Photoelectrochemical Proton-Coupled Electron Transfer of TiO2 Thin Films on Silicon.

TiO2 thin films are often used as protective layers on semiconductors for applications in photovoltaics, molecule-semiconductor hybrid photoelectrodes, and more. Experiments reported here show that TiO2 thin films on silicon are electrochemically and photoelectrochemically reduced in buffered acetonitrile at potentials relevant to photoelectrocatalysis of CO2 reduction, N2 reduction, and H2 evolution. On both n-type Si and irradiated p-type Si, TiO2 reduction is proton-coupled with a 1e-:1H+ stoichiometry, as demonstrated by the Nernstian dependence of the Ti4+/3+ E1/2 on the buffer pKa. Experiments were conducted with and without illumination, and a photovoltage of ∼0.6 V was observed across 20 orders of magnitude in proton activity. The 4 nm films are almost stoichiometrically reduced under mild conditions. The reduced films catalytically transfer protons and electrons to hydrogen atom acceptors, based on cyclic voltammogram, bulk electrolysis, and other mechanistic evidence. TiO2/Si thus has the potential to photoelectrochemically generate high-energy H atom carriers. Characterization of the TiO2 films after reduction reveals restructuring with the formation of islands, rendering TiO2 films as a potentially poor choice as protecting films or catalyst supports under reducing and protic conditions. Overall, this work demonstrates that atomic layer deposition TiO2 films on silicon photoelectrodes undergo both chemical and morphological changes upon application of potentials only modestly negative of RHE in these media. While the results should serve as a cautionary tale for researchers aiming to immobilize molecular monolayers on "protective" metal oxides, the robust proton-coupled electron transfer reactivity of the films introduces opportunities for the photoelectrochemical generation of reactive charge-carrying mediators.

Control of ZIF-62 and ag ZIF-62 Film Thickness within Asymmetric Tubular Supports through Pressure and Dose Time Variation of Atomic Layer Deposition.

Thin-films of metal-organic frameworks (MOFs) have widespread potential applications, especially with the emergence of glass-forming MOFs, which remove the inherent issue of grain boundaries and allow coherent amorphous films to be produced. Herein, it is established that atomic layer deposition (ALD) of zinc oxide lends excellent control over the thickness and localization of resultant polycrystalline and glass zeolitic imidazole framework-62 (ZIF-62) thin-films within tubular α-alumina supports. Through the reduction of the chamber pressure and dose times during zinc oxide deposition, the resultant ZIF-62 films are reduced from 38 µm to 16 µm, while the presence of sporadic ZIF-62 (previously forming as far as 280 µm into the support) is prevented. Furthermore, the glass transformation shows a secondary reduction in film thickness from 16 to 2 µm.

Multi-Electron Transfer at H-Terminated p-Si Electrolyte Interfaces: Large Photovoltages under Inversion Conditions.

Photovoltages for hydrogen-terminated p-Si(111) in an acetonitrile electrolyte were quantified with methyl viologen [1,1'-(CH3)2-4,4'-bipyridinium](PF6)2, abbreviated MV2+, and [Ru(bpy)3](PF6)2, where bpy is 2,2'-bipyridine, that respectively undergo two and three one-electron transfer reductions. The reduction potentials, E°, of the two MV2+ reductions occurred at energies within the forbidden bandgap, while the three [Ru(bpy)3]2+ reductions occurred within the continuum of conduction band states. Bandgap illumination resulted in reduction that was more positive than that measured with a degenerately doped n+-Si demonstrative of a photovoltage, Vph, that increased in the order MV2+/+ (260 mV) < MV+/0 (400 mV) < Ru2+/+ (530 mV) ∼ Ru+/0 (540 mV) ∼ Ru0/- (550 mV). Pulsed 532 nm excitation generated electron-hole pairs whose dynamics were nearly constant under depletion conditions and increased markedly as the potential was raised or lowered. A long wavelength absorption feature assigned to conduction band electrons provided additional evidence for the presence of an inversion layer. Collectively, the data reveal that the most optimal photovoltage, as well as the longest electron-hole pair lifetime and the highest surface electron concentration, occurs when E° lies energetically within the unfilled conduction band states where an inversion layer is present. The bell-shaped dependence for electron-hole pair recombination with the surface potential was predicted by the time-honored SRH model, providing a clear indication that this interface provides access to all four bias conditions, i.e., accumulation, flat band, depletion, and inversion. The implications of these findings for photocatalysis applications and solar energy conversion are discussed.

