RESUMO
Aqueous zinc-ion batteries hold attractive potential for large-scale energy storage devices owing to their prominent electrochemical performance and high security. Nevertheless, the applications of aqueous electrolytes have generated various challenges, including uncontrolled dendrite growth and parasitic reactions, thereby deteriorating the Zn anode's stability. Herein, inspired by the superior affinity between Zn2+ and amino acid chains in the zinc finger protein, a cost-effective and green glycine additive is incorporated into aqueous electrolytes to stabilize the Zn anode. As confirmed by experimental characterizations and theoretical calculations, the glycine additives can not only reorganize the solvation sheaths of hydrated Zn2+ via partial substitution of coordinated H2 O but also preferentially adsorb onto the Zn anode, thereby significantly restraining dendrite growth and interfacial side reactions. Accordingly, the Zn anode could realize a long lifespan of over 2000 h and enhanced reversibility (98.8%) in the glycine-containing electrolyte. Furthermore, the assembled Zn||α-MnO2 full cells with glycine-modified electrolyte also delivers substantial capacity retention (82.3% after 1000 cycles at 2 A g-1 ), showing promising application prospects. This innovative bio-inspired design concept would inject new vitality into the development of aqueous electrolytes.
RESUMO
Cuttlefish, a unique group of marine mollusks, produces an internal biomineralized shell, known as cuttlebone, which is an ultra-lightweight cellular structure (porosity, â¼93 vol%) used as the animal's hard buoyancy tank. Although cuttlebone is primarily composed of a brittle mineral, aragonite, the structure is highly damage tolerant and can withstand water pressure of about 20 atmospheres (atm) for the species Sepia officinalis Currently, our knowledge on the structural origins for cuttlebone's remarkable mechanical performance is limited. Combining quantitative three-dimensional (3D) structural characterization, four-dimensional (4D) mechanical analysis, digital image correlation, and parametric simulations, here we reveal that the characteristic chambered "wall-septa" microstructure of cuttlebone, drastically distinct from other natural or engineering cellular solids, allows for simultaneous high specific stiffness (8.4 MNâ m/kg) and energy absorption (4.4 kJ/kg) upon loading. We demonstrate that the vertical walls in the chambered cuttlebone microstructure have evolved an optimal waviness gradient, which leads to compression-dominant deformation and asymmetric wall fracture, accomplishing both high stiffness and high energy absorption. Moreover, the distribution of walls is found to reduce stress concentrations within the horizontal septa, facilitating a larger chamber crushing stress and a more significant densification. The design strategies revealed here can provide important lessons for the development of low-density, stiff, and damage-tolerant cellular ceramics.
Assuntos
Materiais Biomiméticos/química , Osso e Ossos/química , Sepia/química , Animais , Fenômenos Biomecânicos , Cerâmica/química , Desenho de Equipamento , Dureza , PorosidadeRESUMO
Learning from visual observation for efficient robotic manipulation is a hitherto significant challenge in Reinforcement Learning (RL). Although the collocation of RL policies and convolution neural network (CNN) visual encoder achieves high efficiency and success rate, the method general performance for multi-tasks is still limited to the efficacy of the encoder. Meanwhile, the increasing cost of the encoder optimization for general performance could debilitate the efficiency advantage of the original policy. Building on the attention mechanism, we design a robotic manipulation method that significantly improves the policy general performance among multitasks with the lite Transformer based visual encoder, unsupervised learning, and data augmentation. The encoder of our method could achieve the performance of the original Transformer with much less data, ensuring efficiency in the training process and intensifying the general multi-task performances. Furthermore, we experimentally demonstrate that the master view outperforms the other alternative third-person views in the general robotic manipulation tasks when combining the third-person and egocentric views to assimilate global and local visual information. After extensively experimenting with the tasks from the OpenAI Gym Fetch environment, especially in the Push task, our method succeeds in 92% versus baselines that of 65%, 78% for the CNN encoder, 81% for the ViT encoder, and with fewer training steps.
