RESUMO
Composite polymer electrolytes are systems of choice for future solid-state lithium metal batteries (LMBs). Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) is among the most interesting matrices to develop new generation quasi-solid electrolytes (QSEs). Here it is reported on nanocomposites made of PVDF-HFP and pegylated SiO2 nanoparticles. Silica-based hybrid nanofillers are obtained by grafting chains of poly(ethylene glycol) methyl ether (PEG) with different molecular weight on the surface of silica nanoparticles. The functionalized nanofiller improves the mechanical, transport and electrochemical properties of the QSEs, which show good ionic conductivity values and high resistance against dendrite penetration, ensuring boosted long and safe device operation. The most promising result is obtained by dispersing 5 wt% of SiO2 functionalized with short PEG chains (PEG750, Mw = 750 g mol-1) in the PVDF-HFP matrix with an ease solvent-casting procedure. It shows ionic conductivity of 0.1 mS cm-1 at 25 °C, more than 250 h resistance to stripping/plating, and impressive results during cycling tests in LMB with LiFePO4 cathode.
RESUMO
Lithium metal batteries (LMBs) will be a breakthrough in automotive applications, but they require the development of next-generation solid-state electrolytes (SSEs) to stabilize the anode interface. Polymer-in-ceramic PEO/TiO2 nanocomposite SSEs show outstanding properties, allowing unprecedented LMBs durability and self-healing capabilities. However, the mechanism underlying the inhibition/delay of dendrite growth is not well understood. In fact, the inorganic phase could act as both a chemical and a mechanical barrier to dendrite propagation. Combining advanced in situ and ex situ experimental techniques, we demonstrate that oligo(ethylene oxide)-capped TiO2, although chemically inert toward lithium metal, imparts SSE with mechanical and dynamical properties particularly favorable for application. The self-healing characteristics are due to the interplay between mechanical robustness and high local polymer mobility which promotes the disruption of the electric continuity of the lithium dendrites (razor effect).
RESUMO
The cluster [Co38As12(CO)50]4- was obtained by pyrolysis of [Co6As(CO)16]-. The metal cage features a closed-packed core inside a Co/As shell that progressively deforms from a cubic face-centered symmetry. The redox and acid-base reactivities were determined by cyclic voltammetry and spectrophotometric titrations. The calculated electron density revealed the shell-constrained distribution of the atomic charges, induced by the presence of arsenic.
Assuntos
Metais , OxirreduçãoRESUMO
The most common MXene composition Ti3C2Tx (T = F, O) shows outstanding stability as anode for sodium ion batteries (100% of capacity retention after 530 cycles with charge efficiency >99.7%). However, the reversibility of the intercalation/deintercalation process is strongly affected by the synthesis parameters determining, in turn, significant differences in the material structure. This study proposes a new approach to identify the crystal features influencing the performances, using a structural model built with a multitechnique approach that allows exploring the short-range order of the lamella. The model is then used to determine the long-range order by inserting defective elements into the structure. With this strategy it is possible to fit the MXene diffraction patterns, obtain the structural parameters including the stoichiometric composition of the terminations (neutron data), and quantify the structural disorder which can be used to discriminate the phases with the best electrochemical properties.
RESUMO
Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).
RESUMO
The chemical groups present at the surface of graphite have been thought for a long time to be mainly responsible for its catalytic activity in the oxygen reduction reaction. Recently, it was proposed that the surface defects of graphite also significantly contribute to promote this reaction. Although the behaviour of surface defects has been reported, only few comments have been dedicated to their involvement in the mechanism and the possible intermediate species in the oxygen reduction reaction. Herein, we aim to present a more detailed explanation of the catalytic activity of graphite particles based on the structure of their defects and their size. Structural, spectroscopic and magnetic investigation (X-ray diffraction, Raman and electron spin resonance) and electrochemical measurements were performed to describe the nature of the defects and their aptitude to transfer electrons. Computational description supplied precise details of the energy of the different defects and their ability to promote the reduction, also suggesting the structure of the intermediate adduct in the oxygen reduction. The results indicated that molecular oxygen preferentially interacts with graphite defects, which involve the π-electron system and accumulation of the spin density on the edges of the grains, in particular, on the zig-zag edges present on ball-milled graphite. This promotes the reactivity of this nanomaterial. Furthermore, the activation increases by decreasing the particle size.
