Recent advancements in development and application of microbial cellulose in food and non-food systems.

Microbial cellulose is a fermented form of very pure cellulose with a fibrous structure. The media rich in glucose or other carbon sources are fermented by bacteria to produce microbial cellulose. The bacteria use the carbon to produce cellulose, which grows as a dense, gel-like mat on the surface of the medium. The product was then collected, cleaned, and reused in various ways. The properties of microbial cellulose, such as water holding capacity, gas permeability, and ability to form a flexible, transparent film make it intriguing for food applications. Non-digestible microbial cellulose has been shown to improve digestive health and may have further advantages. It is also very absorbent, making it a great option for use in wound dressings. The review discusses the generation of microbial cellulose and several potential applications of microbial cellulose in fields including pharmacy, biology, materials research, and the food industry.

Spray-freeze-drying as emerging and substantial quality enhancement technique in food industry.

Spray freeze drying is an emerging technology in the food industry with numerous applications. Its ability to preserve food quality, maintain nutritional value, and reduce bulk make it an attractive option to food manufacturers. Spray freeze drying can be used to reduce the water content of foods while preserving the shelf life and nutritional value. Spray freeze-drying of food products is a process that involves atomizing food into small droplets and then flash-freezing them. The frozen droplets are then placed in a vacuum chamber and heated, causing the liquid to evaporate and the solid particles to become a dry powder. Spray freeze drying has become a valuable tool for the food industry through its ability to process a wide range of food products. This review's prime focus is understanding spray freeze-dried approaches and emphasizing their applicability in various products.

Bioactive properties of clove (Syzygium aromaticum) essential oil nanoemulsion: A comprehensive review.

Syzygium aromaticum, commonly called clove, is a culinary spice with medical uses. Clove is utilized in cosmetics, medicine, gastronomy, and agriculture due to its abundance of bioactive components such as gallic acid, flavonoids, eugenol acetate, and eugenol. Clove essential oil has been revealed to have antibacterial, antinociceptive, antibacterial activities, antifungal, and anticancerous qualities. Anti-inflammatory chemicals, including eugenol and flavonoids, are found in clove that help decrease inflammation and alleviate pain. The anti-inflammatory and analgesic qualities of clove oil have made it a popular natural cure for toothaches and gum discomfort. Due to its therapeutic potential, it has been used as a bioactive ingredient in coating fresh fruits and vegetables. This review article outlines the potential food processing applications of clove essential oil. The chemical structures of components, bioactive properties, and medicinal potential of clove essential oil, including phytochemical importance in food, have also been thoroughly addressed.

Recent insights on advancements and substantial transformations in food printing technology from 3 to 7D.

Food printing using 3D, 4D, and 5D printing processes has received a lot of interest as a result of rising living standards and increased customer desire for new foods. In the food industry, 3D as well as 4D printing are extremely effective methods for additive manufacturing. The 3D printing technology produces flat objects with a variety of mechanical strengths. The strength of the object depends on the type of material used and the printing process. Printing structures with the most complex geometric, such as curved surfaces, necessitates the usage of supplementary material. The 4D printing procedure necessitates additional stimuli in order to adjust the aspect of the generated geometry. These obstacles can be addressed by employing 5D printing techniques, which prints the product in three motions and two rotational axes without the use of additional support material. These emerging innovations are likely to result in substantial advancements in all industries, including the manufacturing of high-quality food products. Food printing technology can be used to create long shelf-life products by printing food with protective coatings that prevent oxidation and degradation. Foods can also be printed in specific shapes or sizes to reduce surface area exposed to air. 6D printed objects can be created as a result of 5D printing because it is regarded as a by-product of 5D printing technology. 6D printing can save time and money by using the right processing parameters to create strong materials that are more sensitive to stimuli. 7D printing can enable more efficient production processes, reduce costs, and enable the development of products that are more complex and intricate than what is achievable with traditional manufacturing methods. The revolutionary change brought by food printing technologies in the field of applications, research and development, processing, advantages in food industry have been discussed in this paper.

Recent advances in the production of bionanomaterials for development of sustainable food packaging: A comprehensive review.

