Controlled lid-opening in Thermomyces lanuginosus lipase- An engineered switch for studying lipase function.

Here, we present a lipase mutant containing a biochemical switch allowing a controlled opening and closing of the lid independent of the environment. The closed form of the TlL mutant shows low binding to hydrophobic surfaces compared to the binding observed after activating the controlled switch inducing lid-opening. We directly show that lipid binding of this mutant is connected to an open lid conformation demonstrating the impact of the exposed amino acid residues and their participation in binding at the water-lipid interface. The switch was created by introducing two cysteine residues into the protein backbone at sites 86 and 255. The crystal structure of the mutant shows the successful formation of a disulfide bond between C86 and C255 which causes strained closure of the lid-domain. Control of enzymatic activity and binding was demonstrated on substrate emulsions and natural lipid layers. The locked form displayed low enzymatic activity (~10%) compared to wild-type. Upon release of the lock, enzymatic activity was fully restored. Only 10% binding to natural lipid substrates was observed for the locked lipase compared to wild-type, but binding was restored upon adding reducing agent. QCM-D measurements revealed a seven-fold increase in binding rate for the unlocked lipase. The TlL_locked mutant shows structural changes across the protein important for understanding the mechanism of lid-opening and closing. Our experimental results reveal sites of interest for future mutagenesis studies aimed at altering the activation mechanism of TlL and create perspectives for generating tunable lipases that activate under controlled conditions.

Lipases That Activate at High Solvent Polarities.

Thermomyces lanuginosus lipase (TlL) and related lipases become activated in low-polarity environments that exist at the water-lipid interface where a structural change of the "lid" region occurs. In this work, we have investigated the activation of TlL (Lipase_W89) and certain lid mutants, containing either a single positive charge mutation, E87K (Lipase_K87_W89), within the lid region or a lid residue composition of both lipase and esterase character (Hybrid_W89) as a function of solvent polarity. Activation differences between the variants and TlL were studied by a combination of biophysical and theoretical methods. To investigate the structural changes taking place in the lid region upon lipase activation, we used a fluorescence-based method measuring the efficiency of Trp89 in the lid to quench the fluorescence of a bimane molecule attached in front (C255) and behind (C61) the lid. These structural changes were compared to the enzymatic activity of each variant at the water-substrate interface and to theoretical calculations of the energies associated with lid opening as a function of the dielectric constant (ε) of the environment. Our results show that the lid in Lipase_K87_W89 undergoes a pronounced structural transition toward an open conformation around ε = 50, whereas only small changes are detected for Lipase_W89 ascribed to the stabilizing effect of the positive charge mutation on the open lid conformation. Interestingly, Hybrid_W89, with the same charge as Lipase_W89, shows a stabilization of the open lid even more pronounced at high solvent polarities than that of Lipase_K87_W89, allowing activation at ε < 80. This is further indicated by measurement of the lipase activity for each variant showing that Hybrid_W89 is more quickly activated at the water-lipid interface of a true, natural substrate. Combined, we show that a correlation exists between structural changes and enzymatic activities detected on one hand and theoretical calculations on lid opening energies on the other. These results highlight the key role that the lid plays in determining the polarity-dependent activation of lipases.

Promoting protein self-association in non-glycosylated Thermomyces lanuginosus lipase based on crystal lattice contacts.

We have used the crystal structure of Thermomyces lanuginosus lipase (TlL) to identify and strengthen potential protein-protein interaction sites in solution. As wildtype we used a deglycosylated mutant of TlL (N33Q). We designed a number of TlL mutants to promote interactions via interfaces detected in the crystal-lattice structure, through strengthening of hydrophobic, polar or electrostatic contacts or truncation of sterically blocking residues. We identify a mutant predicted to lead to increased interfacial hydrophobic contacts (N92F) that shows markedly increased self-association properties on native gradient gels. While wildtype TlL mainly forms monomer and <5% dimers, N92F forms stable trimers and dimers according to Size-Exclusion Chromatography and Small-Angle X-ray Scattering. These oligomers account for ~25% of the population and their enzymatic activity is comparable to that of the monomer. Self-association stabilizes TlL against thermal denaturation. Furthermore, the trimer is stable to dilution and requires high concentrations (>2M) of urea to dissociate. We conclude that crystal lattice contacts are a good starting point for design strategies to promote protein self-association.

