Drought affects the performance of native oak seedlings more strongly than competition with invasive crested wattle seedlings.

Two of the most important processes threatening vulnerable plant species are competitive displacement by invasive alien species and water stress due to global warming. Quercus lusitanica, an oak shrub species with remarkable conservation interest, could be threatened by the expansion of the invasive alien tree Paraserianthes lophantha. However, it is unclear how competition would interact with predicted reductions in water availability due to global climate change. We set up a full factorial experiment to examine the direct interspecific competition between P. lophantha and Q. lusitanica seedlings under control and water-limited conditions. We measured seed biomass, germination, seedling emergence, leaf relative growth rate, biomass, root/shoot ratio, predawn shoot water potential and mortality to assess the individual and combined effects of water stress and interspecific competition on both species. Our results indicate that, at seedling stage, both species experience competitive effects and responses. However, water stress exhibited a stronger overall effect than competition. Although both species responded strongly to water stress, the invasive P. lophantha exhibited significantly less drought stress than the native Q. lusitanica based on predawn shoot water potential measurements. The findings of this study suggest that the competition with invasive P. lophantha in the short term must not be dismissed, but that the long-term conservation of the native shrub Q. lusitanica could be compromised by increased drought as a result of global change. Our work sheds light on the combined effects of biological invasions and climate change that can negatively affect vulnerable plant species.

Adhesion between biodegradable polymers and hydroxyapatite: Relevance to synthetic bone-like materials and tissue engineering scaffolds.

Many studies are currently underway on the quest to make synthetic bone-like materials with composites of polymeric materials and hydroxyapatite (HA). In the present work, we use wetting experiments and surface tension measurements to determine the work of adhesion between biodegradable polymers and HA, with specific reference to the role of humid environments. All the polymers are found to exhibit low contact angles (

Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting.

A key issue for the fabrication of scaffolds for tissue engineering is the development of processing techniques flexible enough to produce materials with a wide spectrum of solubility (bioresorption rates) and mechanical properties matching those of calcified tissues. These techniques must also have the capability of generating adequate porosity to further serve as a framework for cell penetration, new bone formation, and subsequent remodeling. In this study we show how hybrid organic/inorganic scaffolds with controlled microstructures can be built using robotic assisted deposition at room temperature. Polylactide or polycaprolactone scaffolds with pore sizes ranging between 200-500 microm and hydroxyapatite contents up to 70 wt % were fabricated. Compressive tests revealed an anisotropic behavior of the scaffolds, strongly dependant on their chemical composition. The inclusion of an inorganic component increased their stiffness but they were not brittle and could be easily machined even for ceramic contents up to 70 wt %. The mechanical properties of hybrid scaffolds did not degrade significantly after 20 days in simulated body fluid. However, the stiffness of pure polylactide scaffolds increased drastically due to polymer densification. Scaffolds containing bioactive glasses were also printed. After 20 days in simulated body fluid they developed an apatite layer on their surface.

Nonreactive spreading at high temperature: molten metals and oxides on molybdenum.

The spontaneous spreading of small liquid metal (Cu, Ag, Au) and oxide drops on Mo substrates has been studied using a drop transfer setup combined with high-speed video. Under the experimental conditions used in this work, spreading occurs in the absence of interfacial reactions or ridging. The analysis of the spreading data indicates that dissipation at the triple junction (that can be described in terms of a triple-line friction) is playing a dominant role in the movement of the liquid front. This is due, in part, to the much stronger atomic interactions in high-temperature systems when compared to organic liquids. As a result of this analysis, a comprehensive view of spreading emerges in which the strength of the atomic interactions (solid-liquid, liquid-liquid) determines the relative roles of viscous impedance and dissipation at the triple junction in spreading kinetics.

Wide angle crystal spectrometer for angularly and spectrally resolved X-ray scattering experiments.

A novel wide angle spectrometer has been implemented with a highly oriented pyrolytic graphite crystal coupled to an image plate. This spectrometer has allowed us to look at the energy resolved spectrum of scattered x rays from a dense plasma over a wide range of angles (approximately 30 degrees ) in a single shot. Using this spectrometer we were able to observe the temporal evolution of the angular scatter cross section from a laser shocked foil. A spectrometer of this type may also be useful in investigations of x-ray line transfer from laser-plasmas experiments.

Born small, die young: Intrinsic, size-selective mortality in marine larval fish.