Reduced fatigue and leakage of ferroelectric TiN/Hf0.5Zr0.5O2/TiN capacitors by thin alumina interlayers at the top or bottom interface.

Hf0.5Zr0.5O2(HZO) thin films are promising candidates for non-volatile memory and other related applications due to their demonstrated ferroelectricity at the nanoscale and compatibility with Si processing. However, one reason that HZO has not been fully scaled into industrial applications is due to its deleterious wake-up and fatigue behavior which leads to an inconsistent remanent polarization during cycling. In this study, we explore an interfacial engineering strategy in which we insert 1 nm Al2O3interlayers at either the top or bottom HZO/TiN interface of sequentially deposited metal-ferroelectric-metal capacitors. By inserting an interfacial layer while limiting exposure to the ambient environment, we successfully introduce a protective passivating layer of Al2O3that provides excess oxygen to mitigate vacancy formation at the interface. We report that TiN/HZO/TiN capacitors with a 1 nm Al2O3at the top interface demonstrate a higher remanent polarization (2Pr∼ 42µC cm-2) and endurance limit beyond 108cycles at a cycling field amplitude of 3.5 MV cm-1. We use time-of-flight secondary ion mass spectrometry, energy dispersive spectroscopy, and grazing incidence x-ray diffraction to elucidate the origin of enhanced endurance and leakage properties in capacitors with an inserted 1 nm Al2O3layer. We demonstrate that the use of Al2O3as a passivating dielectric, coupled with sequential ALD fabrication, is an effective means of interfacial engineering and enhances the performance of ferroelectric HZO devices.

Doubly Protective MOF-Photo-Fabrics: Facile Template-Free Synthesis of PCN-222-Textiles Enables Rapid Hydrolysis, Photo-Hydrolysis and Selective Oxidation of Multiple Chemical Warfare Agents and Simulants.

New materials and chemical knowledge for improved personal protection are among the most pressing needs in the international community. Reported attacks using chemical warfare agents (CWAs,) including organophosphate soman (GD) and thioether mustard gas (HD) are driving research in field-deployable catalytic composites for rapid toxin degradation. In this work, we report simple template-free low temperature synthesis that enables for the first time, a deployable-structured catalytic metal-organic framework/polymer textile composite "MOF-fabric" showing rapid hydrolysis and oxidation of multiple active chemical warfare agents, GD and HD, respectively, and their simulants. Our method yields new zirconium-porphyrin based nano-crystalline PCN-222 MOF-fabrics with adjustable MOF loading and robust mechanical adhesion on low-cost nonwoven polypropylene fibers. Importantly, we describe quantitative kinetic analysis confirming that our MOF-fabrics are as effective as or better than analogous MOF powders for agent degradation, especially for oxidation. Faster oxidation using the MOF-fabrics is ascribed to the composite geometry, where active MOF catalysts are uniformly displayed on the MOF-textile enabling better reactant transport and reactive oxidant generation. Furthermore, we note the discovery of visible photo-activation of GD hydrolysis by a MOF-fabric, which is ascribed to oxidation at the active metal node site, significantly increasing the rate over that observed without illumination. These results provide important new insights into the design of future materials and chemical systems to protect military, first-responders, and civilians upon exposure to complex chemical toxins.

Water-Stable Chemical-Protective Textiles via Euhedral Surface-Oriented 2D Cu-TCPP Metal-Organic Frameworks.