The Enzymatic Activity of Lipases Correlates with Polarity-Induced Conformational Changes: A Trp-Induced Quenching Fluorescence Study.

Triacylglycerol hydrolases (EC 3.1.1.3) are thought to become activated when they encounter the water-lipid interface causing a "lid" region to move and expose the catalytic site. Here, we tested this idea by looking for lid movements in Thermomyces lanuginosus lipase (TL lipase), and in variants with a mutated lid region of esterase (Esterase) and esterase/lipase (Hybrid) character. To measure lid movements, we employed the tryptophan-induced quenching (TrIQ) fluorescence method to measure how effectively a Trp residue on the lid of these mutants (at position 87 or 89) could quench a fluorescent probe (bimane) placed at nearby site 255 on the protein. To test if lid movement is induced when the enzyme detects a lower-polarity environment (such as at the water-lipid interface), we performed these studies in solvents with different dielectric constants (ε). The results show that lid movement is highly dependent on the particular lid residue composition and solvent polarity. The data suggest that in aqueous solution (ε = 80), the Esterase lid is in an "open" conformation, whereas for the TL lipase and Hybrid, the lid remains "closed". At lower solvent polarities (ε < 46), the lid region for all of the mutants is more "open". Interestingly, these behaviors mirror the structural changes thought to take place upon activation of the enzyme at the water-lipid interface. Together, these results support the idea that lipases are more active in low-polarity solvents because the lid adopts an "open" conformation and indicate that relatively small conformational changes in the lid region play a key role in the activation mechanism of these enzymes.

Altering the activation mechanism in Thermomyces lanuginosus lipase.

It is shown by rational site-directed mutagenesis of the lid region in Thermomyces lanuginosus lipase that it is possible to generate lipase variants with attractive features, e.g., high lipase activity, fast activation at the lipid interface, ability to act on water-soluble substrates, and enhanced calcium independence. The rational design was based on the lid residue composition in Aspergillus niger ferulic acid esterase (FAEA). Five constructs included lipase variants containing the full FAEA lid, a FAEA-like lid, an intermediate lid of FAEA and TlL character, and the entire lid region from Aspergillus terreus lipase (AtL). To investigate an altered activation mechanism for each variant compared to that of TlL, a combination of activity- and spectroscopic-based measurements were applied. The engineered variant with a lid from AtL displayed interfacial activation comparable to that of TlL, whereas variants with FAEA lid character showed interfacial activation independence with pronounced activity toward pNP-acetate and pNP-butyrate below the critical micelle concentration. For variants with lipase and esterase character, lipase activity measurements further indicated a faster activation at the lipid interface. Relative to their activity toward pNP-ester substrates in calcium-rich buffer, all lid variants retained between 15 and 100% activity in buffer containing 5 mM EDTA whereas TlL activity was reduced to less than 2%, demonstrating the lid's central role in governing calcium dependency. For FAEA-like lid variants, accessible hydrophobic surface area measurements showed an approximate 10-fold increase in the level of binding of extrinsic fluorophores to the protein surface relative to that of TlL accompanied by a blue shift in emission indicative of an open lid in aqueous solution. Together, these studies report on the successful alteration of the activation mechanism in TlL by rational design creating novel lipases with new, intriguing functionalities.

Multicopper oxidases with laccase-ferroxidase activity: Classification and study of ferroxidase activity determinants in a member from Heterobasidion annosum s. l.

