Exploring albumin-sulfonephthalein dyes interactions by a chemometric-assisted and multi-technique equilibria analysis in solution.

Albumin is undoubtedly the most studied protein thanks to its widespread diffusion and biochemistry; despite its binding ability towards different dyes, provoking dye's colour change, has been exploited for decades for quantification purposes, the joint effect of working pH, ionic strength, and dye's pKa still remains only sporadically discussed. In the present study, the interaction of Bovine Serum Albumin (BSA) with five dyes belonging to the sulfonephthalein group, Bromophenol Blue (BPB, pKa = 3.75), Bromocresol Green (BCG, pKa = 4.42), Chlorophenol Red (CPR, pKa = 5.74), Bromocresol Purple (BCP, pKa = 6.05) and Bromothymol Blue (BTB, pKa = 6.72), is investigated at four working pH values (3.5, 6.0, 7.5 and 9.0) and two ionic strength conditions by UV-Vis spectroscopy. Principal Component Analysis is then applied to rationalize dye behavior upon BSA addition at each pH value and to summarize the protein effect on dyes' spectral features, identifying three general behaviors. The most relevant systems are then submitted to further characterization involving a solution equilibria study aimed at determining conditional binding constants for the selected DSA-dye adducts and fluorescence, CD, and 1H NMR spectroscopy to evaluate the binding effect on the species involved.

Exploiting Principal Component Analysis (PCA) to reveal temperature, buffer and metal ions' role in neuromelanin (NM) synthesis by dopamine (DA) oxidative polymerization.

Neuromelanin (NM) plays a well-established role in neurological disorders pathogenesis; the mechanism of action is still discussed and the investigations in this field are limited by NM's complex and heterogeneous composition, insolubility, and low availability from human brains. An alternative can be offered by synthetic NM obtained from dopamine (DA) oxidative polymerization; however, a deep knowledge of the influence of both physicochemical parameters (T, pH, ionic strength) and other compounds in the reaction media (buffer, metal ions, other catecholamines) on DA oxidation process and, consequently, on synthetic NM features is mandatory to develop reliable NM preparation methodologies. To partially fulfill this aim, the present work focuses on defining the role of temperature, buffer and metal ions on both DA oxidation rate and DA oligomer size. DA oxidation in the specific conditions is monitored by UV-Vis spectroscopy and Principal Component Analysis (PCA) is run either on the raw spectra to model the background absorption increase, related to small DA oligomers formation, or on their first derivative to rationalize DA consumption. After having studied three case studies, 3-Way PCA is applied to directly evaluate the effect of temperature and buffer type on DA oxidation in the presence of different metal ions. Despite the proof-of-concept nature of the work and the number of compounds still to be included in the investigation, the preliminary results and the possibility to further expand the chemometric approach represent an interesting contribution to the field of in vitro simulation of NM synthesis.

A new cysteamine-copper chemically modified screen-printed gold electrode for glyphosate determination.

A chemically modified screen-printed gold electrode has been prepared by covering the electrode surface with a cysteamine-copper self-assembled monolayer (SAM). The sensor was effective for the voltammetric sensing of glyphosate. The method exploits the interaction of glyphosate with copper ions complexed by cysteamine, which results in a decrease in the intensity of copper redox current. Cyclic voltammetry was employed as a measuring technique. When dealing with voltammograms with numerous peaks changing in shape and size, it is difficult to define which signal is the most significant for the analyte determination; in these cases, a helpful approach is chemometrics. In this work, PLS (Partial Least Square regression) has been applied to build models to correlate the signal with the glyphosate concentration in standard aqueous solutions and tap water samples (matrix-matched calibration). The method's figures of merits were evaluated, obtaining a limit of quantification of about 5 µM. The reliability of the proposed sensor was verified by analyzing tap water spiked with glyphosate; recoveries higher than 90 % were achieved.

Colorimetric Paper-Based Analytical Devices (PADs) Backed by Chemometrics for Pd(II) Detection.

