Integration Host Factor Binds DNA Holliday Junctions.

Integration host factor (IHF) is a nucleoid-associated protein involved in DNA packaging, integration of viral DNA and recombination. IHF binds with nanomolar affinity to duplex DNA containing a 13 bp consensus sequence, inducing a bend of ~160° upon binding. We determined that IHF binds to DNA Four-way or Holliday junctions (HJ) with high affinity regardless of the presence of the consensus sequence, signifying a structure-based mechanism of recognition. Junctions, important intermediates in DNA repair and homologous recombination, are dynamic and can adopt either an open or stacked conformation, where the open conformation facilitates branch migration and strand exchange. Using ensemble and single molecule Förster resonance energy transfer (FRET) methods, we investigated IHF-induced changes in the population distribution of junction conformations and determined that IHF binding shifts the population to the open conformation. Further analysis of smFRET dynamics revealed that even in the presence of protein, the junctions remain dynamic as fast transitions are observed for the protein-bound open state. Protein binding alters junction conformational dynamics, as cross correlation analyses reveal the protein slows the transition rate at 1 mM Mg2+ but accelerates the transition rate at 10 mM Mg2+. Stopped flow kinetic experiments provide evidence for two binding steps, a rapid, initial binding step followed by a slower step potentially associated with a conformational change. These measurements also confirm that the protein remains bound to the junction during the conformer transitions and further suggest that the protein forms a partially dissociated state that allows junction arms to be dynamic. These findings, which demonstrate that IHF binds HJs with high affinity and stabilizes junctions in the open conformation, suggest that IHF may play multiple roles in the processes of integration and recombination in addition to stabilizing bacterial biofilms.

Alignment of the protein substrate hairpin along the SecA two-helix finger primes protein transport in Escherichia coli.

A conserved hairpin-like structure comprised of a signal peptide and early mature region initiates protein transport across the SecY or Sec61α channel in Bacteria or Archaea and Eukarya, respectively. When and how this initiator substrate hairpin forms remains a mystery. Here, we have used the bacterial SecA ATPase motor protein and SecYEG channel complex to address this question. Engineering of a functional miniprotein substrate onto the end of SecA allowed us to efficiently form ternary complexes with SecYEG for spectroscopic studies. Förster resonance energy transfer mapping of key residues within this ternary complex demonstrates that the protein substrate adopts a hairpin-like structure immediately adjacent to the SecA two-helix finger subdomain before channel entry. Comparison of ADP and ATP-γS-bound states shows that the signal peptide partially inserts into the SecY channel in the latter state. Our study defines a unique preinsertion intermediate state where the SecA two-helix finger appears to play a role in both templating the substrate hairpin at the channel entrance and promoting its subsequent ATP-dependent insertion.

Mismatch Recognition by Saccharomyces cerevisiae Msh2-Msh6: Role of Structure and Dynamics.

The mismatch repair (MMR) pathway maintains genome integrity by correcting errors such as mismatched base pairs formed during DNA replication. In MMR, Msh2-Msh6, a heterodimeric protein, targets single base mismatches and small insertion/deletion loops for repair. By incorporating the fluorescent nucleoside base analog 6-methylisoxanthopterin (6-MI) at or adjacent to a mismatch site to probe the structural and dynamic elements of the mismatch, we address how Msh2-Msh6 recognizes these mismatches for repair within the context of matched DNA. Fluorescence quantum yield and rotational correlation time measurements indicate that local base dynamics linearly correlate with Saccharomyces cerevisiae Msh2-Msh6 binding affinity where the protein exhibits a higher affinity (KD ≤ 25 nM) for mismatches that have a significant amount of dynamic motion. Energy transfer measurements measuring global DNA bending find that mismatches that are both well and poorly recognized by Msh2-Msh6 experience the same amount of protein-induced bending. Finally, base-specific dynamics coupled with protein-induced blue shifts in peak emission strongly support the crystallographic model of directional binding, in which Phe 432 of Msh6 intercalates 3' of the mismatch. These results imply an important role for local base dynamics in the initial recognition step of MMR.