Assuntos
Procedimentos Cirúrgicos Robóticos , Robótica , Humanos , Fontes de Energia Elétrica , Redes Neurais de Computação , PolíticasRESUMO
In this paper, the practical application of a bio-inspired antenna for partial discharge (PD) detection in high voltage equipment was evaluated in order to validate the efficiency of using this technology for PD monitoring purposes. For this, PD measurements using the bio-inspired antenna were performed on operational 69 kV potential transformers (PT) in a real substation. After the field experiment, laboratory measurements using the IEC 60270 standard method and a bio-inspired antenna were performed, simultaneously, over the evaluated PT. The results obtained at the substation indicated suspicious frequencies of partial discharge activity in two out of three evaluated potential transformers, mainly for the frequencies of 461 MHz, 1366 MHz, 1550 MHz and 1960 MHz. During the laboratory tests, the presence of partial discharge activity over the suspicious potential transformers was confirmed with the detection of PD apparent charge levels above 20 pC. Finally, the frequency spectrum obtained from the PD signals detected by the bio-inspired antenna in the laboratory presented similar frequency values to those obtained during the practical application at the substation, making it a promising indicator for future defect classification studies using artificial intelligence.
RESUMO
Highly efficient biological ion channels with sophisticated transport characteristics in living organisms have inspired the design of artificial channels that are functionally comparable to those of their natural counterparts and applicable on a much larger scale. Self-assembly currently offers a facile approach for producing nanoconfined ion channels that exhibit smart ion-transport properties, including ion selectivity, gating, and rectification, and have shown great potential for various applications. In this Minireview, we give an overview of strategies for engineering bio-inspired self-assembled ion channels. We focus on emerging channel assemblies based on different fabrication processes such as supramolecular assembly, nanosystem-based fabrication, and polymer-based integration. The applications of these bio-inspired channels in the exploration of physiological events, detection of molecules/ions, ion separation, and energy conversion are concisely presented. Finally, future developments and challenges of this booming research field are proposed.
Assuntos
Nanoestruturas , Canais Iônicos/metabolismo , Transporte de Íons , Íons , PolímerosRESUMO
The flow through curved microvessels has more realistic applications in physiological transport phenomena especially in blood flow through capillary and microvessels. Motivated by the biomicrofluidics applications, a mathematical model is developed to describe the blood flow inside a curved microvessel driven by electroosmosis. In addition to this flow, the channel experiences electric double layer phenomenon due to zeta potential about -25â¯mV. Lubrication theory and Debye-Hückel approximation are employed to obtain an analytical solution for electric potential function. Computations of stream function, axial velocity, volume flow rate, and pressure rise are computed through low zeta potentials. The electroosmotic flow behaviour is governed by two dimensionless parameters: Helmholtz-Smoluchowski velocity and Debye-Hückel parameter. It is also examined that, how curvature affects the blood flow driven by the electroosmosis. Furthermore, the salient features of flow characteristics and trapping phenomena are presented. The results indicate that pressure gradient and wall shear stress reduce with increasing the curvature effects however the trapping is more with high curvature of the microvessel. The observations also indicate promising features of micromixer, micro-peristaltic pumps, and organ-on-a-chip devices. They may further be exploited in diagnosis/mixing of samples, and haemodialysis respectively.
