RESUMO
BACKGROUND: Since social distancing during the COVID-19-pandemic had a profound impact on professional life, this study investigated the effect of PCR testing on on-site work. METHODS: PCR screening, antibody testing, and questionnaires offered to 4,890 working adults in Lower Saxony were accompanied by data collection on demographics, family status, comorbidities, social situation, health-related behavior, and the number of work-related contacts. Relative risks (RR) with 95 % confidence intervals were estimated for the associations between regular PCR testing and other work and health-related variables, respectively, and working on-site. Analyses were stratified by the suitability of work tasks for mobile office. RESULTS: Between April 2020 and February 2021, 1,643 employees underwent PCR testing. Whether mobile working was possible strongly influenced the work behavior. Persons whose work was suitable for mobile office (mobile workers) had a lower probability of working on-site than persons whose work was not suitable for mobile office (RR = 0.09 (95 % CI: 0.07 - 0.12)). In mobile workers, regular PCR-testing was slightly associated with working on-site (RR = 1.19 (0.66; 2.14)). In those whose working place was unsuitable for mobile office, the corresponding RR was 0.94 (0.80; 1.09). Compared to persons without chronic diseases, chronically ill persons worked less often on-site if their workplace was suitable for mobile office (RR = 0.73 (0.40; 1.33)), but even more often if their workplace was not suitable for mobile office (RR = 1.17 (1.04; 1.33)). CONCLUSION: If work was suitable for mobile office, regular PCR-testing did not have a strong effect on presence at the work site. TRIAL REGISTRATION: An ethics vote of the responsible medical association (Lower Saxony, Germany) retrospectively approved the evaluation of the collected subject data in a pseudonymized form in the context of medical studies (No. Bo/30/2020; Bo/31/2020; Bo/32/2020).
Assuntos
COVID-19 , Adulto , Humanos , COVID-19/epidemiologia , Pandemias , Estudos Retrospectivos , Local de Trabalho , Reação em Cadeia da Polimerase , Teste para COVID-19RESUMO
Widespread vaccination in pursuit of herd immunity has been recognized as the most promising approach to ending the global pandemic of coronavirus disease 19 (COVID-19). The vaccination of children and adolescents has been extensively debated and the first COVID-19 vaccine is now approved in European countries for children aged > 12 years of age. Our study investigates vaccination hesitancy in a cohort of German secondary school students. We assessed 903 students between age 9 and 20 in the period between 17 May 2021 and 30 June 2021. 68.3% (n = 617) reported intention to undergo COVID-19 vaccination, while 7% (n = 62) did not want to receive the vaccine and 15% (n = 135) were not yet certain. Age and parental level of education influenced COVID-19 vaccine hesitancy. Children under the age of 16 as well as students whose parents had lower education levels showed significantly higher vaccine hesitancy. Conclusion: Identifying subsets with higher vaccination hesitancy is important for targeting public information campaigns in support of immunization. What is Known: ⢠The willingness to receive COVID-19 vaccination among adults in Europe is about 70%, but data for children and adolescents is lacking. ⢠The lack of immunization in younger cohorts represents a significant barrier to achieving herd immunity, and also leaves children and adolescents vulnerable to acute and long-term morbidity from natural COVID-19 infections. What is New: ⢠Intention-to-vaccinate among children and adolescents is high (~ 70%); conversely, vaccination hesitancy is low. ⢠Age and parental level of education influenced COVID-19 vaccine hesitancy among children and adolescents.
