The HINT1 Gene rs2526303 Polymorphism and Its Association with Personality Traits in Cigarette Smokers.

The development of a substance use disorder (SUD) is a multifaceted process influenced by both genetic and environmental factors. Recent research has suggested the potential involvement of the HINT1 gene in various aspects of plasticity, mood regulation, anxiety-like behaviour, and stress-coping mechanisms. Moreover, personality traits are also recognised to be instrumental in developing substance dependency. Given these considerations, our study investigated the associations among cigarette smoking, personality traits, and the rs2526303 polymorphism. Additionally, we investigated the interactions between personality traits and rs2526303 in the HINT1 gene. The study group comprised 531 volunteers: 375 cigarette users (mean age = 29.42 ± 10.72; F = 49%, M = 51%) and 156 never-smokers (mean age = 26.93 ± 10.09; F = 79%, M = 21%). Genotyping was conducted using the real-time PCR method, and the NEO Five-Factor Personality Inventory and State-Trait Anxiety Inventory were administered. There were no statistically significant differences in the frequency of rs2526303 genotypes and alleles in the cigarette user group compared to the control group. Compared to the control group, the cigarette users obtained higher scores in the assessment of the NEO-FFI Extraversion scale and lower results for the NEO-FFI Openness, Agreeableness, and Conscientiousness scales. Additionally, there was a statistically significant effect of rs2526303 genotype interaction and cigarette-using status on the conscientiousness scale. These outcomes collectively suggest a notable association between cigarette smoking and specific dimensions of personality, particularly highlighting differences in extraversion, openness, agreeableness, and conscientiousness. Furthermore, the detected interaction effect involving rs2526303 concerning conscientiousness signifies a complex interplay between genetic factors and smoking behaviour.

Three-dimensional microanalysis of tooth movement during the first 6 months of orthodontic double retention.

INTRODUCTION: This study performed a 3-dimensional analysis of tooth movement during orthodontic retention to assess the effectiveness of double retention (fixed and removable) in preventing undesired tooth movement. METHODS: One hundred randomly selected patients were included at the initiation of double orthodontic retention with fixed retainers and vacuum-formed splints (recommended to be worn 22 h/d) in both arches. Intraoral scans were performed directly (T0), 1 month (n = 88), 3 months (T2) (n = 78), and 6 months (T3) (n = 66) after retainer bonding. Nine reference points were marked on each tooth in every patient. Subsequent scans were superimposed, and point displacement was calculated. Statistical analysis was performed using the R statistical software (version 4.2.2; R Core Team, Vienna, Austria). RESULTS: Sample size calculation determined at least 55 patients were needed. The total dropout between T0 and T3 was 34 patients (did not show up for appointment). The median absolute displacement value of a single point between T0 and T3 was 0.015 mm. The most stable teeth were mandibular central incisors, whereas the least stable were mandibular molars. Most tooth displacements occurred between T0 and T2, then slowed down significantly. CONCLUSIONS: Double orthodontic retention prevents major tooth displacements in most patients during the first 6 months of retention; however, larger, unpredictable single-tooth displacement may occur in individual patients.

Orthodontic treatment demand for fixed treatment and aligners among young adults in middle Europe and South America - a questionnaire study.

BACKGROUND: Patients experiencing any malocclusion, may desire for treatment. However, there is no scientific information orthodontic treatment demand and the knowledge of young adults about orthodontic treatment. The aim of the study was to assess orthodontic treatment demand in young adults from Poland and Chile, their previous orthodontic experience and their knowledge on fixed and aligner orthodontic treatment. METHODS: The target group comprised people aged 18-30. The sample size was estimated as above 400 for each country. The survey was carried out in Polish and Spanish within 3 months and consisted of 25 questions delivered via social media. Comparisons were made between countries, age subgroups and gender. RESULTS: The response rate was 1,99%, what stands for 1092 responses, 670 from Chile and 422 from Poland, respectively. The percentage of young adults who were already treated was 42,9% in Poland and 25,0% in Chile. The ones planning to have orthodontic treatment within a year counted for 11,8% in Poland and 5,3% in Chile. Most young adults who want to be treated (20,6%) rely on doctor's recommendation on type of appliance while 14,7% of all respondents are interested solely in aligners. Most respondents have heard about aligners (58%). Direct provider-to-customer service without a doctor is not acceptable, neither in Poland (85,1%) nor in Chile (64,8%). Most young adults provided incorrect answers referring various aspects of aligner treatment. CONCLUSIONS: In both countries, patients demand to be treated and monitored by the orthodontist. A high percentage of patients want to be treated exclusively with aligners. Direct-to-consumer orthodontics does not seem attractive to patients. Young adults do not have adequate knowledge referring to aligner treatment. Many people want to be treated despite a previous orthodontic treatment.