Abatement of chemical hazards using adsorptive metal-organic frameworks (MOFs) attracts substantial attention, but material stability and crystal integration into functional systems remain key challenges. Herein, water-stable, polymer fiber surface-oriented M-TCPP [M = Cu, Zn, and Co; H2 TCPP = 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin] 2D MOF crystals are fabricated using a facile hydroxy double salt (HDS) solid-source conversion strategy. For the first time, Cu-TCPP is formed from a solid source and confirmed to be highly adsorptive for NH3 and 2-chloroethyl ethyl sulfide (CEES), a blistering agent simulant, in humid (80% relative humidity (RH)) conditions. Moreover, the solid HDS source is found as a unique new approach to control MOF thin-film crystal orientation, thereby facilitating radially arranged MOF crystals on fibers. On a per unit mass of MOF basis in humid conditions, the MOF/fiber composite enhances NH3 adsorptive capacity by a factor of 3 compared to conventionally prepared MOF powders. The synthesis route extends to other MOF/fiber composite systems, therefore providing a new route for chemically protective materials.

Understanding inherent substrate selectivity during atomic layer deposition: Effect of surface preparation, hydroxyl density, and metal oxide composition on nucleation mechanisms during tungsten ALD.

Area-selective thin film deposition is expected to be important for advanced sub-10 nanometer semiconductor devices, enabling feature patterning, alignment to underlying structures, and edge definition. Several atomic layer deposition (ALD) processes show inherent propensity for substrate-dependent nucleation. This includes tungsten ALD (W-ALD) which is more energetically favorable on Si than on SiO2. However, the selectivity is often lost after several ALD cycles. We investigated the causes of tungsten nucleation on SiO2 and other "non-growth" surfaces during the WF6/SiH4 W-ALD process to determine how to expand the "selectivity window." We propose that hydroxyls, generated during the piranha clean, act as nucleation sites for non-selective deposition and show that by excluding the piranha clean or heating the samples, following the piranha clean, extends the tungsten selectivity window. We also assessed how the W-ALD precursors interact with different oxide substrates though individual WF6 and SiH4 pre-exposures prior to W-ALD deposition. We conclude that repeated SiH4 pre-exposures reduce the tungsten nucleation delay, which is attributed to SiH4 adsorption on hydroxyl sites. In addition, oxide surfaces were repeatedly exposed to WF6, which appears to form metal fluoride species. We attribute the different tungsten nucleation delay on Al2O3 and TiO2 to the formation of nonvolatile and volatile metal fluoride species, respectively. Through this study, we have increased the understanding of ALD nucleation and substrate selectivity, which are pivotal to improving the selectivity window for W-ALD and other ALD processes.

STAT1-dependent and -independent pulmonary allergic and fibrogenic responses in mice after exposure to tangled versus rod-like multi-walled carbon nanotubes.

BACKGROUND: Pulmonary toxicity of multi-walled carbon nanotubes (MWCNTs) is influenced by physicochemical characteristics and genetic susceptibility. We hypothesized that contrasting rigidities of tangled (t) versus rod-like (r) MWCNTs would result in differing immunologic or fibrogenic responses in mice and that these responses would be exaggerated in transgenic mice lacking the signal transducer and activator of transcription-1 (STAT1), a susceptible mouse model of pulmonary fibrosis. METHODS: Male wild type (Stat1 +/+ ) and STAT1-deficient (Stat1 -/- ) mice were exposed to 4 mg/kg tMWCNTs, rMWCNTs, or vehicle alone via oropharyngeal aspiration and evaluated for inflammation at one and 21 days post-exposure via histopathology, differential cell counts, and cytokine levels in bronchoalveolar lavage fluid (BALF). Granuloma formation, mucous cell metaplasia, and airway fibrosis were evaluated by quantitative morphometry. Airway epithelial cell proliferation was assessed by bromodeoxyuridine (BrdU) incorporation. Cytokine protein levels in BALF and serum IgE levels were measured by ELISA. Lung protein Smad2/3 levels and activation were measured by Western blot. Lung mRNAs were measured by PCR. RESULTS: There was a 7-fold difference in rigidity between tMWCNTs and rMWCNTs as determined by static bending ratio. Both MWCNT types resulted in acute inflammation (neutrophils in BALF) after one-day post-exposure, yet only rMWCNTs resulted in chronic inflammation at 21 days as indicated by neutrophil influx and larger granulomas. Both MWCNTs induced BrdU uptake in airway epithelial cells, with the greatest proliferative response observed in rMWCNT-exposed mice after one-day. Only rMWCNTs induced mucous cell metaplasia, but this index was not different between genotypes. Stat1 -/- mice had higher levels of baseline serum IgE than Stat1 +/+ mice. Greater airway fibrosis was observed with rMWCNTs compared to tMWCNTs, and exaggerated airway fibrosis was seen in the Stat1 -/- mouse lungs with rMWCNTs but not tMWCNTs. Increased fibrosis correlated with elevated levels of TGF-ß1 protein levels in the BALF of Stat1 -/- mice exposed to rMWCNTs and increased lung Smad2/3 phosphorylation. CONCLUSIONS: Rigidity plays a key role in the toxicity of MWCNTs and results in increased inflammatory, immunologic, and fibrogenic effects in the lung. STAT1 is an important protective factor in the fibroproliferative response to rMWCNTs, regulating both induced TGF-ß1 production and Smad2/3 phosphorylation status. Therefore, both rigidity and genetic susceptibility should be major considerations for risk assessment of MWCNTs.