Mortality during the early stages is a major cause of the natural variations in the size and recruitment strength of marine fish populations. In this study, the relation between the size-at-hatch and early survival was assessed using laboratory experiments and on field-caught larvae of the European sardine (Sardina pilchardus). Larval size-at-hatch was not related to the egg size but was significantly, positively related to the diameter of the otolith-at-hatch. Otolith diameter-at-hatch was also significantly correlated with survival-at-age in fed and unfed larvae in the laboratory. For sardine larvae collected in the Bay of Biscay during the spring of 2008, otolith radius-at-hatch was also significantly related to viability. Larval mortality has frequently been related to adverse environmental conditions and intrinsic factors affecting feeding ability and vulnerability to predators. Our study offers evidence indicating that a significant portion of fish mortality occurs during the endogenous (yolk) and mixed (yolk /prey) feeding period in the absence of predators, revealing that marine fish with high fecundity, such as small pelagics, can spawn a relatively large amount of eggs resulting in small larvae with no chances to survive. Our findings help to better understand the mass mortalities occurring at early stages of marine fish.

Bioactive glass coatings with hydroxyapatite and Bioglass particles on Ti-based implants. 1. Processing.

Silicate-based glasses with thermal expansion coefficients that match those of Ti6A14V were prepared and used to coat Ti6A14V by a simple enameling technique. Bioglass (BG) or hydroxyapatite (HA) particles were embedded on the coatings in order to enhance their bioactivity. HA particles were immersed partially during heating and remained firmly embedded on the coating after cooling. There was no apparent reaction at the glass/HA interface at the temperatures used in this work (800-840 degrees C). In contrast, BG particles softened and some infiltration into the glass coating took place during heat treatment. In this case, particles with sizes over 45 microm were required, otherwise the particles became hollow due to the infiltration and crystallization of the glass surface. The concentration of the particles on the coating was limited to 20% of surface coverage. Concentrations above this value resulted in cracked coatings due to excessive induced stress. Cracks did not propagate along the interfaces when coatings were subjected to Vickers indentation tests, indicating that the particle/glass and glass/metal interfaces exhibited strong bonds. Enameling, producing excellent glass/metal adhesion with well-attached bioactive particles on the surface, is a promising method of forming reliable and lasting implants which can endure substantial chemical and mechanical stresses.

In vitro behavior of silicate glass coatings on Ti6A14V.

The in vitro response in simulated body fluid (SBF) of silicate glass coatings on Ti6A14V was evaluated. Glasses belonging to the SiO2-CaO-MgO-Na2O-K2O-P2O5 system were used to prepare 50-70 m thick coatings on Ti6Al4V, employing a simple enameling technique. Glasses with silica content higher than 55 wt% can be used to prepare coatings that do not crack or delaminate and exhibit good adhesion to the alloy. It has been found that coatings with silica content lower than 60 wt% are more susceptible to corrosion and precipitate carbonated hydroxyapatite on their surface during in vitro tests. However, these coatings have a higher thermal expansion than the metal and are under tension. After 2 months in SBF cracks grow in the coating that reach the glass/metal interface and initiate delamination. Glasses with silica content higher than 60 wt% are more resistant to corrosion and have lower thermal expansion. These coatings do not crack but they do not precipitate apatite even after 2 months in SBF.

Lactococcus garvieae endocarditis: report of a case and review of the literature.

Bacterial endocarditis due to Lactococcus garvieae is extremely unusual, and may actually be underreported due to its morphologic and biochemical similarities with enterococci. Only three cases have been reported in the medical literature, and all involved prosthetic valves. We report a case of native valve bacterial endocarditis caused by L. garvieae.

Metastatic germ cell tumor to the heart presenting with syncope.

Malignant nonseminomatous germ cell tumors (NSGCT) rarely metastasize to the heart. The first such case presenting with syncope is described. Eight previously described cases of NSGCT with intracaval metastasis to the heart are reviewed and the literature to date is discussed. Transesophageal echocardiography is the diagnostic study of choice and treatment consists primarily of platinum-based chemotherapy followed by surgical resection of residual deposits.

[Percutaneous drainage of pyogenic hepatic abscesses]. / Drenaje percutáneo de abscesos hepáticos piogenos.

Thirty-five patients with pyogenic hepatic abscesses who underwent percutaneous drainage techniques are analyzed in a study period that comprises six years (from 1986 to 1992). Of the 35 cases, 7 (20%) presented abscesses smaller than 5 cm and were drained by puncture aspiration only. All of them were cured. One or more pig-tail 8 F catheters were placed in the remaining 28 patients (80%). The cure rate was 78.5%. The average drainage period comprised 15 days. Fourteen patients (40%) presented lesser complications during either the procedure in itself or the convalescence period, bacteriemia being the most frequent one. The mortality rate was 17%.

[Thermal resistance of Candida tropicalis and Rhodotorula rubra in orange juice]. / Resistenica térmica de Candida tro picalis y Rhodotorula rubra en jugo de naranja.