FCN1 polymorphisms are not the markers of dental caries susceptibility in Polish children: A case-control study.

OBJECTIVE: To examine the association of four FCN1 SNPs: -542G>A (rs10120023), -144C>A (rs10117466), +6658C>T (rs148649884), and +7895A>G (rs150625869) with dental caries in Polish children. SUBJECTS AND METHODS: The study group consisted of 261 15-year-old Polish teenagers: 82 children with "higher" caries experience (having Decayed Missing Filled Teeth, DMFT >5) and 179 children with "lower" caries experience (having DMFT ≤5). Moreover, in additional comparison, a group of 229 children with caries experience (DMFT ≥1) was compared to a caries-free (DMFT =0) group of 32 children. Extraction of genomic DNA was performed from buccal swabs, and genotyping was performed by Real-Time PCR. RESULTS: FCN1 SNPs +6658C>T and +7895A>G appeared to be monomorphic in our sample. The genotype, allele, or haplotype distributions in FCN1 SNPs -542G>A and -144C>A in children with "higher" caries experience did not differ significantly from those in "lower" caries experience group. Similar results with no significant differences were demonstrated for subjects with DMFT ≥1 compared to subjects with DMFT =0. CONCLUSION: FCN1 SNPs are not the markers of dental caries susceptibility in Polish children.

Effect of air-polishing on surface roughness of composite dental restorative material - comparison of three different air-polishing powders.

BACKGROUND: Increased composite roughness enhances bacterial adhesion and discoloration, thus increasing the risk of gingival inflammation and secondary caries. Concerns about detrimental effects of sodium bicarbonate on surface roughness influenced the development of less abrasive powders: a glycine-based powder and an erythritol-based powder, additionally - sodium bicarbonate-based powder of reduced grain size. However, there is limited evidence on effects of these materials on the surface of dental fillings. The aim of the present study was to compare the effects of three air-polishing powders (of a reduced abrasiveness) on surface roughness of microhybrid restorative composite material. MATERIAL AND METHODS: Microhybrid light-cure resin composite samples were placed on 64 plaster cubes and light-cured through polyester strips. Surface roughness was measured using laser confocal microscope (magnification 2160x). The specimens were randomly divided into three groups (n = 20, 20 and 24) and air-polished with: sodium bicarbonate (40 µm), glycine (25 µm) and erythritol (14 µm), respectively. Then surface roughness was remeasured, keeping the same field of observation. Specialized 3D analysis software was used for data processing. Parameters according to ISO 25178: Sa, Sq, Sku, Sp, Sv, Sz, Ssk were used to describe surface roughness. RESULTS: Sa, Sq, Sp, Sv, Sz increased significantly following air polishing. Ssk was significantly higher, whereas Sku was significantly lower in sodium bicarbonate and erythritol groups than before air polishing. Comparison between the three powders revealed that Sa was significantly higher in sodium bicarbonate group than in glycine group. Sku was significantly higher in glycine and erythritol groups than in sodium bicarbonate group. CONCLUSIONS: Sodium bicarbonate has a stronger detrimental effect on composite surface than glycine or erythritol. No advantage of erythritol comparing to glycine could be found.

Panoramic radiographs and quantitative ultrasound of the radius and phalanx III to assess bone mineral status in postmenopausal women.

