Rhodamine 6G-based efficient chemosensor for trivalent metal ions (Al3+, Cr3+ and Fe3+) upon single excitation with applications in combinational logic circuits and memory devices.

A new rhodamine 6G-based chemosensor (L3) was synthesized and characterized by 1H, 13C, IR and mass spectroscopy studies. It exhibited an excellent selective and sensitive CHEF-based recognition of trivalent metal ions M3+ (M = Fe, Al and Cr) over mono and di-valent and other trivalent metal ions with prominent enhancement in the absorption and fluorescence intensity for Fe3+ (669-fold), Al3+ (653-fold) and Cr3+ (667-fold) upon the addition of 2.6 equivalent of these metal ions in the probe in H2O/CH3CN (7 : 3, v/v, pH 7.2). The corresponding Kd values were evaluated to be 1.94 × 10-5 (Fe3+), 3.15 × 10-5 (Al3+) and 2.26 × 10-5 M (Cr3+). The quantum yields of L3, [L3-Fe3+], [L3-Al3+] and [L3-Cr3+] complexes in H2O/CH3CN (7 : 3, v/v, pH 7.2) were found to be 0.0005, 0.335, 0.327 and 0.333, respectively, using rhodamine-6G as the standard. The LODs for Fe3+, Al3+ and Cr3+ were determined by 3σ methods and found to be 2.57, 0.78 and 0.47 µM, respectively. The cyanide ion snatched Fe3+ from the [Fe3+-L3] complex and quenched its fluorescence via its ring-closed spirolactam form. Advanced level molecular logic devices using different inputs (2 and 4 input) and a memory device were constructed.

Exchange-Bias Quantum Tunneling of the Magnetization in a Dysprosium Dimer.

Single-molecule magnets (SMMs) have been shown to possess bewildering phenomena leading to their proposal in several futuristic applications ranging from data storage devices to the basic unit of quantum computers. The main characteristic for the proposal of SMMs in such schemes is their inherent and intriguing quantum mechanical properties, which in turn, could be exploited in novel devices with larger capacities, such as for data storage or enhanced properties, such as quantum computers. In the quest of SMMs displaying such intriguing quantum effects, herein, we explore the synthesis, structural, and magnetic characterization of a dimeric dysprosium-based SMM composed of a tetradentate Schiff-base ligand with formula [Dy2(HL)2(benz)2(NO3)2]. Magnetic studies show that the complex is an SMM, while sub-Kelvin µ-SQUID studies revealed the exchange-bias characteristics of the system attributed to the presence of exchange interaction between the Dy3+ pair.

A coumarin embedded highly sensitive nitric oxide fluorescent sensor: kinetic assay and bio-imaging applications.

Fluorescence spectroscopy is a significant bio-analytical technique for specific detection of nitric oxide (NO) and for broadcasting the in vitro and in vivo biological activities of this gasotransmitter. Herein, a benzo-coumarin embedded smart molecular probe (BCM) is employed for NO sensing through detailed fluorescence studies in purely aqueous medium. All the spectroscopic analysis and literature reports clearly validate the mechanistic insight of this sensing strategy i.e., the initial formation of 1,2,3,4-oxatriazole on treatment of the probe with NO which finally converted to its carboxylic acid derivative. This oxatriazole formation results in a drastic enhancement in fluoroscence intensity due to the photoinduced electron transfer (PET) effect. The kinetic investigation unveils the second and first-order dependency on [NO] and [BCM] respectively. The very low detection limit (16 nM), high fluorescence enhancement (123 fold) in aqueous medium and good formation constant (Kf = (4.33 ± 0.48) × 104 M-1) along with pH invariability, non-cytotoxicity, biocompatibility and cell permeability make this probe a very effective one for tracking NO intracellularly.

A differentially selective probe for trivalent chemosensor upon single excitation with cell imaging application: potential applications in combinatorial logic circuit and memory devices.