Polymers originating from natural macromolecule based polymeric materials have gained popularity due to the demand for green resources to develop unique, eco-friendly, and high-quality biopolymers. The objective of this review is to address the utilization of bionanomaterials to improve food quality, safety, security, and shelf life. Bionanomaterials are synthesized by integrating biological molecules with synthetic materials at the nanoscale. Nanostructured materials derived from biopolymers such as cellulose, chitin, or collagen can be employed for the development of sustainable food packaging. Green materials are cost-effective, biocompatible, biodegradable, and renewable. The interaction of nanoparticles with biological macromolecules must be analyzed to determine the properties of the packaging film. The nanoparticles control the growth of bacteria that cause food spoiling by releasing distinctive chemicals. Bio-nanocomposites and nanoencapsulation systems have been used in antimicrobial bio-based packaging solutions to improve the efficiency of synergism. Nanomaterials can regulate gas and moisture permeability, screen UV radiation, and limit microbial contamination, keeping the freshness and flavor of the food. Food packaging based on nanoparticles embedded biopolymers can alleviate environmental concerns by lowering the amount of packaging materials required and enhancing packaging recyclability. This results in less waste and a more eco-sustainable approach to food packaging. The study on current advances in the production of bionanomaterials for development of sustainable food packaging involves a detailed investigation of the available data from existing literature, as well as the compilation and analysis of relevant research results using statistical approaches.

Phytochemical Properties, Extraction, and Pharmacological Benefits of Naringin: A Review.

This review describes the various innovative approaches implemented for naringin extraction as well as the recent developments in the field. Naringin was assessed in terms of its structure, chemical composition, and potential food sources. How naringin works pharmacologically was discussed, including its potential as an anti-diabetic, anti-inflammatory, and hepatoprotective substance. Citrus flavonoids are crucial herbal additives that have a huge spectrum of organic activities. Naringin is a nutritional flavanone glycoside that has been shown to be effective in the treatment of a few chronic disorders associated with ageing. Citrus fruits contain a common flavone glycoside that has specific pharmacological and biological properties. Naringin, a flavone glycoside with a range of intriguing characteristics, is abundant in citrus fruits. Naringin has been shown to have a variety of biological, medicinal, and pharmacological effects. Naringin is hydrolyzed into rhamnose and prunin by the naringinase, which also possesses l-rhamnosidase activity. D-glucosidase subsequently catalyzes the hydrolysis of prunin into glucose and naringenin. Naringin is known for having anti-inflammatory, antioxidant, and tumor-fighting effects. Numerous test animals and cell lines have been used to correlate naringin exposure to asthma, hyperlipidemia, diabetes, cancer, hyperthyroidism, and osteoporosis. This study focused on the many documented actions of naringin in in-vitro and in-vivo experimental and preclinical investigations, as well as its prospective therapeutic advantages, utilizing the information that is presently accessible in the literature. In addition to its pharmacokinetic characteristics, naringin's structure, distribution, different extraction methods, and potential use in the cosmetic, food, pharmaceutical, and animal feed sectors were discussed.

Advances of nanofluid in food processing: Preparation, thermophysical properties, and applications.

Nanofluids (NFs) are homogenous mixes of solid nanoparticles as well as base fluid in which the size of the solid nanoparticles (NPs) is smaller than 100 nm. These solid NPs are intended to enhance the thermophysical characteristics and heat transmission attributes of the base fluid. The thermophysical characteristics of nanofluids are influenced by their density, viscosity, thermal conductivity and specific heat. These colloidal solutions of nanofluids include condensed nanomaterials such as nanoparticles, nanotubes, nanofibers, nanowires, nanosheets, and nanorods. The effectiveness of NF is significantly influenced by temperature, shape, size, type, as well as the concentration of NPs or the thermal characteristics of the base fluid. Compared to oxide NPs, metal NPs have superior thermal conductivity. Many of these investigations revealed that hybrid NFs had enhanced thermal conductivity than traditional ones. Thermal conductivity values are reduced by the formation of clusters in nanofluid. When compared to spherically formed nanoparticles, cylindrically shaped nanoparticles produced superior outcomes. In food industries, NFs could be used in various unit operations where heat needs to be transported from a heating or cooling medium to food product using a heat exchanger, as in freezing, pasteurization, refrigeration, drying, thawing, sterilization, and evaporation. The objective of this review is to analyze the recent developments in the research of nanofluids including innovative production methods, stability assessment, enhancement approaches, and thermophysical properties of nanofluids.

Exploiting the bioactive properties of essential oils and their potential applications in food industry.