MutSγ-Induced DNA Conformational Changes Provide Insights into Its Role in Meiotic Recombination.

In many organisms, MutSγ plays a role in meiotic recombination, facilitating crossover formation between homologous chromosomes. Failure to form crossovers leads to improper segregation of chromosomes and aneuploidy, which in humans result in infertility and birth defects. To improve current understanding of MutSγ function, this study investigates the binding affinities and structures of MutSγ in complex with DNA substrates that model homologous recombination intermediates. For these studies, we overexpressed and isolated from Escherichia coli the yeast MutSγ protein Saccharomyces cerevisiae (Sc) Msh4-Msh5. Sc Msh4-Msh5 binds Holliday junction (HJ)-like substrates, 3' overhangs, single-stranded (ss) forks, and the displacement loop with nanomolar affinity. The weakest binding affinities are detected for an intact duplex and open-junction construct. Similar to the human protein, Sc Msh4-Msh5 exhibits the highest affinity for the HJ with a Kd < 0.4 nM in solution. Energy-transfer experiments further demonstrate that DNA structure is modulated by the binding interaction with the largest changes associated with substrates containing an ss end. Upon binding, Sc Msh4-Msh5 displaces the ss away from the duplex in most of the ss-containing intermediates, potentially enabling the binding of RPA and other proteins. In the case of the junction-like intermediates, Msh4-Msh5 binding either stabilizes the existing stacked structure or induces formation of the stacked X conformation. Significantly, we find that upon binding, Msh4-Msh5 stacks an open-junction construct to the same extent as the standard junction. Stabilization of the junction in the stacked conformation is generally refractory to branch migration, which is consistent with a potential role for MutSγ to stabilize HJs and prevent branch migration until resolution by MutLγ. The different binding modalities observed suggest that Msh4-Msh5 not only binds to and stabilizes stacked junctions but also participates in meiotic recombination before junction formation through the stabilization of single-end invasion intermediates.

The Stories Tryptophans Tell: Exploring Protein Dynamics of Heptosyltransferase I from Escherichia coli.

Heptosyltransferase I (HepI) catalyzes the addition of l-glycero-ß-d-manno-heptose to Kdo2-Lipid A, as part of the biosynthesis of the core region of lipopolysaccharide (LPS). Gram-negative bacteria with gene knockouts of HepI have reduced virulence and enhanced susceptibility to hydrophobic antibiotics, making the design of inhibitors of HepI of interest. Because HepI protein dynamics are partially rate-limiting, disruption of protein dynamics might provide a new strategy for inhibiting HepI. Discerning the global mechanism of HepI is anticipated to aid development of inhibitors of LPS biosynthesis. Herein, dynamic protein rearrangements involved in the HepI catalytic cycle were probed by combining mutagenesis with intrinsic tryptophan fluorescence and circular dichroism analyses. Using wild-type and mutant forms of HepI, multiple dynamic regions were identified via changes in Trp fluorescence. Interestingly, Trp residues (Trp199 and Trp217) in the C-terminal domain (which binds ADP-heptose) are in a more hydrophobic environment upon binding of ODLA to the N-terminal domain. These residues are adjacent to the ADP-heptose binding site (with Trp217 in van der Waals contact with the adenine ring of ADP-heptose), suggesting that the two binding sites interact to report on the occupancy state of the enzyme. ODLA binding was also accompanied by a significant stabilization of HepI (heating to 95 °C fails to denature the protein when it is in the presence of ODLA). These results suggest that conformational rearrangements, from an induced fit model of substrate binding to HepI, are important for catalysis, and the disruption of these conformational dynamics may serve as a novel mechanism for inhibiting this and other glycosyltransferase enzymes.

Conserved SecA Signal Peptide-Binding Site Revealed by Engineered Protein Chimeras and Förster Resonance Energy Transfer.