BACKGROUND: Various mandibular indices have been developed to detect osteoporosis on panoramic radiographs. Quantitative ultrasound (QUS) is a low-cost, radiation-free method to assess bone status. The aim of this study was to compare mandibular morphometric analysis and QUS at the radius and proximal phalanx III finger. METHODS: The study involved 97 postmenopausal women, aged 48.5-71.5y (mean: 55.4). Mandibular morphometric analysis comprised: distance between upper and lower mandibular borders just behind the mental foramen (H), distance: mental foramen - inferior mandibular cortex (IM) and mandibular cortical width at the mental region (MCW). Then, ratios were calculated: MCW/IM = PMI (panoramic mandibular index), H/IM = MR (mandibular ratio). Mandibular cortical index (MCI) was used to classify the morphology of the mandibular cortex. Bone mineral status assessed using QUS at the radius and proximal phalanx III finger was compared to population mean apical bone mass (T-score). Linear regression analysis was used for correlations between continuous variables, Pearson's correlation coefficient r - for variables of normal distribution. Student's t-test was used to compare variables of normal distribution and for the latter - Mann-Whitney U-test. The level of significance was p < 0.05. RESULTS: Mandibular height was 13.42-34.42 mm. The mean mandibular cortical width was 3.31 mm. Mean values of PMI and MR were 0.33 and 2.57, respectively. Higher mean value of Ad-SoS was found in the radius than in the III finger. Phalanx T-score values ​​were lower than those of the radius. T-score of the radius was < - 1.0 in 22 patients, indicating osteopenia. Basing on phalanx T-score, osteopenia was found in 39 patients. Category C1 of Mandibular Cortical Index was found in 48 women, C2 - in 37 women and C3 - in 12 women. Higher scores of Mandibular Cortical Index were recorded in older women. MCI significantly correlated with the skeletal status (p = 0.01) as well as with H, MCW and MR. Phalanx T-score was not correlated to PMI, MR or MCW. CONCLUSIONS: 1. Mandibular Cortical Index can be used as a screening tool for detecting osteoporosis. 2. Quantitative ultrasound at the phalanx III constitutes a reliable way of assessing bone status.

DD Genotype of ACE I/D Polymorphism Might Confer Protection against Dental Caries in Polish Children.

The aim of the study was to examine the frequencies of the genotypes and alleles of ACE insertion/deletion (I/D) polymorphism and their association with dental caries in a sample of Polish children. The study subjects were 120 children with dental caries experience (cases) and 41 caries-free individuals (controls). The genotyping was performed using polymerase chain reaction. The genotype distributions of ACE I/D polymorphism were not statistically different between carious and control children. However, we found a borderline overrepresentation of the II + ID genotypes versus the DD genotype in the carious compared to the control group (69.2% and 51.2%, respectively, p = 0.057). Logistic regression analysis adjusted for age and sex revealed that I allele carriage was a significant predictor of dental caries susceptibility (OR = 2.14, 95% CI = 1.02-4.49, p = 0.041). In conclusion, the DD genotype of ACE I/D polymorphism might be protective against dental caries in Polish children.

Three-dimensional analysis of enamel surface alteration resulting from orthodontic clean-up -comparison of three different tools.

BACKGROUND: The present study aimed at 3D analysis of adhesive remnants and enamel loss following the debonding of orthodontic molar tubes and orthodontic clean-up to assess the effectiveness and safety of One-Step Finisher and Polisher and Adhesive Residue Remover in comparison to tungsten carbide bur. MATERIALS AND METHODS: Thirty human molars were bonded with chemical-cure orthodontic adhesive (Unite, 3M, USA), stored 24 h in 0.9 % saline solution, debonded and cleaned using three methods (Three groups of ten): tungsten carbide bur (Dentaurum, Pforzheim, Germany), one-step finisher and polisher (One gloss, Shofu Dental, Kyoto, Japan) and Adhesive Residue Remover (Dentaurum, Pforzheim, Germany). Direct 3D scanning in blue-light technology to the nearest 2 µm was performed before etching and after adhesive removal. Adhesive remnant height and volume as well as enamel loss depth and volume were calculated. An index of effectiveness and safety was proposed and calculated for every tool; adhesive remnant volume and duplicated enamel lost volume were divided by a sum of multiplicands. Comparisons using parametric ANOVA or nonparametric ANOVA rank Kruskal-Wallis tests were used to compare between tools for adhesive remnant height and volume, enamel loss depth and volume as well as for the proposed index. RESULTS: No statistically significant differences in the volume (p = 0.35) or mean height (p = 0.24) of adhesive remnants were found (ANOVA rank Kruskal-Wallis test) between the groups of teeth cleaned using different tools. Mean volume of enamel loss was 2.159 mm(3) for tungsten carbide bur, 1.366 mm(3) for Shofu One Gloss and 0.659 mm(3) for Adhesive Residue Remover - (F = 2.816, p = 0.0078). A comparison of the proposed new index between tools revealed highly statistically significant differences (p = 0.0081), supporting the best value for Adhesive Residue Remover and the worst - for tungsten carbide bur. CONCLUSIONS: The evaluated tools were all characterized by similar effectiveness. The most destructive tool with regards to enamel was the tungsten carbide bur, and the least was Adhesive Residue Removal.

