the electron transport layer (ETL), perovskite, and buried interface will result in considerable nonradiative recombination. Here, a bottom-up bilateral modification strategy is proposed by incorporating arsenazo III (AA), a chromogenic agent for metal ions, to regulate SnO2 nanoparticles. AA can complex with uncoordinated Sn4+/Pb2+ in the form of multidentate chelation. Furthermore, by forming a hydrogen bond with formamidinium (FA), AA can suppress FA+ defects and regulate crystallization. Multiple chemical bonds between AA and functional layers are established, synergistically preventing the agglomeration of SnO2 nanoparticles, enhancing carrier transport dynamics, passivating bilateral defects, releasing tensile stress, and promoting the crystallization of perovskite. Ultimately, the AA-optimized power conversion efficiency (PCE) of the methylammonium-free (MA-free) devices (Rb0.02(FA0.95Cs0.05)0.98PbI2.91Br0.03Cl0.06) is boosted from 20.88% to 23.17% with a high open-circuit voltage (VOC) exceeding 1.18 V and ultralow energy losses down to 0.37 eV. In addition, the optimized devices also exhibit superior stability.

Comparison of implant placement at crestal and subcrestal levels in aesthetic zone: A finite element analysis.

PURPOSE: The success rate of the implant treatment, including aesthetics and long-term survival, relies heavily on preserving crestal peri-implant bone, as it determines the stability and long-term outcomes. This study aimed to demonstrate the stress differences in the crestal bone resulting from dental implant placement at various depths relative to the crestal bone level using finite element analysis. MATERIALS AND METHODS: Three study models were prepared for implant placement at the crestal bone level (CL), 1 mm depth (SL-1), and 2 mm depth (SL-2). Implants were placed in the maxillary central incisor region of each model, and 100 N vertical and oblique forces were applied. The von Mises, maximum principal (tensile), and minimum principal (compressive) stresses were evaluated. RESULTS: The CL model exhibited the highest stresses on the implant, abutment, and abutment screws under vertical and oblique forces. For maximum principal stress in the crestal bone under vertical force, the SL-2, SL-1, and CL models recorded values of 6.56, 6.26, and 5.77 MPa, respectively. Under oblique forces, stress values for SL-1, SL-2, and CL were 25.3, 24.91, and 23.76 MPa, respectively. The CL model consistently exhibited the lowest crestal bone stress at all loads and the highest stress values on the implant and its components. Moreover, considering the yield strengths of the materials, no mechanical or physiological complications were noted. CONCLUSIONS: Placing the implant at the crestal level or subcrestally beyond the cortical layer could potentially reduce stress and minimize crestal bone loss. However, further studies are warranted for confirmation.

Grain-Boundary-Rich RuO2 Porous Nanosheet for Efficient and Stable Acidic Water Oxidation.

RuO2 has been considered as the most likely acidic oxygen evolution reaction (OER) catalyst to replace IrO2, but its performance, especially long-term stability under harsh acidic conditions, is still unacceptable. Here, we propose a grain boundary (GB) engineering strategy by fabricating the ultrathin porous RuO2 nanosheet with abundant of grain boundaries (GB-RuO2) as an efficient acid OER catalyst. The involvement of GB induces significant tensile stress and creates an unsaturated coordination environment, effectively optimizing the adsorption of intermediates and stabilizing active site structure during OER process. Notably, the GB-RuO2 not only exhibits a low overpotential (η10=187 mV) with an ultra-low Tafel slope (34.5 mV dec-1), but also steadily operates for over 550 h in 0.1 M HClO4. Quasi in situ/operando methods confirm that the improved stability is attributed to GB preventing Ru dissolution and greatly inhibiting the lattice oxygen oxidation mechanism (LOM). A proton exchange membrane water electrolysis (PEMWE) using the GB-RuO2 catalyst operates a low voltage of 1.669 V at 2 A cm-2 and operates stably for 100 h at 100 mA cm-2.

Regulation of the integrin αVß3- actin filaments axis in early osteogenic differentiation of human mesenchymal stem cells under cyclic tensile stress.