RESUMO
Rechargeable sodium-ion batteries are becoming a viable alternative to lithium-based technology in energy storage strategies, due to the wide abundance of sodium raw material. In the past decade, this has generated a boom of research interest in such systems. Notwithstanding the large number of research papers concerning sodium-ion battery electrodes, the development of a low-cost, well-performing anode material remains the largest obstacle to overcome. Although the well-known anatase, one of the allotropic forms of natural TiO2, was recently proposed for such applications, the material generally suffers from reduced cyclability and limited power, due to kinetic drawbacks and to its poor charge transport properties. A systematic approach in the morphological tuning of the anatase nanocrystals is needed, to optimize its structural features toward the electrochemical properties and to promote the material interaction with the conductive network and the electrolyte. Aiming to face with these issues, we were able to obtain a fine tuning of the nanoparticle morphology and to expose the most favorable nanocrystal facets to the electrolyte and to the conductive wrapping agent (graphene), thus overcoming the intrinsic limits of anatase transport properties. The result is a TiO2-based composite electrode able to deliver an outstandingly stability over cycles (150 mA h g-1 for more than 600 cycles in the 1.5-0.1 V potential range) never achieved with such a low content of carbonaceous substrate (5%). Moreover, it has been demonstrated for the first time than these outstanding performances are not simply related to the overall surface area of the different morphologies but have to be directly related to the peculiar surface characteristics of the crystals.
RESUMO
Nickel hexacyanoferrate (NiHCFe) is an attractive cathode material in both aqueous and organic electrolytes due to a low-cost synthesis using earth-abundant precursors and also due to its open framework, Prussian blue-like crystal structure that enables ultra-long cycle life, high energy efficiency, and high power capability. Herein, we explored the effect of different alkali ions on the insertion electrochemistry of NiHCFe in aqueous and propylene carbonate-based electrolytes. The large channel diameter of the structure offers fast solid-state diffusion of Li(+), Na(+), and K(+) ions in aqueous electrolytes. However, all alkali ions in organic electrolytes and Rb(+) and Cs(+) in aqueous electrolytes show a quasi-reversible electrochemical behavior that results in poor galvanostatic cycling performance. Kinetic regimes in aqueous electrolyte were also determined, highlighting the effect of the size of the alkali ion on the electrochemical properties.
RESUMO
A facile and fast approach, based on microwave-enhanced Sonogashira coupling, has been employed to obtain in good yields both mono- and, for the first time, disubstituted push-pull Zn(II) porphyrinates bearing a variety of ethynylphenyl moieties at the ß-pyrrolic position(s). Furthermore, a comparative experimental, electrochemical, and theoretical investigation has been carried out on these ß-mono- or disubstituted Zn(II) porphyrinates and meso-disubstituted push-pull Zn(II) porphyrinates. We have obtained evidence that, although the HOMO-LUMO energy gap of the meso-substituted push-pull dyes is lower, so that charge transfer along the push-pull system therein is easier, the ß-mono- or disubstituted push-pull porphyrinic dyes show comparable or better efficiencies when acting as sensitizers in DSSCs. This behavior is apparently not attributable to more intense B and Q bands, but rather to more facile charge injection. This is suggested by the DFT electron distribution in a model of a ß-monosubstituted porphyrinic dye interacting with a TiO2 surface and by the positive effect of the ß substitution on the incident photon-to-current conversion efficiency (IPCE) spectra, which show a significant intensity over a broad wavelength range (350-650â nm). In contrast, meso-substitution produces IPCE spectra with two less intense and well-separated peaks. The positive effect exerted by a cyanoacrylic acid group attached to the ethynylphenyl substituent has been analyzed by a photophysical and theoretical approach. This provided supporting evidence of a contribution from charge-transfer transitions to both the B and Q bands, thus producing, through conjugation, excited electrons close to the carboxylic anchoring group. Finally, the straightforward and effective synthetic procedures developed, as well as the efficiencies observed by photoelectrochemical measurements, make the described ß-monosubstituted Zn(II) porphyrinates extremely promising sensitizers for use in DSSCs.