Signal peptides are critical for the initiation of protein transport in bacteria by virtue of their recognition by the SecA ATPase motor protein followed by their transfer to the lateral gate region of the SecYEG protein-conducting channel complex. In this study, we have constructed and validated the use of signal peptide-attached SecA chimeras for conducting structural and functional studies on the initial step of SecA signal peptide interaction. We utilized this system to map the location and orientation of the bound alkaline phosphatase and KRRLamB signal peptides to a peptide-binding groove adjacent to the two-helix finger subdomain of SecA. These results support the existence of a single conserved SecA signal peptide-binding site that positions the signal peptide parallel to the two-helix finger subdomain of SecA, and they are also consistent with the proposed role of this subdomain in the transfer of the bound signal peptide from SecA into the protein-conducting channel of SecYEG protein. In addition, our work highlights the utility of this system to conveniently engineer and study the interaction of SecA with any signal peptide of interest as well as its potential use for X-ray crystallographic studies given issues with exogenous signal peptide solubility.

Fabrication and Experimental Analysis of Axially Oriented Nanofibers.

A novel design of a laboratory built axially rotating collector (ARC) having capability to align electrospun nanofibers have been described. A detailed morphological comparison of such nanofibers orientation and their geometry is done using scanning electron microscopy (SEM). For comparison various polymeric solutions were electrospun on conventional static collector as well as ARC. The average diameter of polyvinyl alcohol (PVA) nanofibers was found to be 250 nm while polycaprolactone (PCL) nanofibers were found to be within a range of 600-800 nm. Conducting nanoparticles such as graphene and multi-walled carbon nanotubes (MWNTs) mixed with polymer solutions shown to have a significant influence on the overall geometry of these nanofibers and their diameter distribution. It is evident from the SEM analysis that both graphene and MWNTs in polymer solution play a crucial role in achieving a uniform diameter of nanofibers. Lastly, the formation of the aligned nanofibers using ARC has been mathematically modeled and the electromagnetic field governing the process has been simulated.

Probing the Ion Binding Site in a DNA Holliday Junction Using Förster Resonance Energy Transfer (FRET).

Holliday Junctions are critical DNA intermediates central to double strand break repair and homologous recombination. The junctions can adopt two general forms: open and stacked-X, which are induced by protein or ion binding. In this work, fluorescence spectroscopy, metal ion luminescence and thermodynamic measurements are used to elucidate the ion binding site and the mechanism of junction conformational change. Förster resonance energy transfer measurements of end-labeled junctions monitored junction conformation and ion binding affinity, and reported higher affinities for multi-valent ions. Thermodynamic measurements provided evidence for two classes of binding sites. The higher affinity ion-binding interaction is an enthalpy driven process with an apparent stoichiometry of 2.1 ± 0.2. As revealed by Eu(3+) luminescence, this binding class is homogeneous, and results in slight dehydration of the ion with one direct coordination site to the junction. Luminescence resonance energy transfer experiments confirmed the presence of two ions and indicated they are 6-7 Å apart. These findings are in good agreement with previous molecular dynamics simulations, which identified two symmetrical regions of high ion density in the center of stacked junctions. These results support a model in which site-specific binding of two ions in close proximity is required for folding of DNA Holliday junctions into the stacked-X conformation.

Site-Specific Investigation of DNA Holliday Junction Dynamics and Structure with 6-Methylisoxanthopterin, a Fluorescent Guanine Analog.

DNA Holliday Junction (HJ) formation and resolution is requisite for maintaining genomic stability in processes such as replication fork reversal and double-strand break repair. If HJs are not resolved, chromosome disjunction and aneuploidy result, hallmarks of tumor cells. To understand the structural features that lead to processing of these four-stranded joint molecule structures, we seek to identify structural and dynamic features unique to the central junction core. We incorporate the fluorescent guanine analog 6-methylisoxanthopterin (6-MI) at ten different locations throughout a model HJ structure to obtain site-specific information regarding the structure and dynamics of bases relative to those in a comparable sequence context in duplex DNA. These comparisons were accomplished through measuring fluorescence lifetime, relative brightness, fluorescence anisotropy, and thermodynamic stability, along with fluorescence quenching assays. These time-resolved and steady-state fluorescence measurements demonstrate that the structural distortions imposed by strand crossing result in increased solvent exposure, less stacking of bases and greater extrahelical nature of bases within the junction core. The 6-MI base analogs in the junction reflect these structural changes through an increase in intensity relative to those in the duplex. Molecular dynamics simulations performed using a model HJ indicate the primary sources of deformation are in the shift and twist parameters of the bases at the central junction step. These results suggest that junction-binding proteins may use the unique structure and dynamics of the bases at the core for recognition.

