Porous Molybdenum Compound Design for Strong Microwave Absorption.

Exploring highly efficient microwave absorption (MA) materials with a facile preparation method is of great significance for tackling electromagnetic pollution and remains a challenge. Herein, ternary MoO2/Mo2C/Mo2N composites with porous structures are fabricated by a simple precursor pyrolysis process. The unique structure and multiple components, which could generate sufficient heterogeneous interfaces, are conducive to improve impedance matching, trigger polarization loss, and strengthen conduction loss. Profiting from the synergistic effect of multiple dissipation mechanisms, the composites exhibit exceedingly good MA performance. The minimum reflection loss value reaches -38.0 dB at 10.4 GHz when the thickness is 2.0 mm, and the maximum effective absorbing bandwidth is 4.11 GHz ranged from 12.41 to 16.52 GHz when the thickness is 1.5 mm. These strategies pave opportunities for rational design of Mo-related composites for high-efficiency electromagnetic-wave absorption performance.

Exciton-polariton light-emitting diode based on a single ZnO superlattice microwire heterojunction with performance enhanced by Rh nanostructures.

One-dimensional (1D) wirelike superlattice micro/nanostructures have received considerable attention for potential applications due to their versatility and capability for modulating optical and electrical characteristics. In this study, 1D superlattice microwires (MWs), which are made of undoped ZnO and Ga-doped ZnO with periodic and alternating crystalline layers (ZnO/ZnO:Ga), were synthesized individually. Under optical excitation, a series of resonance peaks in the photoluminescence spectrum can be ascribed to polariton emission, which originates from the coupling interaction of the 1D photonic crystal and confined excitons along the wire direction. Using a p-type GaN layer as the hole transport layer, a kind of waveguide light source based on an individual ZnO/ZnO:Ga superlattice MW was proposed and constructed. By analysing the spatially resolved electroluminescence spectra, the observed multipeak was ascribed to exciton-polariton emission with a vacuum Rabi splitting of about 275 meV. Cladding with Rh nanostructures gives rise to appropriate ultraviolet plasmons, and the Rabi splitting energy of our device was enhanced up to 413 meV. The exciton-polariton properties were further examined using angle-resolved electroluminescence measurements. Therefore, individual superlattice MWs can act as optical microresonators to achieve photon-exciton coupling with a large Rabi splitting energy. The experimental results indicate that an individual ZnO/ZnO:Ga superlattice MW can be generally used in developing exciton-polariton luminescence/lasing light sources, particularly for constructing low-threshold/thresholdless lasers toward pragmatic applications.

Plasmonic and catalytic Au NBP@AgPd nanoframes for highly efficient photocatalytic reactions.

Heterogeneous metal nanostructures with excellent plasmonic performance and catalytic activity are urgently needed to realize efficient light-driven catalysis. Herein, we demonstrate the preparation of hollow Au nanobipyramid (NBP)@AgPd nanostructures by employing Au NBP@Ag nanorods as templates. The products could transform from Au NBP@AgPd nanoframes to nanocages, along with the redshift and broadening of the plasmon wavelength. Particularly, the plasmon intensity of these nanostructures remained considerable among the shape evolution process. Based on the selective absorption of CTAB, the Ag atoms on the side surfaces of the Au NBP@Ag nanorods were employed as the sacrificial templates to reduce Pd atoms through galvanic replacement. The reduced Pd and Ag atoms produced through the reduction reaction were preferably co-deposited on the corners and edges at the early stage and later deposited directly on the defect sites of the side facets, as more Ag atoms were released. The discontinued distribution of the Pd atoms gives an opportunity to etch away the Ag atoms in the cores, leading to the formation of hollow Au NBP@AgPd nanostructures after the etching process. It is worth noting that the deposition of the ultrathin AgPd nanoframe had little influence on the plasmonic properties of Au NBPs, as verified by electrodynamic simulations. The Au NBP@AgPd nanoframe showed great photocatalytic activity toward Suzuki coupling reactions under laser irradiation. Taken together, these results suggest that the hot electrons successfully transfer from Au NBP to the AgPd nanoframes to participate in the photocatalytic reactions. This study affords a promising route for the synthesis of anisotropic bimetallic nanostructures with excellent plasmonic performances.

Same effect of biquadratic exchange interaction and Heisenberg linear interaction in a spin spiral.