Assuntos
Simulação por Computador , Eletro-Osmose , Microcirculação , Microvasos/fisiologia , Modelos Cardiovasculares , Velocidade do Fluxo Sanguíneo , Humanos , Microfluídica , Microvasos/anatomia & histologia , Fluxo Pulsátil , Fluxo Sanguíneo Regional , Fatores de TempoRESUMO
A new, bio-inspired printed monopole antenna (PMA) model is applied to monitor partial discharge (PD) activity in high voltage insulating systems. An optimized sensor was obtained by designing a PMA in accordance with the characteristics of the electromagnetic signal produced by PD. An ultra-wideband (UWB) antenna was obtained by applying the truncated ground plane technique. The patch geometry was bio-inspired by that of the Inga Marginata leaf, resulting in a significant reduction in size. To verify the operating frequency and gain of the PMA, measurements were carried out in an anechoic chamber. The results show that the antenna operating bandwidth covers most of the frequency range of PD occurrence. Moreover, the antenna presented a good sensitivity (mean gain of 3.63 dBi). The antenna performance was evaluated through comparative results with the standard IEC 60270 method. For this purpose, simultaneous tests were carried out in a PD generator arrangement, composed by an oil cell with point-to-plane electrode configurations. The developed PMA can be classified as an optimized sensor for PD detection and suitable for substation application, since it is able to measure PD radiated signals with half the voltage levels obtained from the IEC method and is immune to corona discharges.
RESUMO
The adaptation of dielectric windows as metamaterial superstrate over a bio-inspired Printed Monopole Antenna (PMA) was evaluated in order to improve the detection sensitivity of Ultra High Frequency (UHF) sensors designed for Partial Discharge (PD) measurement. For this purpose, rectangular and circular Split Ring Resonators (SRR) structures were designed and evaluated aiming to achieve a metamaterial superstrate that improves the characteristics of the bio-inspired PMA as the gain, bandwidth, and radiation pattern. Measurements of the PMA with metamaterial superstrate were carried out in an anechoic chamber and compared to the simulations performed. The results show that the metamaterial superstrate insertion did not impact the original operating bandwidth, covering most of the characteristic frequency range of PD activity. Moreover, this insertion resulted in a mean gain enhancement of 0.7 dBi regarding the reference PMA, resulting in an antenna with better sensitivity for PD detection (mean gain of 3.61 dBi). The PMA-metamaterial set PD detection sensitivity was evaluated through laboratory tests with a point-to-plane PD generator setup and in field with measurements from a 230 kV current transformer. The developed PMA-metamaterial set was able to detect, successfully, the activity of PD for both tests, being classified as an optimized sensor for PD detection through dielectric windows.
RESUMO
The field of wind energy stands at the forefront of sustainable and renewable energy solutions, playing a pivotal role in mitigating environmental concerns and addressing global energy demands. For many years, the convergence of nature-inspired solutions and wind energy has emerged as a promising avenue for advancing the efficiency and sustainability of wind energy systems. While several research endeavors have explored biomimetic principles in the context of wind turbine design and optimization, a comprehensive review encompassing this interdisciplinary field is notably absent. This review paper seeks to rectify this gap by cataloging and analyzing the multifaceted body of research that has harnessed biomimetic approaches within the realm of wind energy technology. By conducting an extensive survey of the existing literature, we consolidate and scrutinize the insights garnered from diverse biomimetic strategies into design and optimization in the wind energy domain.
RESUMO
Mass reduction of mechanical systems is a recurrent objective in engineering, which is often reached by removing material from its mechanical parts. However, this material removal leads to a decrease of mechanical performances for the parts, which must be minimized and controlled to avoid a potential system failure. To find a middle-ground between material removing and mechanical performances), material must be kept only in areas where it is necessary, for example using stress-driven material removal methods. These methods use the stress field to define the local material removal based on two local parameters: the local volume fraction vf and the structural anisotropy orientation ß. These methods may be based on different types of cellular structure patterns: lattice-based or bio-inspired. The long-term objective of this study is to improve the performance of stress-driven methods by using the most efficient pattern. For this purpose, this study investigates the influence of vf and ß on the mechanical stiffness of three planar cellular structures called Periodic Stress-Driven Material Removal (PSDMR) structures. The first, taken from the literature, is bio-inspired from bone and based on a square pattern. The second, developed in this study, is also bio-inspired from bone but based on a rectangular pattern. The third is a strut-based lattice pattern well documented in the literature for its isotropic behavior. These three patterns are compared in this study in terms of relative longitudinal stiffness, obtained through linear elastic compressive tests by finite element analysis. It is highlighted that each PSDMR pattern has a specific domain in which it performs better than the two others. In future works, these domains could be used in stress-driven material removal methods to select the most adequate pattern or a mix of them to improve the performances of parts.