Defining the solution state dimer structure of Escherichia coli SecA using Förster resonance energy transfer.

The Sec machinery constitutes the major pathway for protein translocation in bacteria. SecA is thought to act as a molecular motor driving translocation of the preprotein across the membrane by repeated ATP-driven cycles of insertion and retraction at the translocon channel. SecA is predominately a dimer under physiological conditions; however, its oligomeric state during active protein translocation is still unresolved. Five SecA crystal structures have been determined, each displaying a different dimer interface, suggesting that SecA may adopt different dimer configurations. In this study, a Förster resonance energy transfer approach was utilized with nine functional monocysteine SecA mutants labeled with appropriate dyes to determine the predominant solution state dimer. Three different dye pairs allowed interprotomer distances ranging from 20 to 140 Å to be investigated. Comparison of 15 experimentally determined distances with those predicted from X-ray structures showed the greatest agreement with the Bacillus subtilis SecA antiparallel dimer structure [Hunt, J., Weinkauf, S., Henry, L., Fak, J. J., McNicholas, P., Oliver, D. B., and Deisenhfer, J. (2002) Science 297, 2018-2026]. The binding of two signal peptides to SecA was also examined to determine their effect on SecA dimer structure. We found that the SecA dimer is maintained upon peptide binding; however, the preprotein cross-linking domain (PPXD) and helical wing domain regions experience significant conformational changes, and the PPXD movement is greatly enhanced by binding of an extended signal peptide containing 19 additional residues. Modeling of an "open" antiparallel dimer structure suggests that binding of preprotein to SecA induces an activated open conformation suitable for binding to SecYEG.

Molecular dynamics of a DNA Holliday junction: the inverted repeat sequence d(CCGGTACCGG)4.

All-atom molecular dynamics (MD) computer simulations have been applied successfully to duplex DNA structures in solution for some years and found to give close accord with observed results. However, the MD force fields have generally not been parameterized against unusual DNA structures, and their use to obtain dynamical models for this class of systems needs to be independently validated. The four-way junction (4WJ), or Holliday junction, is a dynamic DNA structure involved in central cellular processes of homologous replication and double strand break repair. Two conformations are observed in solution: a planar open-X form (OPN) with a mobile center and four duplex arms, and an immobile stacked-X (STX) form with two continuous strands and two crossover strands, stabilized by high salt conditions. To characterize the accuracy of MD modeling on 4WJ, we report a set of explicit solvent MD simulations of ∼100 ns on the repeat sequence d(CCGGTACCGG)(4) starting from the STX structure (PDB code 1dcw), and an OPN structure built for the same sequence. All 4WJ MD simulations converged to a stable STX structure in close accord with the crystal structure. Our MD beginning in the OPN form converts to the STX form spontaneously at both high and low salt conditions, providing a model for the conformational transition. Thus, these simulations provide a successful account of the dynamical structure of the STX form of d(CCGGTACCGG)(4) in solution, and provide new, to our knowledge, information on the conformational stability of the junction and distribution of counterions in the junction interior.

Applying 6-methylisoxanthopterin-enhanced fluorescence to examine protein-DNA interactions in the picomolar range.

