Recent trends in application of nanomaterials for the development of electrochemical microRNA biosensors.

The biology of the late twentieth century was marked by the discovery in 1993 of a new class of small non-coding ribonucleic acids (RNAs) which play major roles in regulating the translation and degradation of messenger RNAs. These small RNAs (18-25 nucleotides), called microRNAs (miRNAs), are implied in several biological processes such as differentiation, metabolic homeostasis, or cellular apoptosis and proliferation. The discovery in 2008 that the presence of miRNAs in body fluids could be correlated with cancer (prostate, breast, colon, lung, etc.) or other diseases (diabetes, heart diseases, etc.) has made them new key players as biomarkers. Therefore, miRNA detection is of considerable significance in both disease diagnosis and in the study of miRNA function. Until these days, more than 1200 miRNAs have been identified. However, traditional methods developed for conventional DNA does not apply satisfactorily for miRNA, in particular due to the low expression level of these miRNA in biofluids, and because they are very short strands. Electrochemical biosensors can provide this sensitivity and also offer the advantages of mass fabrication, low-cost, and potential decentralized analysis, which has wide application for microRNAs sensing, with many promising results already reported. The present review summarizes some newly developed electrochemical miRNA detection methods.

Recent Advances in Electrochemical and Optical Sensing of Dopamine.

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Cytokine and Cancer Biomarkers Detection: The Dawn of Electrochemical Paper-Based Biosensor.

Although the established ELISA-based sensing platforms have many benefits, the importance of cytokine and cancer biomarkers detection for point-of-care diagnostics has propelled the search for more specific, sensitive, simple, accessible, yet economical sensor. Paper-based biosensor holds promise for future in-situ applications and can provide rapid analysis and data without the need to conduct in a laboratory. Electrochemical detection plays a vital role in interpreting results obtained from qualitative assessment to quantitative determination. In this review, various factors affecting the design of an electrochemical paper-based biosensor are highlighted and discussed in depth. Different detection methods, along with the latest development in utilizing them in cytokine and cancer biomarkers detection, are reviewed. Lastly, the fabrication of portable electrochemical paper-based biosensor is ideal in deliberating positive societal implications in developing countries with limited resources and accessibility to healthcare services.

Application of Ionic Liquids in Electrochemistry-Recent Advances.

In this review, the roles of room temperature ionic liquids (RTILs) and RTIL based solvent systems as proposed alternatives for conventional organic electrolyte solutions are described. Ionic liquids are introduced as well as the relevant properties for their use in electrochemistry (reduction of ohmic losses), such as diffusive molecular motion and ionic conductivity. We have restricted ourselves to provide a survey on the latest, most representative developments and progress made in the use of ionic liquids as electrolytes, in particular achieved by the cyclic voltammetry technique. Thus, the present review comprises literature from 2015 onward covering the different aspects of RTILs, from the knowledge of these media to the use of their properties for electrochemical processes. Out of the scope of this review are heat transfer applications, medical or biological applications, and multiphasic reactions.

Electrochemical Reduction of Carbon Dioxide to Value-Added Products: The Electrocatalyst and Microbial Electrosynthesis.

The electrochemical reduction of carbon dioxide (CO2 ) to value-added products obtains great attention and investigation worldwide in recent years. The commercialization of this green process relies on the progress of relating high-performance electrocatalysts and their feasibility with proper reactor design. The microbial electrosynthesis (MES) is an alternative route to reduce CO2 with electroactive bio-film electrode as catalyst. This review presents the research status and development of cathode catalysts, particularly focusing on the active sites and development tendency, for highly efficient electrochemical reduction CO2 from personal viewpoint. Some of our results are also presented to exhibit contributions. MES shows a similar process to the typical electrochemical reduction of CO2 . Their combination is an important trend, and the future research in this field is full of challenges and opportunities.

Nanomaterial based electrochemical sensing of the biomarker serotonin: a comprehensive review.