Assuntos
Vacinas contra COVID-19 , COVID-19 , Adolescente , Adulto , COVID-19/epidemiologia , COVID-19/prevenção & controle , Criança , Estudos Transversais , Escolaridade , Humanos , Pais , SARS-CoV-2 , Estudantes , Vacinação , Hesitação Vacinal , Adulto JovemAssuntos
Vacinas contra COVID-19 , COVID-19 , COVID-19/prevenção & controle , Escolaridade , Humanos , Pais/educação , Estudantes , Vacinação , Hesitação VacinalRESUMO
Modern 3D printing is a valuable tool for tissue engineering (TE), and the fabrication of complex geometries such as tubular scaffolds with adaptable structure, for example, as replacements for intestines, bronchi, esophagus, or vessels, could contribute to standardized procedures in the future of regenerative medicine. However, high-precision bioprinting of scaffolds for tubular TE applications remain a major challenge and is an arduous endeavor with currently available three-axis bioprinters, which are limited to planar, layer-by-layer printing processes. In this work, a novel, straightforward workflow for creating toolpaths and command sets for tubular scaffolds is presented. By combining a custom software application with commercial 3D design software, a comparatively large degree of design freedom was achieved while ensuring ease of use and extensibility for future research needs. As a hardware platform, two commercial 3D bioprinters were retrofitted with a rotary axis to accommodate cylindrical mandrels as print beds, overcoming the limitations of planar print beds. The printing process using the new method was evaluated in terms of the mechanical, actuation, and synchronization characteristics of the linear and rotating axes, as well as the stability of the printing process. In this context, it became clear that extrusion-based printing processes are very sensitive to positioning errors when used with small nozzles. Despite these technical difficulties, the new process can produce single-layer, multilayer, and multimaterial structures with a wide range of pore geometries. In addition, extrusion-based printing processes can be combined with melt electrowriting to produce durable scaffolds with features in the micrometer to millimeter range. Overall, the suitability of this setup for a wide range of TE applications has thus been demonstrated.
RESUMO
With advances in algorithmic hearing aid research, the need for high-level programmable, behind-the-ear (BTE) wearable and low-power research platforms is emerging. These can be used to test new algorithms in real-world scenarios. Although various groups are developing different portable solutions, they are not in a BTE form factor. For this reason, the devices must be worn around the neck or somewhere on the body, which causes limited mobility and can lead to inaccurate research results. Therefore, this work presents a fully integrated and functional hearing aid research platform that weighs only 5 grams and can be worn behind the ear. The platform is high-level programmable, features wireless technologies such as near-field magnetic induction (NFMI) and Bluetooth Low Energy (BLE), and integrates two micro-electro-mechanical systems (MEMS) microphones and an external speaker. The audio processor of the system is based on a new custom, low-power 22nm mixed-signal system on chip (SoC). Different real-world use cases, like a dynamic compressor, are used to evaluate the platform. With a total power consumption of 47 mW, the rechargeable device achieves a run-time of six hours. When the wireless interfaces are turned off, the power consumption drops to 31 mW, and the run-time increases to nine hours.Clinical relevance-The proposed research hearing aid demonstration platform can be used portable and outside the clinical setting for algorithmic research. With its behind-the-ear form factor and rechargeable battery, studies can be conducted for several hours without restricting patient movement in real-world scenarios.
Assuntos
Auxiliares de Audição , Humanos , Campos Magnéticos , Tecnologia sem Fio , Fontes de Energia Elétrica , AlgoritmosRESUMO
The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has created a public crisis. Many medical and public institutions and businesses went into isolation in response to the pandemic. Because SARS-CoV-2 can spread irrespective of a patient's course of disease, these institutions' continued operation or reopening based on the assessment and control of virus spread can be supported by targeted population screening. For this purpose, virus testing in the form of polymerase chain reaction (PCR) analysis and antibody detection in blood can be central. Mobile SARS-CoV-2 screening facilities with a built-in biosafety level (BSL)-2 laboratory were set up to allow the testing offer to be brought close to the subject group's workplace. University staff members, their expertise, and already available equipment were used to implement and operate the screening facilities and a certified diagnostic laboratory. This operation also included specimen collection, transport, PCR and antibody analysis, and informing subjects as well as public health departments. Screening facilities were established at different locations such as educational institutions, nursing homes, and companies providing critical supply chains for health care. Less than 4 weeks after the first imposed lockdown in Germany, a first mobile testing station was established featuring a build-in laboratory with two similar stations commencing operation until June 2020. During the 15-month project period, approximately 33,000 PCR tests and close to 7000 antibody detection tests were collected and analyzed. The presented approach describes the required procedures that enabled the screening facilities and laboratories to collect and process several hundred specimens each day under difficult conditions. This report can assist others in establishing similar setups for pandemic scenarios.
