Scalable nanophotonic neural probes for multicolor and on-demand light delivery in brain tissue.

Neural probes arein vivobrain-invasive devices that record and manipulate neural circuits using electricity, light, or drugs. The capability to shine distinct wavelengths and control their respective output locations for activation or deactivation of specific groups of neurons is desirable but remains unachieved. Here, we discuss our probe's capability to deliver two independently controllable wavelengths (450 and 655 nm) in the location(s) of interest using nanophotonic directional couplers and ring resonators. These nanophotonics are scalable to dozens of outputs without significantly increasing the device's lateral dimensions. Furthermore, they are entirely passive and thus do not require electrical input that results in heat generation. Besides, we integrate a high number of electrodes for a simultaneous neural activity readout. Thus, we overcome the challenges associated with multicolor illumination for neural devices by exploiting the capability of miniaturizable, passive probes to deliver two different frequencies in several areas of interest. These devices open the path towards investigating thein vivoelectrical signal propagation under the individual or simultaneous activation or inhibition of distinct brain regions.

Binary pseudo-random patterned structures for modulation transfer function calibration and resolution characterization of a full-field transmission soft x-ray microscope.

We present a modulation transfer function (MTF) calibration method based on binary pseudo-random (BPR) one-dimensional sequences and two-dimensional arrays as an effective method for spectral characterization in the spatial frequency domain of a broad variety of metrology instrumentation, including interferometric microscopes, scatterometers, phase shifting Fizeau interferometers, scanning and transmission electron microscopes, and at this time, x-ray microscopes. The inherent power spectral density of BPR gratings and arrays, which has a deterministic white-noise-like character, allows a direct determination of the MTF with a uniform sensitivity over the entire spatial frequency range and field of view of an instrument. We demonstrate the MTF calibration and resolution characterization over the full field of a transmission soft x-ray microscope using a BPR multilayer (ML) test sample with 2.8 nm fundamental layer thickness. We show that beyond providing a direct measurement of the microscope's MTF, tests with the BPRML sample can be used to fine tune the instrument's focal distance. Our results confirm the universality of the method that makes it applicable to a large variety of metrology instrumentation with spatial wavelength bandwidths from a few nanometers to hundreds of millimeters.

Combination of a spectrometer-on-chip and an array of Young's interferometers for laser spectrum monitoring.

This Letter presents the design and experimental results for an on-chip photonic device for laser spectrum monitoring that combines a nanospectrometer and an array of Young's interferometers. The array of Young's interferometers and the spectrometer measure the width and wavelength of a spectrum in visible light, respectively. The accuracy of spectral width measurements is around 10% for FWHM higher than 2.5 pm. The spectrometer-on-chip is based on a digital planar hologram, and provides a resolution around 145 pm within the spectral range of 719-861 nm (142 nm bandwidth). The performance of the device is demonstrated for distinguishing between the single- and two-longitudinal mode operation of a fiber Bragg grating laser diode with 23 pm mode separation.

Reaching the theoretical resonance quality factor limit in coaxial plasmonic nanoresonators fabricated by helium ion lithography.

Optical antenna structures have revolutionized the field of nano-optics by confining light to deep subwavelength dimensions for spectroscopy and sensing. In this work, we fabricated coaxial optical antennae with sub-10-nanometer critical dimensions using helium ion lithography (HIL). Wavelength dependent transmission measurements were used to determine the wavelength-dependent optical response. The quality factor of 11 achieved with our HIL fabricated structures matched the theoretically predicted quality factor for the idealized flawless gold resonators calculated by finite-difference time-domain (FDTD). For comparison, coaxial antennae with 30 nm critical dimensions were fabricated using both HIL and the more common Ga focus ion beam lithography (Ga-FIB). The quality factor of the Ga-FIB resonators was 60% of the ideal HIL results for the same design geometry due to limitations in the Ga-FIB fabrication process.

Obtaining nanoimprint template gratings with 10 nm half-pitch by atomic layer deposition enabled spacer double patterning.