Incorporation of fluorescent nucleoside analogues into duplex DNA usually leads to a reduction in quantum yield, which significantly limits their potential use and application. We have identified two pentamer DNA sequences containing 6-methylisoxanthopterin (6-MI) (ATFAA and AAFTA, where F is 6-MI) that exhibit significant enhancement of fluorescence upon formation of duplex DNA with quantum yields close to that of monomeric 6-MI. The enhanced fluorescence dramatically increases the utility and sensitivity of the probe and is used to study protein-DNA interactions of nanomolar specificity in this work. The increased sensitivity of 6-MI allows anisotropy binding measurements to be performed at DNA concentrations of 1 nM and fluorescence intensity measurements at 50 pM DNA. The ATFAA sequence was incorporated into DNA constructs to measure the binding affinity of four different protein-DNA interactions that exhibit sequence-specific and non-sequence-specific recognition. In all cases, the K(d) values obtained were consistent with previously reported values measured by other methods. Time-resolved and steady-state fluorescence measurements demonstrate that 6-MI fluorescence is very sensitive to local distortion and reports on different degrees of protein-induced perturbations with single-base resolution, where the largest changes occur at the site of protein binding.

Analysis of high-affinity binding of protein kinase R to double-stranded RNA.

Protein kinase R (PKR) is an interferon-induced kinase that plays a pivotal role in the innate immunity response to viral infection. PKR is activated upon binding to double-stranded RNA (dsRNA). Our previous analysis of binding of PKR to dsRNAs ranging from 20 to 40 bp supports a dimerization model for activation in which 30 bp represents the minimal length required to bind two PKR monomers and activate PKR via autophosphorylation. These studies were complicated by the formation of protein-RNA aggregates, particularly at low salt concentrations using longer dsRNAs. Here, we have taken advantage of the enhanced sensitivity afforded using fluorescence-detected analytical ultracentrifugation to reduce the RNA concentrations from micromolar to nanomolar. Under these conditions, we are able to characterize high-affinity binding of PKR to longer dsRNAs in 75 mM NaCl. The PKR binding stoichiometries are increased at lower salt concentrations but remain lower than those previously obtained for the dsRNA binding domain. The dependence of the limiting PKR binding stoichiometries on dsRNA length does not conform to standard models for nonspecific binding and suggests that binding to longer sequences occurs via a different binding mode with a larger site size. Although dimerization plays a key role in the PKR activation mechanism, the ability of shorter dsRNAs to bind two PKR monomers is not sufficient to induce autophosphorylation. We propose that activation of PKR by longer RNAs is correlated with an alternative binding mode in which both of the dsRNA binding motifs contact the RNA, inducing PKR to dimerize via a direct interaction of the kinase domains.

Förster Resonance Energy Transfer Mapping: A New Methodology to Elucidate Global Structural Features.

Förster resonance energy transfer (FRET) is an established fluorescence-based method used to successfully measure distances in and between biomolecules in vitro as well as within cells. In FRET, the efficiency of energy transfer, measured by changes in fluorescence intensity or lifetime, relates to the distance between two fluorescent molecules or labels. Determination of dynamics and conformational changes from the distances are just some examples of applications of this method to biological systems. Under certain conditions, this methodology can add to and enhance existing X-ray crystal structures by providing information regarding dynamics, flexibility, and adaptation to binding surfaces. We describe the use of FRET and associated distance determinations to elucidate structural properties, through the identification of a binding site or the orientations of dimer subunits. Through judicious choice of labeling sites, and often employment of multiple labeling strategies, we have successfully applied these mapping methods to determine global structural properties in a protein-DNA complex and the SecA-SecYEG protein translocation system. In the SecA-SecYEG system, we have used FRET mapping methods to identify the preprotein-binding site and determine the local conformation of the bound signal sequence region. This study outlines the steps for performing FRET mapping studies, including identification of appropriate labeling sites, discussion of possible labels including non-native amino acid residues, labeling procedures, how to perform measurements, and interpreting the data.

HU binding to a DNA four-way junction probed by Förster resonance energy transfer.

