Imaging the atomic structure and local chemistry of platelets in natural type Ia diamond.

In the past decades, many efforts have been devoted to characterizing {001} platelet defects in type Ia diamond. It is known that N is concentrated at the defect core. However, an accurate description of the atomic structure of the defect and the role that N plays in it is still unknown. Here, by using aberration-corrected transmission electron microscopy and electron energy-loss spectroscopy we have determined the atomic arrangement within platelet defects in a natural type Ia diamond and matched it to a prevalent theoretical model. The platelet has an anisotropic atomic structure with a zigzag ordering of defect pairs along the defect line. The electron energy-loss near-edge fine structure of both carbon K- and nitrogen K-edges obtained from the platelet core is consistent with a trigonal bonding arrangement at interstitial sites. The experimental observations support an interstitial aggregate mode of formation for platelet defects in natural diamond.

Monochromatic 2D Kα Emission Images Revealing Short-Pulse Laser Isochoric Heating Mechanism.

The rapid heating of a thin titanium foil by a high intensity, subpicosecond laser is studied by using a 2D narrow-band x-ray imaging and x-ray spectroscopy. A novel monochromatic imaging diagnostic tuned to 4.51 keV Ti Kα was used to successfully visualize a significantly ionized area (⟨Z⟩>17±1) of the solid density plasma to be within a ∼35 µm diameter spot in the transverse direction and 2 µm in depth. The measurements and a 2D collisional particle-in-cell simulation reveal that, in the fast isochoric heating of solid foil by an intense laser light, such a high ionization state in solid titanium is achieved by thermal diffusion from the hot preplasma in a few picoseconds after the pulse ends. The shift of Kα and formation of a missing Kα cannot be explained with the present atomic physics model. The measured Kα image is reproduced only when a phenomenological model for the Kα shift with a threshold ionization of ⟨Z⟩=17 is included. This work reveals how the ionization state and electron temperature of the isochorically heated nonequilibrium plasma are independently increased.

An optical configuration for fastidious STEM detector calibration and the effect of the objective-lens pre-field.

In the scanning transmission electron microscope, an accurate knowledge of detector collection angles is paramount in order to quantify signals on an absolute scale. Here we present an optical configuration designed for the accurate measurement of collection angles for both image-detectors and energy-loss spectrometers. By deflecting a parallel electron beam, carefully calibrated using a diffraction pattern from a known material, we can directly observe the projection-distortion in the post-specimen lenses of probe-corrected instruments, the 3-fold caustic when an image-corrector is fitted, and any misalignment of imaging detectors or spectrometer apertures. We also discuss for the first time, the effect that higher-order aberrations in the objective-lens pre-field has on such an angle-based detector mapping procedure.

Collimated Propagation of Fast Electron Beams Accelerated by High-Contrast Laser Pulses in Highly Resistive Shocked Carbon.

Collimated transport of ultrahigh intensity electron current was observed in cold and in laser-shocked vitreous carbon, in agreement with simulation predictions. The fast electron beams were created by coupling high-intensity and high-contrast laser pulses onto copper-coated cones drilled into the carbon samples. The guiding mechanism-observed only for times before the shock breakout at the inner cone tip-is due to self-generated resistive magnetic fields of ∼0.5-1 kT arising from the intense currents of fast electrons in vitreous carbon, by virtue of its specific high resistivity over the range of explored background temperatures. The spatial distribution of the electron beams, injected through the samples at different stages of compression, was characterized by side-on imaging of hard x-ray fluorescence.

Atomic-Resolution STEM Imaging of Graphene at Low Voltage of 30 kV with Resolution Enhancement by Using Large Convergence Angle.

Atomic resolution at a low accelerating voltage with aberration correction is required to reduce the electron irradiation damage in scanning transmission electron microscopy imaging. However, the reduction in resolution caused by the diffraction limit becomes severe with increasing electron wavelength at low accelerating voltages. The developed aberration corrector can compensate for higher-order aberration in scanning transmission electron microscopy to expand the uniform phase angle. The resolution for imaging graphene at 30 kV is evaluated by changing the convergence angle for a probe-forming system with a higher-order aberration corrector. A single-carbon atom on graphene is successfully imaged at atomic resolution with a cold-field emission gun by dark-field imaging at an accelerating voltage of 30 kV.