Multi-copper oxidases (MCO) share a common molecular architecture and the use of copper ions as cofactors to reduce O2 to H2O, but show high sequence heterogeneity and functional diversity. Many new emerging MCO genes are wrongly annotated as laccases, the largest group of MCOs, with the widest range of biotechnological applications (particularly those from basidiomycete fungi) due to their ability to oxidise aromatic compounds and lignin. Thus, comprehensive studies for a better classification and structure-function characterisation of MCO families are required. Laccase-ferroxidases (LAC-FOXs) constitute a separate and unexplored group of MCOs with proposed dual features between laccases and ferroxidases. We aim to better define this cluster and the structural determinants underlying putative hybrid activity. We performed a phylogenetic analysis of the LAC-FOXs from basidiomycete fungi, that resulted in two subgroups. This division seemed to correlate with the presence or absence of some of the three acidic residues responsible for ferroxidase activity in Fet3p from Saccharomyces cerevisiae. One of these LAC-FOXs (with only one of these residues) from the fungus Heterobasidion annosum s. l. (HaLF) was synthesised, heterologously expressed and characterised to evaluate its catalytic activity. HaLF oxidised typical laccase substrates (phenols, aryl amines and N-heterocycles), but no Fe (II). The enzyme was subjected to site-directed mutagenesis to determine the key residues that confer ferroxidase activity. The mutated HaLF variant with full restoration of the three acidic residues exhibited efficient ferroxidase activity, while it partially retained the wide-range oxidative activity of the native enzyme associated to laccases sensu stricto.

Role and structure of the small subunit forming heterodimers with laccase-like enzymes.

Unlike laccases sensu stricto, which are usually monomeric enzymes, laccase-like enzymes recently re-classified as Novel Laccases (NLACs) are characterized by the formation of heterodimers with small proteins (subunits) of unknown function. Here the NLAC from Pleurotus eryngii (PeNL) and a small protein selected from the fungal genome, that is homologous to reported POXA3 from Pleurotus ostreatus, were produced in Aspergillus oryzae separately or together. The two proteins interacted regardless of whether the small subunit was co-expressed or exogenously added to the enzyme. The stability and catalytic activity of PeNL was significantly enhanced in the presence of the small subunit. Size exclusion chromatography-multi angle light scattering (SEC-MALS) analysis confirmed that the complex PeNL-ss is a heterodimer of 77.4 kDa. The crystallographic structure of the small protein expressed in Escherichia coli was solved at 1.6 Å resolution. This is the first structure elucidated of a small subunit of a NLAC. The helix bundle structure of the small subunit accommodates well with the enzyme model structure, including interactions with specific regions of NLACs and some amino acid residues of the substrate-binding loops.

Candida antarctica lipase B performance in organic solvent at varying water activities studied by molecular dynamics simulations.

Applications of lipases in low-water environments are found across a broad range of industries, including the pharmaceutical and oleochemical sectors. This includes condensation reactions in organic solvents where the enzyme activity has been found to depend strongly on both the solvent and the water activity (aw). Despite several experimental and computational studies, knowledge is largely empirical, and a general predictive approach is much needed. To close this gap, we chose native Candida antarctica lipase B (CALB) and two mutants thereof and used molecular dynamics (MD) simulations to gain a molecular understanding of the effect of aw on the specific activity of CALB in hexane. Based on the simulations, we propose four criteria to understand the performance of CALB in organic media, which is supported by enzyme kinetics experiments. First, the lipase must be stable in the organic solvent, which was the case for native CALB and the two mutants studied here. Secondly, water clusters that form and grow close to the active site must not block the path of substrate molecules into the active site. Thirdly, the lipase's lid must not cover the active site. Finally, mutations and changes in aw must not disrupt the geometry of the active site. We show that mutating specific residues close to the active site can hinder water cluster formation and growth, making the lipase resistant to changes in aw. Our computational screening criteria could potentially be used to screen in-silico designed variants, so only promising candidates could be pushed forward to characterisation.

Structural and biochemical insights into an engineered high-redox potential laccase overproduced in Aspergillus.

