From urban municipalities to polar bioremediation: the characterisation and contribution of biogenic minerals for water treatment.

Minerals of biological origin have shown significant potential for the separation of contaminants from water worldwide. This study details the contribution of biologically derived minerals to water treatment operations, with a focus on filtration media from urban municipalities and remote cold regions. The results support biofilm-embedded iron and manganese to be the building blocks of biogenic mineral development on activated carbon and nutrient-amended zeolites. The presence of similar iron and manganese oxidising bacterial species across all filter media supports the analogous morphologies of biogenic minerals between sites and suggests that biological water treatment processes may be feasible across a range of climates. This is the first time the stages of biogenic mineral formation have been aligned with comprehensive imaging of the biofilm community and bacterial identification; especially with respect to cold regions. Where biogenic mineral formation occurs on filter media, the potential exists for enhanced adsorption for a range of organic and inorganic contaminants and improved longevity of filter media beyond the adsorption or exchange capacities of the raw material.

Application of controlled nutrient release to permeable reactive barriers.

The application of controlled release nutrient (CRN) materials to permeable reactive barriers to promote biodegradation of petroleum hydrocarbons in groundwater was investigated. The longevity of release, influence of flow velocity and petroleum hydrocarbon concentration on nutrient release was assessed using soluble and ion exchange CRN materials; namely Polyon™ and Zeopro™. Both CRN materials, assessed at 4 °C and 23 °C, demonstrated continuing release of nitrogen, phosphorus and potassium (N-P-K) at 3500 bed volumes passing, with longer timeframes of N-P-K release at 4 °C. Zeopro™-activated carbon mixtures demonstrated depletion of N-P-K prior to 3500 bed volumes passing. Increased flow velocity was shown to lower nutrient concentrations in Polyon™ flow cells while nutrient release from Zeopro™ was largely unchanged. The presence of petroleum hydrocarbons, at 1.08 mmol/L and 3.25 mmol/L toluene, were not shown to alter nutrient release from Polyon™ and Zeopro™ across 14 days. These findings suggest that Polyon™ and Zeopro™ may be suitable CRN materials for application to PRBs in low nutrient environments.

Surface Engineering of Polypropylene Membranes with Carbonic Anhydrase-Loaded Mesoporous Silica Nanoparticles for Improved Carbon Dioxide Hydration.

Carbonic anhydrase (CA) is a native enzyme that facilitates the hydration of carbon dioxide into bicarbonate ions. This study reports the fabrication of thin films of active CA enzyme onto a porous membrane substrate using layer-by-layer (LbL) assembly. Deposition of multilayer films consisting of polyelectrolytes and CA was monitored by quartz crystal microgravimetry, while the enzymatic activity was assayed according to the rates of p-nitrophenylacetate (p-NPA) hydrolysis and CO2 hydration. The fabrication of the films onto a nonporous glass substrate showed CO2 hydration rates of 0.52 ± 0.09 µmol cm(-2) min(-1) per layer of bovine CA and 2.6 ± 0.7 µmol cm(-2) min(-1) per layer of a thermostable microbial CA. The fabrication of a multilayer film containing the microbial CA on a porous polypropylene membrane increased the hydration rate to 5.3 ± 0.8 µmol cm(-2) min(-1) per layer of microbial CA. The addition of mesoporous silica nanoparticles as a film layer prior to enzyme adsorption was found to increase the activity on the polypropylene membranes even further to a rate of 19 ± 4 µmol cm(-2) min(-1) per layer of microbial CA. The LbL treatment of these membranes increased the mass transfer resistance of the membrane but decreased the likelihood of membrane pore wetting. These results have potential application in the absorption of carbon dioxide from combustion flue gases into aqueous solvents using gas-liquid membrane contactors.

Energy and exergy analyses of an integrated gasification combined cycle power plant with CO2 capture using hot potassium carbonate solvent.