This review (with 131 references) summarizes the progress made in the past years in the field of nanomaterial based sensing of serotonin (5-HT). An introduction summarizes the significant role of 5-HT as a biomarker for several major diseases, methods for its determination and the various kinds of nanomaterials for use in electrochemical sensing process relies principally on a precise choice of electrodes. The next main section covers nanomaterial based methods for sensing 5-HT, with subsections on electrodes modified with carbon nanotubes, graphene related materials, gold nanomaterials, and by other nanomaterials. A concluding section discusses future perspectives and current challenges of 5-HT determination. Graphical abstract Conceptual design of electrochemical sensing process of the biomarker serotonin by using nanomaterials and the role of 5-HTas biomarker in the body from preclinical to clincal.

Dengue virus: a review on advances in detection and trends - from conventional methods to novel biosensors.

Dengue virus is an important arbovirus infection which transmitted by the Aedes female mosquitoes. The attempt to control and early detection of this infection is a global public health issue at present. Because of the clinical importance of its detection, the main focus of this review is on all of the methods that can offer the new diagnosis strategies. The advantages and disadvantages of reported methods have been discussed comprehensively from different aspects like biomarkers type, sensitivity, accuracy, rate of detection, possibility of commercialization, availability, limit of detection, linear range, simplicity, mechanism of detection, and ability of usage for clinical applications. The optical, electrochemical, microfluidic, enzyme linked immunosorbent assay (ELISA), and smartphone-based biosensors are the main approaches which developed for detection of different biomarkers and serotypes of Dengue virus. Future efforts in miniaturization of these methods open the horizons for development of commercial biosensors for early-diagnosis of Dengue virus infection. Graphical abstract Transmission of Dengue virus by the biting of an Aedes aegypti mosquito, the symptoms of Dengue hemorrhagic fever and the structure of Dengue virus and application of biosensors for its detection.

Functional Sensing Interfaces of PEDOT:PSS Organic Electrochemical Transistors for Chemical and Biological Sensors: A Mini Review.

Organic electrochemical transistors (OECTs) are promising devices for applications in in vitro and in vivo measurements. OECTs have two important sensing interfaces for signal monitoring: One is the gate electrode surface; the other is the channel surface. This mini review introduced the new developments in chemical and biological detection of the two sensing interfaces. Specific focus was given on the modification technological approaches of the gate or channel surface. In particular, some unique strategies and surface designs aiming to facilitate signal-transduction and amplification were discussed. Several perspectives and current challenges of OECTs development were also briefly summarized.

Latest Trends in Electrochemical Sensors for Neurotransmitters: A Review.

Neurotransmitters are endogenous chemical messengers which play an important role in many of the brain functions, abnormal levels being correlated with physical, psychotic and neurodegenerative diseases such as Alzheimer's, Parkinson's, and Huntington's disease. Therefore, their sensitive and robust detection is of great clinical significance. Electrochemical methods have been intensively used in the last decades for neurotransmitter detection, outclassing more complicated analytical techniques such as conventional spectrophotometry, chromatography, fluorescence, flow injection, and capillary electrophoresis. In this manuscript, the most successful and promising electrochemical enzyme-free and enzymatic sensors for neurotransmitter detection are reviewed. Focusing on the activity of worldwide researchers mainly during the last ten years (2010-2019), without pretending to be exhaustive, we present an overview of the progress made in sensing strategies during this time. Particular emphasis is placed on nanostructured-based sensors, which show a substantial improvement of the analytical performances. This review also examines the progress made in biosensors for neurotransmitter measurements in vitro, in vivo and ex vivo.

An electrochemical sensor based on cellulose nanocrystal for the enantioselective discrimination of chiral amino acids.

A novel electrochemical sensor based on 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanocrystals (TOCNCs) and l-cystines (l-Cys) modified Au electrode (TOCNC/l-Cys/Au) has been fabricated for detection and discrimination of the enantiomers of phenylalanine (Phe), leucine (Leu), and valine (Val). The three amino acids are in connection with metabolism diseases. The TOCNC/l-Cys/Au electrode exhibited obvious peak current difference for the amino acid enantiomers by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The TOCNCs on the electrode surface expressed different interactions with d- and l-amino acids, so the electrochemical recognitions of the three amino acid enantiomers were achieved. TOCNCs were characterized by Fourier transform infrared (FT-IR) and scanning electron microscopy (SEM). The modified electrodes were characterized by SEM and electrochemical techniques. According to DPV, peak currents of the two enantiomers decreased linearly with their concentrations. Furthermore, satisfactory results were obtained when this electrode was applied to measure the d- and l-Phe mixture. The experimental results show that TOCNCs are suitable material for chiral sensor. The contrast of serum sample of healthy people and patients with type 2 diabetes also was proposed, and significant difference was exhibited on the modified electrode. This work is significant for the screening, diagnosis, and treatment of multiple metabolic diseases.