BACKGROUND: Integrins are closely related to mechanical conduction and play a crucial role in the osteogenesis of human mesenchymal stem cells. Here we wondered whether tensile stress could influence cell differentiation through integrin αVß3. METHODS: We inhibited the function of integrin αVß3 of human mesenchymal stem cells by treating with c(RGDyk). Using cytochalasin D and verteporfin to inhibit polymerization of microfilament and function of nuclear Yes-associated protein (YAP), respectively. For each application, mesenchymal stem cells were loaded by cyclic tensile stress of 10% at 0.5 Hz for 2 h daily. Mesenchymal stem cells were harvested on day 7 post-treatment. Western blotting and quantitative RT-PCR were used to detect the expression of alkaline phosphatase (ALP), RUNX2, ß-actin, integrin αVß3, talin-1, vinculin, FAK, and nuclear YAP. Immunofluorescence staining detected vinculin, actin filaments, and YAP nuclear localization. RESULTS: Cyclic tensile stress could increase the expression of ALP and RUNX2. Inhibition of integrin αVß3 activation led to rearrangement of actin filaments and downregulated the expression of ALP, RUNX2 and promoted YAP nuclear localization. When microfilament polymerization was inhibited, ALP, RUNX2, and nuclear YAP nuclear localization decreased. Inhibition of YAP nuclear localization could reduce the expression of ALP and RUNX2. CONCLUSIONS: Cyclic tensile stress promotes early osteogenesis of human mesenchymal stem cells via the integrin αVß3-actin filaments axis. YAP nuclear localization participates in this process of human mesenchymal stem cells. Video Abstract.

Effect of Acetylation of Two Cellulose Nanocrystal Polymorphs on Processibility and Physical Properties of Polylactide/Cellulose Nanocrystal Composite Film.

Polylactide (PLA) has become a popular alternative for petroleum-based plastics to reduce environmental pollution. The broader application of PLA is hampered by its brittle nature and incompatibility with the reinforcement phase. The aim of our work was to improve the ductility and compatibility of PLA composite film and investigate the mechanism by which nanocellulose enhances PLA polymer. Here, we present a robust PLA/nanocellulose hybrid film. Two different allomorphic cellulose nanocrystals (CNC-I and CNC-III) and their acetylated products (ACNC-I and ACNC-III) were used to realize better compatibility and mechanical performance in a hydrophobic PLA matrix. The tensile stress of the composite films with 3% ACNC-I and ACNC-III increased by 41.55% and 27.22% compared to pure PLA film, respectively. Compared to the CNC-I or CNC-III enhanced PLA composite films, the tensile stress of the films increased by 45.05% with 1% ACNC-I and 56.15% with 1% ACNC-III. In addition, PLA composite films with ACNCs showed better ductility and compatibility because the composite fracture gradually transitioned to a ductile fracture during the stretching process. As a result, ACNC-I and ACNC-III were found to be excellent reinforcing agents for the enhancement of the properties of polylactide composite film, and the replacement some petrochemical plastics with PLA composites would be very promising in actual life.

Combining stretching and gallic acid to decrease inflammation indices and promote extracellular matrix production in osteoarthritic human articular chondrocytes.

Osteoarthritis (OA) patients undergo cartilage degradation and experience painful joint swelling. OA symptoms are caused by inflammatory molecules and the upregulation of catabolic genes leading to the breakdown of cartilage extracellular matrix (ECM). Here, we investigate the effects of gallic acid (GA) and mechanical stretching on the expression of anabolic and catabolic genes and restoring ECM production by osteoarthritic human articular chondrocytes (hAChs) cultured in monolayers. hAChs were seeded onto conventional plates or silicone chambers with or without 100 µM GA. A 5% cyclic tensile strain (CTS) was applied to the silicone chambers and the deposition of collagen and glycosaminoglycan, and gene expressions of collagen types II (COL2A1), XI (COL11A2), I (COL1A1), and X (COL10A1), and matrix metalloproteinases (MMP-1 and MMP-13) as inflammation markers, were quantified. CTS and GA acted synergistically to promote the deposition of collagen and glycosaminoglycan in the ECM by 14- and 7-fold, respectively. Furthermore, the synergistic stimuli selectively upregulated the expression of cartilage-specific proteins, COL11A2 by 7-fold, and COL2A1 by 47-fold, and, in contrast, downregulated the expression of MMP-1 by 2.5-fold and MMP-13 by 125-fold. GA supplementation with CTS is a promising approach for restoring osteoarthritic hAChs ECM production ability making them suitable for complex tissue engineering applications.