Enhanced relativistic-electron-beam energy loss in warm dense aluminum.

Energy loss in the transport of a beam of relativistic electrons in warm dense aluminum is measured in the regime of ultrahigh electron beam current density over 2×10^{11} A/cm^{2} (time averaged). The samples are heated by shock compression. Comparing to undriven cold solid targets, the roles of the different initial resistivity and of the transient resistivity (upon target heating during electron transport) are directly observable in the experimental data, and are reproduced by a comprehensive set of simulations describing the hydrodynamics of the shock compression and electron beam generation and transport. We measured a 19% increase in electron resistive energy loss in warm dense compared to cold solid samples of identical areal mass.

Effect of target material on fast-electron transport and resistive collimation.

The effect of target material on fast-electron transport is investigated using a high-intensity (0.7 ps, 10(20) W/cm2) laser pulse irradiated on multilayered solid Al targets with embedded transport (Au, Mo, Al) and tracer (Cu) layers, backed with millimeter-thick carbon foils to minimize refluxing. We consistently observed a more collimated electron beam (36% average reduction in fast-electron induced Cu Kα spot size) using a high- or mid-Z (Au or Mo) layer compared to Al. All targets showed a similar electron flux level in the central spot of the beam. Two-dimensional collisional particle-in-cell simulations showed formation of strong self-generated resistive magnetic fields in targets with a high-Z transport layer that suppressed the fast-electron beam divergence; the consequent magnetic channels guided the fast electrons to a smaller spot, in good agreement with experiments. These findings indicate that fast-electron transport can be controlled by self-generated resistive magnetic fields and may have important implications to fast ignition.

Face, content and concurrent validity of the Mimic® dV-Trainer for robot-assisted endoscopic surgery: a prospective study.

OBJECTIVE: The aim of this study was to determine whether any correlation exists between the performance of the Mimic® dV-Trainer (Mimic Technologies, Seattle, Wash., USA) and the da Vinci Surgical System (Intuitive Surgical, Sunnyvale, Calif., USA). METHODS: Twelve participants were recruited, ranging from residents to consultants. We used four training tasks, consisting of 'Pick and Place', 'Peg Board', 'Thread the Rings' and 'Suture Sponge', from the software program of the Mimic dV-Trainer. The performance of the participants was recorded and measured. Additionally, we prepared the same tasks for the da Vinci Surgical System. All participants completed the tasks using the da Vinci Surgical System and were assessed according to time, the Objective Structured Assessment of Technical Skill checklist and the global rating score for endoscopic suturing assessed by two independent blinded observers. After performing these tasks, the participants completed a questionnaire that evaluated the Mimic dV-Trainer's face and content validity. The final results for each participant for the Mimic dV-Trainer and the da Vinci Surgical System were compared. RESULTS: All participants ranked the Mimic dV-Trainer as a realistic training platform that is useful for residency training. There was a significant relationship between the Mimic dV-Trainer and the da Vinci Surgical System in all four tasks. We verified the reliability of the assessment of the checklist and the global rating scores for endoscopic suturing assessed by the two blinded observers using Cronbach's alpha test (r = 0.803, 0.891). CONCLUSIONS: We evaluated the concurrent validity of the Mimic dV-Trainer and the da Vinci Surgical System. Our results suggest the possibility that training using the Mimic dV-Trainer may therefore be able to improve the operator's performance during live robot-assisted surgery.

Ultrafast time-resolved 2D imaging of laser-driven fast electron transport in solid density matter using an x-ray free electron laser.

High-power, short-pulse laser-driven fast electrons can rapidly heat and ionize a high-density target before it hydrodynamically expands. The transport of such electrons within a solid target has been studied using two-dimensional (2D) imaging of electron-induced Kα radiation. However, it is currently limited to no or picosecond scale temporal resolutions. Here, we demonstrate femtosecond time-resolved 2D imaging of fast electron transport in a solid copper foil using the SACLA x-ray free electron laser (XFEL). An unfocused collimated x-ray beam produced transmission images with sub-micron and ∼10 fs resolutions. The XFEL beam, tuned to its photon energy slightly above the Cu K-edge, enabled 2D imaging of transmission changes induced by electron isochoric heating. Time-resolved measurements obtained by varying the time delay between the x-ray probe and the optical laser show that the signature of the electron-heated region expands at ∼25% of the speed of light in a picosecond duration. Time-integrated Cu Kα images support the electron energy and propagation distance observed with the transmission imaging. The x-ray near-edge transmission imaging with a tunable XFEL beam could be broadly applicable for imaging isochorically heated targets by laser-driven relativistic electrons, energetic protons, or an intense x-ray beam.