Diffusion of CO2 in Large Crystals of Cu-BTC MOF.

Carbon dioxide adsorption in metal-organic frameworks has been widely studied for applications in carbon capture and sequestration. A critical component that has been largely overlooked is the measurement of diffusion rates. This paper describes a new reproducible procedure to synthesize millimeter-scale Cu-BTC single crystals using concentrated reactants and an acetic acid modulator. Microscopic images, X-ray diffraction patterns, Brunauer-Emmett-Teller surface areas, and thermogravimetric analysis results all confirm the high quality of these Cu-BTC single crystals. The large crystal size aids in the accurate measurement of micropore diffusion coefficients. Concentration-swing frequency response performed at varying gas-phase concentrations gives diffusion coefficients that show very little dependence on the loading up to pressures of 0.1 bar. The measured micropore diffusion coefficient for CO2 in Cu-BTC is 1.7 × 10(-9) m(2)/s.

Wicking Enhancement in Three-Dimensional Hierarchical Nanostructures.

Wicking, the absorption of liquid into narrow spaces without the assistance of external forces, has drawn much attention due to its potential applications in many engineering fields. Increasing surface roughness using micro/nanostructures can improve capillary action to enhance wicking. However, reducing the structure length scale can also result in significant viscous forces to impede wicking. In this work, we demonstrate enhanced wicking dynamics by using nanostructures with three-dimensional (3D) hierarchical features to increase the surface area while mitigating the obstruction of liquid flow. The proposed structures were engineered using a combination of interference lithography and hydrothermal synthesis of ZnO nanowires, where structures at two length scales were independently designed to control wicking behavior. The fabricated hierarchical 3D structures were tested for water and ethanol wicking properties, demonstrating improved wicking dynamics with intermediate nanowire lengths. The experimental data agree with the derived fluid model based on the balance of capillary and vicious forces. The hierarchical wicking structures can be potentially used in applications in water harvesting surfaces, microfluidics, and integrated heat exchangers.

Atomic layer deposition coating of carbon nanotubes with zinc oxide causes acute phase immune responses in human monocytes in vitro and in mice after pulmonary exposure.

