RESUMO
BACKGROUND: Biomarkers that predict the treatment response in patients with knee osteoarthritis are scarce. This study aimed to investigate the potential role of synovial fluid cell counts and their ratios as biomarkers of primary knee osteoarthritis. METHODS: This retrospective study investigated 96 consecutive knee osteoarthritis patients with knee effusion who underwent joint fluid aspiration analysis and received concomitant intra-articular corticosteroid injections and blood tests. The monocyte-to-lymphocyte ratio (MLR) and neutrophil-to-lymphocyte ratio (NLR) were calculated. After 6 months of treatment, patients were divided into two groups: the responder group showing symptom resolution, defined by a visual analog scale (VAS) score of ≤ 3, without additional treatment, and the non-responder group showing residual symptoms, defined by a VAS score of > 3 and requiring further intervention, such as additional medication, repeated injections, or surgical treatment. Unpaired t-tests and univariate and multivariate logistic regression analyses were conducted between the two groups to predict treatment response after conservative treatment. The predictive value was calculated using the area under the receiver operating characteristic curve, and the optimal cutoff value was determined. RESULTS: Synovial fluid MLR was significantly higher in the non-responder group compared to the responder group (1.86 ± 1.64 vs. 1.11 ± 1.37, respectively; p = 0.02). After accounting for confounding variables, odds ratio of non-responder due to increased MLR were 1.63 (95% confidence interval: 1.11-2.39). The optimal MLR cutoff value for predicting patient response to conservative treatment was 0.941. CONCLUSIONS: MLR may be a potential biomarker for predicting the response to conservative treatment in patients with primary knee osteoarthritis.
Assuntos
Tratamento Conservador , Linfócitos , Monócitos , Osteoartrite do Joelho , Líquido Sinovial , Humanos , Osteoartrite do Joelho/terapia , Osteoartrite do Joelho/diagnóstico , Estudos Retrospectivos , Masculino , Feminino , Líquido Sinovial/citologia , Pessoa de Meia-Idade , Idoso , Resultado do Tratamento , Tratamento Conservador/métodos , Injeções Intra-Articulares , Biomarcadores/análise , Biomarcadores/sangue , Valor Preditivo dos Testes , Contagem de LeucócitosRESUMO
Templating is essential in hip arthroplasty preparation, facilitating implant size prediction and surgical rehearsal. It ensures the selection of suitable implants according to patient anatomy and disease, aiming to minimize post-operative complications. Various templating methods exist, including traditional acetate templating on both analog and digital images, alongside digital templating on digital images, which is categorized into 2D and 3D approaches. Despite the popularity of acetate templating on digital images, challenges such as the requirement for physical templates and result preservation persist. To address these limitations, digital templating with software like OrthoSize and Orthoview has been suggested, although not universally accessible. This technical note advocates for Microsoft PowerPoint as an effective alternative for 2D digital templating, highlighting its user-friendly features for image manipulation without needing specialized software. The described method involves scanning acetate templates, adjusting the images in PowerPoint 365 for size, position, and calibration on patient radiographs, and demonstrating reliability through preliminary assessments, with intraclass correlation coefficient (ICC) values indicating a high level of agreement for cup and stem size (ICC = 0.860, 0.841, respectively) but moderate for neck length (ICC = 0.592). We have introduced a method for performing 2D digital templating in the clinical field without the need for specialized software dedicated to digital templating. We believe this method significantly improves the accessibility to 2D digital templating, which was previously limited by the need for digital templating software. Additionally, it enables surgeons to easily establish arthroplasty plans and share them, overcoming the limitations of acetate templates.
RESUMO
OBJECTIVE: This study aimed to propose treatment protocol and identify patterns of tillaux fractures using three-dimensional (3D) computed tomography (CT) analysis and to describe an effective reduction technique. METHODS: Forty-two juvenile patients with tillaux fractures were evaluated with 3D-CT scan for fracture displacement pattern and received surgical treatment. Tillaux fragment was reduced by pushing the superomedial quadrant part of the fragment slightly downward towards the ankle joint from anterolateral to posteromedial through 5-mm skin incisions with mosquito forceps. A 4.0 cannulated screw was subsequently inserted from the anterolateral to the posteromedial side parallel to the ankle joint. We analysed the distance and direction of fracture displacement with 3D-CT before the surgery. Pre-operative and post-operative plain radiographs were evaluated. RESULTS: Pre-operative 3D-CT analysis revealed a common fracture pattern, varus tilt, and external rotation of fragment. We achieved satisfactory reduction with residual fracture gaps less than 2 mm in 42 cases. Two cases had a 13-mm anterior gap that was reduced by mini-open reduction because of periosteal impingement. No significant clinical complications were found. CONCLUSION: The closed reduction technique developed based on the fracture pattern identified by 3D-CT anatomical analysis is safe and effective in treating tillaux fractures.