Monolayer (ML) NiCl2 exhibits a strong biquadratic exchange interaction between the first neighboring magnetic atoms (B1), as demonstrated by the spin spiral model in J. Ni et al., Phys. Rev. Lett., 2021, 127, 247204. This interaction is crucial for stabilizing the ferromagnetic collinear order within the ML NiCl2. However, they neither point out the role of B1 nor discuss the dispersion relation from spin orbit coupling (SOC) in the spin spiral. As we have done in this work, these parameters might theoretically potentially be derived directly by fitting the calculated spin spiral dispersion relation. Here, we draw attention to the fact that B1 is equivalent to half of J3 in Heisenberg linear interactions and that the positive B1 partially counteracts the negative J3's impact on the spin spiral to make the ML NiCl2 ferromagnetic. The comparatively small J3 + 1/2B1 from the spin spiral led us to believe that J3 could be substituted by B1, yet it still exists and plays a crucial function in magnetic semiconductors or insulators. The dispersion relation, which we also obtain from SOC, displays weak antiferromagnetic behavior in the spin spiral.

Electrically driven whispering-gallery-mode microlasers in an n-MgO@ZnO:Ga microwire/p-GaN heterojunction.

In emerging miniaturized applications, semiconductor micro/nanostructures laser devices have drawn great public attentions of late years. The device performances of micro/nanostructured microlasers are highly restricted to the different reflective conditions at various side surfaces of microresonators and junction interface quality. In this study, an electrically driven whispering-gallery-mode (WGM) microlaser composed of a Ga-doped ZnO microwire covered by a MgO layer (MgO@ZnO:Ga MW) and a p-type GaN substrate is illustrated experimentally. Incorporating a MgO layer on the side surfaces of ZnO:Ga MWs can be used to reduce light leakage along the sharp edges and the ZnO:Ga/GaN interface. This buffer layer incorporation also enables engineering the energy band alignment of n-ZnO:Ga/p-GaN heterojunction and manipulating the current transport properties. The as-constructed n-MgO@ZnO:Ga MW/p-GaN heterojunction device can emit at an ultraviolet wavelength of 375.5 nm and a linewidth of about 25.5 nm, achieving the excitonic-related recombination in the ZnO:Ga MW. The broadband spectrum collapsed into a series of sharp peaks upon continuous-wave (CW) operation of electrical pumping, especially for operating current above 15.2 mA. The dominant emission line was centered at 378.5 nm, and the line width narrowed to approximately 0.95 nm. These sharp peaks emerged from the spontaneous emission spectrum and had an average spacing of approximately 5.5 nm, following the WGM cavity modes. The results highlight the significance of interfacial engineering for optimizing the performance of low-dimensional heterostructured devices and shed light on developing future miniaturized microlasers.

Numerical investigation of plasmon sensitivity and surface-enhanced Raman scattering enhancement of individual TiN nanosphere multimers.

Titanium nitride (TiN) nanoparticles have recently been considered as potential candidate plasmonic materials; such materials support localized surface plasmon resonances (LSPRs) and show excellent thermal stability with a high melting point. The electromagnetic (EM) field coupling and gap distance between components of individual TiN nanosphere multimers are critical parameters affecting their plasmonic sensitivity and surface-enhanced Raman scattering (SERS) performance, both of which are numerically investigated by the finite element method. It is demonstrated that the fractional shifts of both the dipolar LSPR wavelength [Formula: see text] and the refractive index sensitivity factor S follow the universal 'plasmon ruler' behavior, which is explained well in terms of EM field distribution. The response of the obtained S to [Formula: see text] is also presented and elucidated in terms of the optical response of the dielectric constants of TiN. The maximum S and SERS enhancement (excited by three normally available lasers in experiments) are also predicted; both are comparable to the values for Au dimeric nanoparticles. The present work holds great promise for the development of non-noble metal plasmonic materials in both SERS and plasmonic sensing applications.

Optimal geometry parameter for plasmonic sensitivities of individual Au nanopoarticle sensors.

