A Keggin Al13 -Montmorillonite Modified Separator Retards the Polysulfide Shuttling and Accelerates Li-Ion Transfer in Li-S Batteries.

The commercialization of Li-S batteries as a promising energy system is terribly impeded by the issues of the shuttle effect and Li dendrite. Keggin Al13 -pillared montmorillonite (AlMMT), used as the modified film of the separator together with super-P and poly (vinylidene fluoride) (PVDF), has a good chemical affinity to lithium polysulfide (LiPS) to retard the polysulfide shuttling, excellent electrolyte wettability, and a stable structure, which can improve the rate capability and cycling stability of Li-S batteries. Density function theory (DFT) calculations reveal the strong adsorption ability of AlMMT for LiPS. Consequently, the modified film allows Li-S batteries to reach 902 mAh g-1 at 0.2C after 200 cycles and 625 mAh g-1 at 1C after 1000 cycles. More importantly, a high reversible areal capacity of 4.04 mAh cm-2 can be realized under a high sulfur loading of 6.10 mg cm-2 . Combining the merits of rich resources of montmorillonite, prominent performance, simple operation and cost-effectiveness together, this work exploits a new route for viable Li-S batteries for applications.

Self-Assembly of Silicon Nanotubes Driven by a Biphasic Transition from the Natural Mineral Montmorillonite in Molten Salt Electrolysis.

Silicon nanotubes (SNTs) have been considered as promising anode materials for lithium-ion batteries (LIBs). However, the reported strategies for preparing SNTs generally have special requirements for either expensive templates or complex catalysts. It is necessary to explore a cost-effective and efficient approach for the preparation of high-performance SNTs. In this work, a biphasic transformation strategy involving "solid-state reduction" and "dissolution-deposition" in molten salts is developed to prepare SNTs using montmorillonite as a precursor. The rod-like intermediate of silicon-aluminum-calcium is initially reduced in solid state, which then triggers the continuous dissolution and deposition of calcium silicate in the inner space of the intermediate to form a hollow structure during the subsequent reduction process. The transition from solid to liquid is crucial for improving the kinetics of deoxygenation and induces the self-assembly of SNTs during electrolysis. When the obtained SNTs is used as anode materials for LIBs, they exhibit a high capacity of 2791 mAh g-1 at 0.2 A g-1 , excellent rate capability of 1427 mA h g-1 at 2 A g-1 , and stable cycling performance with a capacity of 2045 mAh g-1 after 200 cycles at 0.5 A g-1 . This work provides a self-assembling, controllable, and cost-effective approach for fabricating SNTs.

Comparison of Structural, Water-Retaining and Sorption Properties of Acrylamide-Based Hydrogels Cross-Linked by Physical and Chemical Methods.

Two series of hydrogels based on acrylamide and its copolymers with acrylonitrile and acrylic acid were synthesized by two cross-linking methods - chemical (using N,N'-methylene bis-acrylamide) and physical (using montmorillonite (MMT)) ones. The structure of the gels was characterized by Fourier Transform Infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The swelling and sorption properties were analyzed as a function of both the monomer composition and the cross-linking method. The shift of the band corresponding to Si-O (995-1030 cm-1 ) confirmed the formation of intercalation structures for MMT-cross-linked gels. Moreover, physically cross-linked gels demonstrated a non-monotonic dependence of the swelling degree on the MMT concentration, and acrylamide-acrylic acid copolymer MMT-cross-linked gels showed pH sensitivity and the highest swelling degree of 150 g/g. The highest sorption capacity towards cadmium(II) ions was demonstrated by acrylamide-acrylic acid copolymer gels, both covalently cross-linked (30 mg/g) and MMT-cross-linked (8.9 mg/g).

Differential Adsorption of Dissolved Organic Matter and Phosphorus on Clay Mineral in Water-Sediment System.