BACKGROUND: Atomic layer deposition (ALD) is a method for applying conformal nanoscale coatings on three-dimensional structures. We hypothesized that surface functionalization of multi-walled carbon nanotubes (MWCNTs) with polycrystalline ZnO by ALD would alter pro-inflammatory cytokine expression by human monocytes in vitro and modulate the lung and systemic immune response following oropharyngeal aspiration in mice. METHODS: Pristine (U-MWCNTs) were coated with alternating doses of diethyl zinc and water over increasing ALD cycles (10 to 100 ALD cycles) to yield conformal ZnO-coated MWCNTs (Z-MWCNTs). Human THP-1 monocytic cells were exposed to U-MWCNTs or Z-MWCNTs in vitro and cytokine mRNAs measured by Taqman real-time RT-PCR. Male C57BL6 mice were exposed to U- or Z-MWCNTs by oropharyngeal aspiration (OPA) and lung inflammation evaluated at one day post-exposure by histopathology, cytokine expression and differential counting of cells in bronchoalveolar lavage fluid (BALF) cells. Lung fibrosis was evaluated at 28 days. Cytokine mRNAs (IL-6, IL-1ß, CXCL10, TNF-α) in lung, heart, spleen, and liver were quantified at one and 28 days. DNA synthesis in lung tissue was measured by bromodeoxyuridine (BrdU) uptake. RESULTS: ALD resulted in a conformal coating of MWCNTs with ZnO that increased proportionally to the number of coating cycles. Z-MWCNTs released Zn(+2) ions in media and increased IL-6, IL-1ß, CXCL10, and TNF-α mRNAs in THP-1 cells in vitro. Mice exposed to Z-MWCNTs by OPA had exaggerated lung inflammation and a 3-fold increase in monocytes and neutrophils in BALF compared to U-MWCNTs. Z-MWCNTs, but not U-MWCNTs, induced IL-6 and CXCL10 mRNA and protein in the lungs of mice and increased IL-6 mRNA in heart and liver. U-MWCNTs but not Z-MWCNTs stimulated airway epithelial DNA synthesis in vivo. Lung fibrosis at 28 days was not significantly different between mice treated with U-MWCNT or Z-MWCNT. CONCLUSIONS: Pulmonary exposure to ZnO-coated MWCNTs produces a systemic acute phase response that involves the release of Zn(+2), lung epithelial growth arrest, and increased IL-6. ALD functionalization with ZnO generates MWCNTs that possess increased risk for human exposure.

Solar water splitting in a molecular photoelectrochemical cell.

Artificial photosynthesis and the production of solar fuels could be a key element in a future renewable energy economy providing a solution to the energy storage problem in solar energy conversion. We describe a hybrid strategy for solar water splitting based on a dye sensitized photoelectrosynthesis cell. It uses a derivatized, core-shell nanostructured photoanode with the core a high surface area conductive metal oxide film--indium tin oxide or antimony tin oxide--coated with a thin outer shell of TiO2 formed by atomic layer deposition. A "chromophore-catalyst assembly" 1, [(PO3H2)2bpy)2Ru(4-Mebpy-4-bimpy)Rub(tpy)(OH2)](4+), which combines both light absorber and water oxidation catalyst in a single molecule, was attached to the TiO2 shell. Visible photolysis of the resulting core-shell assembly structure with a Pt cathode resulted in water splitting into hydrogen and oxygen with an absorbed photon conversion efficiency of 4.4% at peak photocurrent.

Crossing the divide between homogeneous and heterogeneous catalysis in water oxidation.

Enhancing the surface binding stability of chromophores, catalysts, and chromophore-catalyst assemblies attached to metal oxide surfaces is an important element in furthering the development of dye sensitized solar cells, photoelectrosynthesis cells, and interfacial molecular catalysis. Phosphonate-derivatized catalysts and molecular assemblies provide a basis for sustained water oxidation on these surfaces in acidic solution but are unstable toward hydrolysis and loss from surfaces as the pH is increased. Here, we report enhanced surface binding stability of a phosphonate-derivatized water oxidation catalyst over a wide pH range (1-12) by atomic layer deposition of an overlayer of TiO2. Increased stability of surface binding, and the reactivity of the bound catalyst, provides a hybrid approach to heterogeneous catalysis combining the advantages of systematic modifications possible by chemical synthesis with heterogeneous reactivity. For the surface-stabilized catalyst, greatly enhanced rates of water oxidation are observed upon addition of buffer bases -H2PO(-)(4)/HPO(2-)(4), B(OH)3/B(OH)2 O-, HPO(2-)4 /PO(3-)(4) - and with a pathway identified in which O-atom transfer to OH(-) occurs with a rate constant increase of 10(6) compared to water oxidation in acid.