Fungal laccases have great potential as biocatalysts oxidizing a variety of aromatic compounds using oxygen as co-substrate. Here, the crystal structure of 7D5 laccase (PDB 6H5Y), developed in Saccharomyces cerevisiae and overproduced in Aspergillus oryzae, is compared with that of the wild type produced by basidiomycete PM1 (Coriolopsis sp.), PDB 5ANH. SAXS showed both enzymes form monomers in solution, 7D5 laccase with a more oblate geometric structure due to heavier and more heterogeneous glycosylation. The enzyme presents superior catalytic constants towards all tested substrates, with no significant change in optimal pH or redox potential. It shows noticeable high catalytic efficiency with ABTS and dimethyl-4-phenylenediamine, 7 and 32 times better than the wild type, respectively. Computational simulations demonstrated a more favorable binding and electron transfer from the substrate to the T1 copper due to the introduced mutations. PM1 laccase is exceptionally stable to thermal inactivation (t1/2 70 °C = 1.2 h). Yet, both enzymes display outstanding structural robustness at high temperature. They keep folded during 2 h at 100 °C though, thereafter, 7D5 laccase unfolds faster. Rigidification of certain loops due to the mutations added on the protein surface would diminish the capability to absorb temperature fluctuations leading to earlier protein unfolding.

Unexpected regioselectivity of Humicola insolens Cel7B glycosynthase mutants.

Four Humicola insolens Cel7B glycoside hydrolase mutants have been evaluated for the coupling of lactosyl fluoride on O-allyl N(I)-acetyl-2(II)-azido-beta-chitobioside. Double mutants Cel7B E197A H209A and Cel7B E197A H209G preferentially catalyze the formation of a beta-(1-->4) linkage between the two disaccharides, while single mutant Cel7B E197A and triple mutant Cel7B E197A H209A A211T produce predominantly the beta-(1-->3)-linked tetrasaccharide. This result constitutes the first report of the modulation of the regioselectivity through site-directed mutagenesis for an endoglycosynthase.

Oxidoreductases on their way to industrial biotransformations.

Fungi produce heme-containing peroxidases and peroxygenases, flavin-containing oxidases and dehydrogenases, and different copper-containing oxidoreductases involved in the biodegradation of lignin and other recalcitrant compounds. Heme peroxidases comprise the classical ligninolytic peroxidases and the new dye-decolorizing peroxidases, while heme peroxygenases belong to a still largely unexplored superfamily of heme-thiolate proteins. Nevertheless, basidiomycete unspecific peroxygenases have the highest biotechnological interest due to their ability to catalyze a variety of regio- and stereo-selective monooxygenation reactions with H2O2 as the source of oxygen and final electron acceptor. Flavo-oxidases are involved in both lignin and cellulose decay generating H2O2 that activates peroxidases and generates hydroxyl radical. The group of copper oxidoreductases also includes other H2O2 generating enzymes - copper-radical oxidases - together with classical laccases that are the oxidoreductases with the largest number of reported applications to date. However, the recently described lytic polysaccharide monooxygenases have attracted the highest attention among copper oxidoreductases, since they are capable of oxidatively breaking down crystalline cellulose, the disintegration of which is still a major bottleneck in lignocellulose biorefineries, along with lignin degradation. Interestingly, some flavin-containing dehydrogenases also play a key role in cellulose breakdown by directly/indirectly "fueling" electrons for polysaccharide monooxygenase activation. Many of the above oxidoreductases have been engineered, combining rational and computational design with directed evolution, to attain the selectivity, catalytic efficiency and stability properties required for their industrial utilization. Indeed, using ad hoc software and current computational capabilities, it is now possible to predict substrate access to the active site in biophysical simulations, and electron transfer efficiency in biochemical simulations, reducing in orders of magnitude the time of experimental work in oxidoreductase screening and engineering. What has been set out above is illustrated by a series of remarkable oxyfunctionalization and oxidation reactions developed in the frame of an intersectorial and multidisciplinary European RTD project. The optimized reactions include enzymatic synthesis of 1-naphthol, 25-hydroxyvitamin D3, drug metabolites, furandicarboxylic acid, indigo and other dyes, and conductive polyaniline, terminal oxygenation of alkanes, biomass delignification and lignin oxidation, among others. These successful case stories demonstrate the unexploited potential of oxidoreductases in medium and large-scale biotransformations.