A new rhodamine 6G-benzylamine-based sensor (L1), having only hydrocarbon skeletons in the extended part, was synthesized and characterized by single-crystal X-ray crystallographic study. It exhibited excellent selective and sensitive recognition of trivalent metal ions M3+ (M = Fe, Al and Cr) over mono- and di-valent and other trivalent metal ions. A large enhancement of the fluorescence intensity for Fe3+ (41-fold), Al3+ (31-fold) and Cr3+ (26-fold) was observed upon the addition of 3.0 equivalent of these metal ions into the probe in H2O/CH3CN (4 : 1, v/v, pH 7.2) with naked eye detection. The corresponding Kf values were evaluated to be 9.4 × 103 M-1 (Fe3+), 1.34 × 104 M-1 (Al3+) and 8.7 × 103 M-1 (Cr3+). Quantum yields of the L1, [L1-Fe3+], [L1-Al3+] and [L1-Cr3+] complexes in H2O/CH3CN (4 : 1, v/v, pH 7.2) were found to be 0.012, 0.489, 0.376 and 0.310, respectively, using rhodamine-6G as standard. LODs for Fe3+, Al3+ and Cr3+ were determined by 3σ methods and found to be 1.28, 1.34 and 2.28 µM, respectively. Cyanide ion scavenged Fe3+ from the [Fe3+-L1] complex and quenched its fluorescence via its ring-closed spirolactam form. Advanced level molecular logic devices using different inputs (2 and 4 inputs) as advanced level logic gates and memory devices were constructed. The large enhancement in fluorescence emission of L1 upon complexation with M3+ metal ions makes the probe suitable for the bio-imaging of M3+ (M = Fe, Al and Cr) in living cells.

A smart molecular probe for selective recognition of nitric oxide in 100% aqueous solution with cell imaging application and DFT studies.

Herein, a simple, least-cytotoxic as well as an efficient fluorescent sensor HqEN480 was prepared from (quinolin-8-yloxy)-acetic acid ethyl ester (L1) and N,N-dimethylethylene diamine to recognize NO in 100% aqueous solution. Its marked selectivity and sensitivity towards NO, makes it a highly suitable probe for nitric oxide under in vitro conditions with the possibility of in vivo monitoring of NO. Upon addition of 3.5 equivalents of NO, there is an approximately 7 fold enhancement in fluorescence intensity in aqueous solution with a corresponding Kf value of (1.75 ± 0.07) × 104 M-1. Quantum yields of HqEN480 and [HqEN480-NO] compounds are determined to be 0.04 and 0.22, respectively, using acidic quinine sulphate as a standard. In terms of the 3σ method, the LOD for nitric oxide was found to be 53 nM thus, making the probe suitable for tracking NO in biological systems.

Correction: A smart molecular probe for selective recognition of nitric oxide in 100% aqueous solution with cell imaging application and DFT studies.

Correction for 'A smart molecular probe for selective recognition of nitric oxide in 100% aqueous solution with cell imaging application and DFT studies' by Ananya Dutta et al., Org. Biomol. Chem., 2019, DOI: 10.1039/c9ob00177h.

Nitric Oxide Sensing through 1,2,3,4-Oxatriazole Formation from Acylhydrazide: A Kinetic Study.

A simple molecular probe displays highly selective turn-on response toward NO by the unprecedented NO-induced formation of a 1,2,3,4-oxatriazole ring exhibiting no interference from various endogenous biomolecules including DHA, AA, etc. Kinetics of the reactions between NO and the probe provide a mechanistic insight into the formation of 1,2,3,4-oxatriazole which showed that, though initially 1,2,3,4-oxatriazole is formed and extractable in solid form, it exists in equilibrium with the ring opened azide form which ultimately hydrolyzed and converted to carboxylic acid and nitrate. The reaction displays second-order dependence on [NO] and first-order on [Probe]. The probe is water-soluble, cell permeable, and noncytotoxic and appropriates for live cell imaging. This constitutes the first report where there is a direct evidence of NO-induced ring closing reaction of an acyl hydrazide moiety leading to the formation of 1,2,3,4-oxatriazole.

Selective sensing of nitric oxide by a 9,10-phenanthroquinone-pyridoxal based fluorophore.

