RESUMO
Inorganic CsPbX3 perovskite quantum dots (PeQDs) show great potential in white light-emitting diodes (WLEDs) due to excellent optoelectronic properties, but their practical application is hampered by low photoluminescence quantum yield (PLQY) and especially poor stability. Herein, we developed an in-situ and general multidentate ligand passivation strategy that allows for CsPbX3 PeQDs not only near-unit PLQY, but significantly improved stability against storage, heat, and polar solvent. The enhanced optical property arises from high effectiveness of the multidentate ligand, diethylenetriaminepentaacetic acid (DTPA) with five carboxyl groups, in passivating uncoordinated Pb2+ defects and suppressing nonradiative recombination. First-principles calculations reveal that the excellent stability is attributed to tridentate binding mode of DTPA that remarkably boosts the adsorption capacity to PeQD core. Finally, combining the green and red PeQDs with blue chip, we demonstrated highly luminous WLEDs with distinctly enhanced operation stability, a wide color gamut of 121.3% of national television system committee, standard white light of (0.33,0.33) in CIE 1931, and tunable color temperatures from warm to cold white light readily by emitters' ratio. This study provides an operando yet general approach to achieve efficient and stable PeQDs for WLEDs and accelerates their progress to commercialization.
RESUMO
Homometallic titanium oxo clusters (TOC) are one of the most important groups of metal oxo clusters. In a previous article, TOC structures with carboxylato and phosphonato ligands were reviewed and categorized. This work is now extended to clusters with other ligands. Comparison of the different cluster types shows how the interplay between condensation of the titanium polyhedra by means of bridging oxygen atoms and the coordination characteristics of the ligands influences the cluster structures and allows working out basic construction principles of the cluster core.
RESUMO
A systematic series of four novel homo- and heteroleptic CuI photosensitizers based on tetradentate 1,10-phenanthroline ligands of the type X^N^N^X containing two additional donor moieties in the 2,9-position (X=SMe or OMe) were designed. Their solid-state structures were assessed by X-ray diffraction. Cyclic voltammetry, UV-vis absorption, emission and X-ray absorption spectroscopy were then used to determine their electrochemical, photophysical and structural features in solution. Following, time-resolved X-ray absorption spectroscopy in the picosecond time scale, coupled with time-dependent density functional theory calculations, provided in-depth information on the excited state electron configurations. For the first time, a significant shortening of the Cu-X distance and a change in the coordination mode to a pentacoordinated geometry is shown in the excited states of the two homoleptic complexes. These findings are important with respect to a precise understanding of the excited state structures and a further stabilization of this type of photosensitizers.
RESUMO
A straightforward method for the preparation of trisphosphinite ligands in one step, using only commercially available reagents (1,1,1-tris(4-hydroxyphenyl)ethane and chlorophosphines) is described. We have made use of this approach to prepare a small family of four trisphosphinite ligands of formula [CH3C{(C6H4OR2)3], where R stands for Ph (1a), Xyl (1b, Xyl = 2,6-Me2-C6H3), iPr (1c), and Cy (1d). These polyfunctional phosphinites allowed us to investigate their coordination chemistry towards a range of late transition metal precursors. As such, we report here the isolation and full characterization of a number of Au(I), Ag(I), Cu(I), Ir(III), Rh(III) and Ru(II) homotrimetallic complexes, including the structural characterization by X-ray diffraction studies of six of these compounds. We have observed that the flexibility of these trisphosphinites enables a variety of conformations for the different trimetallic species.
Assuntos
Compostos Organometálicos/química , Indicadores e Reagentes/química , Ligantes , Modelos Moleculares , Fosfinas/química , Difração de Raios XRESUMO
A significant number of isolable silylenes are currently known. They have quickly developed from laboratory curiosities to useful ligands in metal-mediated homogeneous catalysis. This includes their utilization in various catalytic transformations, such as C-C cross-coupling, cyclotrimerization, hydroformylation, borylation, deuteration, hydrosilylation, amination, hydrogenation, and transfer semi-hydrogenation reactions. Recent studies suggest that the silylene ligands surpass the steering properties of their phosphine and N-heterocyclic carbene (NHC) analogues and provide excellent chemo-, regio-, and stereoselectivites. Mechanistic studies suggest that their promoted performance of metal-mediated catalytic transformations results from a strong σ-donor character along with cooperative effects of their SiII centers. This Minireview covers the most recent advances in the field.
RESUMO
The title complex, [Cu(C5H10NS2)(C15H22BN6)] or (Tp(Me2))Cu(S2CNEt2), incorporating the classic Tp(Me2) scorpionate, is relevant to blue copper protein models and to Cu extraction from waste treatment and mine-tailing leachate. The IR and UV-Vis spectra are consistent with the crystal structure.
RESUMO
Lead halide perovskites have emerged as low-cost, high-performance optical and optoelectronic materials, however, their material stability has been a limiting factor for broad applications. Here, we demonstrate stable core-shell colloidal perovskite nanocrystals using a novel, facile and low-cost copolymer templated synthesis approach. The block copolymer serves as a confined nanoreactor during perovskite crystallization and passivates the perovskite surface by forming a multidentate capping shell, thus significantly improving its photostability in polar solvents. Meanwhile, the polymer nanoshell provides an additional layer for further surface modifications, paving the way to functional nanodevices that can be self-assembled or lithographically defined.