RESUMO
Recent advances in passive flying systems inspired by wind-dispersed seeds contribute to increasing interest in their use for remote sensing applications across large spatial domains in the Lagrangian frame of reference. These concepts create possibilities for developing and studying structures with performance characteristics and operating mechanisms that lie beyond those found in nature. Here, we demonstrate a hybrid flier system, fabricated through a process of controlled buckling, to yield unusual geometries optimized for flight. Specifically, these constructs simultaneously exploit distinct fluid phenomena, including separated vortex rings from features that resemble those of dandelion seeds and the leading-edge vortices derived from behaviors of maple seeds. Advanced experimental measurements and computational simulations of the aerodynamics and induced flow physics of these hybrid fliers establish a concise, scalable analytical framework for understanding their flight mechanisms. Demonstrations with functional payloads in various forms, including bioresorbable, colorimetric, gas-sensing, and light-emitting platforms, illustrate examples with diverse capabilities in sensing and tracking.
RESUMO
This research presents a 10-year systematic review based on bibliometric analysis of the bio-inspired design of hard-bodied mobile robot mechatronic systems considering the anatomy of arthropods. These are the most diverse group of animals whose flexible biomechanics and adaptable morphology, thus, it can inspire robot development. Papers were reviewed from two international databases (Scopus and Web of Science) and one platform (Aerospace Research Central), then they were classified according to: Year of publication (January 2013 to April 2023), arthropod group, published journal, conference proceedings, editorial publisher, research teams, robot classification according to the name of arthropod, limb's locomotion support, number of legs/arms, number of legs/body segments, limb's degrees of freedom, mechanical actuation type, modular system, and environment adaptation. During the screening, more than 33 000 works were analyzed. Finally, a total of 174 studies (90 journal-type, 84 conference-type) were selected for in-depth study: Insecta-hexapods (53.8%), Arachnida-octopods (20.7%), Crustacea-decapods (16.1%), and Myriapoda-centipedes and millipedes (9.2%). The study reveals that the most active editorials are the Institute of Electrical and Electronics Engineers Inc., Springer, MDPI, and Elsevier, while the most influential researchers are located in the USA, China, Singapore, and Japan. Most works pertained to spiders, crabs, caterpillars, cockroaches, and centipedes. We conclude that 'arthrobotics' research, which merges arthropods and robotics, is constantly growing and includes a high number of relevant studies with findings that can inspire new methods to design biomechatronic systems.
Assuntos
Artrópodes , Bibliometria , Robótica , Animais , Robótica/instrumentação , Artrópodes/fisiologia , Artrópodes/anatomia & histologia , Biomimética/métodos , Desenho de Equipamento , Locomoção/fisiologia , Fenômenos BiomecânicosRESUMO
This study aims to support designers in developing transformative solutions in the engineering discipline using the Design-by-Analogy ideation method. Design-by-Analogy involves drawing inspiration from the source domain and applying it to the target domain. Based on the conceptual distance between the two domains, analogies are classified as biological-(natural), cross-(distant-engineering), and within-(near-engineering) domain analogies. Real-world scenarios involve designers selecting analogies after seeking them across multiple domains. These selected analogies significantly influence the produced designs. However, the selection criteria of the analogy domain are unexplored in design research. We address this gap by investigating: (a) the influence of analogy domains on their selection frequency; and (b) the relationship between the frequency of selecting analogies from specific domains and the novelty of designs. The experiment involved twenty-six teams of novice product designers, who solved design problems aided by one analogical source from each domain. The results showed that biological analogies were frequently selected. While biological-domain analogies significantly increased the novelty of designs compared to the within-domain ones; no significant difference was found between the biological- and cross-domain analogies, suggesting that middle-domain analogies can be as effective as far-domain ones. The findings can support technological innovation by aiding the development of analogy search databases.