Lake sediments connection to the biogeochemical cycling of phosphorus (P) and carbon (C) influences streamwater quality. However, it is unclear whether and how the type of sediment controls P and C cycling in water. Here, the adsorption behavior of montmorillonite (Mt) with different interlayer cations (Na+, Ca2+, or Fe3+) on dissolved organic matter (DOM) and P was investigated to understand the role of Mt in regulating the organic carbon-to-phosphate (OC/P) ratio within freshwater systems. The adsorption capacity of Fe-Mt for P was 3.2-fold higher than that of Ca-Mt, while it was 1/3 lower for DOM. This dissimilarity in adsorption led to an increased OC/P in Fe-Mt-dominated water and a decreased OC/P in Ca-Mt-dominated water. Moreover, an in situ atomic force microscope and high-resolution mass spectrometry revealed molecular fractionation mechanisms and adsorptive processes. It was observed that DOM inhibited the nucleation and crystallization processes of P on the Mt surface, and P affected the binding energy of DOM on Mt through competitive adsorption, thereby governing the interfacial P/DOM dynamics on Mt substrates at a molecular level. These findings have important implications for water quality management, by highlighting the role of clay minerals as nutrient sinks and providing new strategies for controlling P and C dynamics in freshwater systems.

Catalytic pyrolysis of fish waste oil using ZSM-5 catalyst for the production of renewable biofuel.

This present study enlightens the eco-friendly green synthesis of ZSM-5 from natural clay montmorillonite, and its proper incorporation with 'Ni'. Nickle (Ni) was wet impregnated onto HZSM-5 and the resulting catalyst was characterized by various techniques including XRD, BET, N2 Sorption Studies, TPD, SEM and TEM techniques. The SEM images revealed the uniform distribution of Ni over HZSM-5 zeolite catalyst and the XRD results indicated the undistorted crystalline structure of HZSM-5 even after impregnation of Ni. The latter part of the work concentrates on the strength of the catalyst in cracking oil derived from discarded fish parts. Discarded fish waste was pyrolyzed to obtain the fish oil, which was then used for cracking studies. The fish oil was efficiently converted (99% conversion) by Ni/ZSM5 (50 wt %) and yielded 70% liquid fractions, which formed gasoline (78.6%), kerosene (12.3%) and diesel (9.1%). The research is a complete parcel to examine the working potential of the produced biofuel in pre-existing engines. The quality of gasoline fraction was tested according to ASTM standards, which showed that the heating value was slightly lower compared to fossil gasoline. The torque and brake fuel consumption were also examined and it indicated that the fish oil derived gasoline fuel may need to be mixed with the commercial gasoline to optimize its performance.

Ultrasonication-Assisted Synthesis of CuO-Decorated Montmorillonite K30 Nanocomposites for Photocatalytic Removal of Emerging Contaminants: A Response Surface Methodology Approach.

Environmental pollution is increasing worldwide due to population and industrialization. Among the various forms of pollution, water pollution poses a significant challenge in contemporary times. In this study, we synthesized CuO-decorated montmorillonite K30 (MK30) nanosheets via a simple ultrasonication technique. The structural, morphological, compositional, and optical properties of the synthesized nanocomposites were evaluated using advanced instrumentation techniques. The morphology of CuO was cubic and cubic CuO evenly designed on the MK30, which was proved by Field Emission Scanning Electron Microscopy (FESEM). The adsorption photocatalytic activity of the synthesized cubic CuO/MK30 composites was examined through the degradation of MB under visible light irradiation. The apparent reaction rate constant of 20% CuO/MK30 was 12.5 folds higher than that of CuO. These conditions included a catalyst dosage ranging from 5 to 15 mg, a pH level ranging from to 3-11, and a pollutant concentration ranging from 5 to 20 mg/L. The optimal conditions for MB dye removal were determined using response surface methodology (RSM). A scavenger study of the composite was conducted and verified that •O2- and •OH radicals play an important role in the degradation process. This investigation addressed the process of adsorption and potential removal pathways, with a particular emphasis on the role of functional groups. The environmentally friendly CuO/MK30 nanocomposites exhibited potential as photocatalysts for efficiently absorbing and degrading MB dye and TC drug pollutants. They represent promising candidates for the treatment of industrial wastewater, aiming to mitigate the environmental threats posed by organic pollutants.