RESUMO
Melt electro writing (MEW) is a high-resolution 3D printing technique that combines elements of electro-hydrodynamic fiber attraction and melts extrusion. The ability to precisely deposit micro- to nanometer strands of biocompatible polymers in a layer-by-layer fashion makes MEW a promising scaffold fabrication method for all kinds of tissue engineering applications. This review describes possibilities to optimize multi-parametric MEW processes for precise fiber deposition over multiple layers and prevent printing defects. Printing protocols for nonlinear scaffolds structures, concrete MEW scaffold pore geometries and printable biocompatible materials for MEW are introduced. The review discusses approaches to combining MEW with other fabrication techniques with the purpose to generate advanced scaffolds structures. The outlined MEW printer modifications enable customizable collector shapes or sacrificial materials for non-planar fiber deposition and nozzle adjustments allow redesigned fiber properties for specific applications. Altogether, MEW opens a new chapter of scaffold design by 3D printing.
RESUMO
Conventional synthetic vascular grafts require ongoing anticoagulation, and autologous venous grafts are often not available in elderly patients. This review highlights the development of bioartificial vessels replacing brain-dead donor- or animal-deriving vessels with ongoing immune reactivity. The vision for such bio-hybrids exists in a combination of biodegradable scaffolds and seeding with immune-neutral cells, and here different cells sources such as autologous progenitor cells or stem cells are relevant. This kind of in situ tissue engineering depends on a suitable bioreactor system with elaborate monitoring systems, three-dimensional (3D) visualization and a potential of cell conditioning into the direction of the targeted vascular cell phenotype. Necessary bioreactor tools for dynamic and pulsatile cultivation are described. In addition, a concept for design of vasa vasorum is outlined, that is needed for sustainable nutrition of the wall structure in large caliber vessels. For scaffold design and cell adhesion additives, different materials and technologies are discussed. 3D printing is introduced as a relatively new field with promising prospects, for example, to create complex geometries or micro-structured surfaces for optimal cell adhesion and ingrowth in a standardized and custom designed procedure. Summarizing, a bio-hybrid vascular prosthesis from a controlled biotechnological process is thus coming more and more into view. It has the potential to withstand strict approval requirements applied for advanced therapy medicinal products.
RESUMO
In neurological and neuropsychiatric disorders neuronal oscillatory activity between basal ganglia and cortical circuits are altered, which may be useful as biomarker for adaptive deep brain stimulation. We investigated whether changes in the spectral power of oscillatory activity in the motor cortex (MCtx) and the sensorimotor cortex (SMCtx) of rats after injection of the dopamine (DA) receptor antagonist haloperidol (HALO) would be similar to those observed in Parkinson disease. Thereafter, we tested whether a convolutional neural network (CNN) model would identify brain signal alterations in this acute model of parkinsonism. A sixteen channel surface micro-electrocorticogram (ECoG) recording array was placed under the dura above the MCtx and SMCtx areas of one hemisphere under general anaesthesia in rats. Seven days after surgery, micro ECoG was recorded in individual free moving rats in three conditions: (1) basal activity, (2) after injection of HALO (0.5 mg/kg), and (3) with additional injection of apomorphine (APO) (1 mg/kg). Furthermore, a CNN-based classification consisting of 23,530 parameters was applied on the raw data. HALO injection decreased oscillatory theta band activity (4-8 Hz) and enhanced beta (12-30 Hz) and gamma (30-100 Hz) in MCtx and SMCtx, which was compensated after APO injection (P ¡ 0.001). Evaluation of classification performance of the CNN model provided accuracy of 92%, sensitivity of 90% and specificity of 93% on one-dimensional signals. The CNN proposed model requires a minimum of sensory hardware and may be integrated into future research on therapeutic devices for Parkinson disease, such as adaptive closed loop stimulation, thus contributing to more efficient way of treatment.