Effect of orthodontic debonding and adhesive removal on the enamel - current knowledge and future perspectives - a systematic review.

After orthodontic treatment, brackets are debonded and residual adhesive is removed, causing iatrogenic enamel damage. The aim of this study was to review the methods of orthodontic adhesive removal, find clear evidence, and provide a rationale for this procedure. A literature search was performed in PubMed, Dentistry and Oral Sciences, Scopus, Cochrane, Google, and Google Scholar using keywords: orthodontic adhesive removal, orthodontic debonding, orthodontic clean-up. Studies concerning human enamel roughness or loss from debonding and adhesive removal were considered. Forty-four full-text articles were analyzed and 3 were rejected after detailed reading; finally 41 papers were included. Fifteen qualitative studies, 13 studies based on indices of enamel surface, and 13 quantitative studies were found. No meta-analysis could be performed due to a lack of homogenous quantitative evidence. The most popular tools were tungsten carbide burs, which were faster and more effective than Sof-Lex discs, ultrasonic tools, hand instruments, rubbers, or composite burs. They remove a substantial layer of enamel and roughen its surface, but are less destructive than Arkansas stones, green stones, diamond burs, steel burs, and lasers. Multi-step Sof-Lex discs and pumice slurry are the most predictable enamel polishing tools. Arkansas stones, green stones, diamond burs, steel burs, and lasers should not be used for adhesive removal. The use of tungsten carbide bur requires multistep polishing. Further efforts should be made to find tools and methods for complete removal of adhesive remnants, minimizing enamel loss and achieving a smooth surface.

The Significance of Keratinized Mucosa in Implant Therapy: Narrative Literature Review and Case Report Presentation.

Background/Objectives: Implant treatment in patients who require teeth extraction due to periodontitis presents a significant challenge. The consideration of peri-implantitis is crucial when planning the placement of dental implants. The predictability of implant treatment relies on the suitability of both hard and soft tissue quality. The aim of this article is to present a case report demonstrating a secure treatment protocol for implant procedures in patients with periodontitis requiring the extraction of all teeth, soft tissue management targeted at increasing the keratinized mucosa zone, and the provision of a reliable prosthetic solution. The secondary objective is to review the relevant literature regarding the significance of keratinized mucosa surrounding dental implants and its association with the occurrence of peri-implantitis. Case presentation: A 65-year-old female with generalized periodontitis, stage IV grade C and very poor oral hygiene came for treatment and rehabilitation of the lower jaw. CBCT revealed periodontal lesions and labio-lingual ridge dimensions in the region of teeth 34-44 from 8.0 to 10.2 mm. The first surgery included teeth extraction and periodontal lesions enucleation with simultaneous placement of four implants in the positions of teeth 32, 34, 42, 44. The second-stage surgery involved increasing the keratinized mucosa using two free gingival grafts. Conclusions: The present case report described the treatment process of the patient with periodontitis, including immediate implantation in the infected region, soft tissue augmentation using free gingival grafts and the ultimate placement of a bar-retained overdenture for final restoration. After two years of observation, despite questionable hygiene, no symptoms of gingival inflammation were detected. Furthermore, there is limited information in the literature regarding the correlation between inadequate keratinized gingiva and the occurrence of peri-implantitis.

Noise-Optimized CBCT Imaging of Temporomandibular Joints-The Impact of AI on Image Quality.