RESUMO
In this paper the multiple (re)programming of protein-DNA nanostructures comprising generation, deletion, and reprogramming on the same flavin-DNA-modified surface is introduced. This work is based on a systematic study of the binding affinity of the multi-ligand-binding flavoprotein dodecin on flavin-terminated DNA monolayers by surface plasmon resonance and quartz crystal microbalance with dissipation (QCM-D) measurements, surface plasmon fluorescence spectroscopy (SPFS), and dynamic AFM force spectroscopy. Depending on the flavin surface coverage, a single apododecin is captured by one or more surface-immobilized flavins. The corresponding complex binding and unbinding rate constants kon(QCM) = 7.7 × 10(3) M(-1)·s(-1) and koff(QCM) = 4.5 × 10(-3) s(-1) (Kd(QCM) = 580 nM) were determined by QCM and were found to be in agreement with values for koff determined by SPFS and force spectroscopy. Even though a single apododecin-flavin bond is relatively weak, stable dodecin monolayers were formed on flavin-DNA-modified surfaces at high flavin surface coverage due to multivalent interactions between apododecin bearing six binding pockets and the surface-bound flavin-DNA ligands. If bi- or multivalent flavin ligands are adsorbed on dodecin monolayers, stable sandwich-type surface-DNA-flavin-apododecin-flavin ligand arrays are obtained. Nevertheless, the apododecin flavin complex is easily and quantitatively disassembled by flavin reduction. Binding and release of apododecin are reversible processes, which can be carried out alternatingly several times to release one type of ligand by an external redox trigger and subsequently replace it with a different ligand. Hence the versatile concept of reprogrammable functional biointerfaces with the multi-ligand-binding flavoprotein dodecin is demonstrated.
Assuntos
Biotecnologia/métodos , Flavoproteínas/metabolismo , Nanotecnologia/métodos , Adsorção , Apoproteínas/química , Apoproteínas/metabolismo , DNA/química , DNA/metabolismo , Flavinas/química , Flavinas/metabolismo , Flavoproteínas/química , Ouro/química , Proteínas Imobilizadas/química , Proteínas Imobilizadas/metabolismo , Cinética , Ligantes , Ligação Proteica , Propriedades de SuperfícieRESUMO
The aim of this study was to evaluate acyclic ligands which can be applied for labeling proteins such as monoclonal antibodies and their fragments with scandium radionuclides. Recently, scandium isotopes (47Sc, 44Sc) are more available and their properties are convenient for radiotherapy or PET imaging. They can be used together as "matched pair" in theranostic approach. Because proteins denaturize at temperature above 42 °C, ligands which efficiently form complexes at room temperature, are necessary for labelling such biomolecules. For complexation of scandium radionuclides open chain ligands DTPA, HBED, BAPTA, EGTA, TTHA and deferoxamine have been chosen. We found that the ligands studied (except HBED) form strong complexes within 10 min and that the radiolabelling yield varies between 96 and 99 %. The complexes were stable in isotonic NaCl, but stability of 46Sc-TTHA, 46Sc-BAPTA and 46Sc-HBED in PBS buffer was low, due to formation by Sc3+stronger complexes with phosphates than with the studied ligands. From the radiolabelling studies with n.c.a. 47Sc we can conclude that the most stable complexes are formed by the 8-dentate DTPA and EGTA ligands.
RESUMO
Synergistic effects between a transition metal and an appropriate ligand are required to promote a desired catalytic reaction. Ancillary ligands, provided by the versatile functionality of certain elements, give rise to an almost infinite potential for catalytic applications. Recently, the study of the synergistic effect between transition metals and boron has become easy on account of the development of various rigid multidentate frameworks. In this Review, we mainly focus on the chemistry of σ-acceptor (Z-type) borane ligands, particularly the key achievements of their unique reactivity and catalytic applications. Conceptually, the unique character of σ-acceptor borane ligands provides a new strategy for developing remarkable reactivity and novel catalytic applications. This study discusses recent developments in the field in this context. The chemistry of boron-based multidentate ligands that involve a covalent M-B bond such as the boryl ligand (-BR2), in which a boron moiety serves as a strong electron-donating ligand, is also rapidly developing. The effect of the boryl ligand on a metal center is totally different from that of the borane (-BR3) ligand, and different boron-based functionalities confer opposing electronic properties to the metal center. The interesting character of boryl-based chelating ligands augments their unique coordination chemistry, which is also summarized in this context.
RESUMO
A new method to prepare novel semi-rigid multidentate ligands containing nitrogen atom, to coordinate with rhenium and technetium, was established. The method was based on formylation of substituted anilines, followed by Mannich reaction with glycine and paraformaldehyde. The method was very promising to design ligands of various molecular structures (L1-L5) to coordinate with rhenium metal ions. The complexes were prepared through ligand exchange with the complex ReOCl3(PPh3)2, giving new complex of the structure ReOCl3L(1-5). The prepared ligands and complexes were identified by the use of UV-vis, and infrared absorption spectrometric techniques, elemental analysis, molecular weight determination by depression of freezing point. These ligands were labeled with 99mTc pertechnetate, and the labeling efficiency of the complexes was measured using a well type scintillation gamma counter equipment and obtained a good yield.