This paper presents the development of cheap and selective Paper-based Analytical Devices (PADs) for selective Pd(II) determination from very acidic aqueous solutions. The PADs were obtained by impregnating two cm-side squares of filter paper with an azoic ligand, (2-(tetrazolylazo)-1,8 dihydroxy naphthalene-3,6,-disulphonic acid), termed TazoC. The so-obtained orange TazoC-PADs interact quickly with Pd(II) in aqueous solutions by forming a complex purple-blue-colored already at pH lower than 2. The dye complexes no other metal ions at such an acidic media, making TazoC-PADs highly selective to Pd(II) detection. Besides, at higher pH values, other cations, for example, Cu(II) and Ni(II), can interact with TazoC through the formation of stable and pink-magenta-colored complexes; however, it is possible to quantify Pd(II) in the presence of other cations using a multivariate approach. To this end, UV-vis spectra of the TazoC-PADs after equilibration with the metal ions solutions were registered in the 300-800 nm wavelength range. By applying Partial Least Square regression (PLS), the whole UV-vis spectra of the TazoC-PADs were related to the Pd(II) concentrations both when present alone in solution and also in the presence of Cu(II) and Ni(II). Tailored PLS models obtained with matrix-matched standard solutions correctly predicted Pd(II) concentrations in unknown samples and tap water spiked with the metal cation, making the method promising for quick and economical sensing of Pd(II).

Chemometric-Assisted Litmus Test: One Single Sensing Platform Adapted from 1-13 to Narrow pH Ranges.

A novel 3 × 4 colorimetric sensing platform, named the chemometric-assisted litmus test (CLT), has been developed by covalently anchoring commercial pH indicators to ethylene vinyl alcohol (EVOH). The proposed device can be exploited for pH determinations in a wide range from 1 to 13 and in specific narrow ranges, achieving sufficient accuracy and errors below 0.5 pH units. The experimental procedure is simple, quick and reliable; equilibration is reached in less than 2 h, CLT pictures are acquired by a camera, and data treatment is performed applying chemometric techniques such as principal component analysis (PCA) and partial least square regression (PLS) to RGB indices.

The colorful world of sulfonephthaleins: Current applications in analytical chemistry for "old but gold" molecules.

Sulfonephthaleins represent one of the most common and widely employed reactive dyes in analytical chemistry, thanks to their stability, low-cost, well-visible colors, reactivity and possibilities of chemical modification. Despite being first proposed in 1916, nowadays, these molecules play a fundamental role in biological and medical applications, environmental analyses, food quality monitoring and other fields, with a particular focus on low-cost and disposable devices or methods for practical applications. Since up to our knowledge, no reviews or book chapters focused explicitly on sulfonephthaleins have ever been published, in this review, we will briefly describe sulfonephthaleins history, their acid-base properties will be discussed, and the most recent applications in different fields will be presented, focusing on the last ten years literature (2014-2023). Finally, safety and environmental issues will be briefly discussed, despite being quite controversial.

Potentiometric MIP-Modified Screen-Printed Cell for Phenoxy Herbicides Detection.

In this study, a molecularly imprinted polymer (MIP)-based screen-printed cell is developed for detecting phenoxy herbicides using 2-methyl-4-chlorophenoxyacetic acid (MCPA) as the template. MCPA is a phenoxy herbicide widely used since 1945 to control broadleaf weeds via growth regulation, primarily in pasture and cereal crops. The potentiometric cell consists of a silver/silver chloride pseudo-reference electrode and a graphite working electrode coated with a MIP film. The polymeric layer is thermally formed after drop-coating of a pre-polymeric mixture composed of the reagents at the following molar ratio: 1 MCPA: 15 MAA (methacrylic acid): 7 EGDMA (ethylene glycol dimethacrylate). After template removal, the recognition cavities function as the ionophore of a classical ion selective electrode (ISE) membrane. The detected ion is the deprotonated MCPA specie, negatively charged, so the measurements were performed in phosphate buffer at pH 5.5. A linear decrease of the potential with MCPA concentration, ranging from 4 × 10-8 to 1 × 10-6 mol L-1, was obtained. The detection limit and the limit of quantification were, respectively, 10 nmol L-1 and 40 nmol L-1. A Nernstian slope of about -59 mV/dec was achieved. The method has precision and LOD required for MCPA determination in contaminated environmental samples.

Quick and Easy Covalent Grafting of Sulfonated Dyes to CMC: From Synthesis to Colorimetric Sensing Applications.