Hot electron temperature and coupling efficiency scaling with prepulse for cone-guided fast ignition.

The effect of increasing prepulse energy levels on the energy spectrum and coupling into forward-going electrons is evaluated in a cone-guided fast-ignition relevant geometry using cone-wire targets irradiated with a high intensity (10(20) W/cm(2)) laser pulse. Hot electron temperature and flux are inferred from Kα images and yields using hybrid particle-in-cell simulations. A two-temperature distribution of hot electrons was required to fit the full profile, with the ratio of energy in a higher energy (MeV) component increasing with a larger prepulse. As prepulse energies were increased from 8 mJ to 1 J, overall coupling from laser to all hot electrons entering the wire was found to fall from 8.4% to 2.5% while coupling into only the 1-3 MeV electrons dropped from 0.57% to 0.03%.

Dynamics of relativistic laser-plasma interaction on solid targets.

A novel time-resolved diagnostic is used to record the critical surface motion during picosecond-scale relativistic laser interaction with a solid target. Single-shot measurements of the specular light show a redshift decreasing with time during the interaction, corresponding to a slowing-down of the hole boring process into overdense plasma. On-shot full characterization of the laser pulse enables simulations of the experiment without any free parameters. Two-dimensional particle-in-cell simulations yield redshifts that agree with the data, and support a simple explanation of the slowing-down of the critical surface based on momentum conservation between ions and reflected laser light.

Pebbles and sand on asteroid (162173) Ryugu: In situ observation and particles returned to Earth.

The Hayabusa2 spacecraft investigated the C-type (carbonaceous) asteroid (162173) Ryugu. The mission performed two landing operations to collect samples of surface and subsurface material, the latter exposed by an artificial impact. We present images of the second touchdown site, finding that ejecta from the impact crater was present at the sample location. Surface pebbles at both landing sites show morphological variations ranging from rugged to smooth, similar to Ryugu's boulders, and shapes from quasi-spherical to flattened. The samples were returned to Earth on 6 December 2020. We describe the morphology of >5 grams of returned pebbles and sand. Their diverse color, shape, and structure are consistent with the observed materials of Ryugu; we conclude that they are a representative sample of the asteroid.

Electron microscopy at a sub-50 pm resolution.

An aberration-corrected electron microscope developed in CREST project has been applied for imaging atoms and clusters buried inside crystals. The resolution of the microscope in scanning transmission electron microscopy (STEM) has experimentally proved to be better than 47 pm by use of a cold-field emission gun at 300 kV. The high resolution has given an advantage for imaging light elements such as lithium atoms discriminating one by one. Moreover, a three-dimensional structure imaging has been demonstrated for dopant clusters by a sub-50 pm STEM, using its high depth resolution.

Classification of lymphoscintigraphy and relevance to surgical indication for lymphaticovenous anastomosis in upper limb lymphedema.

Upper limb lymphedema that develops after breast cancer surgery causes physical discomfort and psychological distress, and it can require both conservative and surgical treatment. Lymphaticovenous anastomosis has been reported to be an effective treatment; however the disease severity criteria that define indications for this treatment remain unclear. Here, we examined lymphoscintigraphic findings in 78 patients with secondary upper limb lymphedema and classified them into 5 major types (Type I-V) and 3 subtypes (Subtype E, L, and 0). Results revealed that this classification is related to the clinical stage scale of the International Society of Lymphology. Based on intraoperative examination findings in 20 of the 78 patients, lymphatic pressure is likely to be further elevated in Type II-V cases which are characterized by the presence of dermal back flow. Therefore, lymphaticovenous anastomosis should be considered as a treatment option for lymphedema in Type II-V cases. Furthermore, there are only limited lymph vessel sites usable for lymphaticovenous anastomosis in more severe lymphedema types [Types IV and Type V (which is characterized by dermal backflow only in the hand)]. The findings in Type IV-V cases suggest that therapeutic strategies for severe upper limb lymphedema need further consideration.