Ultra-Fast Degradation of Chemical Warfare Agents Using MOF-Nanofiber Kebabs.

The threat associated with chemical warfare agents (CWAs) motivates the development of new materials to provide enhanced protection with a reduced burden. Metal-organic frame-works (MOFs) have recently been shown as highly effective catalysts for detoxifying CWAs, but challenges still remain for integrating MOFs into functional filter media and/or protective garments. Herein, we report a series of MOF-nanofiber kebab structures for fast degradation of CWAs. We found TiO2 coatings deposited via atomic layer deposition (ALD) onto polyamide-6 nanofibers enable the formation of conformal Zr-based MOF thin films including UiO-66, UiO-66-NH2 , and UiO-67. Cross-sectional TEM images show that these MOF crystals nucleate and grow directly on and around the nanofibers, with strong attachment to the substrates. These MOF-functionalized nanofibers exhibit excellent reactivity for detoxifying CWAs. The half-lives of a CWA simulant compound and nerve agent soman (GD) are as short as 7.3 min and 2.3 min, respectively. These results therefore provide the earliest report of MOF-nanofiber textile composites capable of ultra-fast degradation of CWAs.

Facile Conversion of Hydroxy Double Salts to Metal-Organic Frameworks Using Metal Oxide Particles and Atomic Layer Deposition Thin-Film Templates.

Rapid room-temperature synthesis of metal-organic frameworks (MOFs) is highly desired for industrial implementation and commercialization. Here we find that a (Zn,Cu) hydroxy double salt (HDS) intermediate formed in situ from ZnO particles or thin films enables rapid growth (<1 min) of HKUST-1 (Cu3(BTC)2) at room temperature. The space-time-yield reaches >3 × 10(4) kg·m(-3)·d(-1), at least 1 order of magnitude greater than any prior report. The high anion exchange rate of (Zn,Cu) hydroxy nitrate HDS drives the ultrafast MOF formation. Similarly, we obtained Cu-BDC, ZIF-8, and IRMOF-3 structures from HDSs, demonstrating synthetic generality. Using ZnO thin films deposited via atomic layer deposition, MOF patterns are obtained on pre-patterned surfaces, and dense HKUST-1 coatings are grown onto various form factors, including polymer spheres, silicon wafers, and fibers. Breakthrough tests show that the MOF-functionalized fibers have high adsorption capacity for toxic gases. This rapid synthesis route is also promising for new MOF-based composite materials and applications.

In Situ Conductance Analysis of Zinc Oxide Nucleation and Coalescence during Atomic Layer Deposition on Metal Oxides and Polymers.

Real time in situ conductance is collected continuously during atomic layer deposition (ALD) of zinc oxide films, and trends are used to study ALD nucleation on polypropylene, nylon-6, SiO2, TiO2, and Al2O3 substrates. The detailed conductance change during the ALD cycle is ascribed to changes in surface band bending upon precursor/reactant exposure. Conductive pathways form earlier on the inorganic surfaces than on the polymers, with Al2O3 substrates showing more rapid nucleation than SiO2 or TiO2, consistent with the expected density of nucleation sites (e.g., hydroxyl groups) on these different materials. The measured conductance is ohmic, and both two- and four-electrode configurations show the same data trends. Detailed analysis of conductivity at deposition temperatures between 100 and 175 °C shows faster conductivity decay at higher temperature during the water purge step, ascribed to thermally activated water desorption kinetics. Analysis of real-time conductivity during ALD of other material systems could provide further insight into key aspects of film nucleation and nuclei coalescence.

Atomic layer deposition of TiO2 on mesoporous nanoITO: conductive core-shell photoanodes for dye-sensitized solar cells.