A strategy for fabricating nanoimprint templates with sub-10 nm line and 20 nm pitch gratings is demonstrated, by combining electron beam lithography and atomic layer deposition. This is achieved through pitch division using a spacer double-patterning technique. The nanostructures are then replicated using step-and-repeat ultra-violet assisted nanoimprint lithography.

Plasmon-enhanced photocathode for high brightness and high repetition rate x-ray sources.

In this Letter, we report on the efficient generation of electrons from metals using multiphoton photoemission by use of nanostructured plasmonic surfaces to trap, localize, and enhance optical fields. The plasmonic surface increases absorption over normal metals by more than an order of magnitude, and due to the localization of fields, this results in over 6 orders of magnitude increase in effective nonlinear quantum yield. We demonstrate that the achieved quantum yield is high enough for use in rf photoinjectors operating as electron sources for MHz repetition rate x-ray free electron lasers.

Plasmon resonance tuning in metallic nanocavities.

Nanocavities fabricated in a metallic surface have important and technologically useful properties of complete light absorption and strong field enhancement. Here, we demonstrate how a nanometerthick alumina deposition inside such a cavity can be used to gain an exquisite control over the resonance wavelength. This process allows achieving a precise control over the spectral response and is completely reversible allowing many tuning attempts to be made on a single structure until the optimum performance is achieved.

Mapping local charge recombination heterogeneity by multidimensional nanospectroscopic imaging.

As materials functionality becomes more dependent on local physical and electronic properties, the importance of optically probing matter with true nanoscale spatial resolution has increased. In this work, we mapped the influence of local trap states within individual nanowires on carrier recombination with deeply subwavelength resolution. This is achieved using multidimensional nanospectroscopic imaging based on a nano-optical device. Placed at the end of a scan probe, the device delivers optimal near-field properties, including highly efficient far-field to near-field coupling, ultralarge field enhancement, nearly background-free imaging, independence from sample requirements, and broadband operation. We performed ~40-nanometer-resolution hyperspectral imaging of indium phosphide nanowires via excitation and collection through the probes, revealing optoelectronic structure along individual nanowires that is not accessible with other methods.

Sub-20 nm laser ablation for lithographic dry development.

Pattern collapse of small or high aspect ratio lines during traditional wet development is a major challenge for miniaturization in nanolithography. Here we report on a new dry process which combines high resolution resist exposure with selective laser ablation to achieve high resolution with high aspect ratios. Using a low power 532 nm laser, we dry develop a normally negative tone methyl acetoxy calix(6)arene in positive tone to reveal sub-20 nm half-pitch features in a ∼100 nm film at aspect ratios unattainable with conventional development with ablation time of 1-2 s per laser pixel (∼600 nm diameter spot). We also demonstrate superior negative tone wet development by combining electron beam exposure with subsequent laser exposure at a non-ablative threshold that requires far less electron beam exposure doses than traditional wet development.

Multiband wavelength demultiplexer based on digital planar holography for on-chip spectroscopy applications.

A novel type of multiband wavelength demultiplexer for on-chip spectroscopy applications is proposed, and first results of the device fabrication and characterization are reported. The devices are based on computer-designed digital planar holograms, which involve millions of lines specifically located and oriented in order to direct output light into designed focal channels according to the wavelength. Devices operate in four individual bandwidths within the visible range (477.2-478.0 nm, 528.8-529.9 nm, 586.4-587.7 nm, 628.9-630.4 nm) with 96 channels and spectral channel spacing down to 0.0375 nm/channel.

Single digit nanofabrication by step-and-repeat nanoimprint lithography.

A novel strategy for fabricating nanoimprint templates with sub-10 nm patterns is demonstrated by combining electron beam lithography and atomic layer deposition. Nanostructures are replicated by step-and-repeat nanoimprint lithography and successfully transferred into functional material with high fidelity. The process extends the capacity of step-and-repeat nanoimprint lithography as a single digit nanofabrication method. Using the ALD process for feature shrinkage, we identify a size dependent deposition rate.