Characteristics and Influence Factors of Pb(II) Adsorption by Graphene Oxide-Montmorillonite Composite.

This study presents the fabrication of a novel porous composite of graphene oxide-montmorillonite (GO-MMT) through the modification of montmorillonite using the freeze-drying method for the purpose of Pb removal. The characterization of the GO-MMT composite was conducted using scanning electron microscopy, Fourier transform infrared spectrometry, and X-ray diffraction. The results from batch adsorption experiments revealed that the GO-MMT composite exhibited a superior capacity for Pb removal compared to MMT. Furthermore, a single factor experiment confirmed that the dosage of the GO-MMT composite or GO, pH, temperature, and reaction time all significantly influenced the adsorption of Pb by the GO-MMT composite, MMT, or GO. This superiority can be attributed to the presence of oxygen-containing functional groups, the site-blocking effect, and the ion exchange mechanism exhibited by the GO-MMT composite.

NaH2PO4 synergizes with organic matter to stabilize chromium in tannery sludge.

Heavy metal stabilization is an effective method to treat chromium in tannery sludge. Here we show that mainly investigated NaH2PO4 (MSP) and organic matter (OM) to stabilize chromium in tannery sludge. The experimental investigation revealed that the addition of montmorillonite (MMT) and MSP samples showed a significant increase in the percentage of reducible and oxidizable Cr in the former compared to the samples with the addition of MMT. This is attributed to the formation of Cr-O bond, which allows the MSP to undergo an inner-sphere complexation reaction with the metal oxide of Cr via ligand exchange. Significantly, the MSP moiety adsorbs on the surface of OM through monodentate, which increases the adsorption sites of OM for Cr6+ and promotes the reduction of Cr6+ to Cr3+. Moreover, PO43- reacts with Cr3+ to produce CrPO4 precipitation, thus reducing the free Cr3+ content. Finally, DFT calculations confirmed that a ternary system is formed between PO43-, OM, and Cr, and the binding energy is negative, which indicated that PO43- could co-stabilize Cr with OM.

The Effect of pH on the Viscoelastic Response of Alginate-Montmorillonite Nanocomposite Hydrogels.

Ionically cross-linked alginate hydrogels are used in a wide range of applications, such as drug delivery, tissue engineering, and food packaging. A shortcoming of these gels is that they lose their strength and degrade at low pH values. To develop gels able to preserve their integrity in a wide range of pH values, Ca-alginate-montmorillonite nanocomposite gels are prepared, and their chemical structure, morphology, and mechanical response are analyzed. As the uniformity of nanocomposite gels is strongly affected by concentrations of MMT and CaCl2, it is revealed that homogeneous gels can be prepared with 4 wt.% MMT and 0.5 M CaCl2 at the highest. The viscoelastic behavior of nanocomposite gels in aqueous solutions with pH = 7 and pH = 2 is investigated by means of small-amplitude compressive oscillatory tests. It is shown that Ca-alginate-MMT nanocomposite gels preserve their integrity while being swollen at pH = 2. The experimental data are fitted by a model with only two material parameters, which shows that the elastic moduli increase linearly with a concentration of MMT at all pH values under investigation due to formation of physical bonds between alginate chains and MMT platelets. The presence of these bonds is confirmed by ATR-FTIR spectroscopy. The morphology of nanocomposite gels is studied by means of wide-angle X-ray diffraction, which reveals that intercalation of polymer chains between clay platelets increases the interlayer gallery spacing.

Adsorption of Ciprofloxacin on Clay Minerals in Argentinian Santa Rosa-Corrientes Soils.

The presence of antibiotics in soils is increasing drastically in last decades due to the intensive farming industry and excessive human consumption. Clay minerals are one of the soil components with great adsorption capacity for organic pollutants. The study of interactions between antibiotics and mineral surfaces will give us scientific knowledge of these pollutants through soils. In this work, we study the adsorption of the antibiotic ciprofloxacin in the clay mineral fraction of soils from the Argentinian zone of Santa Rosa (Corrientes), in a collaborative research of experiments and atomistic modelling calculations of the intercalation of ciprofloxacin in the interlayer space of montmorillonite. Adsorption and desorption isotherms were performed and compared with different isotherm models. Additionally, enthalpy, entropy, and free energy were determined from equilibrium constants at a function of temperature. All these experiments and calculations lead to the conclusions that two adsorption types of ciprofloxacin are found on clay minerals: one weakly sorbed that is released during the desorption experiments, and other one strongly joined that remains in the soil.