Carboxymethyl cellulose, the most promising cellulose-derivatives, pulls together low cost, abundancy, biocompatibility, unique properties and, unlike the precursor, chemical reactivity. This latter aspect arouses the curiosity of chemists around the possibility of chemical modification and the production of interesting functional materials. Here, a two-step reaction is proposed for the covalent anchoring of a wide variety of molecules containing sulfonic groups to CMC. The strength points of the proposed pathway have to be found in the quick and easy reactions and workup that allow to obtain ready-to-use functional materials with very high yields. Having in this case exploited a pH-sensitive dye as a sulfonated molecule, the functional material is an interesting candidate for the development of colorimetric miniaturized sensors via the following drop-casting deposition: once optimized sensors preparation by design of experiments, an example of application on real samples is reported.

Towards intelligent packaging: BCP-EVOH@ optode for milk freshness measurement.

Intelligent packaging represents an emerging trend in the food industry, especially for highly perishable foods like milk and dairy products. Despite the apparent simplicity, miniaturized BCP-EVOH@ sensor, made of bromocresol purple (BCP) covalently bound to ethylene-vinyl alcohol (EVOH) copolymer, meets the goal of milk freshness monitoring during chilled storage, allowing both naked-eye evaluation and chemometric-assisted spoilage modelling and measurements.

Disposable and Low-Cost Colorimetric Sensors for Environmental Analysis.

Environmental contamination affects human health and reduces the quality of life. Therefore, the monitoring of water and air quality is important, ensuring that all areas are acquiescent with the current legislation. Colorimetric sensors deliver quick, naked-eye detection, low-cost, and adequate determination of environmental analytes. In particular, disposable sensors are cheap and easy-to-use devices for single-shot measurements. Due to increasing requests for in situ analysis or resource-limited zones, disposable sensors' development has increased. This review provides a brief insight into low-cost and disposable colorimetric sensors currently used for environmental analysis. The advantages and disadvantages of different colorimetric devices for environmental analysis are discussed.

Chelating Agents in Soil Remediation: A New Method for a Pragmatic Choice of the Right Chelator.

Soil pollution by metal ions constitutes one of the most significant environmental problems in the world, being the ecosystems of extended areas wholly compromised. The remediation of soils is an impelling necessity, and different methodologies are used and studied for reaching this goal. Among them, the application of chelating agents is one of the most promising since it could allow the removal of metal ions while preserving the most meaningful properties of the original soils. The research in this field requires the joined contribute of different expertise spanning from biology to chemistry. In this work, we propose a parsimonious and pragmatic approach for screening among a range of potential chelating agents. This methodology, the Nurchi's method, is based on an extension of the Reilley procedure for EDTA titrations. This allows forecasting the binding ability of chelating agents toward the target polluting metal ions and those typically found in soils, based on the knowledge of the related protonation and complex formation constants. The method is thoroughly developed, and then tested by application to some representative cases. Its use and relevance in biomedical and industrial applications is also discussed.

Development of a Dye-Based Device to Assess Poultry Meat Spoilage. Part I: Building and Testing the Sensitive Array.

The rationale behind the material and dye selection and the investigation of the properties of a solid-phase sensor array designed for following chicken meat spoilage is presented, having in mind that the final target must be the naked eye identification of the degradation steps. The device is obtained by fixing five acid-base indicators, m-cresol purple (1), o-cresol red (2), bromothymol blue (3), thymol blue (4), and chlorophenol red (5), and a sensing molecule specific for thiols, 5,5'-dithiobis(2-nitrodibenzoic acid), called Ellman's reagent, (6) on a commercial cellulose-based support. The dimensions of the sensor and the amount of dye sorbed on the solid are carefully studied. The preparation protocol to get reproducible sensing materials is established, based on the kinetic study and the color change investigation. The material stability and the capacity of changing color, according to the acid-base properties of the dyes, are tested. The sources of uncertainty, coming from the technique employed for signal data acquisition and treatment and from the intrinsic variability of the spots based on the commercial support, are established. The highest variability does not come from photo acquisition by a mobile phone, the effect of the illumination equipment, the partial least-squares (PLS) model employed to assess the amount of dye sorbed into the solid but from the variability of different spots and was found equal to 10%. The uncertainty is adequate for final employment since it is referred to as replicates under different conditions that are definitively judged almost always identical by naked eye evaluation, which is our last target for assessing a change of the colors associated with spoilage.

Development of a Dye-Based Device to Assess the Poultry Meat Spoilage. Part II: Array on Act.