RESUMO
Recent progress in additive manufacturing, also known as 3D printing, has offered several benefits, including high geometrical freedom and the ability to create bioinspired structures with intricate details. Mantis shrimp can scrape the shells of prey molluscs with its hammer-shaped stick, while beetles have highly adapted forewings that are lightweight, tough, and strong. This paper introduces a design approach for bioinspired lattice structures by mimicking the internal microstructures of a beetle's forewing, a mantis shrimp's shell, and a mantis shrimp's dactyl club, with improved mechanical properties. Finite element analysis (FEA) and experimental characterisation of 3D printed polylactic acid (PLA) samples with bioinspired structures were performed to determine their compression and impact properties. The results showed that designing a bioinspired lattice with unit cells parallel to the load direction improved quasi-static compressive performance, among other lattice structures. The gyroid honeycomb lattice design of the insect forewings and mantis shrimp dactyl clubs outperformed the gyroid honeycomb design of the mantis shrimp shell, with improvements in ultimate mechanical strength, Young's modulus, and drop weight impact. On the other hand, hybrid designs created by merging two different designs reduced bending deformation to control collapse during drop weight impact. This work holds promise for the development of bioinspired lattices employing designs with improved properties, which can have potential implications for lightweight high-performance applications.
RESUMO
A porous structure is essential for bone implants because it increases the bone ingrowth space and improves mechanical and biological properties. The biomimetically designed porous Voronoi scaffold can reconstruct the structure and function of cancellous bone; however, its comprehensive properties need to be investigated further. In this study, algorithms based on scaling factors were used to design the Voronoi scaffolds. Classic approaches, such as computer-aided design and the implicit surface method, have been used to design Diamond, Gyroid, and I-WP scaffolds as controls. All scaffolds were prepared by selective laser melting of titanium alloys and three-dimensional printing. Mechanical tests, finite element analysis, and in vitro and in vivo experiments were performed to investigate the biomechanical, cytologic, and osteogenic performance of the scaffolds, while computational fluid dynamics simulations were used to explore the underlying mechanisms. Diamond scaffolds have a better loading capacity, and the mechanical behaviors and fluid flow of Voronoi scaffolds are similar to those of the human trabecular bone. Cells showed more proliferation and distribution on the Diamond and Voronoi scaffolds and exhibited evident differentiation on Gyroid and Voronoi scaffolds. Bone formation was apparent on the inner part of the Gyroid, the outer part of the I-WP, and the entire Diamond and Voronoi scaffolds. The hydrodynamic properties and stimulus response of cells influenced by the porous structure account for the varied biological performance of the scaffolds. The Voronoi scaffolds with bionic mechanical behavior and an appropriate hydrodynamic response exhibit evident cell growth and osteogenesis, making them preferable for porous structural bone implants.
RESUMO
Combining different biological features exhibiting different functions is necessary to generate uncommon and unique multifunctional bio-inspired conceptual designs. Different biological features independently evolve characteristics to solve the same need/necessity. This phenomenon is called convergent evolution. Without parameters, selecting a suitable feature from those that exhibit the same function and have the same geometric relevance becomes quite difficult. This research investigates and identifies the parameters that have the potential to support choosing the suitable biological feature and to support the multifunctional design concept generation. In this paper, parameters are hypothesized by studying the mechanisms of tissue formation responsible for generating structural features in a biological system. These parameters are used in the Expandable Domain Integrated Design (xDID) ideation model to aid designers in choosing and combining suitable biological features for multifunctional concepts. A case study is presented to validate the effectiveness of the parameters in the selection process .