Background: Temporomandibular joint disorder (TMD) is a common medical condition. Cone beam computed tomography (CBCT) is effective in assessing TMD-related bone changes, but image noise may impair diagnosis. Emerging deep learning reconstruction algorithms (DLRs) could minimize noise and improve CBCT image clarity. This study compares standard and deep learning-enhanced CBCT images for image quality in detecting osteoarthritis-related degeneration in TMJs (temporomandibular joints). This study analyzed CBCT images of patients with suspected temporomandibular joint degenerative joint disease (TMJ DJD). Methods: The DLM reconstructions were performed with ClariCT.AI software. Image quality was evaluated objectively via CNR in target areas and subjectively by two experts using a five-point scale. Both readers also assessed TMJ DJD lesions. The study involved 50 patients with a mean age of 28.29 years. Results: Objective analysis revealed a significantly better image quality in DLM reconstructions (CNR levels; p < 0.001). Subjective assessment showed high inter-reader agreement (κ = 0.805) but no significant difference in image quality between the reconstruction types (p = 0.055). Lesion counts were not significantly correlated with the reconstruction type (p > 0.05). Conclusions: The analyzed DLM reconstruction notably enhanced the objective image quality in TMJ CBCT images but did not significantly alter the subjective quality or DJD lesion diagnosis. However, the readers favored DLM images, indicating the potential for better TMD diagnosis with CBCT, meriting more study.

A Clinician's Perspective on the Accuracy of the Shade Determination of Dental Ceramics-A Systematic Review.

BACKGROUND: No systematic review or meta-analysis has been identified that provides a clinician's perspective on the shade selection process for ceramic restorations. The aim of the present systematic review is to find and systematize the available knowledge by referring to the methods to assess the color of dental ceramics. METHODS: The final search was performed on 10 December 2023 in six search engines. The keywords used in the search strategy were as follows: ("color matching" OR "shade matching" OR "color measurement" AND "porcelain" OR "dental ceramics") AND "dentistry" AND "accuracy". RESULTS: The search strategy identified 139 potential articles. After the screening process, sixteen articles were included in the review. CONCLUSIONS: In conclusion, the most common method, the visual method, has lower accuracy and repeatability. Devices like spectrophotometers and colorimeters provide precise, repeatable, and objective measurements, but fail to be widely applied in everyday clinical practice. Clinicians should not rely solely on their senses for shade determination, but should turn to quantitative methods. Colorimetric devices connected to mobile applications are an interesting and useful tool. Software and apps based on artificial intelligence are emerging as promising tools, but they require further research.

Skeletal facial asymmetry: reliability of manual and artificial intelligence-driven analysis.

OBJECTIVES: To compare artificial intelligence (AI)-driven web-based platform and manual measurements for analysing facial asymmetry in craniofacial CT examinations. METHODS: The study included 95 craniofacial CT scans from patients aged 18-30 years. The degree of asymmetry was measured based on AI platform-predefined anatomical landmarks: sella (S), condylion (Co), anterior nasal spine (ANS), and menton (Me). The concordance between the results of automatic asymmetry reports and manual linear 3D measurements was calculated. The asymmetry rate (AR) indicator was determined for both automatic and manual measurements, and the concordance between them was calculated. The repeatability of manual measurements in 20 randomly selected subjects was assessed. The concordance of measurements of quantitative variables was assessed with interclass correlation coefficient (ICC) according to the Shrout and Fleiss classification. RESULTS: Erroneous AI tracings were found in 16.8% of cases, reducing the analysed cases to 79. The agreement between automatic and manual asymmetry measurements was very low (ICC < 0.3). A lack of agreement between AI and manual AR analysis (ICC type 3 = 0) was found. The repeatability of manual measurements and AR calculations showed excellent correlation (ICC type 2 > 0.947). CONCLUSIONS: The results indicate that the rate of tracing errors and lack of agreement with manual AR analysis make it impossible to use the tested AI platform to assess the degree of facial asymmetry.

Periapical Lesions in Panoramic Radiography and CBCT Imaging-Assessment of AI's Diagnostic Accuracy.