This work presents a colorimetric dye-based array for naked-eye detection of chicken meat spoilage. The array is obtained by fixing five acid-base indicators, m-cresol purple (1), o-cresol red (2), bromothymol blue (3), thymol blue (4), and chlorophenol red (5), and a sensing molecule specific for thiols, 5,5'-dithiobis(2-nitrodibenzoic acid), called Ellman's reagent (6), on a cellulose-based support. The dyes, being permanently charged, are fixed on the support via ion-exchange. The entire degradation process of beast poultry meat, at ambient temperature and in a domestic fridge, is followed by the change of the color of the array, placed in the headspace over the meat samples. The device is set after selection of the most suitable starting form, which could be the acidic or the basic color of indicators, being the proper dye concentration and the dimension of the spots already established. Basing on sensors colors, we identified three levels of the degradation process of chicken meat, named SAFE, WARNING, and HAZARD. By instrumental analysis, we demonstrated that sensors response was correlated to volatile organic compounds (VOCs) composition in the headspace and, thus, to meat spoilage progress. We demonstrated that biogenic amines (BAs), commonly considered a critical spoilage marker, are indeed produced into the samples but never present in the headspace, even in traces, during the investigated time-lapse. The VOC evolution nevertheless allows one to assign the sample as WARNING and further HAZARD. Some indicators turned out to be more informative than others, and the best candidates for a future industrial application resulted in a bromothymol blue (3)-, chlorophenol red (5)-, and Ellman's reagent (6)-based array.

Colorimetric Sensor Array for Monitoring, Modelling and Comparing Spoilage Processes of Different Meat and Fish Foods.

Meat spoilage is a very complex combination of processes related to bacterial activities. Numerous efforts are underway to develop automated techniques for monitoring this process. We selected a panel of pH indicators and a colourimetric dye, selective for thiols. Embedding these dyes into an anion exchange cellulose sheets, i.e., the commercial paper sheet known as "Colour Catcher®" commonly used in the washing machine to prevent colour run problems, we obtained an array made of six coloured spots (here named Dye name-CC@). The array, placed over the tray containing a sample of meat or fish (not enriched at any extend with spoilage products), progressively shows a colour change in the six spots. Photos of the array were acquired as a function of time, RGB indices were used to follow the spoilage, Principal Component Analysis to model the data set. We demonstrate that the array allows for the monitoring the overall spoilage process of chicken, beef, pork and fish, obtaining different models that mimic the degradation pathway. The spoilage processes for each kind of food, followed by the array colour evolution, were eventually compared using three-way PCA, which clearly shows same degradation pattern of protein foods, altered only according to the different substrates.

Salicylamide derivatives for iron and aluminium sequestration. From synthesis to complexation studies.

This paper presents an easy, fast and economic synthesis of chelating agents for medical, environmental and analytical applications, and the evaluation of the stability of their complexes with Fe3+ and Al3+. Complex formation equilibria with Cu2+ and Zn2+ metal ions were also studied to evaluate if the chelating agents can perturb the homeostatic equilibria of these essential metal ions. Effective chelating agents for metal ions, in addition to their well-known medical uses, find an increasing number of applications in environmental remediation, agricultural applications (supplying essential elements in an easily available form), and in analytical chemistry as colorimetric reagents. Besides the stability of the complexes, the lack of toxicity and the low cost are the basic requisites of metal chelating agents. With these aims in mind, we utilized ethyl salicylate, a cheap molecule without toxic effects, and adopted a simple synthetic strategy to join two salicylate units through linear diamines of variable length. Actually, the mutual position of the metal binding oxygen groups, as well as the linker length, affected protonation and complex formation equilibria. A thorough study of the ligands is presented. In particular, the complex formation equilibria of the three ligands toward Fe3+, Al3+, Zn2+ and Cu2+ ions were investigated by combined potentiometric and spectrophotometric techniques. The results are encouraging: all the three ligands form stable complexes with all the investigated metal ions, involving the oxygen donor atoms from the 2-hydroxybenzamido unit, and nitrogen atoms in copper and zinc coordination.

Metal complexation capacity of Antarctic lacustrine sediments.