Neuron-Like Silicone Nanofilaments@Montmorillonite Nanofillers of PEO-Based Solid-State Electrolytes for Lithium Metal Batteries with Wide Operation Temperature.

Poly(ethylene oxide) (PEO)-based composite solid electrolytes (CSEs) are promising to accelerate commercialization of solid-state lithium metal batteries (SSLMBs). Nonetheless, this is hindered by the CSEs' limited ion conductivity at room temperature. Here, we propose design, synthesis, and application of the bioinspired neuron-like nanofillers for PEO-based CSEs. The neuron-like superhydrophobic nanofillers are synthesized by controllably grafting silicone nanofilaments onto montmorillonite nanosheets. Compared to various reported fillers, the nanofillers can greatly improve ionic conductivity (4.9×10-4 S cm-1, 30 °C), Li+ transference number (0.63), oxidation stability (5.3 V) and mechanical properties of the PEO-based CSEs because of the following facts. The distinctive neuron-like structure and the resulting synaptic-like connections establish numerous long-distance continuous channels over various directions in the PEO-based CSEs for fast and uniform Li+ transport. Consequently, the assembled SSLMBs with the CSEs and LiFePO4 or NCM811 cathodes display superior cycling stability over a wide temperature range of 50 °C to 0 °C. Surprisingly, the pouch batteries with the large-scale prepared CSEs kept working after being repeatedly bent, folded, cut or even punched in air. We believe that design of neuron-like nanofillers is a viable approach to produce CSEs with high room temperature ionic conductivity for SSLMBs.

Nanoscale Interactions of Humic Acid and Minerals Reveal Mechanisms of Carbon Protection in Soil.

The concentrations of terrestrially sourced dissolved organic matter (DOM) have expanded throughout aquatic ecosystems in recent decades. Although sorption to minerals in soils is one major pathway to sequestrate soil organic matter, the mechanisms of organic matter-mineral interactions are not thoroughly understood. Here, we investigated the effect of calcium phosphate mineralization on humic acid (HA) fixation in simulated soil solutions, either with or without clay mineral montmorillonite (Mt). We found that Mt in solution promoted nucleation and crystallization of calcium phosphate (CaP) due to amorphous calcium phosphate clustering and coalescence on Mt surface, which contributed to the long-term persistence and accumulation of HA. Organic ligands with specific chemical groups on HA have higher binding energies to CaP-Mt than to CaP/Mt, according to dynamic force spectroscopy observations. Moreover, CaP-Mt formed in solution showed a great capacity for HA adsorption with a maximum adsorption quantity of 156.89 mg/g. Our findings directly support that Mt is crucial for DOM sequestration by facilitating CaP precipitation/transformation. This has an impact on how effectively we understand the long-term turnover of DOM and highlights knowledge gaps that might assist in resolving essential soil C sequestration issues.

Acid-Base Properties of Cis-Vacant Montmorillonite Edge Surfaces: A Combined First-Principles Molecular Dynamics and Surface Complexation Modeling Approach.