The thermal resistance of two yeasts (Candida tropicalis and Rhodotorula rubra) was studied. The yeasts were isolated from Venezuelan pasteurized orange juice obtained at retail level. The flask method was utilized, applying temperatures which ranged from 49.5 to 53.5 degrees C to initial populations of 1x10(5) cells/ml of orange juice. Values of D50C=3.4 min and z=4.1 degrees C were found for C. tropicalis, and D50C=2.6 min and z=9.8 degrees C for R. rubra. Linear correlation coefficients of r=0.99 and r=0.98 wee obtained, respectively, for the experimental data.

[Optimization of the freezing process by load]. / Optimización de procesos de congelación pro cargas.

A model was developed for the optimization of batch freezing to maximize the daily production of a plate freezer. An equation for the prediction of the optimal product thickness was found. The model was evaluated experimentally in a one-plate freezer with a food model consisting of a 9% bentonite mixture. The model demonstrated it predicted adequately the freezing times and optimal product thickness. Under the experimental conditions used by the authors, an optimal thickness of 0.0142 m was found, with five batches per day. The maximum daily production was 3.152 kg.

[Effect of the position of the container in the retention of nutrients in food models heated by natural convection]. / Efecto de la posicíon del envase en la retención de nutrientes en modelos alimentarios calentados por convección natural.

The existence of statistically significant differences in the nutrient retention of products heated by natural convection in cylindrical containers of equal size when thermally processed in vertical and horizontal position was studied. The thiamine retention was found to be significantly greater for containers placed in vertical position. A modification to the model proposed by Barreiro (4) for the prediction of nutrient retention during thermal processing of vertically placed canned model systems heated by natural convection was also developed to adapt it to containers processed in a horizontal position. To achieve this goal, an equivalent characteristic length was found for the vertically placed containers, and several changes were introduced. The modified model was then evaluated through ten experiments with different thermal processing parameters. The theoretical thiamine retention values predicted by the model wee compared with the experimental retention. In all cases they were within the 99% confidence interval of the experimental values. This demonstrated that the modified model can accurately predict nutrient retention during thermal processing of products packed in cylindrical containers, and placed in horizontal position.

Identification of miRNAs as potential modulators of tissue factor expression in patients with systemic lupus erythematosus and antiphospholipid syndrome.

BACKGROUND: Tissue factor (TF) is the main initiator of the coagulation cascade and elements that may upregulate its expression might provoke thrombotic events. Systemic lupus erythematosus (SLE) and antiphospholipid syndrome (APS) are autoimmune diseases characterized by a high TF expression in monocytes. OBJECTIVES: To examine the role of microRNAs (miRNAs) in TF expression and to evaluate their levels in SLE and APS patients. METHODS: An in silico search was performed to find potential putative binding sites of miRNAs in TF mRNA. In vitro validation was performed transfecting cells expressing TF (THP-1 and MDA-MB-231) with oligonucleotide miRNA precursors and inhibitors. Additionally, reporter assays were performed to test for the binding of miR-20a to TF mRNA. Levels of miRNAs and TF were measured by quantitative (qRT-PCR) in patients with APS and SLE. RESULTS: Overexpression of miRNA precursors, but not inhibitors, of two of the members of cluster miR-17∼92, for example miR-19b and miR-20a, in cells expressing TF decreased TF mRNA, protein levels, and procoagulant activity between 30% and 60%. Reporter assays showed that miR-20a binds to TF mRNA. Finally, we measured levels of miR-19b and miR-20a in monocytes from patients with APS and SLE and observed significantly lower miRNAs levels in comparison with healthy subjects inversely correlated with the levels of TF. CONCLUSIONS: Down-regulation of miR-19b and miR-20a observed in patients with SLE and APS could contribute to increased TF expression and thus provoke the hypercoagulable state characteristic of these patients.

Maxillary sinus floor augmentation on humans: Packing simulations and 8 months histomorphometric comparative study of anorganic bone matrix and ß-tricalcium phosphate particles as grafting materials.

The present study compares the behaviour of an anorganic bone matrix material and a synthetic ß-Tricalcium phosphate employed as grafting materials in a sinus floor augmentation two step protocol in humans. In order to estimate the initial occupation level for the two materials, an 'in vitro' simulation has been performed to analyse macroporosity created due to particle packing in terms of porosity and interparticle distances. Grafting in the sinus floor augmentation was performed by filling the defects only with pure grafting materials without autogenous bone addition. The new-bone generated is 100% based on the osteoconductive properties of the grafted materials in contact with physiological fluids. The implants were placed 8 months after the grafting procedure. All the implanted positions were biopsied and embedded in methacrylate resin. Histomorphometric analyses were done over thin film undecalcified sections. Packing simulations allow establishing a comparison of the resorbed volumes related to the initial occupancy of the grafting materials inside the defect. The nature of this interconnected pore network is very alike for either material so new-bone generated was similar (~35 vol.%).