Mechanism of Cyclic Tensile Stress in Osteogenic Differentiation of Human Periodontal Ligament Stem Cells.

Human periodontal ligament stem cells (hPDLSCs) can undergo osteogenic differentiation under induction conditions. Cyclic tensile stress (CTS) can stimulate stem cell osteogenic differentiation. The present study explored the mechanism of CTS in hPDLSC osteogenic differentiation. The hPDLSCs of the 4th passage were selected. hPDLSCs were subjected to CTS with deformation of 10% elongation at 0.5 Hz for 1, 4, 8, 12 and 24 h. ALP activity and staining, ARS staining and detection of expressions of osteogenesis-related genes (RUNX2, OPN, Sp7 and OCN) were used to assess hPDLSC osteogenic differentiation ability. microRNA (miR)-129-5p and BMP2 expression and p-Smad1/5 level were detected under CTS stimulation. The binding relationship between miR-129-5p and BMP2 was predicted and verified. The osteogenic differentiation ability of CTS-treated hPDLSCs was evaluated after intervention of miR-129-5p and BMP2. CTS induced hPDLSC osteogenic differentiation, as manifested by increased ALP activities, osteogenesis-related gene expressions and mineralized nodules, together with positive ALP staining. CTS inhibited miR-129-5p expression, and promoted BMP2 expression and p-Smad1/5 level in hPDLSCs. miR-129-5p targeted BMP2. Overexpressed miR-129-5p or silenced BMP2 prevented hPDLSC osteogenic differentiation ability. We demonstrated that CTS inhibited miR-129-5p expression, and then activated the BMP2/Smad pathway, thereby showing stimulative effects on hPDLSC osteogenic differentiation.

New Hybrid Polyurea-Polyurethane Elastomers with Antistatic Properties and an Influence of Various Additives on Their Physicochemical Properties.

Polyurea is a synthetic high-strength elastomeric material that can be sprayed as a coating over existing structures in order to protect against weathering effects. It is ideal for anti-corrosion protection and is characterized by excellent mechanical properties and adhesion to various surfaces. Further development of this technology may allow obtaining new coatings with improved antistatic properties, which would be an excellent alternative compared to used antistatic epoxy paints. This paper will examine the influence of tetraalkylammonium salt (1), potassium hexafluorophosphate solution (2) and imidazolium-based ionic liquid (3) on the improvement of antistatic properties of the polyurea-polyurethane coatings. In addition, the modified samples were also verified in terms of changes in mechanical properties and the appearance of functional groups other than in the reference sample, as well as surface defects that may arise due to incompatibility of the antistatic additive with the polymer matrix. In order to obtain information about the properties mentioned above, the electrical resistance was determined, the tensile strength and elongation were measured, FT-IR spectra were made, and images were taken with the use of scanning electron microscopy. The conducted research showed that the antistatic properties of the tested hybrid coatings could be improved, but their use may be associated with certain limitations that should be taken into account when designing such materials.

The Role of α, γ, and Metastable Polymorphs on Electrospun Polyamide 6/Functionalized Graphene Oxide.

The present paper describes the addition of nitroxide-functionalized graphene oxide (GOFT) into polyamide 6 (PA6) micro- and nanofibers, which are obtained through electrospinning. Scanning electron microscopy micrographs demonstrate the presence of fibers. Tensile testing presents an unexpected and non-obvious behavior, in which the Young's modulus, tensile strength, and elongation simultaneously and remarkably increase compared to the pristine polymer nanofibers. GOFT induces the hydrogen bonding between the NH group from PA6 with the functional groups, thus promoting higher crystallinity of the polymer matrix. Nonetheless, deconvoluted curves by differential scanning calorimetry reveal the presence of two quasi-steady polymorphs (ß and Î´ phases) contributing to 46% of the total crystallinity. This evidence suggests that their presence and high ratios are responsible for the unexpected and simultaneous enhancement of tensile properties.

shRNA knockdown of integrin-linked kinase on hPDLCs migration, proliferation, and apoptosis under cyclic tensile stress.

