Examining lung microstructure using 19 F MR diffusion imaging in COPD patients.

PURPOSE: To examine the time-dependent diffusion of fluorinated (19 F) gas in human lungs for determination of surface-to-volume ratio in comparison to results from hyperpolarized 129 Xe and lung function testing in healthy volunteers and patients with chronic obstructive pulmonary disease. METHODS: Diffusion of fluorinated gas in the short-time regime was measured using multiple gradient-echo sequences with a single pair of trapezoidal gradient pulses. Pulmonary surface-to-volume ratio was calculated using a first-order approximation of the time-dependent diffusion in a study with 20 healthy volunteers and 22 patients with chronic obstructive pulmonary disease. The repeatability after 7 days as well as the correlation with hyperpolarized 129 Xe diffusion MRI and lung function testing was analyzed. RESULTS: Using 19 F diffusion MRI, the median surface-to-volume ratio is significantly decreased in chronic obstructive pulmonary disease patients (S/V = 126 cm-1 [87-144 cm-1 ]) compared with healthy volunteers (S/V = 164 cm-1 [160-84 cm-1 ], p < 0.0001). No significant difference was found between measurements within 7 days for healthy (p = 0.88, median coefficient of variation = 4.3%) and diseased subjects (p = 0.58, median coefficient of variation= 6.7%). Linear correlations were found with S/V from 129 Xe diffusion MRI (r = 0.85, p = 0.001) and the forced expiratory volume in 1 second (r = 0.68, p < 0.0001). CONCLUSION: Examination of lung microstructure using time-dependent diffusion measurement of inhaled 19 F is feasible, repeatable, and correlates with established measurements.

1 H-guided reconstruction of 19 F gas MRI in COPD patients.

PURPOSE: To reduce acquisition time and improve image quality and robustness of ventilation assessment in a single breath-hold using 1 H-guided reconstruction of fluorinated gas (19 F) MRI. METHODS: Reconstructions constraining total variation in the image domain, L1 norm in the wavelet domain, and directional total variation between 19 F and 1 H images were compared in order to accelerate 19 F ventilation imaging using retrospectively undersampled data from a healthy volunteer. Using the optimal constrained reconstruction in 8 patients with chronic obstructive pulmonary disease (16-seconds breath-hold), ventilation maps of various acceleration factors (2-fold to 13-fold) were compared with maps of the full data set using the Dice coefficient, difference in volume defect percentage and overlap percentage, as well as hyperpolarized 129 Xe gas MRI. RESULTS: The reconstruction constraining total variation and directional total variation simultaneously performed best in the healthy volunteer (RMS error = 0.07, structural similarity index = 0.77) for a measurement time of 2 seconds. Using the same reconstruction in the patients with chronic obstructive pulmonary disease, the Dice coefficient of defect volumes was 0.86 ± 0.05, the mean difference in volume defect percentage was -1.0 ± 1.7 percentage points, and the overlap percentage was 87% ± 2% for a measurement time of 6 seconds. Between volume defect percentage of 19 F and 129 Xe, a linear correlation (r = 0.75; P = .03) was found, with 19 F volume defect percentage being significantly higher (mean difference = 11%; P = .04). CONCLUSION: 1 H-guided reconstruction of pulmonary 19 F gas MRI enables reduction of acquisition time while maintaining image quality and robustness of functional parameters.

Regional investigation of lung function and microstructure parameters by localized 129 Xe chemical shift saturation recovery and dissolved-phase imaging: A reproducibility study.

PURPOSE: To evaluate the reproducibility and regional variation of parameters obtained from localized 129 Xe chemical shift saturation recovery (CSSR) MR spectroscopy in healthy volunteers and patients with chronic obstructive pulmonary disease (COPD) and to compare the results to 129 Xe dissolved-phase MR imaging. METHODS: Thirteen healthy volunteers and 10 COPD patients were scanned twice using 129 Xe dissolved-phase imaging, CSSR, and ventilation imaging sequences. A 16-channel phased-array coil in combination with the regularized spectral localization achieved by sensitivity heterogeneity (SPLASH) method was used to perform a regional analysis of CSSR data. Lung function and microstructural parameters were obtained using Patz model functions and their reproducibility was assessed. RESULTS: The Patz model alveolar wall thickness parameter shows good reproducibility on a regional basis with a median coefficient of variation of 6.5% in healthy volunteers and 12.4% in COPD patients. Significant regional differences of lung function parameters derived from localized CSSR were found in healthy volunteers and correlations with spirometric indices were found. CONCLUSION: Localized 129 Xe CSSR provides reproducible estimates of alveolar wall thickness and is able to detect regional differences of lung microstructure.

Prevalence of pericardial effusion in autosomal dominant polycystic kidney disease.