The shape, aspect ratio and size are key parameters governing the plasmon sensitivities of individual Au nanoparticle bio/chemical sensors. It is crucial to unveil the general geometry parameters to optimize their corresponding sensitivity applications. In this work, the geometry-dependent refractive-index sensitivity factor (S) and figure of merit (FOM) of individual Au nanoparticle sensors (including a nanodisc, nanorod, nanoellipsoid and hexagonal nanoplate) are numerically investigated by discrete dipole approximation (DDA). S is revealed to increase quadratically/linearly with aspect ratio, while FOM reaches a maximum at an optimized aspect ratio of about 3.0/8.0 for the studied prolate/oblate nanoparticles, respectively, reflecting their shapes and aspect ratios and, hence, their size effects. However, their responses to shape factors are shown to follow nearly the same trend regardless of their different detailed geometries, demonstrating that their shape factors provide the general geometry parameters governing the plasmon sensitivities of the concerned individual Au nanoparticle sensors. This can be analytically explained well under dipolar localized surface plasmon resonance (LSPR) conditions. Their optimal FOM is predicted to be about 12.5 RIU-1 at a shape factor of 10.5; the underlying reason for this is analytically discussed as well. The obtained results in this work are believed to hold great promise for choosing appropriate nanoparticle geometry parameters for individual Au nanoparticle LSPR-based bio/chemical sensor design and applications as well as to access the corresponding optimal geometry parameters and FOM simultaneously.

The role of Sn in enhancing the visible-light photocatalytic activity of hollow hierarchical microspheres of the Bi/BiOBr heterojunction.

Hollow hierarchical microspheres of Bi/BiOBr (SBB) with oxygen vacancies were prepared using a one step solvothermal method. It was found that the stannous chloride dihydrate played key roles in the formation of Bi, defects and the stacking mode of hierarchical construction units. Positron annihilation lifetime spectroscopy (PALS) was used to demonstrate the oxygen vacancies in Bi/BiOBr samples. The density of states (DOS) of the valence band of BiOBr can be modulated by the introduction of oxygen vacancies according to the valence band XPS and Density Functional Theory (DFT) calculations. Analyses of photoluminescence and BET demonstrated that SBB hollow hierarchical microspheres with higher specific surface area have a lower recombination rate of photo-generated electrons and holes. The photocatalytic and adsorptive performances showed that the samples exhibited stronger adsorption capacity toward rhodamine B (RhB) and highly efficient photocatalytic activity in the degradation of RhB, which were attributed to the higher adsorption ability and synergistic effect of oxygen vacancies and construction of the heterojunction structure (Bi/BiOBr).

An Effective Modification Strategy to Build Multifunctional Peptides Based on a Trypsin Inhibitory Peptide of the Kunitz Family.

Peptides with antimicrobial activity or protease inhibitory activity are potential candidates to supplement traditional antibiotics or cancer chemotherapies. However, the potential of many peptides are limited by drawbacks such as cytotoxicity or susceptibility to hydrolysis. Therefore, strategies to modify the structure of promising peptides may represent an effective approach for developing more promising clinical candidates. In this study, the mature peptide OSTI-1949, a Kunitz-type inhibitor from Odorrana schmackeri, and four designed analogues were successfully synthesised. In contrast to the parent peptide, the analogues showed impressive multi-functionality including antimicrobial, anticancer, and trypsin inhibitory activities. In terms of safety, there were no obvious changes observed in the haemolytic activity at the highest tested concentration, and the analogue OSTI-2461 showed an increase in activity against cancer cell lines without cytotoxicity to normal cells (HaCaT). In summary, through structural modification of a natural Kunitz-type peptide, the biological activity of analogues was improved whilst retaining low cytotoxicity. The strategy of helicity enhancement by forming an artificial α-helix and ß-sheet structure provides a promising way to develop original bioactive peptides for clinical therapeutics.

Strain-engineering of band gaps in piezoelectric boron nitride nanoribbons.

Two-dimensional atomic sheets such as graphene and boron nitride monolayers represent a new class of nanostructured materials for a variety of applications. However, the intrinsic electronic structure of graphene and h-BN atomic sheets limits their direct application in electronic devices. By first-principles density functional theory calculations we demonstrate that band gap of zigzag BN nanoribbons can be significantly tuned under uniaxial tensile strain. The unexpected sensitivity of band gap results from reduced orbital hybridization upon elastic strain. Furthermore, sizable dipole moment and piezoelectric effect are found in these ribbons owing to structural asymmetry and hydrogen passivation. This will offer new opportunities to optimize two-dimensional nanoribbons for applications such as electronic, piezoelectric, photovoltaic, and opto-electronic devices.