Core-shell structures consisting of thin shells of conformal TiO2 deposited on high surface area, conductive Sn-doped In2O3 nanoparticle. Mesoscopic films were synthesized by atomic layer deposition and studied for application in dye-sensitized solar cells. Results obtained with the N719 dye show that short-circuit current densities, open-circuit voltages, and back electron transfer lifetimes all increased with increasing TiO2 shell thickness up to 1.8-2.4 nm and then decline as the thickness was increased further. At higher shell thicknesses, back electron transfer to -Ru(III) is increasingly competitive with transport to the nanoITO core resulting in decreased device efficiencies.

Visible light driven benzyl alcohol dehydrogenation in a dye-sensitized photoelectrosynthesis cell.

Light-driven dehydrogenation of benzyl alcohol (BnOH) to benzaldehyde and hydrogen has been shown to occur in a dye-sensitized photoelectrosynthesis cell (DSPEC). In the DSPEC, the photoanode consists of mesoporous films of TiO2 nanoparticles or of core/shell nanoparticles with tin-doped In2O3 nanoparticle (nanoITO) cores and thin layers of TiO2 deposited by atomic layer deposition (nanoITO/TiO2). Metal oxide surfaces were coderivatized with both a ruthenium polypyridyl chromophore in excess and an oxidation catalyst. Chromophore excitation and electron injection were followed by cross-surface electron-transfer activation of the catalyst to -Ru(IV)═O(2+), which then oxidizes benzyl alcohol to benzaldehyde. The injected electrons are transferred to a Pt electrode for H2 production. The nanoITO/TiO2 core/shell structure causes a decrease of up to 2 orders of magnitude in back electron-transfer rate compared to TiO2. At the optimized shell thickness, sustained absorbed photon to current efficiency of 3.7% was achieved for BnOH dehydrogenation, an enhancement of ~10 compared to TiO2.

Atmospheric pressure atomic layer deposition of Al2O3 using trimethyl aluminum and ozone.

High throughput spatial atomic layer deposition (ALD) often uses higher reactor pressure than typical batch processes, but the specific effects of pressure on species transport and reaction rates are not fully understood. For aluminum oxide (Al2O3) ALD, water or ozone can be used as oxygen sources, but how reaction pressure influences deposition using ozone has not previously been reported. This work describes the effect of deposition pressure, between ∼2 and 760 Torr, on ALD Al2O3 using TMA and ozone. Similar to reports for pressure dependence during TMA/water ALD, surface reaction saturation studies show self-limiting growth at low and high pressure across a reasonable temperature range. Higher pressure tends to increase the growth per cycle, especially at lower gas velocities and temperatures. However, growth saturation at high pressure requires longer O3 dose times per cycle. Results are consistent with a model of ozone decomposition kinetics versus pressure and temperature. Quartz crystal microbalance (QCM) results confirm the trends in growth rate and indicate that the surface reaction mechanisms for Al2O3 growth using ozone are similar under low and high total pressure, including expected trends in the reaction mechanism at different temperatures.

Stabilizing chromophore binding on TiO2 for long-term stability of dye-sensitized solar cells using multicomponent atomic layer deposition.

Ambient humidity and high temperature are known to degrade dye-sensitized solar cells (DSSCs) via chromophore desorption. Recently, enhanced dye-attachment to TiO2 surfaces has been realized by coating molecularly functionalized surfaces with inorganic atomic layer deposition (ALD) coatings. Here, we apply this ALD approach to DSSCs and demonstrate that high energy conversion efficiencies can be maintained while significantly extending device lifetimes. While single component ALD layers show improved high-temperature stability, it significantly degraded up to 45% of initial DSSC performance right after ALD. We, however, find that mixed component ALD layers provide initial efficiencies within 90% of their untreated counterparts while still extending device lifetimes. Optimized ALD protection schemes maintain 80% of their initial efficiency after 500 h of thermal aging at 80 °C whereas efficiency of DSSCs with no ALD protection drop below 60% of their initial efficiencies. IR spectroscopy conducted in situ during ALD reveals that carboxylate linker groups transition from unbound or weakly-bound states, respectively, to more strongly bound bidentate structures. This strategy to improve dye-attachment by ALD while maintaining high performance is novel and promising for extending the functional lifetime for DSSCs and other related devices.