Background: Autosomal dominant polycystic kidney disease (ADPKD) has numerous extrarenal manifestations. Pericardial effusion (PE) may be an underrecognized complication with a reported prevalence of up to 35%. Our study is the first to systematically evaluate the prevalence of PE and associated risk factors in an ADPKD cohort outside the USA. Methods: Clinically stable ADPKD patients from a specialized outpatient clinic were evaluated retrospectively. Magnetic resonance tomography and computed tomography scans were analysed regarding the presence of PE (≥4 mm). Imaging results were linked to clinical characteristics. Results: Of 286 ADPKD patients, 208 had computed tomography or magnetic resonance imaging suitable for evaluation of PE. In this group we detected PE in 17 patients (8.2%). The overall prevalence of PE was 6.3%, with more females being affected (prevalence of PE was 7.8% in females and 3.8% in males). The PE mean size was 6.8 ± 3.3 mm. The prevalence of autoimmune diseases was higher in the patients with PE (11.8% versus 2.1%, P = .022), while the presence and size of PE was not associated with signs of rapid progressive disease, ADPKD genotype, patient age, body mass index and other clinical parameters. Exploratory investigation of individual characteristics of PE patients by regression tree analysis suggested renal functional impairment, sex and proteinuria as candidate variables. Conclusions: PE prevalence in our cohort was lower than previously reported and showed a clear female preponderance. Our data suggest that patients with PEs >10 mm deserve further attention, as they may have additional non-ADPKD-related pathologies.

Clinical assessment of tibial torsion differences. Do we always need a computed tomography?

BACKGROUND: Tibial torsional malalignment presents a well-known complication of intramedullary nailing for tibial shaft fractures. PURPOSE: Objective of this study was to investigate the ability to clinically assess tibial torsion differences. Computed Tomography (CT) was used here as the gold standard. Further, intra- and inter-observer reliability of the clinical examination, and radiological measurements were calculated. METHODS: Fifty-one patients with torsion-difference CTs, obtained for various reasons, were asked to kneel on an examination couch with free hanging feet. All patients are positioned with 90° flexed knee and neutral ankle. A picture of the lower extremities was obtained from the back of the patient. Two blinded orthopedic surgeons were asked to look at the pictures and measure the tibial torsion with a digital goniometer, based on the axis of the femur in relation to the second ray of the foot. To determine the intra-observer variation, the torsional angles were calculated again after 4 weeks. To be able to compare values, two blinded radiologists calculated torsional differences based on computed tomography. RESULTS: All patients were able to be positioned for clinical assessment (n = 51). Clinical assessment of torsional difference revealed 4.55° ± 6.85 for the first, respectively, 4.55° ± 7.41 for the second investigator. The second measurement of the first investigator revealed a value of 4.57° ± 6.9. There was a good intra-observer agreement for clinical assessment (ICC 0.993, p < 0.001). Also, the inter-observer agreement showed a good inter-observer agreement (ICC 0.949, p < 0.001). Evaluation of radiological inter-observer assessment could also show a good inter-observer agreement (ICC 0.922, p < 0.001). The clinical method showed a good correlation to the CT method (0.839, p < 0.001). Additionally, the Bland-Altman plot was used to compare graphically both measurement techniques, which proved the agreement. CONCLUSION: In summary, computed tomography-assisted measurement of tibial torsion and clinical assessment correlated significantly good. In addition to that, clinical measurement has a good intra- and inter-observer reliability. Clinical examination is a reliable and cost-effective tool to detect mal-torsion and should be part of the repertoire of every surgeon.

Correlation of size-dependent conversion factor and body-mass-index using size-specific dose estimates formalism in CT examinations.

PURPOSE: The aim of this investigation is to establish the relationship between the size-dependent conversion factor (fsize) and the body-mass-index (BMI) and to test whether BMI can be substituted for the conventionally used patients' anterior-posterior (AP) and lateral (LAT) dimensions for calculation of fsize. By calculating fsize on the basis of BMI instead of the AP and LAT measurements, size-specific dose estimates (SSDE) could be determined prior to image acquisition. METHODS: Our institute utilizes a dose monitoring software to record radiation exposure during CT examinations. The datasets gathered during each examination contain information regarding the scan protocol, the volumetric computed tomography dose index (CTDIvol), SSDE and BMI. fsize is traditionally calculated through measurement of AP and LAT dimensions. In this work, the dose monitoring system calculates AP and LAT diameters at the middle of scout views. For purpose of this investigation, we used data from 13544 patients who underwent CT examinations of the torso, head or knee (both) to compare fsize as calculated from the AP and LAT dimensions to fsize calculated as a function of BMI. RESULTS: In the examinations of the torso, we observed an exponentially decreasing correlation between fsize and BMI. In the examinations of the head and knee (both), fsize reflected an almost independent behavior to BMI. CONCLUSION: This study demonstrates that it is possible to estimate fsize by using the patients' BMI for the torso as well as the head and knee CT, thereby enabling calculation of the probable SSDE prior to image acquisition on the basis of the presumed CTDIvol provided by the scanner. By providing information on the expected patient dose prior to image acquisition, this method is advantageous over the traditional calculation of fsize via the AP and LAT dimensions.