Montmorillonite layer edge surfaces have pH-dependent properties, which arises from the acid-base reactivity of their surface functional groups. Edge surface acidity (with intrinsic reaction equilibrium constant, pKa) is a chemical property that is affected by crystal structure. While a cis-vacant structure predominates in natural montmorillonites, prior molecular-level studies assume a centrosymmetric trans-vacant configuration, which potentially leads to an incorrect prediction of montmorillonite acid-base surface properties. We computed intrinsic acidity constants of the surface sites of a montmorillonite layer with a cis-vacant structure using the first-principles molecular dynamics-based vertical energy gap method. We evaluated pKa values for both non-substituted and Mg-substituted layers on common edge surfaces (i.e., surfaces perpendicular to [010], [01̅0], [110], and [1̅1̅0] crystallographic directions). The functional groups ≡Si(OH), ≡Al(OH2)2/≡Al(OH)(OH2), and ≡SiO(OH)Al sites on surfaces perpendicular to [010] and [01̅0] and ≡Si(OH)U, ≡Si(OH)L, ≡Al(OH2), and ≡Al(OH2)2 on surfaces perpendicular to [110] and [1̅1̅0] determine the proton reactivity of non-substituted cis-vacant edge surfaces. Moreover, the structural OH sites on edge surfaces had extremely high pKa values, which do not show reactivity at a common pH. Meanwhile, Mg2+ substitution results in an increase in pKa values at local or adjacent sites, in which the effect is limited by the distance between the sites. A surface complexation model was built with predicted pKa values, which enabled us to predict surface properties as a function of pH and ionic strength. Edge surface charge of both trans- and cis-vacant models has little dependence on Mg2+ substitutions, but the dependence on the crystal plane orientation is strong. In particular, at pH below 7, edge surfaces are positively or negatively charged depending on their orientation. Implications of these findings on contaminant adsorption by smectites are discussed.

Fluorescent and Electrochemical Sensor Based on Basic Red 9 Dye Functionalised Graphene Oxide-Montmorillonite Composite for Selective Detection of Cerium (III) Ion.

In this work, graphene oxide (GO) has been prepared from used dry cells using modified Hummer's method and encapsulated with montmorillonite clay. To enhance its electrical property, the GO-MMT composite has been functionalised with Basic Red 9 dye. The sensor was characterized by various spectroscopic techniques like FT-IR spectroscopy, PXRD, SEM analysis, etc. Basic Red 9 dye functionalised GO-MMT composite has been employed for fluorescent and electrochemical detection of Ce3+ ion. The fluorescent turn-on sensing is sensitive, reversible and free from interference from other metal ions. The detection of Ce3+ ion by the sensor was also conducted in bovine serum albumin (BSA) medium. Pt electrode modified with the hybrid sensor produces excellent electrochemical change in presence of Ce3+ ion through cyclic voltammetry and square wave voltammetry technique. The limit of detection (LOD) from fluorescence spectroscopy, cyclic voltammetry and square wave voltammetry were calculated to be 0.6556 × 10- 9 M, 1.232 × 10- 9 M and 1.923 × 10- 9 M respectively.

Absorption behavior of polycarboxylate superplasticizer with different molecular structures on montmorillonite.

Polycarboxylate (PCE) is a high performance superplasticizer for modern concrete. With the high quality sand becoming precious, more and more low quality sands are used in concrete. However, low quality sands generally contain a relatively high content of montmorillonite (MMT), which could seriously reduce the efficiency of PCE. In order to develop PCE suitable for concrete with low quality sands, the absorption behavior on MMT of PCE with different side chains and acid/ether ratio was investigated. In order to explore the effect of MMT on PCE, two macromonomers were selected, isoprene glycol ether 400(TPEG400) and isoprene glycol ether 2400 (TPEG2400), to synthesize six long and short side chain comb-type PCEs with acid-ether ratios of 1.5:1, 2.5:1 and 3.5:1, respectively. The MMT tolerance mechanism of comb-type PCE in MMT-containing cement slurry was examined by FT-IR, DLS, TOC and other analysis. The PCE with long side chain is much easier to be inserted into the layered structure of MMT, resulting in intercalation absorption. The absorption amount of two kinds of side chain PCE on the MMT particles decreased as the acid ether ratio increases. PCE with long side chains showed shear-thickening properties in MMT-containing cement slurry, on the contrary, short side chains showed shear-thinning properties.

Enhanced generation of oxysulfur radicals by the BiOBr/Montmorillonite activated sulfite system: Performance and mechanism.