Synthesis and single enzyme activity of a clicked lipase-BSA hetero-dimer.

Click chemistry is used to construct a novel lipase-BSA hetero-dimer, in which the latter protein acts as a foot enabling the anchoring of the enzyme onto the surface for single enzyme studies.

Advanced Synthesis of Conductive Polyaniline Using Laccase as Biocatalyst.

Polyaniline is a conductive polymer with distinctive optical and electrical properties. Its enzymatic synthesis is an environmentally friendly alternative to the use of harsh oxidants and extremely acidic conditions. 7D5L, a high-redox potential laccase developed in our lab, is the biocatalyst of choice for the synthesis of green polyaniline (emeraldine salt) due to its superior ability to oxidize aniline and kinetic stability at the required polymerization conditions (pH 3 and presence of anionic surfactants) as compared with other fungal laccases. Doses as low as 7.6 nM of 7D5L catalyze the polymerization of 15 mM aniline (in 24 h, room temperature, 7% yield) in the presence of different anionic surfactants used as doping templates to provide linear and water-soluble polymers. Aniline polymerization was monitored by the increase of the polaron absorption band at 800 nm (typical for emeraldine salt). Best polymerization results were obtained with 5 mM sodium dodecylbenzenesulfonate (SDBS) as template. At fixed conditions (15 mM aniline and 5mM SDBS), polymerization rates obtained with 7D5L were 2.5-fold the rates obtained with commercial Trametes villosa laccase. Moreover, polyaniline yield was notably boosted to 75% by rising 7D5L amount to 0.15 µM, obtaining 1g of green polyaniline in 1L-reaction volume. The green polymer obtained with the selected system (7D5L/SDBS) holds excellent electrochemical and electro-conductive properties displayed in water-dispersible nanofibers, which is advantageous for the nanomaterial to be readily cast into uniform films for different applications.

Structural and mechanistic studies of chloride induced activation of human pancreatic alpha-amylase.

The mechanism of allosteric activation of alpha-amylase by chloride has been studied through structural and kinetic experiments focusing on the chloride-dependent N298S variant of human pancreatic alpha-amylase (HPA) and a chloride-independent TAKA-amylase. Kinetic analysis of the HPA variant clearly demonstrates the pronounced activating effect of chloride ion binding on reaction rates and its effect on the pH-dependence of catalysis. Structural alterations observed in the N298S variant upon chloride ion binding suggest that the chloride ion plays a variety of roles that serve to promote catalysis. One of these is having a strong influence on the positioning of the acid/base catalyst residue E233. Absence of chloride ion results in multiple conformations for this residue and unexpected enzymatic products. Chloride ion and N298 also appear to stabilize a helical region of polypeptide chain from which projects the flexible substrate binding loop unique to chloride-dependent alpha-amylases. This structural feature also serves to properly orient the catalytically essential residue D300. Comparative analyses show that the chloride-independent alpha-amylases compensate for the absence of bound chloride by substituting a hydrophobic core, altering the manner in which substrate interactions are made and shifting the placement of N298. These evolutionary differences presumably arise in response to alternative operating environments or the advantage gained in a particular product profile. Attempts to engineer chloride-dependence into the chloride-independent TAKA-amylase point out the complexity of this system, and the fact that a multitude of factors play a role in binding chloride ion in the chloride-dependent alpha-amylases.

Mechanism of protein kinetic stabilization by engineered disulfide crosslinks.