The Escherichia coli protein HU is a non-sequence-specific DNA-binding protein that interacts with DNA primarily through electrostatic interactions. In addition to nonspecific binding to linear DNA, HU has been shown to bind with nanomolar affinity to discontinuous DNA substrates, such as repair and recombination intermediates. This work specifically examines the HU-four-way junction (4WJ) interaction using fluorescence spectroscopic methods. The conformation of the junction in the presence of different counterions was investigated by Förster resonance energy transfer (FRET) measurements, which revealed an ion-type conformational dependence, where Na(+) yields the most stacked conformation followed by K(+) and Mg(2+). HU binding induces a greater degree of stacking in the Na(+)-stabilized and Mg(2+)-stabilized junctions but not the K(+)-stabilized junction, which is attributed to differences in the size of the ionic radii and potential differences in ion binding sites. Interestingly, junction conformation modulates binding affinity, where HU exhibits the lowest affinity for the Mg(2+)-stabilized form (24 µM(-1)), which is the least stacked conformation. Protein binding to a mixed population of open and stacked forms of the junction leads to nearly complete formation of a protein-stabilized stacked-X junction. These results strongly support a model in which HU binds to and stabilizes the stacked-X conformation.

Nitric oxide reduces sickle hemoglobin polymerization: potential role of nitric oxide-induced charge alteration in depolymerization.

We previously demonstrated that inhaling nitric oxide (NO) increases the oxygen affinity of sickle red blood cells (RBCs) in patients with sickle cell disease (SCD). Our recent studies found that NO lowered the P(50) values of sickle hemoglobin (HbS) hemolysates but did not increase methemoglobin (metHb) levels, supporting the role of NO, but not metHb, in the oxygen affinity of HbS. Here we examine the mechanism by which NO increases HbS oxygen affinity. Because anti-sickling agents increase sickle RBC oxygen affinity, we first determined whether NO exhibits anti-sickling properties. The viscosity of HbS hemolysates, measured by falling ball assays, increased upon deoxygenation; NO treatment reduced the increment. Multiphoton microscopic analyses showed smaller HbS polymers in deoxygenated sickle RBCs and HbS hemolysates exposed to NO. These results suggest that NO inhibits HbS polymer formation and has anti-sickling properties. Furthermore, we found that HbS treated with NO exhibits an isoelectric point similar to that of HbA, suggesting that NO alters the electric charge of HbS. NO-HbS adducts had the same elution time as HbA upon high performance liquid chromatography analysis. This study demonstrates that NO may disrupt HbS polymers by abolishing the excess positive charge of HbS, resulting in increased oxygen affinity.

SUMO fosters assembly and functionality of the MutSγ complex to facilitate meiotic crossing over.

Crossing over is essential for chromosome segregation during meiosis. Protein modification by SUMO is implicated in crossover control, but pertinent targets have remained elusive. Here we identify Msh4 as a target of SUMO-mediated crossover regulation. Msh4 and Msh5 constitute the MutSγ complex, which stabilizes joint-molecule (JM) recombination intermediates and facilitates their resolution into crossovers. Msh4 SUMOylation enhances these processes to ensure that each chromosome pair acquires at least one crossover. Msh4 is directly targeted by E2 conjugase Ubc9, initially becoming mono-SUMOylated in response to DNA double-strand breaks, then multi/poly-SUMOylated forms arise as homologs fully engage. Mechanistically, SUMOylation fosters interaction between Msh4 and Msh5. We infer that initial SUMOylation of Msh4 enhances assembly of MutSγ in anticipation of JM formation, while secondary SUMOylation may promote downstream functions. Regulation of Msh4 by SUMO is distinct and independent of its previously described stabilization by phosphorylation, defining MutSγ as a hub for crossover control.

Mapping of the signal peptide-binding domain of Escherichia coli SecA using Förster resonance energy transfer.