The easily synthesized, cost-effective, and stable photocatalysts for sulfite activation are always required for the enhancement of organic contaminants degradation. Herein, the facile coprecipitation synthesis of Bismuth oxybromide (BiOBr)/Montmorillonite (MMT) was reported, which could activate sulfite (SO32-/HSO3-) under sunlight and accelerate the catalytic performance more effectively than pristine BiOBr. After adding sulfite to the photocatalysis system, the photodegradation efficiency of atrazine (ATZ) achieved 73.7% ± 1.5% after 5 min and 94.4% ± 1.6% after 30 min of sunlight irradiation with BiOBr/MMT. The BiOBr/MMT-sulfite system also presented remarkable photocatalytic performance to eliminate various contaminants, including ciprofloxacin, sulfadiazine, tetracycline, and carbamazepine. The various features of the photocatalyst materials were studied, including their surface morphology, structure, optical properties, and composition. The results illustrated that by adding MMT, the bandgap of the pristine BiOBr was reduced and the surface area was increased, which led to an increased ability to adsorb materials. Results of various influence factors showed this enhanced system had satisfactory and stable removal performance of ATZ in the pH range of 3.0-6.5, but HPO42- had a strong negative effect on the system performance. Oxysulfur radicals (SO5·- and SO4·-), h+, and 1O2 were discovered as the prevailing active species in the BiOBr/MMT-sulfite system. The proposed degradation mechanism of this photocatalyst-enhanced system revealed that sulfite adsorption on the surface of the photocatalyst played a vital role during the initial phase, and the degradation pathway of ATZ was discussed. This study provides a new synthesis strategy of a photocatalyst for sulfite activation and expands the potential uses of Bi-based photocatalysts in degrading difficult-to-remove organic pollutants.

Interfacial charge transfer of Carrisa edulis fruit extract capped Co3O4 nanoparticles on the surface of MK30: An efficient photocatalytic removal of methylthioninium chloride and tetracycline organic pollutants.

The in-depth usage of organic pollutants by pharmaceutical industries constitutes a major contaminant to the bodies of water due to their solubility, great mobility, ability to get attached to water bodies for a long period of time, and low biodegradability. Due to these, it may further cause disease and change the ecosystem of aqueous and other living organisms. Accordingly, effective removal of organic contaminants from waste water is a vital step in reducing the hazards. Photocatalysis is a potential technique for removing hazardous organic pollutants from wastewater. In this work, a simple ultra-sonication assisted approach, a series of Carrisa edulis fruit extract capped Co3O4 nanoparticles decorated on Montmorillonite K30 nanosheets (Co3O4/MK30) were prepared. The inherent physicochemical appearance and optical properties of as-prepared nanomaterials were investigated using a variety of analytical techniques. TEM analysis depicted the spherical shape of the Co3O4 NPs with the size of 11.25 nm. The degradation of methylthioninium chloride as a dye and tetracycline drug pollutants has been investigated in this study using individual and simultaneous photocatalysis systems in the presence of pure Co3O4 NPs and different ratios of Co3O4/MK30 nanocomposites. Owing to the generation of OH and O2 radicals, the 20% loaded Co3O4 on MK30 had the best photocatalytic performance of methylthioninium chloride (98.12%) and tetracycline degradation (87.4%), on exposing it to visible light. This research introduces a new design for MK30-based nanomaterials and proposes its use in environmental challenges.

Influence of organic cosolvents on hexabromobenzene degradation in solution by montmorillonite-templated subnanoscale zero-valent iron.

Organic cosolvents are commonly used to increase the dissolution of poorly water-soluble organic pollutants into aqueous solutions during environmental remediation. In this study, the influences of five organic cosolvents on hexabromobenzene (HBB) degradation catalyzed by one typical reactive material montmorillonite-templated subnanoscale zero-valent iron (CZVI) were investigated. The results demonstrated that all cosolvents promoted HBB degradation but the degree of promotion was different for different cosolvents, which was associated with inconsistent solvent viscosities, dielectric constant properties, and the extent of interactions between cosolvents with CZVI. Meanwhile, HBB degradation was highly dependent on the volume ratio of cosolvent to water, which increased in the range of 10%-25% but persistently decreased in the range of more than 25%. This might be due to the fact that the cosolvents increased HBB dissolution at low concentrations but reduced the protons supplied by water and the contact between HBB with CZVI at high concentrations. In addition, the freshly-prepared CZVI had higher reactivity to HBB than the freeze-dried CZVI in all water-cosolvent solutions, probably because freeze-drying reduced the interlayer space of CZVI and thus the contact probability between HBB and active reaction sites. Finally, the CZVI-catalyzed HBB degradation mechanism was proposed as the electron transfer between zero-valent iron and HBB, which led to the formation of four debromination products. Overall, this study provides helpful information for the practical application of CZVI in the remediation of persistent organic pollutants in the environment.