In this article, we have designed and synthesized a new, convenient and efficient phenanthroquinone-pyridoxal based fluorogenic probe PQPY, highly suitable for the selective and sensitive detection of nitric oxide in an aerated aqueous (7 : 3/H2O : MeCN) medium at pH 7.0 (10 mM HEPES buffer). Upon addition of nitric oxide, this probe exhibits emission in the green region (λem = 505 nm) which is ascribed to ICT (intramolecular charge transfer) from the phenanthroquinone moiety to the imidazole -N-N[double bond, length as m-dash]O fragment. The apparent formation constant, Kf, of the NO product of the ligand is (1.00 ± 0.2) × 105 M-1 and the LOD is 78 nM. The substantial enhancement of the life-time of the ligand (τ0 = 2.68 ns) occurs due to binding with nitric oxide (τ0 = 3.96 ns). This probe is low cytotoxicity, cell permeable and suitable for living cell imaging application.

A hydrazone based probe for selective sensing of Al(iii) and Al(iii)-probe complex mediated secondary sensing of PPi: framing of molecular logic circuit and memory device and computational studies.

A hydrazone-based conjugate Nap-hyz-pyz (H3L3) with potential N2O2 donor atoms was found to act as a dual channel (colori- and fluori-metric) sensor towards Al3+ and PPi in H2O-MeOH (6 : 4, v/v) at pH 7.2 (40 mM HEPES buffer) at 25 °C. The formation constants, Kf = (3.49 ± 1.77) × 104 and (3.78 ± 0.1) × 104 M-1, of the sensor towards Al3+ were determined by absorption and fluorescence titrations, respectively. The 1 : 1 stoichiometry of the reaction was determined by Job's method and confirmed by ESI-MS+ (m/z) studies. The LOD for Al3+, as determined by the 3σ method, was found to be 114.54 nM. Most strikingly, the addition of ∼115 µM PPi to the Nap-hyz-pyz-Al3+ ensemble (20 µM ligand and 74 µM Al3+) leads to complete quenching of fluorescence. The fluorescence response of Nap-hyz-pyz towards Al3+ was not perturbed by the presence of 5 equivalents or more of other ions and inorganic anions. The structure of the [Al(L3)(H2O)] complex was delineated by DFT calculations. TD-DFT studies were performed to investigate various spectral transitions. Based on changes in the fluorescence intensities of Nap-hyz-pyz in the presence of Al3+ and PPi at 487 nm, INHIBIT and molecular logic gates were constructed and interpreted. The probe was found to be bio-compatible and cell permeable with no or negligible cytotoxicity; thus, it provides a good opportunity for in vitro cell imaging studies of these ions. The presence of ATP or Pi did not interfere with the fluorescent detection of PPi. Thus, these evident and excellent sensing capabilities of Nap-hyz-pyz towards Al3+ and PPi were further scrutinized in HepG2 cell lines.

A turn-on fluorogenic chemosensor for Fe3+ and a Schottky barrier diode with frequency-switching device applications.

A novel highly sensitive and selective fluorescent chemosensor L has been synthesized and characterized by various physicochemical techniques. In 3 : 7 water : MeCN (v/v) at pH 7.2 (10 mM HEPES buffer, µ = 0.05 M LiCl), it selectively recognizes Fe3+ through 1 : 1 complexation resulting in a 106-fold fluorescence enhancement and a binding constant of 8.10 × 104 M-1. The otherwise non-fluorescent spirolactam form of the probe results a dual-channel (absorbance and fluorescence) recognition of Fe3+via CHEF (chelation enhanced fluorescence) through the opening of the spirolactam ring. We have also carried out fluorescence titration and anisotropy (r) studies in pure water in the presence of SDS (sodium dodecyl sulphate). Based on the dependence of FI (fluorescence intensity) and r on [SDS] it was proposed that the probe is trapped between two SDS monolayers which again interact among themselves by ππ stacking. As a result, there is an increase in FI up to [SDS] ∼ 7 mM - a phenomenon reminiscent of aggregation-induced enhancement of emission (AIEE). Beyond this concentration of SDS (7 mM), micelle formation takes place and the ππ stacked polymer now becomes a monomer and is trapped inside the micellar cavity. As a result, there is a decrease in FI at [SDS] > 7 mM. But for anisotropy, it increases with [SDS] beyond 7 mM. Ligand, metal, and SDS interactions are well established through different optical and morphological studies. [L-Fe(NO3)]2+ thin films on FTO (Fluorine-doped Tin Oxide) glass substrates have been designed with the help of the spin-coating deposition technique. The deposited film of thickness 1.6 × 10-5 cm is well characterized by optical band gap calculation with a direct band gap, εg ∼ 1.6 eV. FESEM was also performed for the [L-Fe(NO3)]2+/FTO film. The current-voltage characteristics were measured by the two-probe technique. Light-dependent exciton generation was carried out by taking the top and bottom contacts with graphite paste on FTO and on the [L-Fe(NO3)]2+ films for the measurement of switching behavior. The response ratio curve for the light-induced frequency-switching phenomena has been obtained. The frequency taped here is the oscillation frequency of the photo-generated electron and the hole in an exiton. Thus, the light-induced frequency-switching behavior and Schottky barrier diode characteristics of the material were established.