OBJECTIVE: To investigate the roles of integrin-linked kinase (ILK) in mediating the cell migration, proliferation, and apoptosis of human periodontal ligament cells (hPDLCs) in response to cyclic tensile stress. METHODS: Primary hPDLCs were obtained through the enzyme digestion and tissue culture method. Short hairpin ILK-expressing hPDLCs were constructed using a recombinant lentiviral vector that specifically targeted ILK gene expression. The silencing of the ILK gene was identified by quantitative real-time polymerase chain reaction (qRT-PCR) and Western blot. The hPDLCs were seeded on a flexible substrate and loaded with cyclic tensile stress at 0.5 Hz for 0, 2, 4, and 8 hr, consecutively, with the Flexcell Tension System. The response of cell migration was tested by the scratch assay. Cell proliferation was characterized by optical density (OD) value of cell counting kit-8 (CCK-8) test and Ki67 mRNA expression of qRT-PCR. Cell apoptosis was determined by flow cytometry and Caspase-3 mRNA expression of qRT-PCR. RESULTS: Knocking down ILK substantially reduces migration and proliferation as well as regulates the sensitivity of hPDLCs to apoptosis under cyclic tensile stress. CONCLUSIONS: ILK can promote the proliferation and migration as well as inhibit apoptosis of hPDLCs under cyclic tensile stress.

Standardized Fabrication Method of Human-Derived Emboli with Histologic and Mechanical Quantification for Stroke Research.

BACKGROUND: As access to patient emboli is limited, embolus analogs (EAs) have become critical to the research of large vessel occlusion (LVO) stroke and the development of thrombectomy technology. To date, techniques for fabricating standardized human blood-derived EAs are limited in the variety of compositions, and the mechanical properties relevant to thrombectomy are not quantified. METHODS: EAs were made by mixing human banked red blood cells (RBCs), plasma, and platelet concentrate in 10 different volumetric percentage combinations to mimic the broad range of patient emboli causing LVO strokes. The samples underwent histologic analysis and tensile testing to mimic the pulling action of thrombectomy devices, and were compared to patient emboli. RESULTS: EAs had histologic compositions of 0-96% RBCs, 0.78%-92% fibrin, and 2.1%-22% platelets, which can be correlated with the ingredients using a regression model. At fracture, EAs elongated from 81% to 136%, and the ultimate tensile stress ranged from 16 to 949 kPa. These EAs' histologic compositions and tensile properties showed great similarity to those of emboli retrieved from LVO stroke patients, indicating the validity of such EA fabrication methods. EAs with lower RBC and higher fibrin contents are more extensible and can withstand higher tensile stress. CONCLUSIONS: EAs fabricated and tested using the proposed new methods provide a platform for stroke research and pre-clinical development of thrombectomy devices.

Softening at the onset of grape ripening alters fruit rheological properties and decreases splitting resistance.

MAIN CONCLUSION: Applying principles of shell theory, we found that grape berries rapidly change their behavior from thick-walled spheres to pressurized thin-walled spheres and become susceptible to splitting during berry softening. Knowledge of the rheological properties of the skin of berry fruits is needed to make decisions concerning berry splitting prevention. However, how these properties and splitting resistance respond to varietal differences and developmental changes is poorly understood. In a customized injection test, pressurized water was injected into the berries of four grape varieties until they split. In a compression test, the deformation of berries in response to berry softening or dehydration was measured. Shell theory was applied to estimate how the internal pressure translates to tensile stress on the skin. The results suggested that berry softening at the onset of ripening drastically alters berry rheological properties; berries rapidly changed from brittle to ductile materials. The skin became the major stress-bearing structure during berry softening and became vulnerable to tensile stress, which was associated with a rapid decline in splitting resistance. The rate of decline and the absolute extent of the skin's ability to bear stress varied by variety. Dehydration of overripe or water-stressed berries did not alter the skin properties but reduced the risk of berry splitting. These results indicate that the vulnerability to berry splitting is closely related to developmentally regulated changes in fruit rheological properties and water relations.

Ultrasound assessment of tensile stress in carotid arteries of healthy human subjects with varying age.

