RESUMEN
In the context of dietary transition, blending animal-source protein with plant-source protein offers a promising way to exploit their nutritional complementarity. This study investigates the feasibility of formulating an iron-rich hybrid food product blending plant-source and animal-source protein ingredients for iron-deficient populations. Using a commercial 3D-food printer, two different-shaped products composed mainly of pork and chicken liver and red lentils were designed. After baking at 180 °C with 70% steam, the 3D-printed products were packed under two different modified atmospheres (MAP): O2-MAP (70% oxygen + 30% carbon dioxide) and N2-MAP (70% nitrogen + 30% carbon dioxide) and stored at 4 °C. pH, water content, aw, lipid oxidation, heme iron and non-heme iron contents and textural properties were measured after 0, 7, 14 and 21 days in storage. After 21 days in storage, the 3D-printed hybrid products had an iron content of around 13 mg/100 g, regardless of the product form and packaging method. However, O2-MAP products showed significant (p < 0.05) time-course changes from day 0 to day 7, i.e., an increase in lipid oxidation, a decrease in heme iron content and an increase in product hardness, gumminess and chewiness. This work opens prospects for developing hybrid food products that upvalue animal by-products.
RESUMEN
Fish industry operators have to process fish that arrive at various postmortem times. Postmortem time constrains processing and impacts product quality, safety, and economic value. The objective identification of biomarkers is desirable to predict the postmortem day of aging and this requires a comprehensive longitudinal characterisation of postmortem aging. We analysed the postmortem aging process in trout over a 15-day window. Quantitative physicochemical measurements (pH, colour, texture, aw, proteolysis, and myofibrillar protein solubility) performed on the same fish over time revealed the levels of protein denaturation, solubility, and pH, among other parameters, change very little when assessed by conventional chemical methods. Histological analyses were performed on thin sections and revealed fibre ruptures after 7 days of storage on ice. Ultrastructures were observed by transmission electronic microscopy (TEM) and revealed that sarcomere disorganisation occurred more often after 7 days of storage. Label-free FTIR micro-spectroscopy combined with a SVM model accurately predicted the postmortem time. Spectra-based PC-DA models also enable the identification of biomarkers corresponding to Day 7 and Day 15 postmortem. This study provides insights on postmortem aging and raises prospects for the rapid assessment of trout's freshness status from label-free imaging.
RESUMEN
The use of additive manufacturing is growing in multiple sectors, including food, and its scientific and technological challenges form the subject of much ongoing research. One current hurdle is the implementation of the 3D printing process for meat protein matrices. This article gives an overview of the various 3D printers used to study the printability properties of foods and presents the development of a 3D printer designed to print food protein gels. Printhead development (flow rate and temperature control) and the modifications made to the printing plate (temperature control) are described and discussed in relation to the constraints highlighted in a first prototype. A second, developed prototype was characterized and validated. This last phase showed perfect control of the prototype in the purging of the extrusion system, the flow rate, the calibration and the displacement of the printhead, along with the temperatures at both printhead and plate. A study of the printed gels also revealed good repeatability of the printed gel geometry and pointed to new ways to improve the process. In the near future, the protein gels that will be printed from this prototype will serve as a base for texturizer-free functional foods for people with chewing difficulties.
RESUMEN
Smoked fish fillets are pre-salted as a food conservation and quality preservation measure. Here we investigated biochemical and sensory aspects of smoked salmon fillets. Left-side salmon fillets were dry-salted while the right-side fillets underwent a mixed salting method consisting of an injection of saturated brine followed by surface application of dry salt. After 6 h of salting, all the fillets were smoked. At each step of the process, quality was evaluated using instrumental measurements (pH, color, texture, water content, salt content, aw), and lipid distribution was visualized by MRI. Mixed-salted fillets had a higher salt content than dry-salted fillets and variability in salt distribution was dependent on the salting process. However, these variations had no effect on pH, color or texture, which showed similar values regardless of salting method. Fatty areas had a lower salt content due to slower diffusion of aqueous salt solutions through them. Mixed salting speeds up the salting of the muscle without significantly affecting the quality traits of the salmon fillet.
RESUMEN
Tenderness is a major factor in consumer perception and acceptability of beef meat. Here we used a laboratory tumbling simulator to investigate the effectiveness of the tumbling process in reducing the toughness of raw beef cuts. Twelve Semitendinosus beef muscles from cows were tumbled according to four programs: T1 (2500 consecutive compression cycles (CC), for about 3 h), T2 (6000 CC, about 7.5 h), T3 (9500 CC, about 12 h), and T4 (13,000 CC, about 16 h). The effect of tumbling on the toughness of raw meat was assessed using compression tests (stresses measured at 20% and 80% of deformation ratios) and microscopic observations made at the periphery and centre of meat samples, and compared against non-tumbled controls. Longer tumbling times significantly reduced the stresses measured at 20% and 80% compression rates, which reflected the toughness of muscle fibres and connective tissue, respectively. At the microscopic level, longer tumbling times led to reduced extracellular spaces, increased degradation of muscle structure, and the emergence of amorphous zones. A 12-h tumbling protocol ultimately makes the best compromise between the process time demand and toughness reduction in beef Semitendinosus meat pieces.