The impact of disulfide bonds on protein stability goes beyond simple equilibrium thermodynamics effects associated with the conformational entropy of the unfolded state. Indeed, disulfide crosslinks may play a role in the prevention of dysfunctional association and strongly affect the rates of irreversible enzyme inactivation, highly relevant in biotechnological applications. While these kinetic-stability effects remain poorly understood, by analogy with proposed mechanisms for processes of protein aggregation and fibrillogenesis, we propose that they may be determined by the properties of sparsely-populated, partially-unfolded intermediates. Here we report the successful design, on the basis of high temperature molecular-dynamics simulations, of six thermodynamically and kinetically stabilized variants of phytase from Citrobacter braakii (a biotechnologically important enzyme) with one, two or three engineered disulfides. Activity measurements and 3D crystal structure determination demonstrate that the engineered crosslinks do not cause dramatic alterations in the native structure. The inactivation kinetics for all the variants displays a strongly non-Arrhenius temperature dependence, with the time-scale for the irreversible denaturation process reaching a minimum at a given temperature within the range of the denaturation transition. We show this striking feature to be a signature of a key role played by a partially unfolded, intermediate state/ensemble. Energetic and mutational analyses confirm that the intermediate is highly unfolded (akin to a proposed critical intermediate in the misfolding of the prion protein), a result that explains the observed kinetic stabilization. Our results provide a rationale for the kinetic-stability consequences of disulfide-crosslink engineering and an experimental methodology to arrive at energetic/structural descriptions of the sparsely populated and elusive intermediates that play key roles in irreversible protein denaturation.

Degradation of phytate by the 6-phytase from Hafnia alvei: a combined structural and solution study.

Phytases hydrolyse phytate (myo-inositol hexakisphosphate), the principal form of phosphate stored in plant seeds to produce phosphate and lower phosphorylated myo-inositols. They are used extensively in the feed industry, and have been characterised biochemically and structurally with a number of structures in the PDB. They are divided into four distinct families: histidine acid phosphatases (HAP), ß-propeller phytases, cysteine phosphatases and purple acid phosphatases and also split into three enzyme classes, the 3-, 5- and 6-phytases, depending on the position of the first phosphate in the inositol ring to be removed. We report identification, cloning, purification and 3D structures of 6-phytases from two bacteria, Hafnia alvei and Yersinia kristensenii, together with their pH optima, thermal stability, and degradation profiles for phytate. An important result is the structure of the H. alvei enzyme in complex with the substrate analogue myo-inositol hexakissulphate. In contrast to the only previous structure of a ligand-bound 6-phytase, where the 3-phosphate was unexpectedly in the catalytic site, in the H. alvei complex the expected scissile 6-phosphate (sulphate in the inhibitor) is placed in the catalytic site.

Mode of action and properties of the beta-xylosidases from Talaromyces emersonii and Trichoderma reesei.

Enzymatic hydrolysis of arabinoxylan is an important prerequisite for the utilization of hemicellulose for ethanol fermentation or for making the low calorie sweetener xylitol by catalytic hydrogenation of the generated xylose. This study focus on cloning and characterization of two industrial relevant beta-xylosidases (1,4-beta-D-xylan xylohydrolase, EC 3.2.1.37) from Talaromyces emersonii (betaXTE) and Trichoderma reesei (betaXTR) and a comparison of these in relation to hemicellulose hydrolysis using an industrial relevant substrate. Both beta-xylosidases were expressed in A. oryzae and subsequently purified. During the enzymatic hydrolysis of xylobiose, the reaction product of both enzymes was found to be beta-D-xylose proving that the hydrolysis is proceeding via a retaining reaction mechanism. Based on sequence similarities and glycosyl hydrolases family membership, the active site residues of betaXTE and betaXTR are predicted to be Asp 242 and Glu 441, and Asp 264 and Glu 464, respectively. The involvement in catalysis of these carboxyls was examined by modification using the carbodiimide-nucleophile procedure resulting in a complete inactivation of both enzymes. The degree of xylose release from vinasse, an ethanol fermentation by-product, by betaXTE and betaXTR was 12.1% and 7.7%, respectively. Using the beta-xylosidases in combination with the multicomponent enzyme product Ultraflo L, resulted in 41.9% and 40.8% release of xylose, respectively indicating a strong synergistic effect between the exo-acting beta-xylosidases and the endo-1,4-beta-xylanases and alpha-L-arabinofuranosidase in Ultraflo L. There seems to be no measurable differences between the two beta-xylosidases when used in this specific application despite the differences in specific activity and kinetic properties.