A rhodamine-based turn-on nitric oxide sensor in aqueous medium with endogenous cell imaging: an unusual formation of nitrosohydroxylamine.

A new sensor (L3) based on Rhodamine-B-en (2) and 2-(pyridin-2-ylmethoxy)benzaldehyde (1) has been developed for highly sensitive and selective recognition of NO in purely aqueous medium where the reaction of NO with the fluorophore leads to an unusual formation of nitrosohydroxylamine with the selective opening of the spirolactam ring over different cations, anions, amino-acids and other biological species with prominent enhancement in absorption and emission intensities. A large enhancement of fluorescence intensity for NO (11 fold) was observed upon addition of 3 equivalents of NO into the sensor in aqueous HEPES buffer (20 mM) at pH 7.20, µ = 0.05 M NaCl with naked eye detection. The corresponding Kf value was evaluated to be (7.55 ± 2.04) × 104 M-1 from the fluorescence titration plot. Quantum yields of L3 and the [L3 + NO] compound are found to be 0.07 and 0.77, respectively, using Rhodamine-6G as the standard. The LOD for NO was determined by the 3σ method and found to be 83.4 nM. The L3 sensor has low cytotoxicity, and is cell permeable and suitable for in vitro NO sensing. The in vivo compatibility of the sensor was also checked on zebrafish.

A Smart Molecule for Selective Sensing of Nitric Oxide: Conversion of NO to HSNO; Relevance of Biological HSNO Formation.

A smart molecule, QT490, containing thiosemicarbazide moiety acts as a highly selective turn-on in vitro NO sensor through the unprecedented NO-induced transformation of thiosemicarbazide moiety to 1,3,4-oxadiazole heterocycle with the concomitant release of HSNO, thereby eliminating any interference from various endogenous biomolecules including dehydroascorbic acid, ascorbic acid, etc. The kinetic studies of the reactions between QT490 and NO provide a mechanistic insight into formation of HSNO/RSNO from the reaction between H2S/RSH and NO in the biological system. This novel probe is non-cytotoxic, cell permeable, water-soluble, and appropriate for intracellular cytoplasmic NO sensing with the possibilities of in vivo applications.

Surfactant modulated aggregation induced enhancement of emission (AIEE)--a simple demonstration to maximize sensor activity.

A new type of easily synthesized rhodamine-based chemosensor L(3), with potential NO2 donor atoms, selectively and rapidly recognizes Hg(2+) ions in the presence of all biologically relevant metal ions and toxic heavy metals. A very low detection limit (78 nM) along with cytoplasmic cell imaging applications with no or negligible cytotoxicity indicate good potential for in vitro/in vivo cell imaging studies. SEM and TEM studies reveal strongly agglomerated aggregations in the presence of 5 mM SDS which turn into isolated core shell microstructures in the presence of 9 mM SDS. The presence of SDS causes an enhanced quantum yield (φ) and stability constant (Kf) compared to those in the absence of SDS. Again, the FI of the [L(3)-Hg](2+) complex in an aqueous SDS (9 mM) medium is unprecedentedly enhanced (∼143 fold) compared to that in the absence of SDS. All of these observations clearly manifest in the enhanced rigidity of the [L(3)-Hg](2+) species in the micro-heterogeneous environment significantly restricting its dynamic movements. This phenomenon may be ascribed as an aggregation induced emission enhancement (AIEE). The fluorescence anisotropy assumes a maximum at 5 mM SDS due to strong trapping (sandwiching) of the doubly positively charged [L(3)-Hg](2+) complex between two co-facial laminar microstructures of SDS under pre-miceller conditions where there is a strong electrostatic interaction that causes an improved inhibition to dynamic movement of the probe-mercury complex. On increasing the SDS concentration there is a phase transition in the SDS microstructures and micellization starts to prevail at SDS ≥ 7.0 mM. The doubly positively charged [L(3)-Hg](2+) complex is trapped inside the hydrophobic inner core of the micelle which is apparent from the failure to quench the fluorescence of the complex on adding 10 equivalents of H2EDTA(2-) solution but in the absence of SDS it is quenched effectively.