Template-directed growth of Ag nanostructures: soft templates versus hard templates.

Hard template-directed growth methods present a compelling route for the synthesis of Ag nanostructures with precise size control. Meanwhile, soft template methods are effective and flexible for the synthesis of Ag nanostructures with various morphologies. However, the role of the soft template is ambiguous and obviously neglected in hard template-directed growth processes due to the strong confinement effect of the hard template, limiting the diversity of Ag nanostructures that can be obtained. Herein, we design Au nanoframes with deformable head structures as a hard template while using cetyltrimethylammonium chloride as a soft template, to direct the growth of Ag atoms on Au nanobipyramid seeds. When using the Au nanoframes with a closed head, the longitudinal growth of the Ag atoms is clearly limited by the hard template, leading to the formation of thick Ag nanorods with a five-fold twinned structure. The soft template starts to influence the growth process when the head structure of the Au nanoframes becomes hollow. In particular, the confinement effect of the hard template can be completely broken by selectively strengthening the role of the soft template, promoting the production of slender Ag nanorods similar to the results obtained in the absence of the hard template. Our results indicate that the morphology of the Ag nanostructures depends on the competition between the qualitatively confined energies of the hard and soft templates during the template-directed growth process. Moreover, this confined growth mechanism is also verified by the successful construction of various Ag nanostructures. The understanding of the collaborative competition mechanism between the soft and hard templates presents a great opportunity to construct novel Ag nanostructures through a template-directed method.

Enhancing UV photodetection performance of an individual ZnO microwire p-n homojunction via interfacial engineering.

As a typical broad bandgap semiconductor, ZnO has received considerable attention for developing optoelectronic devices in ultraviolet wavelengths, but suffers from a lack of high-quality single-crystalline p-type ZnO. Herein, we report the realization of a homojunction ultraviolet photodetector, which involves a p-type Sb-doped ZnO microwire (ZnO:Sb MW) and n-type ZnO layer. The p-type conductivity of the as-synthesized ZnO:Sb MWs was evidenced using an individual wire field-effect transistor. Due to its good rectifying ability and excellent photovoltaic effect, the constructed p-ZnO:Sb MW/n-ZnO homojunction is able to work as an ultraviolet photodetector in self-biased and reversely biased manners. By appropriately engineering the band alignment of the p-ZnO:Sb/n-ZnO homojunction via a MgO interface modification layer, the optimized photodetector exhibits performance-enhanced ultraviolet detection capabilities, such as the light on/off ratio reaching up to 1.6 × 108, responsivity of over 267 mA W-1 and specific detectivity of approximately 1.2 × 1014 Jones upon 365 nm light illumination at 0 V. The detector also produces faster response with rise/recovery times of 102 µs/3.6 ms. This study not only employed a novel method to synthesize genuine p-type ZnO with excellent stability and reproducibility, but also opened up substantial opportunities for developing high-performance ZnO homojunction optoelectronic devices.

Tuning the size of skyrmion by strain at the Co/Pt3 interfaces.

Based on density functional theory calculations, we elucidated the tunability of the atomic structures and magnetic interactions of Co/Pt3 interface (one layer of hcp(0001) Co and three layers of fcc(111) Pt) and thus the skyrmion sizes using strain. The dispersion relations of the spin spiral in the opposite directions, E(q) and E(-q), were evaluated based on generalized Bloch equations. Effective exchange coupling (EC) and Dzyaloshinsky-Moriya interaction (DMI) parameters between different neighbors J i and d i at different lattice constants were derived by fitting the resulting spin spiral dispersion E(q) to EC model with DMI and E(q)-E(-q) formula, respectively. We observed an increase in DMI and a significant decrease in EC with an increase in strain. Hence, the size of Néel-type skyrmions determined by the ratio of EC/DMI can be controlled by applying strain, leading to an effective approach to tailor the formation of skyrmion lattices by inducing slight structural modifications on the magnetic thin films.

Improved optical properties of perovskite solar cells by introducing Ag nanopartices and ITO AR layers.