BACKGROUND: Arterial remodeling is thought to reflect the adaptation of the vessel wall to mechanical and hemodynamic stimuli and contributes to the progression of cardiovascular and cerebrovascular diseases. Tensile stress (TS) is one of the mechanical properties of the artery wall. The purpose of this study was to investigate the tensile stress change (TS) of carotid artery with varying viscoelasticity in healthy subjects within two groups of different ages. METHODS: Forty-five subjects were recruited and randomly assigned into the group at the age above 50 years and below 50 years. The carotid arteries were examined by ultrasonography, using the techniques of shear wave elastography (SWE), shear wave dispersion (SWD) and radiofrequency (RF) -based ultrasound. The following values, including elastic modulus (SWER) and viscous index (SWDR), as well as the peak and mean TS of the left and right carotid arteries (L-PTS, R-PTS, L-MTS and R-MTS) were measured. The correlations between SWER, SWDR and tensile stress were evaluated. RESULTS: The SWER and SWDR of carotid arteries are lower in the subjects ≥50 years old than the subjects younger than 50 years (SWER, 10.29 ± 9.57 kPa VS 17.24 ± 14.07 kPa; SWDR, 11.99 ± 3.51 (m/s)/kHz VS 13.97 ± 3.71 (m/s)/kHz, P < 0.05). The R-PTS was lower in the group with younger age (P < 0.05). Pearson correlation analysis showed that SWER of carotid artery was positively correlated with the parameters of tensile stress, R-PTS, R-MTS, L-PTS and L-MTS(r = 0.218, r = 0.359, r = 0.209 and r = 0.369, respectively, P < 0.05). However, SWDR of carotid arteries was not significantly associated with TS. CONCLUSION: Ultrasonic shear wave imaging could be used to quantitatively assess carotid viscoelasticity. The carotid TS was related to its elasticity while little related to its viscosity, suggesting that mechanical properties of the arterial wall might be better revealed. TRIAL REGISTRATION: Date of our trial registration: 2018-06-11. Registered with the official website of China Clinical Trial Registration Center (ChiCTR1800016590).

A Study of Parameters Affecting Atom Probe Tomography Specimen Survivability.

Specimen survivability is a primary concern to those who utilize atom probe tomography (APT) for materials analysis. The state-of-the-art in understanding survivability might best be described as common-sense application of basic physics principles to describe failure mechanisms. For example, APT samples are placed under near-failure mechanical-stress conditions, so reduction in the force required to initiate field evaporation must provide for higher survivability-a common sense explanation of survivability. However, the interplay of various analytical conditions (or instrumentation) and how they influence survivability (e.g., decreasing the applied evaporation field improves survivability), and which factors have more impact than others has not been studied. In this paper, we report on the systematic analysis of a material composed of a silicon-dioxide layer surrounded on two sides by silicon. In total, 261 specimens were fabricated and analyzed under a variety of conditions to correlate statistically significant survivability trends with analysis conditions and other specimen characteristics. The primary result suggests that, while applied field/force plays an obvious role in survivability for this material, the applied field alone does not predict survivability trends for silicon/silicon-dioxide interfaces. The rate at which ions are extracted from the specimen (both in terms of ions-per-pulse and pulse-frequency) has similar importance.

Nicotine inhibits osteogenic differentiation of human periodontal ligament cells under cyclic tensile stress through canonical Wnt pathway and α7 nicotinic acetylcholine receptor.

BACKGROUND AND OBJECTIVES: Nicotine, the main psychoactive component of tobacco, affects cell metabolism, proliferation, adhesion and, importantly, the osteogenic differentiation of fibroblasts. Approximately 15% of all orthodontic patients are adults among who one-fifth are smokers. Hence, it is necessary to have insight into the effects of nicotine on the osteogenic differentiation of hPDLCs during orthodontic tooth movement. This study aimed to investigate the effects and mechanisms of nicotine on the osteogenic differentiation of human periodontal ligament cells (hPDLCs) under the application of cyclic tensile stress. MATERIAL AND METHODS: hPDLCs were obtained from donor third molars. The hPDLCs were treated with nicotine and/or cyclic tensile stress that was applied with a cell stress plus unit. The effect of nicotine on cell viability was analyzed using the MTT assay. The osteogenic differentiation of hPDLCs was detected by alkaline phosphatase staining, Alizarin Red S staining, quantitative real-time polymerase chain reaction and western blotting. RESULTS: In combination with cyclic tensile stress, nicotine prevented the tensile stress-induced increase in alkaline phosphatase activity, formation of mineralization nodules and the upregulation of mRNA and protein expression of Runt-related transcription factor 2, transcription factor Sp7 and collagen type I; however, canonical Wnt pathway was activated. Furthermore, the addition of Dickkopf-related protein 1 and α-bungarotoxin counteracted the negative effect of nicotine and rescued the osteogenic differentiation of hPDLCs, respectively. CONCLUSION: These results indicate that nicotine prevents the increased osteogenic potential of hPDLCs induced by cyclic tensile stress by binding to an α7 nicotinic acetylcholine receptor and activating the canonical Wnt pathway.