Di-oxime based selective fluorescent probe for arsenate and arsenite ions in a purely aqueous medium with living cell imaging applications and H-bonding induced microstructure formation.

A 2-hydroxy-5-methyl-benzene-1,3-dicarboxaldehyde di-oxime based turn-on blue emission fluorescent probe was found to recognize both AsO2(-) and H2AsO4(-) in a purely aqueous medium in intra and extra-cellular conditions. Self-organization of the ligand in the absence and presence of AsO2(-) and H2AsO4(-) was investigated by DLS, optical microscopy, optical fluorescence microscopy and FE-SEM methods.

Mn(II)- and Co(II)-Catalyzed Transformation of 2-Cyanopyrimidine to Methylimidate by Sodium Azide: Isolation, Structural Characterization, and Magnetic Studies on 2D Mn(II)- and Cu(II)-Complexes.

The Mn(II)-mediated transformation of 2-cyanopyrimidine to methylimidate in the presence of inorganic azide is proven through isolation and structural characterization of a metal complex. Though the reaction conditions are favorable for a "click" reaction leading to the formation of tetrazole, as evidenced from recent studies, we are astonished to see the formation of methylimidate in MeOH instead of tetrazole, which is supposed to form only in the presence of catalytic amount of corresponding alkoxide ion as base. The catalytic nature of this transformation reaction was confirmed by performing these experiments under catalytic conditions and analyzing the products using liquid chromatography-mass spectrometry techniques, which clearly showed ∼96% and ∼60% selectivity of methylimidate along with almost 100% conversion in the presence of Mn(II) and Co(II) as catalysts, respectively. In absence or presence of other metal ions like Cu(II), Ni(II), Fe(II), Zn(II), etc. only tetrazole formation takes place. So the present findings extended the formation of methylimidate catalyzed by metal ions in the presence of azide ion in alcoholic medium. Importantly, a probable mechanism for this unexpected transformation was framed based on the structural analysis and high-resolution mass spectrometry (electrospray ionization MS(+)) studies. The magnetic studies were also performed on complexes [Mn(L)(N3)2]n (1) and [Cu (L(2))2]n (2a), showing anti-ferromagnetic character for compound 1 and negligible coupling for the copper complex 2a.

A novel chromo- and fluorogenic dual sensor for Mg(2+) and Zn(2+) with cell imaging possibilities and DFT studies.

A diformyl-p-cresol (DFC)-8-aminoquinoline based dual signaling probe was found to exhibit colorimetric and fluorogenic properties on selective binding towards Mg(2+) and Zn(2+). Turn-on fluorescent enhancements (FE) as high as 40 fold and 53 fold in 9 : 1 MeCN/water (v/v) at pH 7.2 in HEPES buffer for Mg(2+) and Zn(2+), respectively, were observed. The binding constants determined from the fluorescence titration data are: K = (1.52 ± 0.21) × 10(5) M(-1) and (9.34 ± 4.0) × 10(3) M(-2) at n = 1 and 0.5, for Mg(2+) and Zn(2+), respectively. The L : M binding ratios were also determined by Job's method, which support the above findings. This is further substantiated by HRMS analysis. Due to solubility in mixed organo-aqueous solvents as well as cell permeability it could be used for the in vitro/in vivo cell imaging of Mg(2+) and Zn(2+) ions with no or negligible cytotoxicity. This probe could be made selective towards Mg(2+) over Zn(2+) in the presence of TPEN, both under intra- and extracellular conditions and is superior to other Mg(2+) probes which suffer from selectivity of Mg(2+) over Ca(2+) or Zn(2+). Furthermore the dissociation constant (Kd = 6.60 µM) of the Mg(2+)-() complex is far lower than the so far reported Mg(2+) probes which fall in the mM range.