Energy and exergy analyses were studied for an integrated gasification combined cycle (IGCC) power plant with CO2 capture using hot potassium carbonate solvent. The study focused on the combined impact of the CO conversion ratio in the water gas shift (WGS) unit and CO2 recovery rate on component exergy destruction, plant efficiency, and energy penalty for CO2 capture. A theoretical limit for the minimal efficiency penalty for CO2 capture was also provided. It was found that total plant exergy destruction increased almost linearly with CO2 recovery rate and CO conversion ratio at low CO conversion ratios, but the exergy destruction from the WGS unit and the whole plant increased sharply when the CO conversion ratio was higher than 98.5% at the design WGS conditions, leading to a significant decrease in plant efficiency and increase in efficiency penalty for CO2 capture. When carbon capture rate was over around 70%, via a combination of around 100% CO2 recovery rate and lower CO conversion ratios, the efficiency penalty for CO2 capture was reduced. The minimal efficiency penalty for CO2 capture was estimated to be around 5.0 percentage points at design conditions in an IGCC plant with 90% carbon capture. Unlike the traditional aim of 100% CO conversion, it was recommended that extremely high CO conversion ratios should not be considered in order to decrease the energy penalty for CO2 capture and increase plant efficiency.

Next-generation enhanced-efficiency fertilizers for sustained food security.

Nitrogen losses in agricultural systems can be reduced through enhanced-efficiency fertilizers (EEFs), which control the physicochemical release from fertilizers and biological nitrogen transformations in soils. The adoption of EEFs by farmers requires evidence of consistent performance across soils, crops and climates, paired with information on the economic advantages. Here we show that the benefits of EEFs due to avoided social costs of nitrogen pollution considerably outweigh their costs-and must be incorporated in fertilizer policies. We outline new approaches to the design of EEFs using enzyme inhibitors with modifiable chemical structures and engineered, biodegradable coatings that respond to plant rhizosphere signalling molecules.

The performance of ammonium exchanged zeolite for the biodegradation of petroleum hydrocarbons migrating in soil water.

Nitrogen deficiency has been identified as the main inhibiting factor for biodegradation of petroleum hydrocarbons in low nutrient environments. This study examines the performance of ammonium exchanged zeolite to enhance biodegradation of petroleum hydrocarbons migrating in soil water within laboratory scale flow cells. Biofilm formation and biodegradation were accelerated by the exchange of cations in soil water with ammonium in the pores of the exchanged zeolite when compared with natural zeolite flow cells. These results have implications for sequenced permeable reactive barrier design and the longevity of media performance within such barriers at petroleum hydrocarbon contaminated sites deficient in essential soil nutrients.

The optimisation of ultrasonic cleaning procedures for dairy fouled ultrafiltration membranes.

Ultrafiltration (UF) of whey is a major membrane based process in the dairy industry. However, commercialization of this application has been limited by membrane fouling, which has a detrimental influence on the permeation rate. There are a number of different chemical and physical cleaning methods currently used for cleaning a fouled membrane. It has been suggested that the cleaning frequency and the severity of such cleaning procedures control the membrane lifetime. The development of an optimal cleaning strategy should therefore have a direct implication on the process economics. Recently, the use of ultrasound has attracted considerable interest as an alternative approach to the conventional methods. In the present study, we have studied the ultrasonic cleaning of polysulfone ultrafiltration membranes fouled with dairy whey solutions. The effects of a number of cleaning process parameters have been examined in the presence of ultrasound and results compared with the conventional operation. Experiments were conducted using a small single sheet membrane unit that was immersed totally within an ultrasonic bath. Results show that ultrasonic cleaning improves the cleaning efficiency under all experimental conditions. The ultrasonic effect is more significant in the absence of surfactant, but is less influenced by temperature and transmembrane pressure. Our results suggest that the ultrasonic energy acts primarily by increasing the turbulence within the cleaning solution.

Ultrathin chitosan-poly(ethylene glycol) hydrogel films for corneal tissue engineering.

Due to the high demand for donor corneas and their low supply, autologous corneal endothelial cell (CEC) culture and transplantation for treatment of corneal endothelial dysfunction would be highly desirable. Many studies have shown the possibility of culturing CECs in vitro, but lack potential robust substrates for transplantation into the cornea. In this study, we investigate the properties of novel ultrathin chitosan-poly(ethylene glycol) (PEG) hydrogel films (CPHFs) for corneal tissue engineering applications. Cross-linking of chitosan films with diepoxy-PEG and cystamine was employed to prepare ~50 µm (hydrated) hydrogel films. Through variation of the PEG content (1.5-5.9 wt.%) it was possible to tailor the CPHFs to have tensile strains and ultimate stresses identical to or greater than those of human corneal tissue while retaining similar tensile moduli. Light transmission measurements in the visible spectrum (400-700 nm) revealed that the films were >95% optically transparent, above that of the human cornea (maximum ~90%), whilst in vitro degradation studies with lysozyme revealed that the CPHFs maintained the biodegradable characteristics of chitosan. Cell culture studies demonstrated the ability of the CPHFs to support the attachment and proliferation of sheep CECs. Ex vivo surgical trials on ovine eyes demonstrated that the CPHFs displayed excellent characteristics for physical manipulation and implantation purposes. The ultrathin CPHFs display desirable mechanical, optical and degradation properties whilst allowing attachment and proliferation of ovine CECs, and as such are attractive candidates for the regeneration and transplantation of CECs, as well as other corneal tissue engineering applications.