Unveiling axial involvement in psoriatic arthritis: An ancillary analysis of the ASAS-perSpA study.

OBJECTIVE: To determine the clinical profile of axial psoriatic arthritis (PsA) in a worldwide setting. Secondly, to identify factors associated with the development of axial involvement in patients with PsA. METHODS: Data from 3684 patients with axial spondyloarthritis (axSpA) or PsA from the ASAS-perSpA study were analysed. The ASAS-perSpA is a cross-sectional study that recruited consecutive patients with SpA (as diagnosed by their rheumatologist) from 68 centers worldwide and collected patient and disease data. First, 2651 axSpA patients and 367 PsA patients with any history of axial involvement (axPsA) were compared using logistic regression to later identify predictive factors for rheumatologist diagnosis of axPsA. Secondly, 367 axPsA patients were compared with 666 PsA patients lacking axial involvement (peripheral PsA [pPsA]) and the characteristics associated with axial manifestations were explored by logistic regression analysis. RESULTS: Patients with axPsA were older and less frequently males or HLA*B27 positive in comparison with axSpA patients. Additionally, while patients with axPsA had more peripheral manifestations and psoriasis, other extra-musculoskeletal manifestations (IBD and uveitis) were more frequent in those with axSpA. In the multivariable analysis, older age at diagnosis (OR = 1.04), peripheral arthritis (OR = 7.32) and dactylitis (OR = 2.82) were significantly associated with the diagnosis of axPsA. However, uveitis (OR = 0.22), IBD (OR = 0.12), HLA*B27 carriership (OR = 0.26) or sacroiliitis on imaging (OR = 0.5) were inversely associated with axPsA diagnosis as compared to axSpA. Axial involvement in patients with PsA was significantly associated with male gender (OR = 1.68), elevated CRP (OR = 2.87) and the absence of psoriasis (OR = 0.33). CONCLUSION: In this worldwide setting axPsA was defined by rheumatologists as a unique phenotype, with disease features lying between axSpA and pure pPsA.

2D monochromatic x-ray imaging for beam monitoring of an x-ray free electron laser and a high-power femtosecond laser.

In pump-probe experiments with an X-ray Free Electron Laser (XFEL) and a high-power optical laser, spatial overlap of the two beams must be ensured to probe a pumped area with the x-ray beam. A beam monitoring diagnostic is particularly important in short-pulse laser experiments where a tightly focused beam is required to achieve a relativistic laser intensity for generation of energetic particles. Here, we report the demonstration of on-shot beam pointing measurements of an XFEL and a terawatt class femtosecond laser using 2D monochromatic Kα imaging at the Matter in Extreme Conditions end-station of the Linac Coherent Light Source. A thin solid titanium foil was irradiated by a 25-TW laser for fast electron isochoric heating, while a 7.0 keV XFEL beam was used to probe the laser-heated region. Using a spherical crystal imager (SCI), the beam overlap was examined by measuring 4.51 keV Kα x rays produced by laser-accelerated fast electrons and the x-ray beam. Measurements were made for XFEL-only at various focus lens positions, laser-only, and two-beam shots. Successful beam overlapping was observed on ∼58% of all two-beam shots for 10 µm thick samples. It is found that large spatial offsets of laser-induced Kα spots are attributed to imprecise target positioning rather than shot-to-shot laser pointing variations. By applying the Kα measurements to x-ray Thomson scattering measurements, we found an optimum x-ray beam spot size that maximizes scattering signals. Monochromatic x-ray imaging with the SCI could be used as an on-shot beam pointing monitor for XFEL-laser or multiple short-pulse laser experiments.

Sample collection from asteroid (162173) Ryugu by Hayabusa2: Implications for surface evolution.

The near-Earth asteroid (162173) Ryugu is thought to be a primitive carbonaceous object that contains hydrated minerals and organic molecules. We report sample collection from Ryugu's surface by the Hayabusa2 spacecraft on 21 February 2019. Touchdown images and global observations of surface colors are used to investigate the stratigraphy of the surface around the sample location and across Ryugu. Latitudinal color variations suggest the reddening of exposed surface material by solar heating and/or space weathering. Immediately after touchdown, Hayabusa2's thrusters disturbed dark, fine grains that originate from the redder materials. The stratigraphic relationship between identified craters and the redder material indicates that surface reddening occurred over a short period of time. We suggest that Ryugu previously experienced an orbital excursion near the Sun.