Water-stable manganese(IV) complex of a N2O4-donor non-Schiff-base ligand: synthesis, structure, and multifrequency high-field electron paramagnetic resonance studies.

A novel water-stable (t1/2 ∼ 6.8 days) mononuclear manganese(IV) complex of a hexacoordinating non-Schiff-base ligand (H4L) with N2O4-donor atoms has been synthesized and characterized crystallographically. High-frequency electron paramagnetic resonance experiments performed on a single crystal reveal a manganese(IV) ion with an S = 3/2 ground spin state that displays a large single-ion anisotropy, setting the record of mononuclear manganese(IV) complexes reported so far. In addition, spin-echo experiments reveal a spin-spin relaxation time T2 ∼ 500 ns.

A solvent controlled regioselective synthesis of 2- and 4-substituted α-carbolines under palladium catalysis.

A facile method for the chemodivergent synthesis of α-carbolines 1via palladium catalyzed [3+3] annulations of tosyliminoindolines 6 with α, ß-unsaturated aldehydes 7 is described. Mechanistically, this cascade reaction proceeds through either a carba-Michael (in DMF) or aza-Michael (in NMA) pathway followed by intramolecular cyclization of the intermediate. A preliminary photo-physical study on selected products is also reported.

A microenvironment-sensitive red emissive probe with a large Stokes shift for specific recognition and quantification of serum albumin in complex biofluids and live cells.

Human serum albumin (HSA) is regarded as a useful biomarker for rapid medical diagnosis of various disorders mainly related to the kidneys and liver. Hence, it is crucial to identify and monitor the HSA level in complex biofluids (urine and blood samples) using a simple approach. Herein, we have designed and synthesized an intramolecular charge transfer (ICT) based environment-sensitive fluorescent molecular probe, (E)-2-(3-(2-(5-methoxy-1H-indol-3-yl)vinyl)-5,5-dimethylcyclohex-2-en-1-ylidene)malononitrile (DCI-MIN), that can selectively interact with HSA in PBS buffer solution and exhibit a ∼78-fold enhancement in fluorescence intensity with a significant Stokes shift (∼126 nm), which is important to avoid interference from the excitation light. The significant red fluorescence response can be attributed to the suppression of free intramolecular rotation of the DCI-MIN probe inside the hydrophobic binding cavity of HSA and the low polar microenvironment present within HSA. According to the 3σ/slope method, the detection limit was found to be 1.01 nM (0.0671 mg L-1) in aqueous solutions, which is significantly lower than the normal level of HSA in healthy urine and blood serum, indicating its high sensitivity. DCI-MIN has the ability to exhibit useful applications, including the detection and quantification of HSA concentration in complex biofluids (human urine and blood samples) as well as the imaging of serum albumin in living cells.

A 7-nitrobenz-2-oxa-1,3-diazole based highly sensitive and selective turn-on chemosensor for copper(II) ion with intracellular application without cytotoxicity.

A 7-nitrobenz-2-oxa-1,3-diazole (NBD) derived turn-on fluorescent probe (1) exhibits a reversible binding to Cu(2+) ion in presence of other metal ions, giving ~20 fold increase in fluorescence intensity. The apparent association constant (K(a)) for Cu(2+) was found to be 2.62 × 10(4) M(-1). The intracellular Cu(2+) imaging behaviour of chemosensor 1 on HeLa cells studied by fluorescence microscopy revealed that after incubation with 1 cells exhibited intensive fluorescence when exogenous Cu(2+) was introduced into the cell. Thus this probe features the ready availability, high sensitivity and selectivity towards Cu(2+) in MeCN-H(2)O (1:1, v/v) with cell imaging possibilities with no or negligible cytotoxicity.