Electrochemical detection of Pseudomonas in wound exudate samples from patients with chronic wounds.

In clinical practice, point-of-care diagnostic testing has progressed rapidly in the last decade. For the field of wound care, there is a compelling need to develop rapid alternatives for bacterial identification in the clinical setting, where it generally takes over 24 hours to receive a positive identification. Even new molecular and biochemical identification methods require an initial incubation period of several hours to obtain a sufficient number of cells prior to performing the analysis. Here we report the use of an inexpensive, disposable electrochemical sensor to detect pyocyanin, a unique, redox-active quorum sensing molecule released by Pseudomonas aeruginosa, in wound fluid from patients with chronic wounds enrolled in the WE-HEAL Study. By measuring the metabolite excreted by the cells, this electrochemical detection strategy eliminates sample preparation, takes less than a minute to complete, and requires only 7.5 µL of sample to complete the analysis. The electrochemical results were compared against 16S rRNA profiling using 454 pyrosequencing. Blind identification yielded 9 correct matches, 2 false negatives, and 3 false positives giving a sensitivity of 71% and specificity of 57% for detection of Pseudomonas. Ongoing enhancement and development of this approach with a view to develop a rapid point-of-care diagnostic tool is planned.

Recent advances of electrochemical mass spectrometry.

This review article surveys some recent developments of electrochemistry (EC) in combination with mass spectrometry (MS) including instrumentation and bioanalytical applications.

Nanoparticle-based immunoassays in the biomedical field.

Recent research has looked to develop innovative, powerful and novel biofunctionalized nanoparticles, controlling and tailoring their properties in a very predictable manner to meet the needs of clinic immunoassays in the biomedical field. This minireview briefly summarizes recent advances covering the last 3 years, exploiting nanoparticle-based electrochemical, optical, mass-sensitive, colorimetric and immunodipstick assays. The enormous signal enhancement associated with the use of nanoparticles and formation of nanoparticle-antibody-antigen assemblies provide the basis for sensitive detection of disease-related proteins or biomarkers. Rather than being exhaustive, this minireview focuses on selected examples to illustrate novel concepts and promising applications. Finally, a small amount of speculation of possible future developments in nanoparticle-based immunoassays is provided.

Breakthrough in P450 bioelectrochemistry and future perspectives.

Improving the electrochemical performance of cytochrome P450 enzymes is highly desirable due to their versatility in the recognition of different biological and xenobiotic compounds. The task poses an exciting challenge because it leads not only to the acquisition of fundamental knowledge on the redox properties of these enzymes, but it also opens opportunities for technological and commercial applications. Interfacing these enzymes to electrode surfaces and electrochemically driving their catalytic cycle has proven to be very difficult. Initial attempts made by several groups included the direct immobilisation of these enzymes on electrode surfaces and omission of their redox partners for simplification of their electron transfer pathway. The data obtained in these cases generally resulted in a high heterogeneous electron transfer rate but without success in terms of detectable substrate turnover. The breakthrough in electrocatalysis has been made when both the electrode and the enzyme have been engineered, in some cases mimicking the natural environment of the microsomal enzymes and the inclusion of their electron transfer partners. This paper reviews and discusses the recent literature on this subject, and highlights the different approaches that have led to an unprecedented advancement of this area of research.

Recent advances in electrochemical sensing for hydrogen peroxide: a review.

Due to the significance of hydrogen peroxide (H(2)O(2)) in biological systems and its practical applications, the development of efficient electrochemical H(2)O(2) sensors holds a special attraction for researchers. Various materials such as Prussian blue (PB), heme proteins, carbon nanotubes (CNTs) and transition metals have been applied to the construction of H(2)O(2) sensors. In this article, the electrocatalytic H(2)O(2) determinations are mainly focused on because they can provide a superior sensing performance over non-electrocatalytic ones. The synergetic effect between nanotechnology and electrochemical H(2)O(2) determination is also highlighted in various aspects. In addition, some recent progress for in vivo H(2)O(2) measurements is also presented. Finally, the future prospects for more efficient H(2)O(2) sensing are discussed.