Embedded noble metal nanostructures and surface anti-reflection (AR) layers affect the optical properties of methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells significantly. Herein, by employing a combined finite element method and genetic algorithm approach, we report five different types of CH3NH3PbI3 perovskite solar cells by introducing embedded Ag nanoparticles within the CH3NH3PbI3 layer and/or top ITO cylinder grating as an AR layer. The maximum photocurrent was optimized to reach 23.56 mA/cm2, which was 1.09/1.17 times higher than Tran's report/ flat cases. It is also comparable with values (23.6 mA/cm2) reported in the literature. The calculations of the electric field and charge carrier generation rate of the optimized solar cell further confirms this improvement than flat cases. It attributes to the synergistic effect of the embedded Ag nanoparticles and ITO AR layer. The results obtained herein hold great promise for future boosting the optical efficiency of perovskite solar cells.

Gold microplates with well-defined shapes.

The synthesis and growth mechanism of well-defined nanostructures are still challenging. In this study, gold microplates with starlike, shieldlike, and other polygonal shapes are successfully achieved in high yields on the basis of the polyol process. Structural studies demonstrate that these newly shaped Au plates are single-crystalline, several micrometers in lateral size, and tens of nanometers in thickness. It is believed that the introduction of temperature variation in the early stage of crystal growth is important for these products. The newly discovered Au microplates result from the growth of the {111} plane along the 211 and other high-index directions, in addition to the {111}-close-packed 110 directions. Simulations on the multiple-twin-induced crystal growth and surface energy are also carried out to explain the experimental observations. This work is valuable for anisotropic growth of newly shaped noble-metal nanostructures.

Coupled effects of size and uniaxial force on phase transitions in copper nanowires.

By means of molecular dynamics simulations, we investigate solid-solid phase transitions between the regular crystalline structure and the unbuckled atomic-sized one in ultrathin copper nanowires under uniaxial elongation and compression. The interatomic potential employed has been verified to be capable of describing the structural and mechanical properties of ultrathin copper nanowires. The coupled effects of size, uniaxial force and relaxing temperature on the transitions have been revealed. Both the reported phase transition from the crystalline structure to the helical one and the unexpected inverse behavior are found. At a relaxing temperature of 900 K, helical structures are dominant for effective diameters less than 0.8 nm, while the uniaxial force may lead to helical-crystalline phase transitions for thicker ones. We also observe that the transition from a helical 12-7-1 nanowire to a crystalline [110] nanowire is much easier than the inverse transition. Our results demonstrate the structural phase transitions between the crystalline structures and the unbuckled atomic-sized ones of the force-suspended metal nanowires.

Hybrid quadrupole plasmon induced spectrally pure ultraviolet emission from a single AgNPs@ZnO:Ga microwire based heterojunction diode.

Ultraviolet light-emitting materials and devices with high-efficiency are required for many applications. One promising way to enhance the ultraviolet luminescence efficiency is by incorporating plasmonic nanostructures. However, a large energy mismatch between the plasmons and the light emitters greatly limits the direct realization of light enhancement. In this work, a single Ga-doped ZnO microwire prepared with large-sized Ag nanoparticle (the diameter d ∼ 200 nm) deposition (AgNPs@ZnO:Ga MW) was utilized to construct a high-performance heterojunction diode, with p-GaN serving as the hole injection layer. In addition to enhanced optical output, the emission spectra also revealed that typical near-band-edge (NBE) emission with higher wavelength stability centered around 378.0 nm was achieved, accompanied by narrowing of the spectral linewidth to around 10 nm. Thus, the interfacial and p-GaN emissions were successfully suppressed. The spectral profile of the emission spectra of the heterojunction diodes precisely matched the photoluminescence spectrum of the single ZnO:Ga MW, which indicates that the single ZnO:Ga MW can act as the active region for the radiative recombination of electrons and holes in the diode operation. In the emission mechanism, hybrid quadrupole plasmons induce the generation of hot electrons, which are then injected into the conduction band of the neighboring ZnO:Ga and are responsible for the NBE-type emission of the single MW based heterojunction diode. This novel emission enhancement and modulation principle can aid in the design and development of new types of luminescent materials and devices with high-efficiency, spectral stability and spectral purity.

A Novel Amphibian Antimicrobial Peptide, Phylloseptin-PV1, Exhibits Effective Anti-staphylococcal Activity Without Inducing Either Hepatic or Renal Toxicity in Mice.