RESUMO
Among the materials for the negative electrodes in Li-ion batteries, oxides capable of reacting with Li+ via intercalation/conversion/alloying are extremely interesting due to their high specific capacities but suffer from poor mechanical stability. A new way to design nanocomposites based on the (Ti/Sn)O2 system is the partial oxidation of the tin-containing MAX phase of Ti3 Al(1-x) Snx O2 composition. Exploiting this strategy, this work develops composite electrodes of (Ti/Sn)O2 and MAX phase capable of withstanding over 600 cycles in half cells with charge efficiencies higher than 99.5% and specific capacities comparable to those of graphite and higher than lithium titanate (Li4 Ti5 O12 ) or MXenes electrodes. These unprecedented electrochemical performances are also demonstrated at full cell level in the presence of a low cobalt content layered oxide and explained through an accurate chemical, morphological, and structural investigation which reveals the intimate contact between the MAX phase and the oxide particles. During the oxidation process, electroactive nanoparticles of TiO2 and Ti(1-y) Sny O2 nucleate on the surface of the unreacted MAX phase which therefore acts both as a conductive agent and as a buffer to preserve the mechanical integrity of the oxide during the lithiation and delithiation cycles.
RESUMO
Sodium-ion batteries have recently aroused the interest of industries as possible replacements for lithium-ion batteries in some areas. With their high theoretical capacities and competitive prices, P2-type layered oxides (NaxTMO2) are among the obvious choices in terms of cathode materials. On the other hand, many of these materials are unstable in air due to their reactivity toward water and carbon dioxide. Here, Na0.67Mn0.9Ni0.1O2 (NMNO), one of such materials, has been synthesized by a classic sol-gel method and then exposed to air for several weeks as a way to allow a simple and reproducible transition toward a Na-rich birnessite phase. The transition between the anhydrous P2 to the hydrated birnessite structure has been followed via periodic XRD analyses, as well as neutron diffraction ones. Extensive electrochemical characterizations of both pristine NMNO and the air-exposed one vs sodium in organic medium showed comparable performances, with capacities fading from 140 to 60 mAh g-1 in around 100 cycles. Structural evolution of the air-exposed NMNO has been investigated both with ex situ synchrotron XRD and Raman. Finally, DFT analyses showed similar charge compensation mechanisms between P2 and birnessite phases, providing a reason for the similarities between the electrochemical properties of both materials.
RESUMO
Highly concentrated aqueous binary solutions of acetate salts are promising systems for different electrochemical applications, for example, energy storage devices. The very high solubility of CH3COOK allows us to obtain water-in-salt electrolyte concentrations, thus reducing ion activity and extending the cathodic stability of an aqueous electrolyte. At the same time, the presence of Li+ or Na+ makes these solutions compatible with intercalation materials for the development of rechargeable alkaline-ion batteries. Although there is a growing interest in these systems, a fundamental understanding of their physicochemical properties is still lacking. Here, we report and discuss the physicochemical and electrochemical properties of a series of solutions based on 20 mol kg-1 CH3COOK with different concentrations of CH3COONa. The most concentrated solution, 20 mol kg-1 CH3COOK + 7 mol kg-1 CH3COONa, gives the best compromise between transport properties and electrochemical stability, displaying a conductivity of 21.2 mS cm-1 at 25 °C and a stability window of up to 3 V in "ideal" conditions, i.e., using a small surface area and highly electrocatalytic electrode in a flooded cell. Careful Raman spectroscopy analyses help to address the interaction network, the phase evolution with temperature, and the crystallization kinetics.
RESUMO
A new general synthetic access to carboxylated quaterpyridines (qpy), of interest as ligands for panchromatic dye-sensitized solar cell organometallic sensitizers, is presented. The strategic step is a Suzuki-Miyaura cross-coupling reaction, which has allowed the preparation of a number of representative unsubstituted and alkyl and (hetero)aromatic substituted qpys. To bypass the poor inherent stability of 2-pyridylboronic acid derivatives, we successfully applied N-methyliminodiacetic acid (MIDA) boronates as key reagents, obtaining the qpy ligands in good yields up to (quasi)gram quantities. The structural, spectroscopic (NMR and UV-vis), electrochemical, and electronic characteristics of the qpy have been experimentally and computationally (DFT) investigated. The easy access to the bis-thiocyanato Ru(II) complex of the parent species of the qpy series, through an efficient route which bypasses the use of Sephadex column chromatography, is shown. The bis-thiocyanato Ru(II) complex has been spectroscopically (NMR and UV-vis), electrochemically, and computationally investigated, relating its properties to those of previously reported Ru(II)-qpy complexes.