Assuntos
Fixação Interna de Fraturas , Imageamento Tridimensional , Tomografia Computadorizada por Raios X , Humanos , Fixação Interna de Fraturas/métodos , Fixação Interna de Fraturas/instrumentação , Imageamento Tridimensional/métodos , Tomografia Computadorizada por Raios X/métodos , Masculino , Feminino , Criança , Adolescente , Parafusos Ósseos , Redução Fechada/métodos , Fraturas do Tornozelo/cirurgia , Fraturas do Tornozelo/diagnóstico por imagem , Cuidados Pré-Operatórios/métodosRESUMO
Medical images are acquired through diverse imaging systems, with each system employing specific image reconstruction techniques to transform sensor data into images. In MRI, sensor data (i.e., k-space data) is encoded in the frequency domain, and fully sampled k-space data is transformed into an image using the inverse Fourier Transform. However, in efforts to reduce acquisition time, k-space is often subsampled, necessitating a sophisticated image reconstruction method beyond a simple transform. The proposed approach addresses this challenge by training a model to learn domain transform, generating the final image directly from undersampled k-space input. Significantly, to improve the stability of reconstruction from randomly subsampled k-space data, folded images are incorporated as supplementary inputs in the dual-input ETER-net. Moreover, modifications are made to the formation of inputs for the bi-RNN stages to accommodate non-fixed k-space trajectories. Experimental validation, encompassing both regular and irregular sampling trajectories, validates the method's effectiveness. The results demonstrated superior performance, measured by PSNR, SSIM, and VIF, across acceleration factors of 4 and 8. In summary, the dual-input ETER-net emerges as an effective both regular and irregular sampling trajectories, and accommodating diverse acceleration factors.
Assuntos
Processamento de Imagem Assistida por Computador , Imageamento por Ressonância Magnética , Processamento de Imagem Assistida por Computador/métodos , Análise de Fourier , Imageamento por Ressonância Magnética/métodos , Imagens de Fantasmas , AlgoritmosRESUMO
PURPOSE: The purpose of this study was to demonstrate the clinical utility of controlled posterior condylar milling (CPCM) in gap balancing while minimally resecting the tibia during fixed-bearing unicompartmental knee arthroplasty (UKA). METHODS: This study is a retrospective cohort study. Patients who underwent medial UKA for isolated medial compartment osteoarthritis with a minimum follow-up of 2 years were included. The patients were divided into two groups: the conventional group (n = 56) and the CPCM group (n = 66). In the CPCM group, the proximal tibia was resected at the level of the distal end of the subchondral bone. If the flexion gap was tighter than extension, the posterior condyle was additionally milled to adjust gap tightness. Standing knee X-ray and scanogram were used to evaluate alignment and tibia resection amount. Range of motion (ROM) and Western Ontario McMaster Universities Osteoarthritis Index (WOMAC) scores were used to evaluate clinical outcomes. RESULTS: The CPCM group showed significantly smaller tibia resection (3.6 ± 1.9 mm) compared to the conventional group (5.2 ± 2.7 mm) (p < 0.001). Postoperative ROM (133.0 ± 8.3°, 135.2 ± 7.2°, n.s.) and WOMAC (19.3 ± 13.6, 23.6 ± 17.7, n.s.) were not significantly different between the two groups. Postoperative periprosthetic fractures occurred in two patients in conventional group, while the CPCM group had no periprosthetic fractures. CONCLUSION: The CPCM technique may be a simple and useful intraoperative technique that can achieve minimal tibia resection and promising clinical outcomes while easily adjusting gap tightness between flexion and extension during medial fixed-bearing UKA. LEVEL OF EVIDENCE: Level III.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Humanos , Artroplastia do Joelho/métodos , Tíbia/cirurgia , Articulação do Joelho/cirurgia , Estudos Retrospectivos , Osteoartrite do Joelho/cirurgia , Amplitude de Movimento ArticularRESUMO
PURPOSE: Lithotomy position has been widely used in the various urologic surgery. Occasionally sensory and motor problems of the lower extremities are occurred due to the lithotomy position and these deficits may be related with sciatic nerve injury (SNI). Inflammatory process is a factor to induce functional impairment after SNI. Therefore, we evaluated the role of adenosine A2A receptor agonists, polydeoxyribonucleotide (PDRN) showing anti-inflammatory effect on locomotor function following SNI in rats. METHODS: Sciatic nerve was compressed with surgical clips for 1 minute after exposing of right sciatic nerve. After 3 days of SNI, PDRN (2, 4, and 8 mg/kg) was applied to the damaged area of sciatic nerve once daily for 10 days. Walking track analysis was conducted for locomotor function and plantar test was performed for thermal pain sensitivity. Level of cyclic adenosine-3´,5´-monophosphate (cAMP) were measured using enzyme-linked immunosorbent assay. Western blot analysis was performed for tumor necrosis factor (TNF)-α, interleukin (IL)-1ß, cAMP response element binding protein (CREP), vascular endothelial growth factor (VEGF). Immunofluorescence for neurofilament was also conducted. RESULTS: Locomotor function was decreased and thermal pain sensitivity was increased by SNI. SNI enhanced proinflammatory cytokines' production, such as TNF-α and IL-1ß, while suppressed CREP phosphorylation and cAMP level. SNI also reduced the expression of VEGF and neurofilaments. However, treatment with PDRN inhibited proinflammatory cytokines' production and upregulated CREP phosphorylation and cAMP expression. PDRN also enhanced the expression of VEGF and neurofilaments. As a result, PDRN improved locomotor function and alleviated thermal hyperalgesia after SNI. CONCLUSION: PDRN has shown potential to be used as an effective treatment for neuropathic pain.