The purpose of this study is to implement a work that is a part of a project funded by the Italian National Antarctic Research Program (PNRA, Piano Nazionale di Ricerche in Antartide) within the main thematic focus "Chemical Contamination-Global Change". This research was devoted to detect and characterize micro and nano components with strong complexing capability towards metal ions at trace level in sea water, lakes and lacustrine sediments, sampled during the XXII expedition of PNRA. In particular, in the present work, the sorption complexation capacity of an Antarctic lacustrine sediments toward Cu(II) and Pb(II) is described. The characterization of the sorption was undertaken, studying kinetics and isotherm profiles. The lake here considered is Tarn Flat in the area of Terra Nova Bay. The sorption equilibria of Cu(II) and Pb(II) on the lacustrine sediments were reached in about 10 h, and they were best modelled by the Langmuir equation. Preliminary, to establish if the data here obtained were consistent with those reported for the same area in other expeditions, a common multivariate techniques, namely the principal component analysis (PCA), was applied and finally the consistency of the data has been confirmed.

Smart sensory materials for divalent cations: a dithizone immobilized membrane for optical analysis.

An optode for Cu(ii), Cd(ii), Zn(ii) and Hg(ii) sensing has been designed by immobilization of dithizone on a triacetylcellulose membrane (mem-DTZ). The sorption of the metal ions on the mem-DTZ has been thoroughly characterized, in particular sorption kinetics, sorption isotherms and profiles as a function of the pH have been studied. Methods to assess the concentrations of the cations, both individually and in a mixture, in unknown samples, have been developed. In particular, UV-vis spectra and digital information of pictures taken by using a common desktop scanner, of the mem-DTZ sensor after equilibration with different solutions, were acquired and they were correlated with the concentration of the metal ions in solutions. For the single analyte determination, the RGB parameters of the pictures were subjected to Principal Component Analysis (PCA); otherwise the UV-vis spectra of a mixture of two cations were elaborated by Partial Least Squares (PLS) Regression. The membrane responds to the divalent cations by changing colour reversibly. The response time of the mem-DTZ is about 1 h for Cd(ii), Hg(ii) and Zn(ii), but longer for Cu(ii): more than 10 h are required. The linear interval is in the range of about 10-7 to 10-5 M for all metal ions. The limit of detection (LOD) is around 10-6 M for Cu(ii), Cd(ii) and Hg(ii); for Zn(ii) a lower LOD of 10-7 M is obtained. The applicability of mem-DTZ to real samples has been proved by analysis of the four metal cations in a certificate material (Sewage Sludge CC136A), white wine, and drinking water samples.

A Speciation Study on the Perturbing Effects of Iron Chelators on the Homeostasis of Essential Metal Ions.

A number of reports have appeared in literature calling attention to the depletion of essential metal ions during chelation therapy on ß-thalassaemia patients. We present a speciation study to determine how the iron chelators used in therapy interfere with the homeostatic equilibria of essential metal ions. This work includes a thorough analysis of the pharmacokinetic properties of the chelating agents currently in clinical use, of the amounts of iron, copper and zinc available in plasma for chelation, and of all the implied complex formation constants. The results of the study show that a significant amount of essential metal ions is complexed whenever the chelating agent concentration exceeds the amount necessary to coordinate all disposable iron--a frequently occurring situation during chelation therapy. On the contrary, copper and zinc do not interfere with iron chelation, except for a possible influence of copper on iron speciation during deferiprone treatment.

Novel DFO-SAM on mesoporous silica for iron sensing. Part I. Synthesis optimization and characterization of the material.

The synthesis and the physico-chemical characterisation of a novel solid phase, designed for iron(iii) sorption, are presented. The solid (indicated in the following as DFO-SAMMS) is made with a hydroxamate siderophore, the deferoxamine (DFO), covalently bound on a self-assembled monolayer on mesoporous silica (SAMMS). The data demonstrate that the DFO molecules are bound to the solid material, grafted on the surface and do not enter the silica pores. A new one-pot synthesis is presented in which DFO is dissolved in DMSO, and left to react with GPTMS with stirring overnight. In the same mixture, SAMMS is added to get the final product. The optimisation of experimental conditions of this novel one-pot synthesis is presented, with results indicating that a temperature of 90 °C, for the reaction between DFO and GPTMS, and the use of MCM-41 silica are the most convenient conditions. The kinetics of sorption reveals that the iron uptake is relatively fast, around 100 min at pH = 2.5, and from the sorption profile of iron(iii), the estimated capacity of the product obtained under optimized conditions was higher than 0.3 mmol g(-1). The results found in the present research are very promising for application in real biological samples.