A 10,000 groove/mm multilayer coated grating for EUV spectroscopy.

Ultra-high spectral resolution in the EUV and soft x-ray energy ranges requires the use of very high line density gratings with optimal design resulting in use of a Blazed Multilayer Grating (BMG) structure. Here we demonstrate the production of near-atomically perfect Si blazed substrates with an ultra-high groove density (10,000 l/mm) together with the measured and theoretical performance of an Al/Zr multilayer coating on the grating. A 1st order absolute efficiency of 13% and 24.6% was achieved at incidence angles of 11° and 36° respectively. Cross-sectional TEM shows the effect of smoothing caused by the surface mobility of deposited atoms and we correlate this effect with a reduction in peak diffraction efficiency. This work shows the high performance that can be achieved with BMGs based on small-period anisotropic etched Si substrates, but also the constraints imposed by the surface mobility of deposited species.

Nonperturbative visualization of nanoscale plasmonic field distributions via photon localization microscopy.

We demonstrate the nonperturbative use of diffraction-limited optics and photon localization microscopy to visualize the controlled nanoscale shifts of zeptoliter mode volumes within plasmonic nanostructures. Unlike tip- or coating-based methods for mapping near fields, these measurements do not affect the electromagnetic properties of the structure being investigated. We quantify the local field manipulation capabilities of asymmetric bowtie antennas, in agreement with theoretical calculations. The photon-limited localization accuracy of nanoscale mode positions is determined for many of the measured devices to be within a 95% confidence interval of +/-2.5 nm. This accuracy also enables us to characterize the effects of nm-scale fabrication irregularities on local plasmonic mode distributions.

Chemical Raman enhancement of organic adsorbates on metal surfaces.

Using first-principles theory and experiments, chemical contributions to surface-enhanced Raman spectroscopy for a well-studied organic molecule, benzene thiol, chemisorbed on planar Au(111) surfaces are explained and quantified. Density functional theory calculations of the static Raman tensor demonstrate a strong mode-dependent modification of benzene thiol Raman spectra by Au substrates. Raman active modes with the largest enhancements result from stronger contributions from Au to their electron-vibron coupling, as quantified through a deformation potential. A straightforward and general analysis is introduced to extract chemical enhancement from experiments for specific vibrational modes; measured values are in excellent agreement with our calculations.

Exploratory evaluation of an obese population seeking bariatric surgery in an Italian public service.

Obesity is a difficult to treat multi-problematic disease. Bariatric surgery (BS) has been regarded as the most effective therapeutic option, however the outcomes strongly depend on baseline conditions and further behavioural modifications. Our aim was to assess the characteristics of severely obese patients seeking BS in a Public Health Service in Italy. Socio-demographic characteristics, eating habits and the presence of stressful situations associated to weight increase, as well as psychiatric disorders of 111 outpatients attending our BS Program were assessed. Twenty-seven percent of patients have familiar history of obesity (FHO). Differences between patients having or not having a FHO were found for several psychiatric conditions, including lower Bulimic symptoms (p=0.025) and lower use of Alcohol (p=0.045). A total of 28.8% of the participants reported a BED; those patients do not differ in BMI (p=0.437) from non-BED patients but had higher psychological disorders associated to eating disorder, as for example Bulimic symptoms (p=0.000), higher BES scores (p=0.000) and psychological distress, such as Depression (p=0.000). Nearly 50% of patients had any psychiatric disorders and depression was the most common disturbance (32.4%); anxiety disorder was present in 15.3% of patients. Moreover, patients who have disclosed traumatic episodes (11.7%) presented higher distress associated to eating disorder variables, such as BES (p=0.001) and EDI-2 BU scores (p=0.000) and presence of BED (p=0.001), and women are more likely to be in this group (p=0.043). Our report proposes that multiple causative factors play a role in obesity, and we need to take them all into account to plan a comprehensive pre- and post-surgical treatment plan.