Assuntos
Córtex Motor , Doença de Parkinson , Transtornos Parkinsonianos , Animais , Gânglios da Base , Redes Neurais de Computação , Transtornos Parkinsonianos/tratamento farmacológico , RatosRESUMO
Despite lockdown measures, intense symptom-based PCR, and antigen testing, the SARS-CoV-2 pandemic spread further. In this open observational study conducted in Lower Saxony, Germany, voluntary SARS-CoV-2 PCR tests were performed from April 2020 until June 2021, supported by serum antibody testing to prove whether PCR testing in subjects with none or few symptoms of COVID-19 is a suitable tool to manage the pandemic. In different mobile stations, 4,817 subjects from three different working fields participated in the PCR testing. Serum antibody screening using the SARS-CoV-2 ViraChip IgG (Viramed, Germany) and the Elecsys Anti-SARS-CoV-2 assay (Roche, Germany) was performed alongside virus neutralization testing. Subjects were questioned regarding comorbidities and COVID-19 symptoms. Fifty-one subjects with acute SARS-CoV-2 infection were detected of which 31 subjects did not show any symptoms possibly characteristic for COVID-19. An additional 37 subjects reported a previous SARS-CoV-2 infection (total prevalence 1.82%). Seroconversion was discovered in 58 subjects with known SARS-CoV-2 infection and in 58 subjects that never had a positive PCR test. The latter had a significantly lower Charlson Comorbidity Index, and one third of them were asymptomatic. In 50% of all seroconverted subjects, neutralizing serum antibodies (NAbs) were detectable in parallel to N/S1 (n = 16) or N/S1/S2 antigen specific antibodies (n = 40) against SARS-CoV-2. NAb titers decreased within 100 days after PCR-confirmed SARS-CoV-2 acute infection by at least 2.5-fold. A relatively high rate of subclinical SARS-CoV-2 infections may contribute to the spread of SARS-CoV-2, suggesting that in addition to other intervention strategies, systematic screening of asymptomatic persons by PCR testing may significantly enable better pandemic control. IMPORTANCE Within this open observational study, repeated PCR (n > 4,700) and antibody screening (n > 1,600) tests were offered in three different working fields. The study identified 51 subjects with acute SARS-CoV-2 infection and 37 subjects reported to have had a positive PCR test taken externally. Thirty-one of the 51 subjects did not display any symptoms prior to testing. In addition, 58 subjects without PCR-confirmed SARS-CoV-2 infection were identified by seroconversion. Subjects, that had undergone SARS-CoV-2 infection without having noticed, more often had a low grade of immunization with no NAbs, but may have relevantly contributed to the spread of the pandemic. Based on these results, we suggest that both regular PCR and rapid test screening of symptomatic and asymptomatic individuals, specifically within groups or workplaces identifiable as having close quarter contact, thus increased infection transference risk, is necessary to better assess and therefore reduce the spread of a pandemic virus.
Assuntos
Anticorpos Antivirais/sangue , COVID-19/epidemiologia , COVID-19/virologia , SARS-CoV-2/genética , SARS-CoV-2/imunologia , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Doenças Assintomáticas , COVID-19/sangue , Teste Sorológico para COVID-19 , Alemanha/epidemiologia , Humanos , Masculino , Pessoa de Meia-Idade , Reação em Cadeia da Polimerase , Estudos Prospectivos , SARS-CoV-2/isolamento & purificação , SARS-CoV-2/fisiologia , Soroconversão , Adulto JovemRESUMO
BACKGROUND: Detection of seroconversion after SARS-CoV-2-infection or vaccination is relevant to discover subclinical cases and recognize patients with a possible immunity. OBJECTIVES: Test performance, effects of age, time-point of seroconversion and immune status regarding neutralizing antibodies (NAbs) and T-cell-reactivity were investigated. STUDY DESIGN: Two antibody assays (Viramed-Test for S/N-specific IgG, Roche-Test for N-specific IgA, -M, -G) were evaluated with classified samples. In total, 381 subjects aged 6-99 years, who had either recovered from the disease or had been vaccinated, were screened for SARS-CoV-2-specific antibodies. This screening was part of an open observational study with working adults. Additionally, children and adults were analyzed in a longitudinal COVID-19 study in schools. For immunity evaluation, virus neutralization tests and ELISpot tests were performed in a subgroup of subjects. RESULTS: Viramed revealed a slightly lower test performance than Roche, but test quality was equally well in samples from very young or very old donors. The time-point of seroconversion after the respective immunization detected by the two tests was not significantly different. N-specific antibodies, detected with Roche, highly correlated with NAbs in recovered subjects, whereas a positive Viramed-Test result was paralleled by a positive ELISpot result. CONCLUSION: Viramed-Test was not as sensitive as Roche-Test, but highly specific and beneficial to distinguish between recovered and vaccinated status. For both tests correlations with humoral and cellular immunity were found. Of note, the expected early detection of IgA and IgM by the Roche-Test did not prove to be an advantage over IgG testing by Viramed.