Recent Advances in Electrochemical Biosensors for the Detection of Salmonellosis: Current Prospective and Challenges.

Salmonellosis is a major cause of foodborne infections, caused by Salmonella, posing a major health risk. It possesses the ability to infiltrate the food supply chain at any point throughout the manufacturing, distribution, processing or quality control process. Salmonella infection has increased severely and requires effective and efficient methods for early monitoring and detection. Traditional methods, such as real-time polymerase chain reaction and culture plate, consume a lot of time and are labor-intensive. Therefore, new quick detection methods for on-field applications are urgently needed. Biosensors provide consumer-friendly approaches for quick on-field diagnoses. In the last few years, there has been a surge in research into the creation of reliable and advanced electrochemical sensors for the detection of Salmonella strains in food samples. Electrochemical sensors provide extensive accuracy and reproducible results. Herein, we present a comprehensive overview of electrochemical sensors for the detection of Salmonella by focusing on various mechanisms of electrochemical transducer. Further, we explain new-generation biosensors (microfluidics, CRISPR- and IOT-based) for point-of care applications. This review also highlights the limitations of developing biosensors in Salmonella detection and future possibilities.

New directions in screen printed electroanalytical sensors: an overview of recent developments.

Screen printing is widely used to fabricate disposable and economical electrochemical sensors and has helped us to establish the route from 'lab-to-market' for a plethora of sensors. We overview recent developments in the field where screen printed electrochemical sensors are utilised. Starting with their fundamental understanding, through to highlighting new developments in bulk metal and mediator modified electrodes, as well as novel advantageous electrode designs, we demonstrate the wide and diverse range of applications that sensors based on this fabrication approach have achieved.

Trends in computational simulations of electrochemical processes under hydrodynamic flow in microchannels.

Computational modeling and theoretical simulations have recently become important tools for the development, characterization, and validation of microfluidic devices. The recent proliferation of commercial user-friendly software has allowed researchers in the microfluidics community, who might not be familiar with computer programming or fluid mechanics, to acquire important information on microsystems used for sensors, velocimetry, detection for microchannel separations, and microfluidic fuel cells. We discuss the most popular computational technique for modeling these systems--the finite element method--and how it can be applied to model electrochemical processes coupled with hydrodynamic flow in microchannels. Furthermore, some of the limitations and challenges of these computational models are also discussed.

The potential of microelectrode arrays and microelectronics for biomedical research and diagnostics.

Planar microelectrode arrays (MEAs) are devices that can be used in biomedical and basic in vitro research to provide extracellular electrophysiological information about biological systems at high spatial and temporal resolution. Complementary metal oxide semiconductor (CMOS) is a technology with which MEAs can be produced on a microscale featuring high spatial resolution and excellent signal-to-noise characteristics. CMOS MEAs are specialized for the analysis of complete electrogenic cellular networks at the cellular or subcellular level in dissociated cultures, organotypic cultures, and acute tissue slices; they can also function as biosensors to detect biochemical events. Models of disease or the response of cellular networks to pharmacological compounds can be studied in vitro, allowing one to investigate pathologies, such as cardiac arrhythmias, memory impairment due to Alzheimer's disease, or vision impairment caused by ganglion cell degeneration in the retina.

Impedimetric Aptamer-Based Biosensors: Principles and Techniques.

Aptamers are a specific class of ligands with high affinities comparable to antibodies, which are selected and synthesized in vitro. In combination with impedance spectroscopy as sensitive measurement method, we gain a class of biosensors with high potential for handheld devices and point-of-care tests. In this review, we report on recent advances in aptamer-based impedimetric biosensors. Besides giving a short summary of electrochemical measurement techniques, the most exciting innovative developments of detection strategies in the last decades are reviewed. Finally, important criteria for the comparison of aptamer-based biosensors are discussed.