Step and repeat UV nanoimprint lithography on pre-spin coated resist film: a promising route for fabricating nanodevices.

A step and repeat UV nanoimprint lithography process on pre-spin coated resist film is demonstrated for patterning a large area with features sizes down to sub-15 nm. The high fidelity between the template and imprinted structures is verified with a difference in their line edge roughness of less than 0.5 nm (3σ deviation value). The imprinted pattern's residual layer is well controlled to allow direct pattern transfer from the resist into functional materials with very high resolution. The process is suitable for fabricating numerous nanodevices.

Functional plasmonic antenna scanning probes fabricated by induced-deposition mask lithography.

We have fabricated plasmonic bowtie antennae on the apex of silicon atomic-force microscope cantilever tips that enhance the local silicon Raman scattering intensity by approximately 4 x 10(4) when excited near the antenna resonance. The antennae were fabricated using a novel method, induced-deposition mask lithography (IDML), capable of creating high-purity metallic nanostructures on non-planar, non-conducting substrates with high repeatability. IDML involves electron-beam-induced deposition of a W or SiO(x) hard mask on the material to be pattered, here a 20 nm Au film, followed by Ar ion etching to remove the mask and the unmasked gold, leaving a chemically pure Au bowtie antenna. Antenna function and reproducibility was confirmed by comparing Raman spectra for excitation polarized parallel and perpendicular to the antenna axis, as well as by dark-field spectroscopic characterization of resonant modes. The field enhancement of these plasmonic AFM antennae tips was comparable with antennae produced by electron-beam lithography on flat substrates.

Manipulating nanoscale light fields with the asymmetric bowtie nano-colorsorter.

We present a class of devices called Asymmetric Bowtie nano-Colorsorters. These devices are specifically engineered to not only capture and confine optical fields, but also to spectrally filter and steer them while maintaining nanoscale field distributions. We show that spectral properties and localized spatial mode distributions can be readily tuned by controlled asymmetry. Nano-Colorsorters can control light's spatial and spectral distributions at the nanoscale and thus significantly impact applications ranging from broadband light harvesting to ultrafast wavelength-selective photodetection.

Self-collimation of light over millimeter-scale distance in a quasi-zero-average-index metamaterial.

Inspired by the concept of complementary media, we experimentally demonstrate that an engineered metamaterial made of alternating, stripe layers of negatively refracting (photonic crystals) and positively refracting (air) materials strongly collimates a beam of near-infrared light. This quasi-zero-average-index metamaterial fully preserves the beam spot size throughout the sample for a light beam traveling through the metamaterial a distance of 2 mm-more than 1000 times the input wavelength lambda=1.55 microm. These results demonstrate the first explicit experimental verification of optical antimatter as proposed by Pendry and Ramakrishna [J. Pendry and S. Ramakrishna, J. Phys. Condens. Matter 15, 6345 (2003)10.1088/0953-8984/15/37/004], using two complementary media in which each n(eff)=-1 layer appears to annihilate an equal thickness layer of air.

Treatment dropout in drug-addicted women: are eating disorders implicated?

A high prevalence of eating disorders among drug-addicted female patients has been noted, and it could be associated to psychopathological underlying factors. Our aim was to assess eating disorder traits in women approaching a residential program for drug addiction. We hypothesized that these traits would correlate to more general psychopathological factors, and would influence treatment relapse. A sample of 204 substance dependent women attending a residential treatment was screened for psychopathological indices, and follow-up data were obtained at the end of the treatment. Clients had a high risk for eating disorders (15%), and lifetime prevalence was even higher (20%). Disordered eating was associated to psychopathological distress, in particular harm avoidance resulted significantly lower (p=0.005), evoking higher unresponsiveness to danger. Drug addiction treatment outcome is associated to completion of defined programs, and eating disorder was a key covariable in determining treatment relapse or success (p=0.03). Clinicians should be aware of this potential co-morbidity, and concurrent treatments should be attempted, in order to prevent symptomatic shifting.