Role of biomechanical forces in hyperfiltration-mediated glomerular injury in congenital anomalies of the kidney and urinary tract.

Congenital anomalies of the kidney and urinary tract (CAKUT) including solitary kidney constitute the main cause of progressive chronic kidney disease (CKD) in children. Children born with CAKUT develop signs of CKD only during adolescence and do not respond to renin-angiotensin-aldosterone system blockers. Early cellular changes underlying CKD progression to end-stage renal disease by early adulthood are not well understood. The mechanism of maladaptive hyperfiltration that occurs from loss of functional nephrons, including solitary kidney, is not clear. We re-examine the phenomenon of hyperfiltration in the context of biomechanical forces with special reference to glomerular podocytes. Capillary stretch exerts tensile stress on podocytes through the glomerular basement membrane. The flow of ultrafiltrate over the cell surface directly causes fluid flow shear stress (FFSS) on podocytes. FFSS on the podocyte surface increases 1.5- to 2-fold in animal models of solitary kidney and its effect on podocytes is a subject of ongoing research. Podocytes (i) are mechanosensitive to tensile and shear forces, (ii) use prostaglandin E2, angiotensin-II or nitric oxide for mechanoperception and (iii) use specific signaling pathways for mechanotransduction. We discuss (i) the nature of and differences in cellular responses to biomechanical forces, (ii) methods to study biomechanical forces and (iii) effects of biomechanical forces on podocytes and glomeruli. Future studies on FFSS will likely identify novel targets for strategies for early intervention to complement and strengthen the current regimen for treating children with CAKUT.

Hyperfiltration-associated biomechanical forces in glomerular injury and response: Potential role for eicosanoids.

Hyperfiltration is a well-known risk factor in progressive loss of renal function in chronic kidney disease (CKD) secondary to various diseases. A reduced number of functional nephrons due to congenital or acquired cause(s) results in hyperfiltration in the remnant kidney. Hyperfiltration-associated increase in biomechanical forces, namely pressure-induced tensile stress and fluid flow-induced shear stress (FFSS) determine cellular injury and response. We believe the current treatment of CKD yields limited success because it largely attenuates pressure-induced tensile stress changes but not the effect of FFSS on podocytes. Studies on glomerular podocytes, tubular epithelial cells and bone osteocytes provide evidence for a significant role of COX-2 generated PGE2 and its receptors in response to tensile stress and FFSS. Preliminary observations show increased urinary PGE2 in children born with a solitary kidney. FFSS-induced COX2-PGE2-EP2 signaling provides an opportunity to identify targets and, for developing novel agents to complement currently available treatment.

Cyclic tensile stress of human annulus fibrosus cells induces MAPK activation: involvement in proinflammatory gene expression.