RESUMEN
A reaction-diffusion mathematical model has been developed to predict the gastric digestion of meat proteins. The model takes into account pepsin diffusion and proton diffusion in bolus particles and the pH buffering capacity of meat. The computations show that the size of bolus particles and the change in gastric pH have a substantial effect on the percentage of protein digested in the stomach and that the pH buffering capacity of meat has to be accounted for to properly calculate the gastric digestibility of meat. The intensity of surface transfers between stomach fluid and bolus particles has a significant impact on protein digestibility, whereas the variation in pepsin content in the stomach between individuals appears to have little effect on protein digestibility. From a nutritional standpoint, the simulations show that meat protein digestibility is high under normal physiological stomach conditions. However, in a situation where masticatory capacity, hydrochloric acid secretion and gastric motor function performances are reduced, such as with advancing age, protein digestibility rapidly decreases, ultimately leading to near-zero digestibility value in the stomach in extreme cases.
Asunto(s)
Mucosa Gástrica/metabolismo , Proteínas/metabolismo , Animales , Difusión , Digestión , Concentración de Iones de Hidrógeno , Carne/análisis , Modelos Biológicos , Tamaño de la Partícula , Pepsina A/química , Pepsina A/metabolismo , Proteínas/química , Estómago/químicaRESUMEN
Temperature, salt and water contents are key processing factors in dry-cured ham production. They affect how proteolysis, lipid oxidation, structure and texture evolve, and thus determine the sensory properties and final quality of dry-cured ham. The aim of this study was to quantify the interrelationships and the time course of (i) proteolysis, (ii) lipid oxidation, (iii) five textural parameters: hardness, fragility, cohesiveness, springiness and adhesiveness and (iv) four structural parameters: fibre numbers, extracellular spaces, cross section area, and connective tissue area, during the dry-cured ham process. Applying multiple polynomial regression enabled us to build phenomenological models relating proteolysis, salt and water contents to certain textural and structural parameters investigated. A linear relationship between lipid oxidation and proteolysis was also established. All of these models and relationships, once combined with salt penetration, water migration and heat transfer models, can be used to dynamically simulate all of these phenomena throughout dry-cured ham manufacturing.
Asunto(s)
Manipulación de Alimentos/métodos , Metabolismo de los Lípidos , Productos de la Carne/análisis , Proteolisis , Animales , Fenómenos Químicos , Modelos Lineales , Análisis Multivariante , Sales (Química)/análisis , Porcinos , Sustancias Reactivas al Ácido Tiobarbitúrico/análisis , Agua/análisisRESUMEN
Throughout dry-cured ham production, salt and water content, pH and temperature are key factors affecting proteolysis, one of the main biochemical processes influencing sensory properties and final quality of the product. The aim of this study was to quantify the effect of these variables (except pH) on the time course of proteolysis in laboratory-prepared pork meat samples. Based on a Doehlert design, samples of five different types of pork muscle were prepared, salted, dried and placed at different temperatures, and sampled at different times for quantification of proteolysis. Statistical analysis of the experimental results showed that the proteolysis index (PI) was correlated positively with temperature and water content, but negatively with salt content. Applying response surface methodology and multiple linear regressions enabled us to build phenomenological models relating PI to water and salt content, and to temperature. These models could then be integrated into a 3D numerical ham model, coupling salt and water transfers to proteolysis.
Asunto(s)
Músculos/química , Animales , Manipulación de Alimentos/métodos , Carne/análisis , Proteolisis , Cloruro de Sodio , Porcinos , Temperatura , Agua/análisisRESUMEN
A method was adapted to determine proteolytic activity in dry-cured ham using fluorescamine-specific labelling of N-terminal α-amino groups of peptides and amino acids. Fluorescence of the complex was measured using a microplate procedure and optimum excitation and emission wavelengths of 375nm and 475nm, respectively. A new proteolysis index (PI) was defined as the percentage ratio of the N-terminal α-amino group content to the total protein content of the ham extract. The robustness of the method was evaluated by measuring PI in pork meat samples subjected to standardized processing conditions and in samples extracted from industrial hams taken at different stages of processing. For the industrial samples, a comparison with the classic nitrogen procedure of PI determination was performed and a formula relating the two PIs was established. The rapidity, sensitivity and specificity of the procedure make it a good candidate for a screening test to evaluate ham quality in industry.