RESUMO
We introduce a method for the selection and processing of a biological model to derive an outline that provides morphometric information for a novel aerodynamic truck design. Because of the dynamic similarities, our new truck design will be inspired by biological shapes with a known high level of streamlining and low drag for operation near the seabed, i.e., the head of a trout, but other model organisms will also be used later. Demersal fish are chosen because they live near the bottom of rivers or the sea. Complementary to many biomimetic studies so far, we plan to concentrate on reshaping the outline of the fish's head and extend it to a 3D design for the tractor that, at the same time, fits within EU regulations and maintains the truck's normal use and stability. We intend to explore this biological model selection and formulization involving the following elements: (i) the reason for selecting fish as a biological model for a streamlined truck design; (ii) The choice of a fish model via a functional similarity method; (iii) biological shape formulization based on the morphometric information of models in (ii) outline pick-up, a reshaping step and a subsequent design process; (iv) modify the biomimetic designs and test utilizing CFD; (v) further discussion, outputs and results from the bio-inspired design process.
RESUMO
Environmental noise pollution is a growing challenge worldwide, necessitating effective sound absorption strategies to improve acoustic environments. Materials that draw inspiration from nature's structural design principles can provide enhanced functionalities. Wood exhibits an intricate multi-scale porous architecture that can dissipate acoustic energy. This study investigates a biomimetic sound-absorbing structure composed of hierarchical pores inspired by the vascular networks within wood cells. The perforated resonators induce complementary frequency responses and porous propagation effects for broadband attenuation. Samples were fabricated using 3D printing for systematic testing. The pore size, porosity, number of layers, and order of the layers were controlled as experimental variables. Acoustic impedance tube characterization demonstrated that optimizing these architectural parameters enables absorption coefficients approaching unity across a broad frequency range. The tuned multi-layer porous architectures outperformed single pore baselines, achieving up to a 25-35% increase in the average absorption. The bio-inspired coupled pore designs also exhibited a 95% broader working bandwidth. These enhancements result from the increased viscous losses and tailored impedance matching generated by the hierarchical porosity. This work elucidates structure-property guidelines for designing biomimetic acoustic metamaterials derived from the porous morphology of wood. The results show significant promise for leveraging such multi-scale cellular geometries in future materials and devices for noise control and dissipative engineering applications across diverse sectors.
RESUMO
Inspired by insects in nature, an increasing number of soft robots have been proposed to mimic their locomotion patterns. As a wireless actuation method, the magnetic actuation technique has been widely applied to drive soft magnetic robots for diverse applications. Although recent works on soft materials have stimulated the development of soft robots, it is challenging to achieve the efficient movement of soft robots for in vivo biomedical application. Inspired by centipede locomotion, a soft octopodal robot is designed in this paper. The robot is fabricated by mixing magnetic particles with silicone polymers, which is then magnetized by a specific magnetic field. The prototypes can be actuated by an external magnetic field (5-8 mT) produced by custom-made electromagnetic coils. Experimental results show that the soft robot can move at a high speed in the range of 0.536-1.604 mm/s on different surfaces, including paper, wood, and PMMA. This indicates that the soft robot can achieve comparable speeds to other robots, while being driven by a lower magnitude, resulting in energy savings. Furthermore, it achieves a high speed of 0.823 mm/s on the surface of a pig colon. The fine capabilities of the soft robot in terms of crossing uneven biological surfaces and carrying external loads are demonstrated. The results indicate that the reported soft robot exhibits promising applications in the biomedical field.
RESUMO
Biomimetics holds the promise to contribute to sustainability in several ways. However, it remains unclear how the two broad concepts and research fields are connected. This article presents a literature overview on biomimetic sustainable developments and research. It is shown that there is an increasing trend in publications dealing with various topics and that the research takes place worldwide. The biological models studied in biomimetic sustainable developments are mostly sub-elements of biological systems on a molecular level and lead to eco-friendly, resource and energy-efficient applications. This article indicates that biomimetics is further integrating sustainability to contribute to real problems in this context.