RESUMO
The present study reports on the synthesis and the electrochemical behavior of Na(0.71)CoO(2), a promising candidate as cathode for Na-based batteries. The material was obtained in two different morphologies by a double-step route, which is cheap and easy to scale up: the hydrothermal synthesis to produce Co(3)O(4) with tailored and nanometric morphology, followed by the solid-state reaction with NaOH, or alternatively with Na(2)CO(3), to promote Na intercalation. Both products are highly crystalline and have the P2-Na(0.71)CoO(2) crystal phase, but differ in the respective morphologies. The material obtained from Na(2)CO(3) have a narrow particle length (edge to edge) distribution and 2D platelet morphology, while those from NaOH exhibit large microcrystals, irregular in shape, with broad particle length distribution and undefined exposed surfaces. Electrochemical analysis shows the good performances of these materials as a positive electrode for Na-ion half cells. In particular, Na(0.71)CoO(2) thin microplatelets exhibit the best behavior with stable discharge specific capacities of 120 and 80 mAh g(-1) at 5 and 40 mA g(-1), respectively, in the range 2.0-3.9 V vs. Na(+)/Na. These outstanding properties make this material a promising candidate to construct viable and high-performance Na-based batteries.
RESUMO
Macroporous WO(3) films with inverted opal structure were synthesized by one-step procedure, which involves the self-assembly of the spherical templating agents and the simultaneous sol-gel condensation of the semiconductor alkoxide precursor. Transition metal doping, aimed to enhance the WO(3) electrical response, was carried out by including Cr(III) and Pt(IV) centers in the oxide matrix. It turned out that Cr remains as homogeneously dispersed Cr(III) centers inside the WO(3) host, while Pt undergoes reduction and aggregation to form nanoclusters located at the oxide surface. Upon interaction with NH(3), the electrical conductivity of transition metal doped-WO(3) increases, especially in the presence of Pt dopant, resulting in outstanding sensing properties (S = 110 ± 15 at T = 225 °C and [NH(3)] = 74 ppm). A mechanism was suggested to explain the excellent electrical response of Pt-doped films with respect to the Cr-doped ones. This associates the easy chemisorption of ammonia on the WO(3) nanocrystals, promoted by the inverted opal structure, with the catalytic action exerted by the surface Pt nanoclusters on the N-H bond dissociation. The overall results indicate that in Pt-doped WO(3) films the effects of the macroporosity positively combine with the electrical sensitization promoted by the metal nanoclusters, thus providing very lightweight materials which display high functionality even at relatively low temperatures. We expect that this synergistic effect can be exploited to realize other functional hierarchical metal oxide structures to be used as gas sensors or catalysts.
RESUMO
Ultrathin LiMn(2)O(4) nanowires with cubic spinel structure were synthesized by using a solvothermal reaction to produce α-MnO(2) nanowire followed by solid-state lithiation. LiMn(2)O(4) nanowires have diameters less than 10 nm and lengths of several micrometers. Galvanostatic battery testing showed that LiMn(2)O(4) nanowires deliver 100 and 78 mAh/g at very high rate (60C and 150C, respectively) in a larger potential window with very good capacity retention and outstanding structural stability. Such performances are due to both the favorable morphology and the high crystallinity of nanowires.
RESUMO
Friedreich ataxia (FRDA) is caused by the reduced expression of the mitochondrial protein frataxin (FXN) due to an intronic GAA trinucleotide repeat expansion in the FXN gene. Although FRDA has no cure and few treatment options, there is research dedicated to finding an agent that can curb disease progression and address symptoms as neurobehavioral deficits, muscle endurance, and heart contractile dysfunctions. Because oxidative stress and mitochondrial dysfunctions are implicated in FRDA, we demonstrated the systemic delivery of catalysts activity of gold cluster superstructures (Au8-pXs) to improve cell response to mitochondrial reactive oxygen species and thereby alleviate FRDA-related pathology in mesenchymal stem cells from patients with FRDA. We also found that systemic injection of Au8-pXs ameliorated motor function and cardiac contractility of YG8sR mouse model that recapitulates the FRDA phenotype. These effects were associated to long-term improvement of mitochondrial functions and antioxidant cell responses. We related these events to an increased expression of frataxin, which was sustained by reduced autophagy. Overall, these results encourage further optimization of Au8-pXs in experimental clinical strategies for the treatment of FRDA.