Background/Objectives: Periapical lesions (PLs) are frequently detected in dental radiology. Accurate diagnosis of these lesions is essential for proper treatment planning. Imaging techniques such as orthopantomogram (OPG) and cone-beam CT (CBCT) imaging are used to identify PLs. The aim of this study was to assess the diagnostic accuracy of artificial intelligence (AI) software Diagnocat for PL detection in OPG and CBCT images. Methods: The study included 49 patients, totaling 1223 teeth. Both OPG and CBCT images were analyzed by AI software and by three experienced clinicians. All the images were obtained in one patient cohort, and findings were compared to the consensus of human readers using CBCT. The AI's diagnostic accuracy was compared to a reference method, calculating sensitivity, specificity, accuracy, positive predictive value (PPV), negative predictive value (NPV), and F1 score. Results: The AI's sensitivity for OPG images was 33.33% with an F1 score of 32.73%. For CBCT images, the AI's sensitivity was 77.78% with an F1 score of 84.00%. The AI's specificity was over 98% for both OPG and CBCT images. Conclusions: The AI demonstrated high sensitivity and high specificity in detecting PLs in CBCT images but lower sensitivity in OPG images.

AI in Orthodontics: Revolutionizing Diagnostics and Treatment Planning-A Comprehensive Review.

The advent of artificial intelligence (AI) in medicine has transformed various medical specialties, including orthodontics. AI has shown promising results in enhancing the accuracy of diagnoses, treatment planning, and predicting treatment outcomes. Its usage in orthodontic practices worldwide has increased with the availability of various AI applications and tools. This review explores the principles of AI, its applications in orthodontics, and its implementation in clinical practice. A comprehensive literature review was conducted, focusing on AI applications in dental diagnostics, cephalometric evaluation, skeletal age determination, temporomandibular joint (TMJ) evaluation, decision making, and patient telemonitoring. Due to study heterogeneity, no meta-analysis was possible. AI has demonstrated high efficacy in all these areas, but variations in performance and the need for manual supervision suggest caution in clinical settings. The complexity and unpredictability of AI algorithms call for cautious implementation and regular manual validation. Continuous AI learning, proper governance, and addressing privacy and ethical concerns are crucial for successful integration into orthodontic practice.

Tooth Colour and Facial Attractiveness: Study Protocol for Self-Perception with a Gender-Based Approach.

(1) Background. The aim of the present protocol is to assess whether self-perception of tooth colour and facial attractiveness correlates with gender and mood state. (2) Study protocol. The protocol foresees a cross-sectional clinical study, developed by Sapienza University of Rome, Italy, Department of Oral and MaxilloFacial Sciences, and 15 UNID (Unione Nazionale Igienisti Dentali-National Union of Dental Hygienists)-affiliated clinical centers in Italy. The protocol consists of a clinical visit, during which photographic documentation of the face and smile is collected with spectrophotometric evaluation of tooth colour. During the visit, two validated questionnaires are filled in. The first one is filled by the operator for the collection of data on: i) patient's face and smile colorimetric characteristics; ii) patient's and operator's evaluations of the dental colour and smile attractiveness. The second one is completed by the patient for the assessment of his/her mood state. (3) Conclusions. This protocol highlights the importance in aesthetic dentistry of a gender-specific approach and the limitations of gender-neutral models, revealing the existing gender differences in aesthetic self-perception. In addition, the colour-matching relationships between facial and dental colour characteristics will be explored. This approach improves the accuracy and personalization of aesthetic assessments in dentistry, by addressing personalized and gender-specific needs. A gender-inclusive methodology that takes a more nuanced and culturally aware approach to aesthetic dentistry is a useful adjunct to modern clinical practices.

Association of Three Genetic Loci with Molar Incisor Hypomineralization in Polish Children.

BACKGROUND: Molar incisor hypomineralization (MIH) is a qualitative, demarcated enamel defect of hypomineralization affecting one to four first permanent molars, often with incisor involvement. Its etiology is complex. However, evidence suggests the influence of genetic factors, potentially including the single nucleotide polymorphisms (SNPs) rs2889956, rs4811117 and rs13058467, which were previously linked to MIH in a genome-wide association study of German children. The aim was to replicate analyses of possible associations between the SNPs and molar incisor hypomineralization in Polish children. METHODS: The final study group consisted of 778 children aged 126-168 months old. Saliva samples were taken, and genomic DNA was extracted and genotyped using beadchip microarrays. RESULTS: Among the 778 subjects, there were 68 (8.7%) subjects with MIH and 710 (91.3%) subjects without MIH. There were no significant differences in distributions in age, sex, or the frequency of caries in permanent dentition between the MIH and non-MIH groups. The rs2889956, rs4811117, and rs13058467 genotype distributions in the studied group conformed to the expected Hardy-Weinberg equilibria, and there were no significant differences in the distributions of their alleles or genotypes between the MIH and non-MIH groups. CONCLUSION: Our replication study did not confirm highly significant associations between the single nucleotide polymorphisms rs2889956, rs4811117, and rs13058467 with molar incisor hypomineralization in Polish children.