ROS generation and p-38 activation contribute to montmorillonite-induced corneal toxicity in vitro and in vivo.

BACKGROUND: Montmorillonite (Mt) and its derivatives are now widely used in industrial and biomedical fields. Therefore, safety assessments of these materials are critical to protect human health after exposure; however, studies on the ocular toxicity of Mt are lacking. In particular, varying physicochemical characteristics of Mt may greatly alter their toxicological potential. To explore the effects of such characteristics on the eyes, five types of Mt were investigated in vitro and in vivo for the first time, and their underlying mechanisms studied. RESULTS: The different types of Mt caused cytotoxicity in human HCEC-B4G12 corneal cells based on analyses of ATP content, lactate dehydrogenase (LDH) leakage, cell morphology, and the distribution of Mt in cells. Among the five Mt types, Na-Mt exhibited the highest cytotoxicity. Notably, Na-Mt and chitosan-modified acidic Na-Mt (C-H-Na-Mt) induced ocular toxicity in vivo, as demonstrated by increases corneal injury area and the number of apoptotic cells. Na-Mt and C-H-Na-Mt also induced reactive oxygen species (ROS) generation in vitro and in vivo, as indicated by 2',7'-dichlorofluorescin diacetate and dihydroethidium staining. In addition, Na-Mt activated the mitogen-activated protein kinase signaling pathway. The pretreatment of HCEC-B4G12 cells with N-acetylcysteine, an ROS scavenger, attenuated the Na-Mt-induced cytotoxicity and suppressed p38 activation, while inhibiting p38 activation with a p38-specific inhibitor decreased Na-Mt-induced cytotoxicity. CONCLUSIONS: The results indicate that Mt induces corneal toxicity in vitro and in vivo. The physicochemical properties of Mt greatly affect its toxicological potential. Furthermore, ROS generation and p38 activation contribute at least in part to Na-Mt-induced toxicity.

Microscopic insights into the variations of antibiotics sorption to clay minerals.

Understanding the adsorption behavior of antibiotic molecules on minerals is crucial for determining the environmental fate and transport of antibiotics in soils and waters. However, the microscopic mechanisms that govern the adsorption of common antibiotics, such as the molecular orientation during the adsorption process and the conformation of sorbate species, are not well understood. To address this gap, we conducted a series of molecular dynamics (MD) simulations and thermodynamics analyses to investigate the adsorption of two typical antibiotics, tetracycline (TET) and sulfathiazole (ST), on the surface of montmorillonite. The simulation results indicated that the adsorption free energy ranged from - 23 to - 32 kJ·mol-1, and - 9 to - 18 kJ·mol-1 for TET and ST, respectively, which was consistent with the measured difference of sorption coefficient (Kd) for TET-montmorillonite of 11.7 L·g-1 and ST-montmorillonite of 0.014 L·g-1. The simulations also found that TET was adsorbed through dimethylamino groups (85% in probability) with a molecular conformation vertical to the montmorillonite's surface, while ST was adsorbed through sulfonyl amide group (95% in probability) with vertical, tilted and parallel conformations on the surface. The results confirmed that molecular spatial orientations could affect the adsorption capacity between antibiotics and minerals. Overall, the microscopic adsorption mechanisms revealed in this study provide critical insights into the complexities of antibiotics adsorption to soil and facilitate the prediction of adsorption capacity of antibiotics on minerals and their environmental transport and fate. This study contributes to our understanding of the environmental impacts of antibiotic usage and highlights the importance of considering molecular-level processes when assessing the fate and transport of antibiotics in the environment.