OBJECTIVE: To study the role of mitogen-activated protein kinases (MAPKs) in human annulus fibrosus (AF) cells subjected to cyclic tensile stress (CTS). DESIGN: An in vitro system for CTS studies was established using AF cultures on fibronectin-coated silicone dishes. MAPK phosphorylation was studied by western analysis, while gene expression was followed by qRT-PCR. DNA synthesis was assessed by both tritiated thymidine incorporation and flow cytometry, and collagen synthesis using tritiated proline incorporation and the protease-free collagenase method. RESULTS: All three MAPKs studied, i.e., ERK, SAPK/JNK, and p38 were found to be phosphorylated immediately after CTS application within physiological range. A second wave of phosphorylation appeared at later time points. MAPK activation was elevated at higher CTS magnitudes, but independent of the frequency. CTS did not stimulate DNA synthesis neither extracellular matrix turnover, but it stimulated the proinflammatory genes, COX-2, IL-6, and IL-8. This stimulation was more intense at the highest magnitude (8%) tested and at the median frequency (1 Hz) and time interval (12 h). Blocking of ERK, SAPK/JNK, and p38 MAPK inhibited the CTS-induced stimulation of COX-2 and IL-8, while IL-6 expression was mediated only by SAPK/JNK and p38 MAPK. CONCLUSIONS: We have described for the first time the activation of MAPKs in human AF cells in response to CTS and showed that it drives an inflammatory reaction. These observations shed light on the mechanisms of intervertebral disc (IVD) cell responses to mechanical stress, contributing to the understanding of disc pathophysiology and possibly to the design of novel therapeutic interventions.

The weepy nerve-different sensitivity of left and right recurrent laryngeal nerves under tensile stress in a porcine model.

PURPOSE: Recurrent laryngeal nerve palsy in thyroid surgery is still a threatening complication. Our aim was to analyze the impact of prolonged tensile stress on the recurrent laryngeal nerve (RLN) in an animal model using continuous intraoperative neuromonitoring (C-IONM). METHODS: Constant tensile stress was applied to left and right RLNs in 20 pigs (40 RLN). In a pilot study, five animals were subjected to a tensile force of 0.34 ± 0.07 N for 10 min and changes in amplitude were documented using C-IONM. In the main study, a force of 1.2 N was applied until the signal amplitude was reduced by 85 %, in 15 pigs. Nerve conductivity was analyzed by threshold current measurements. RESULTS: Good correlation was found between stress and amplitude decrease in the pilot study as well as between signal decrease and duration of trauma in the main study. Great variations were found inter- and intra-individually. These variations were most prominent at 85 % signal reduction (median 36 min, range 0.3-171 min). There was no side specificity (left 0.3-171 min, right 0.3-168 min, respectively, p = 0.19). However, in each individual animal, there was a sensitive (0.3-98.9 min) and less sensitive nerve (26.8-171 min). These differences became highly significant at 85 % of signal reduction (p = 0.008), where the vulnerability is 1.4 to 146.4 times higher on one side (mean 4.3). CONCLUSIONS: Our study demonstrates the presence of a sensitive RLN that was 4.3 times more vulnerable than the contralateral nerve (range 1.4-146.4 times, p = 0.008). Thus, the right and the left nerves cannot be assumed to be of equal sensitivity to trauma. In our data, the more sensitive nerve does not occur predominantly on one side and was named the "weepy nerve."

Screening the Expression Changes in MicroRNAs and Their Target Genes in Mature Cementoblasts Stimulated with Cyclic Tensile Stress.

Cementum is a thin layer of cementoblast-produced mineralized tissue covering the root surfaces of teeth. Mechanical forces, which are produced during masticatory activity, play a paramount role in stimulating cementoblastogenesis, which thereby facilitates the maintenance, remodeling and integrity of cementum. However, hitherto, the extent to which a post-transcriptional modulation mechanism is involved in this process has rarely been reported. In this study, a mature murine cementoblast cell line OCCM-30 cells (immortalized osteocalcin positive cementoblasts) was cultured and subjected to cyclic tensile stress (0.5 Hz, 2000 µstrain). We showed that the cyclic tensile stress could not only rearrange the cell alignment, but also influence the proliferation in an S-shaped manner. Furthermore, cyclic tensile stress could significantly promote cementoblastogenesis-related genes, proteins and mineralized nodules. From the miRNA array analyses, we found that 60 and 103 miRNAs were significantly altered 6 and 18 h after the stimulation using cyclic tensile stress, respectively. Based on a literature review and bioinformatics analyses, we found that miR-146b-5p and its target gene Smad4 play an important role in this procedure. The upregulation of miR-146b-5p and downregulation of Smad4 induced by the tensile stress were further confirmed by qRT-PCR. The direct binding of miR-146b-5p to the three prime untranslated region (3' UTR) of Smad4 was established using a dual-luciferase reporter assay. Taken together, these results suggest an important involvement of miR-146b-5p and its target gene Smad4 in the cementoblastogenesis of mature cementoblasts.