In order to part address the problem of drug-resistant pathogens, antimicrobial peptides (AMPs) have been proposed as alternatives to traditional antibiotics. Herein, a novel phylloseptin peptide, named phylloseptin-PV1 (PPV1), is described from the defensive skin secretion of the Neotropical white-lined leaf frog, Phyllomedusa vaillantii. The peptide was synthesized by solid phase peptide synthesis (SPPS) and purified by RP-HPLC, prior to assessment of its biological activities. PPV1 not only demonstrated potent antimicrobial activity against planktonic ESKAPE microorganisms and the yeast, Candida albicans, but also inhibited and eradicated Staphylococcus aureus and MRSA biofilms. The antimicrobial mechanism was shown to include permeabilization of target cell membranes. The in vivo antimicrobial activity of the peptide was then evaluated using mice. PPV1 also exhibited antiproliferative activity against the cancer cell lines, H157, MCF-7, and U251MG, but had a lower potency against the normal cell line, HMEC-1. Although, the peptide possessed a moderate hemolytic action on mammalian red blood cells in vitro, it did not induce significant hepatic or renal toxicity in injected infected mice. These studies have thus found PPV1 to be a potent phylloseptin group AMP, which can effectively inhibit staphylococci, both in vitro and in vivo, without eliciting toxicity. These data thus provide support for further evaluation of PPV1 as a novel antimicrobial agent with therapeutic potential.

Wavelength-Tunable Waveguide Emissions from Electrically Driven Single ZnO/ZnO:Ga Superlattice Microwires.

Because of the superlattice structures comprising periodic and alternating crystalline layers, one-dimensional photon crystals can be employed to expand immense versatility and practicality of modulating the electronic and photonic propagation behaviors, as well as optical properties. In this work, individual superlattice microwires (MWs) comprising ZnO and Ga-doped ZnO (ZnO/ZnO:Ga) layers were successfully synthesized. Wavelength-tunable multipeak emissions can be realized from electrically driven single superlattice MW-based emission devices, with the dominant wavelengths tuned from ultraviolet to visible spectral regions. To illustrate the multipeak character, single superlattice MWs were selected to construct fluorescent emitters, and the emission wavelength could be tuned from 518 to 562 nm, which is dominated by Ga incorporation. Especially, by introducing Au quasiparticle film decoration, emission characteristics can further be modulated, such as the red shift of the emission wavelengths, and the multipeaks were strongly modified and split into more and narrower subbands. In particular, electrically pumped exciton-polariton emission was realized from heterojunction diodes composed of single ZnO/ZnO:Ga superlattice MWs and p-GaN layers in the blue-ultraviolet spectral regions. With the aid of localized surface plasmons from Au nanoparticles, which deposited on the superlattice MW, significant improvement of emission characteristics, such as enhancement of output efficiencies, blue shift of the dominant emission wavelengths, and narrowing of the spectral linewidth, can be achieved. The multipeak emission characteristics would be originated from the typical optical cavity modes, but not the Fabry-Perot mode optical cavity formed by the bilateral sides of the wire. The resonant modes are likely attributed to the coupled optical microcavities, which formed along the axial direction of the wire; thus, the emitted photons can be propagated and selected longitudinally. Therefore, the novel ZnO/ZnO:Ga superlattice MWs with a quadrilateral cross section can provide a potential platform to construct multicolor emitters and low-threshold exciton-polariton diodes and lasers.

A Novel Bradykinin-Related Peptide, RVA-Thr6-BK, from the Skin Secretion of the Hejiang Frog; Ordorrana hejiangensis: Effects of Mammalian Isolated Smooth Muscle.

A novel naturally-occurring bradykinin-related peptide (BRP) with an N-terminal extension, named RVA-Thr6-Bradykinin (RVA-Thr6-BK), was here isolated and identified from the cutaneous secretion of Odorrana hejiangensis (O. hejiangensis). Thereafter, in order to evaluate the difference in myotropic actions, a leucine site-substitution variant from Amolops wuyiensis skin secretion, RVA-Leu1, Thr6-BK, was chemically synthesized. Myotropic studies indicated that single-site arginine (R) replacement by leucine (L) at position-4 from the N-terminus, altered the action of RVA-Thr6-BK from an agonist to an antagonist of BK actions on rat ileum smooth muscle. Additionally, both BK N-terminal extended derivatives (RVA-Thr6-BK and RVA-Leu1, Thr6-BK) exerted identical myotropic actions to BK, such as increasing the frequency of contraction, contracting and relaxing the rat uterus, bladder and artery preparations, respectively.