Assuntos
COVID-19 , SARS-CoV-2 , Adulto , Criança , Humanos , COVID-19/diagnóstico , Sensibilidade e Especificidade , Anticorpos Antivirais , Anticorpos Neutralizantes , Imunoglobulina G , Imunoglobulina ARESUMO
PURPOSE: The COVID-19 pandemic affects students in a myriad of different ways. Our prospective, longitudinal study in a cohort of students in Hannover, Germany explores behavioral patterns during escalating COVID-19 restrictions. METHODS: In total, 777 students between the age of 9 and 20 were assessed for their activity engagement, travel patterns, and self-assessed compliance with protective recommendations at six time points between June 2020 and June 2021 (3,564 observations) and were monitored for severe acute respiratory syndrome coronavirus 2 infection by nasal swab polymerase chain reaction and serum antibody titers. RESULTS: Activity engagement decreased, but self-assessed compliance with measures such as mask wearing and social distancing was stable during escalating restrictions. Although we found no sex difference during the summer break, when incidence was lowest, females engaged in a higher variety of activities than males for all other time points. Older students engaged in more activities and self-assigned themselves lower compliance values than younger ones. Greater involvement in different activities was seen in households which traveled more frequently. Infection rate in our cohort was low (0.03% acute infections, 1.94% positive seroprevalence). DISCUSSION: Our study supports the view that, overall, students show high compliance with COVID-19 recommendations and restrictions. The identification of subsets, such as female and older students, with higher risk behavioral patterns should be considered when implementing public information campaigns. In light of the low infection rate in our cohort, we conclude that in-person learning can occur safely if extensive protective measures are in place and the incidence in the general population remains moderate.
Assuntos
COVID-19 , Adolescente , Criança , Feminino , Humanos , Estudos Longitudinais , Masculino , Pandemias , Estudos Prospectivos , SARS-CoV-2 , Estudos SoroepidemiológicosRESUMO
In general, the signal chain in modern mobile Brain-Computer Interfaces (BCIs) is subdivided into at least two blocks. These are usually wirelessly connected with digital signal processing part implemented separately and often stationary. This causes a limited mobility and results in an additional, although avoidable, latency due to the wireless transmission channel. Therefore, a novel, entirely mobile FPGA-based platform for BCIs has been designed and implemented. While featuring highly efficient adaptability to targeted algorithms due to the ultra low power Flash-based FPGA, the stackable system design and the configurable hardware ensure flexibility for the use in different application scenarios. Powered through a single Li-ion battery, the miniaturized system area of half the size of a credit card leads to high mobility and thus allow for real-world scenario applicability. A Bluetooth Low Energy extension can be connected without any significant area cost, if a wireless data or control signal transmission channel is required. The resulting system is capable of acquiring and fully processing of up to 32 EEG channels with 24 bit precision each and a sampling rate of 250-16k samples per second with a total weight less than 60 g.
Assuntos
Interfaces Cérebro-Computador , Algoritmos , Computadores , Fontes de Energia Elétrica , Processamento de Sinais Assistido por ComputadorRESUMO
In an aging society, diseases associated with irreversible damage of organs are frequent. An increasing percentage of patients requires bioartificial tissue or organ substitutes. Tissue engineering products depend on a well-defined process to ensure successful cultivation while meeting high regulatory demands. The goal of the presented work is the development of a bioreactor system for the cultivation of tissue-engineered vascular grafts (TEVGs) for autologous implantation and transition from a lab scale setup to standardized production. Key characteristics include (i) the automated reliable monitoring and control of a wide-range of parameters regarding implant conditioning, (ii) easy and sterile setup and operation, (iii) reasonable costs of disposables, and (iv) parallelization of automated cultivation processes. The presented prototype bioreactor system provides comprehensive physiologically conditioning, sensing, and imaging functionality to meet all requirements for the successful cultivation of vascular grafts on a productional scale.