An artificial impact on the asteroid (162173) Ryugu formed a crater in the gravity-dominated regime.

The Hayabusa2 spacecraft investigated the small asteroid Ryugu, which has a rubble-pile structure. We describe an impact experiment on Ryugu using Hayabusa2's Small Carry-on Impactor. The impact produced an artificial crater with a diameter >10 meters, which has a semicircular shape, an elevated rim, and a central pit. Images of the impact and resulting ejecta were recorded by the Deployable CAMera 3 for >8 minutes, showing the growth of an ejecta curtain (the outer edge of the ejecta) and deposition of ejecta onto the surface. The ejecta curtain was asymmetric and heterogeneous and it never fully detached from the surface. The crater formed in the gravity-dominated regime; in other words, crater growth was limited by gravity not surface strength. We discuss implications for Ryugu's surface age.

Tie2-mediated loss of peroxisome proliferator-activated receptor-gamma in mice causes PDGF receptor-beta-dependent pulmonary arterial muscularization.

Peroxisome proliferator-activated receptor (PPAR)-gamma is reduced in pulmonary arteries (PAs) of patients with PA hypertension (PAH), and we reported that deletion of PPARgamma in smooth muscle cells (SMCs) of transgenic mice results in PAH. However, the sequelae of loss of PPARgamma in PA endothelial cells (ECs) are unknown. Therefore, we bred Tie2-Cre mice with PPARgamma(flox/flox) mice to induce EC loss of PPARgamma (Tie2 PPARgamma(-/-)), and we assessed PAH by right ventricular systolic pressure (RVSP), RV hypertrophy (RVH), and muscularized distal PAs in room air (RA), after chronic hypoxia (CH), and after 4 wk of recovery in RA (Rec-RA). The Tie2 PPARgamma(-/-) mice developed spontaneous PAH in RA with increased RVSP, RVH, and muscularized PAs vs. wild type (WT); both genotypes exhibited a similar degree of PAH following chronic hypoxia, but Tie2 PPARgamma(-/-) mice had more residual PAH compared with WT mice after Rec-RA. The Tie2 PPARgamma(-/-) vs. WT mice in RA had increased platelet-derived growth factor receptor-beta (PDGF-Rbeta) expression and signaling, despite an elevation in the PPARgamma target apolipoprotein E, an inhibitor of PDGF signaling. Inhibition of PDGF-Rbeta signaling with imatinib, however, was sufficient to reverse the PAH observed in the Tie2 PPARgamma(-/-) mice. Thus the disruption of PPARgamma signaling in EC is sufficient to cause mild PAH and to impair recovery from CH-induced PAH. Inhibition of heightened PDGF-Rbeta signaling is sufficient to reverse PAH in this genetic model.

Characterization of the collagen in the hexagonal lattice of Descemet's membrane: its relation to type VIII collagen.

To investigate the nature of the hexagonal lattice structure in Descemet's membrane, monoclonal antibodies were raised against a homogenate of bovine Descemet's membranes. They were screened by immunofluorescence microscopy to obtain antibodies that label Descement's membrane. Some monoclonal antibodies labeled both Descemet's membrane and fine filaments within the stroma. In electron microscopy, with immunogold labeling on a critical point dried specimen, the antibodies labeled the hexagonal lattices and long-spacing structures produced by the bovine corneal endothelial cells in culture; 6A2 antibodies labeled the nodes of the lattice and 9H3 antibodies labeled the sides of the lattice. These antibodies also labeled the hexagonal lattice of Descemet's membrane in situ in ultrathin frozen sectioning. In immunofluorescence, these antibodies stained the sclera, choroid, and optic nerve sheath and its septum. They also labeled the dura mater of the spinal cord, and the perichondrium of the tracheal cartilage. In immunoblotting, the antibodies recognized 64-kD collagenous peptides both in tissue culture and in Descemet's membrane in vivo. They also recognized 50-kD pepsin-resistant fragments from Descemet's membranes that are related to type VIII collagen. However, they did not react either in immunoblotting or in immunoprecipitation with medium of subconfluent cultures from which type VIII collagen had been obtained. The results are discussed with reference to the nature of type VIII collagen, which is currently under dispute. This lattice collagen may be a member of a novel class of long-spacing fibrils.