Morphological Variations and Anomalies of the Sella Turcica on Lateral Cephalograms of Cleft-Palate-Only (CPO) Patients.

Sella turcica abnormalities were reported in malocclusions and clefts. No studies were found on sella turcica abnormalities in CPO patients. This study aimed to compare the prevalence of sella turcica abnormalities on cephalometric radiographs in CPO versus non-cleft orthodontic patients. Cephalograms of CPO patients (n = 89) and controls (n = 89) were analyzed for normal sella turcicae and sella turcica abnormalities. Then, cephalometric analysis was performed using specialized software. Statistical analysis was performed using the Rv.4.1.1 package. No variation in or anomaly of the sella turcica was more frequent in CPO compared to non-cleft individuals. Patients with hypertrophic posterior clinoid process had higher interincisal and 1+:Nasion-A angles. Subjects with hypertrophic posterior clinoid process and double contour of the floor had higher Sella-Nasion-A, Sella-Nasion-B and Sella-Nasion-Pogonion and lower ANB. A pyramidal shape of the dorsum sellae was more prevalent in males, as was double contour of the floor in females. Subjects with an oblique anterior wall had lower SNB, GntgoAr and NLA. Subjects with a normal sella had higher SNPg, ML-NSL and 1+:NAmm. A normal sella was more prevalent in younger patients. CPO is not associated with sella turcica abnormalities compared to non-cleft orthodontic patients.

Craniofacial Cephalometric Morphology in Caucasian Adult Patients with Cleft Palate Only (CPO).

Orofacial clefts are common birth defects that affect the morphology of the skull. Cleft palate only (CPO) has a different etiology than other types of clefts, and craniofacial morphology in CPO differs from that of UCLP and BCLP. The long-term effect of the cleft and its surgery is visible after growth cessation. However, few studies exist describing cephalometric craniofacial morphology in adults with CPO. The aim of the present study was to describe the cephalometric craniofacial morphology of adult patients with CPO compared to healthy patients. The study included analysis of cephalometric lateral headfilms of 28 adults with CPO and 28 healthy subjects. It was found that the angles of SNA, ANB, 1-:NB angle (°) and Wits appraisal were significantly smaller in CPO, whereas NL-NSL (°), 1+:NA angle (°) and 1+:NA (mm) had significantly higher values in CPO compared to the control group. It has been concluded that CPO in adult patients is characterized by a sagittal jaw discrepancy due to maxillary deficiency, with a tendency for compensatory inclination of the upper and lower incisors.

Influence of Shortened Tongue Frenulum on Tongue Mobility, Speech and Occlusion.

(1) Background: The incidence of ankyloglossia is 0.02-10.7%. Its effect on selected dysfunctions has been described; however, no studies report its impact on several disorders in a group of subjects. The aim of this study was to assess the effect of ankyloglossia on swallowing, speech, occlusion and periodontium. (2) Methods: The study group consisted of 86 patients with ankyloglossia, and the control group (n = 86) had a normal tongue frenulum. Type of swallowing, tongue mobility, speech, occlusion and periodontium were assessed. (3) Results: Ankyloglossia pertained to 75.6% patients with infantile swallowing and 41.3% patients with mature swallowing. Limited tongue mobility was found in 29.4% subjects with moderate ankyloglossia and 70.6% subjects with severe ankyloglossia. All subjects with mild ankyloglossia and all the controls had normal tongue mobility. The relationship between dysglossia and ankyloglossia severity was statistically significant. Malocclusion or crowding was diagnosed in 62% subjects with ankyloglossia and 21.6% subjects in the control group. No periodontal abnormalities were found in any subject. (4) Conclusions: (1) A short tongue frenulum negatively influences swallowing and is associated with an "infantile swallowing pattern". (2) Moderate or severe ankyloglossia significantly limits tongue mobility. (3) A short tongue frenulum negatively influences speech. (4) Ankyloglossia is associated with higher prevalence of malocclusion.