Assuntos
Bioprótese , Prótese Vascular , Envelhecimento , Reatores Biológicos , Humanos , Engenharia TecidualRESUMO
When two individuals interact in a collaborative task, such as carrying a sofa or a table, usually spatiotemporal coordination of individual motor behavior will emerge. In many cases, interpersonal coordination can arise independently of verbal communication, based on the observation of the partners' movements and/or the object's movements. In this study, we investigate how social coupling between two individuals can emerge in a collaborative task under different modes of perceptual information. A visual reference condition was compared with three different conditions with new types of additional auditory feedback provided in real time: effect-based auditory feedback, performance-based auditory feedback, and combined effect/performance-based auditory feedback. We have developed a new paradigm in which the actions of both participants continuously result in a seamlessly merged effect on an object simulated by a tablet computer application. Here, participants should temporally synchronize their movements with a 90° phase difference and precisely adjust the finger dynamics in order to keep the object (a ball) accurately rotating on a given circular trajectory on the tablet. Results demonstrate that interpersonal coordination in a joint task can be altered by different kinds of additional auditory information in various ways.
RESUMO
Cardiovascular disease is the most common cause of death, accounting for 31% of deaths worldwide. As purely synthetic grafts implicate concomitant anticoagulation and autologous veins are rare, tissue-engineered vascular grafts are urgently needed. For successful in vitro cultivation of a bioartificial vascular graft, the suitable bioreactor should provide conditions comparable to vasculogenesis in the body. Such a system has been developed and characterized under continuous and pulsatile flow, and a variety of sensors has been integrated into the bioreactor to control parameters such as temperature, pressure up to 500 mbar, glucose up to 4.5 g/L, lactate, oxygen up to 150 mbar, and flow rate. Wireless data transfer (using the ZigBee specification based on the IEEE 802.15.4 standard) and multiple corresponding sensor signal processing platforms have been implemented as well. Ultrasound is used for touchless monitoring of the growing vascular structure as a quality control before implantation (maximally achieved ultrasound resolution 65 µm at 15 MHz). To withstand the harsh conditions of steam sterilization (120°C for 20 min), all electronics were encapsulated. With such a comprehensive physiologically conditioning, sensing, and imaging bioreactor system, all the requirements for a successful cultivation of vascular grafts are available now.
RESUMO
A common approach for high accuracy sensor fusion based on 9D inertial measurement unit data is Kalman filtering. State of the art floating-point filter algorithms differ in their computational complexity nevertheless, real-time operation on a low-power microcontroller at high sampling rates is not possible. This work presents algorithmic modifications to reduce the computational demands of a two-step minimum order Kalman filter. Furthermore, the required bit-width of a fixed-point filter version is explored. For evaluation real-world data captured using an Xsens MTx inertial sensor is used. Changes in computational latency and orientation estimation accuracy due to the proposed algorithmic modifications and fixed-point number representation are evaluated in detail on a variety of processing platforms enabling on-board processing on wearable sensor platforms.
Assuntos
Processamento de Sinais Assistido por Computador , Algoritmos , Simulação por Computador , Humanos , Modelos Lineares , OrientaçãoRESUMO
Heart development, especially the critical phase of cardiac looping, is a complex and intricate process that has not yet been visualized "live" over long periods of time. We have constructed and established a new environmental incubator chamber that provides stable conditions for embryonic development with regard to temperature, humidity, and oxygen levels. We have integrated a video microscope in the chamber to visualize the developing heart in real time and present the first "live" recordings of a chick embryo in shell-less culture acquired over a period of 2 days. The time-lapse images we show depict a significant time window that covers the most critical and typical morphogenetic events during normal cardiac looping. Our system is of interest to researchers in the field of embryogenesis, as it can be adapted to a variety of animal models for organogenesis studies including heart and limb development.