Assuntos
Ataxia de Friedreich , Animais , Modelos Animais de Doenças , Ouro , Humanos , Camundongos , Espécies Reativas de Oxigênio , Expansão das Repetições de TrinucleotídeosRESUMO
This paper presents single nanostructure devices as a powerful new diagnostic tool for batteries with LiMn(2)O(4) nanorod materials as an example. LiMn(2)O(4) and Al-doped LiMn(2)O(4) nanorods were synthesized by a two-step method that combines hydrothermal synthesis of beta-MnO(2) nanorods and a solid state reaction to convert them to LiMn(2)O(4) nanorods. lambda-MnO(2) nanorods were also prepared by acid treatment of LiMn(2)O(4) nanorods. The effect of electrolyte etching on these LiMn(2)O(4)-related nanorods is investigated by both SEM and single-nanorod transport measurement, and this is the first time that the transport properties of this material have been studied at the level of an individual single-crystalline particle. Experiments show that Al dopants reduce the dissolution of Mn(3+) ions significantly and make the LiAl(0.1)Mn(1.9)O(4) nanorods much more stable than LiMn(2)O(4) against electrolyte etching, which is reflected by the magnification of both size shrinkage and conductance decrease. These results correlate well with the better cycling performance of Al-doped LiMn(2)O(4) in our Li-ion battery tests: LiAl(0.1)Mn(1.9)O(4) nanorods achieve 96% capacity retention after 100 cycles at 1C rate at room temperature, and 80% at 60 degrees C, whereas LiMn(2)O(4) shows worse retention of 91% at room temperature, and 69% at 60 degrees C. Moreover, temperature-dependent I-V measurements indicate that the sharp electronic resistance increase due to charge ordering transition at 290 K does not appear in our LiMn(2)O(4) nanorod samples, suggesting good battery performance at low temperature.
Assuntos
Cristalização/métodos , Fontes de Energia Elétrica , Lítio/química , Manganês/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Nanotecnologia/instrumentação , Óxidos/química , Transferência de Energia , Desenho de Equipamento , Análise de Falha de Equipamento , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
The efficient production of energy from low-temperature heat sources (below 100 °C) would open the doors to the exploitation of a huge amount of heat sources such as solar, geothermal, and industrial waste heat. Thermal regenerable redox-flow batteries (TRBs) are flow batteries that store energy in concentration cells that can be recharged by distillation at temperature <100 °C, exploiting low-temperature heat sources. Using a single membrane cell setup and a suitable redox couple (LiBr/Br2 ), a TRB has been developed that is able to store a maximum volumetric energy of 25.5â Wh dm-3 , which can be delivered at a power density of 8â W m-2 . After discharging 30 % of the volumetric energy, a total heat-to-electrical energy conversion efficiency of 4 % is calculated, the highest value reported so far in harvesting of low-temperature heat.
RESUMO
Electrospinning is a powerful and versatile technique to produce efficient, specifically tailored and high-added value anodes for lithium ion batteries. Indeed, electrospun carbon nanofibers (CNFs) provide faster intercalation kinetics, shorter diffusion paths for ions/electrons transport and a larger number of lithium insertion sites with respect to commonly employed powder materials. With a view to further enhance battery performances, red phosphorous (RP) is considered one of the most promising materials that can be used in association with CNFs. RP/CNFs smart combinations can be exploited to overcome RP low conductivity and large volume expansion during cycling. In this context, we suggest a simple and cost effective double-step procedure to obtain high-capacity CNFs anodes and to enhance their electrochemical performances with the insertion of red phosphorous in the matrix. We propose a simple dropcasting method to confine micro- and nanosized RP particles within electrospun CNFs, thus obtaining a highly efficient, self-standing, binder-free anode. Phosphorous decorated carbon mats are characterized morphologically and tested in lithium ion batteries. Results obtained demonstrate that the reversible specific capacity and the rate capability of the obtained composite anodes is significantly improved with respect to the electrospun carbon mat alone.