Identification of the signal peptide-binding domain within SecA ATPase is an important goal for understanding the molecular basis of SecA preprotein recognition as well as elucidating the chemo-mechanical cycle of this nanomotor during protein translocation. In this study, Forster resonance energy transfer methodology was employed to map the location of the SecA signal peptide-binding domain using a collection of functional monocysteine SecA mutants and alkaline phosphatase signal peptides labeled with appropriate donor-acceptor fluorophores. Fluorescence anisotropy measurements yielded an equilibrium binding constant of 1.4 or 10.7 muM for the alkaline phosphatase signal peptide labeled at residue 22 or 2, respectively, with SecA, and a binding stoichiometry of one signal peptide bound per SecA monomer. Binding affinity measurements performed with a monomer-biased mutant indicate that the signal peptide binds equally well to SecA monomer or dimer. Distance measurements determined for 13 SecA mutants show that the SecA signal peptide-binding domain encompasses a portion of the preprotein cross-linking domain but also includes regions of nucleotide-binding domain 1 and particularly the helical scaffold domain. The identified region lies at a multidomain interface within the heart of SecA, surrounded by and potentially responsive to domains important for binding nucleotide, mature portions of the preprotein, and the SecYEG channel. Our FRET-mapped binding domain, in contrast to the domain identified by NMR spectroscopy, includes the two-helix finger that has been shown to interact with the preprotein during translocation and lies at the entrance to the protein-conducting channel in the recently determined SecA-SecYEG structure.

Real time monitoring of sickle cell hemoglobin fiber formation by UV resonance Raman spectroscopy.

In sickle cell hemoglobin, individual tetramers associate into long fibers as a consequence of the mutation at the beta6 position. In this study UV resonance Raman spectroscopy is used to monitor the formation of Hb S fibers in real time through aromatic amino acid vibrational modes. The intermolecular contact formed by the mutation site ((1)beta(1)6 Glu-->Val) of one tetramer and the (2)beta(2)85 Phe-(2)beta(2)88 Leu hydrophobic pocket on a different tetramer is observed by monitoring the increase in signal intensity of Phe vibrational modes as a function of time, yielding kinetic progress curves similar to those obtained by turbidity measurements. Comparison of individual spectra collected at early time points (<1000 s) show small Phe intensity changes, which are attributed to weak transient associations of Hb S tetramers during the initial stages of the polymerization process. At later times (1000-2000 s) Phe signal intensity steadily increases because of increasing hydrophobicity of local Phe environment, a consequence of forming more stable (1)beta(1)-(2)beta(2) contacts. Tyr and Trp vibrational modes monitor H-bond strength between critical residues at the alpha(1)beta(2) interface of individual tetramers. Kinetic progress curves generated from these signals exhibit two distinct transitions at 2040 and 7340 s. These transitions, which occur later in time than those detected either by turbidity (1560 s) or by Phe signal intensity (1680 s), are attributed to initial fiber formation and subsequent formation of larger assemblies, such as macrofibers or gels. These results provide molecular insight into the interactions governing Hb S fiber formation.

Integration host factor (IHF) dictates the structure of polyamine-DNA condensates: implications for the role of IHF in the compaction of bacterial chromatin.

Integration host factor (IHF), a nucleoid-associated protein in bacterial cells, is implicated in a number of chromosomal functions including DNA compaction. IHF binds to all duplex DNA with micromolar affinity and at sequence-specific sites with much higher affinity. IHF is known to induce sharp bends in the helical axis of DNA in both modes of binding, but the role of IHF in controlling DNA condensation within bacterial cells has remained undetermined. Here we demonstrate that IHF influences the morphology of DNA condensed by polyamines in vitro. In the absence of IHF, spermidine and spermine condense DNA primarily into toroidal structures, whereas in the presence of IHF, polyamines condense DNA primarily into rodlike structures. Computer simulations of DNA condensation in the absence and presence of IHF binding lend support to our model in which DNA bending proteins, such as IHF and HU, promote the condensation of DNA into rodlike structures by providing the free energy necessary to bend DNA at the ends of linear bundles of condensed DNA. We propose that a common function of IHF and HU in bacterial cells is to facilitate DNA organization in the nucleoid by the introduction of sharp bends in chromosomal DNA.