Bionanoconjugation via click chemistry: The creation of functional hybrids of lipases and gold nanoparticles.

A simple and versatile method for the preparation of functional enzyme-gold nanoparticle conjugates using "click" chemistry has been developed. In a copper-catalyzed 1,2,3-triazole cycloaddition, an acetylene-functionalized Thermomyces lanuginosus lipase has been attached to azide-functionalized water-soluble gold nanoparticles under retention of enzymatic activity. The products have been characterized by gel electrophoresis and a fluorometric lipase activity assay. It is estimated that the equivalent of approximately seven fully active lipase molecules are attached to each nanoparticle.

Implications of surface charge and curvature for the binding orientation of Thermomyces lanuginosus lipase on negatively charged or zwitterionic phospholipid vesicles as studied by ESR spectroscopy.

The triglyceride lipase (EC 3.1.1.3) Thermomyces lanuginosus lipase (TLL) binds with high affinity to unilamellar phospholipid vesicles that serve as a diluent interface for both lipase and substrate, but it displays interfacial activation on only small and negatively charged such vesicles [Cajal, Y., et al. (2000) Biochemistry 39, 413-423]. The productive-mode binding orientation of TLL at the lipid-water interface of small unilamellar vesicles (SUV) consisting of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) was previously determined using electron spin resonance (ESR) spectroscopy in combination with site-directed spin-labeling [Hedin, E. M. K., et al. (2002) Biochemistry 41, 14185-14196]. In our investigation, we have studied the interfacial orientation of TLL when bound to large unilamellar vesicles (LUV) consisting of POPG, and bound to SUV consisting of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC). Eleven single-cysteine TLL mutants were spin-labeled as previously described, and studied upon membrane binding using the water soluble spin-relaxation agent chromium(III) oxalate (Crox). Furthermore, dansyl-labeled vesicles revealed the intermolecular fluorescence quenching efficiency between each spin-label positioned on TLL, and the lipid membrane. ESR exposure and fluorescence quenching data show that TLL associates closer to the negatively charged PG surface than the zwitterionic PC surface, and binds to both POPG LUV and POPC SUV predominantly through the concave backside of TLL opposite the active site, as revealed by the contact residues K74C-SL, R209C-SL, and T192C-SL. This orientation is significantly different compared to that on the POPG SUV, and might explain the differences in activation of the lipase. Evidently, both the charge and accessibility (curvature) of the vesicle surface determine the TLL orientation at the phospholipid interface.

Binding of Thermomyces (Humicola) lanuginosa lipase to the mixed micelles of cis-parinaric acid/NaTDC.

The binding of Thermomyces lanuginosa lipase and its mutants [TLL(S146A), TLL(W89L), TLL(W117F, W221H, W260H)] to the mixed micelles of cis-parinaric acid/sodium taurodeoxycholate at pH 5.0 led to the quenching of the intrinsic tryptophan fluorescence emission (300-380 nm) and to a simultaneous increase in the cis-parinaric acid fluorescence emission (380-500 nm). These findings were used to characterize the Thermomyces lanuginosa lipase/cis-parinaric acid interactions occurring in the presence of sodium taurodeoxycholate. The fluorescence resonance energy transfer and Stern-Volmer quenching constant values obtained were correlated with the accessibility of the tryptophan residues to the cis-parinaric acid and with the lid opening ability of Thermomyces lanuginosa lipase (and its mutants). TLL(S146A) was found to have the highest fluorescence resonance energy transfer. In addition, a TLL(S146A)/oleic acid complex was crystallised and its three-dimensional structure was solved. Surprisingly, two possible binding modes (sn-1 and antisn1) were found to exist between oleic acid and the catalytic cleft of the open conformation of TLL(S146A). Both binding modes involved an interaction with tryptophan 89 of the lipase lid, in agreement with fluorescence resonance energy transfer experiments. As a consequence, we concluded that TLL(S146A) mutant is not an appropriate substitute for the wild-type Thermomyces lanuginosa lipase for mimicking the interaction between the wild-type enzyme and lipids.