Effect of the substrate concentration and water activity on the yield and rate of the transfer reaction of ß-galactosidase from Bacillus circulans.

Prebiotic galactosyl oligosaccharides (GOS) are produced from lactose by the enzyme ß-galactosidase. It is widely reported that the highest GOS levels are achieved when the initial lactose concentration is as high as possible; however, little evidence has been presented to explain this phenomenon. Using a system composed of the commercial ß-galactosidase derived from Bacillus circulans known as Biolacta FN5, lactose and sucrose, the relative contribution of water activity, and substrate availability were assessed. Oligosaccharide levels did not appear to be affected by changes in water activity between 1.0 and 0.77 at a constant lactose concentration. The maximum oligosaccharide concentration increased at higher initial concentrations of lactose and sucrose, while initial reaction rates for transfer increased but remained constant for hydrolysis. This suggests that the high oligosaccharide levels achieved at the raised initial saccharide concentration are due to increases in reactions that form oligosaccharides rather than decreases in concurrent reactions, which degrade oligosaccharides. There were different effects from changing the initial concentration of lactose compared to sucrose, suggesting that the ability of lactose to act as a donor saccharide may be more important for increasing maximum oligosaccharide concentrations than the combined ability of both saccharides to act as galactosyl acceptors.

Facile pretreatment of Bacillus circulans beta-galactosidase increases the yield of galactosyl oligosaccharides in milk and lactose reaction systems.

The commercially available preparation of beta-galactosidase from Bacillus circulans , known as Biolacta FN5, has been extensively used in the production of prebiotic galactooligosaccharides (GOS). This study focuses on characterizing the production of GOS in two reaction systems: 10% lactose (w/v) in buffer and skim milk. Analysis of the temperature dependence of the GOS yield along with the relative rates of GOS synthesis and degradation leads to the finding that GOS degradation activity was selectively decreased in Biolacta FN5 above 40 degrees C. Facile heat treatment of Biolacta FN5 solution prior to use allowed for GOS yields to be significantly increased in both reaction systems.

Effect of surfactants on the kinetics of nickel(II) extraction by 2-hydroxy-5-nonylacetophenone oxime (LIX 84) in an n-heptane/water system.

The initial reaction rates of the extraction of nickel(II) by 2-hydroxy-5-nonylacetophenone oxime (HNAPO) in a two-phase oil/water system was measured using a total internal reflectance static transfer cell. A two-step reaction mechanism between nickel(II) and HNAPO was found to satisfactorily explain the observed initial reaction rate (R(int)). The addition of neutral surfactants, nonionic octaethylene glycol mono-n-dodecyl ether and zwitterionic n-dodecyldimethyl-3-ammonio-1-propanesulfonate, decreased R(int), which could be accounted for with a competitive surface adsorption model. The presence of the anionic surfactant sodium dodecyl sulfate accelerated and then decelerated R(int), while the cationic surfactant dodecyltrimethylammonium chloride caused a decrease. The effects of these charged surfactants were accounted for using a combination of a competitive surface adsorption model and the Boltzmann distribution of charged species.

An experimental and theoretical study of competitive adsorption at the n-heptane/water interface.

A model to calculate the interfacial concentration of competing surface active species in a two-phase oil/water system was developed. To enable the calculation of the surface excess of 2-hydroxy-5-nonylacetophenone oxime (HNAPO, active ingredient of LIX 84) in the presence of surfactants competing for interfacial area, an interfacial adsorption competition model was derived for noninteracting surface active species in a n-heptane/aqueous system, assuming ideal enthalpy and entropy of mixing. The model was found to be valid for HNAPO in the presence of sodium dodecyl sulfate (SDS) or dodecyldimethyl(3-sulfopropyl)ammonium (DDSA). In the case of dodecyltrimethylammonium chloride (DTAC) or octa(ethylene glycol) mono-n-dodecyl ether (C12E8) as the competing surfactants with HNAPO, the predicted surface excess values from the model fit less favorably. The difference was shown to not be due to nonideal entropy of mixing.