Fruits are an abundant source of minerals and nutrients. High nutritional value and easy-to-consume property have increased its demand. In a way to fulfil this need, farmers have increased production, thus making it available for consumers in various regions. This distribution of fruits to various regions deals with many associated problems like deterioration and spoilage. In a way, the common practices that are being used are stored at low temperatures, preservation with chemicals, and many more. Recently, edible coating has emerged as a promising preservation technique to combat the above-mentioned problems. Edible coating stands for coating fruits with bioactive compounds which maintains the nutritional characteristics of fruit and also enhances the shelf life. The property of edible coating to control moisture loss, solute movement, gas exchange, and oxidation makes it most suitable to use. Preservation is uplifted by maintaining the nutritional and physicochemical properties of fruits with the effectiveness of essential oils. The essential oil contains antioxidant, antimicrobial, flavor, and probiotic properties. The utilization of essential oil in the edible coating has increased the property of coating. This review includes the process of extraction, potential benefits and applications of essential oils in food industry.

Evaluation of cooking characteristics, textural, structural and bioactive properties of button mushroom and chickpea starch enriched noodles.

The present study was conducted out to develop nutritionally enriched noodles by supplementing wheat flour with mushroom and chickpea starch at different concentrations and its effect on physico-chemical, bioactive, cooking, microbial and sensory properties, morphological and textural properties has been investigated. The prepared noodles contained high levels of protein, and low levels of carbohydrate, energy with the incorporation of mushroom flour and chickpea starch concentration. The lightness (L*) (71.79-53.84) decreased and yellowness (b*) (19.33-31.36) and redness (a*) (1.91-5.35) increased with the incorporation of mushroom flour and chickpea starch. The optimum cooking time decreased while as the water absorption capacity and cooking loss increased with increase in mushroom flour and chickpea starch concentration. The microstructure study and textural properties depicted the clear picture of protein network, with smooth outer surface, and the decrease in hardness with increased concentration of mushroom flour and chickpea starch. XRD and DSC results revealed that the prepared noodles contained more complete crystallites and high fraction of crystalline region and the linear increase in the gelatinization temperature with increase in composite flour concentration. The microbial analysis of noodles showed the decrease in microbial growth with the incorporation of composite flour.

Cold plasma treatment advancements in food processing and impact on the physiochemical characteristics of food products.

Cold plasma processing is a nonthermal approach that maintains food quality while minimizing the effects of heat on its nutritious qualities. Utilizing activated, highly reactive gaseous molecules, cold plasma processing technique inactivates contaminating microorganisms in food and packaging materials. Pesticides and enzymes that are linked to quality degradation are currently the most critical issues in the fresh produce industry. Using cold plasma causes pesticides and enzymes to degrade, which is associated with quality deterioration. The product surface characteristics and processing variables, such as environmental factors, processing parameters, and intrinsic factors, need to be optimized to obtain higher cold plasma efficiency. The purpose of this review is to analyse the impact of cold plasma processing on qualitative characteristics of food products and to demonstrate the effect of cold plasma on preventing microbiological concerns while also improving the quality of minimally processed products.

Effect of polyvinyl acetate (PVAc) based coating on quality characteristics of capsicum during storage.

The effect of PVAc (Polyvinyl acetate) coating on various characteristics of capsicum was determined during postharvest storage at room temperature (30 ± 1 °C) and refrigeration temperature (10 ± 1 °C). Food grade PVAc was used to make different coating formulations (2.5, 5, 7.5, 10 and 12.5%) by dissolving alcohol-water mixtures. After coating, the samples were stored at room temperature (30 ± 1 °C) and refrigeration temperature (10 ± 1 °C) for a comparative study. Various physicochemical parameters viz. weight loss, TSS, acidity, chlorophyll, pH, ascorbic acid, and color were analyzed every three days of storage till spoilage. Results revealed that the physicochemical characteristics and the quality of the bell peppers were improved by coating treatments at both the storage conditions. PVAc concentrations of 10 and 12.5% performed better than other PVAc coatings in retaining the chlorophyll and water content, which ultimately increased the shelf life of capsicum without significantly affecting its green color. The coating reduced the weight loss and color change, maintained total soluble solids, titratable acidity, pH over the storage period. About 40-50% less weight loss was observed in case of higher PVAc coating concentrations (10 and 12%). Therefore, the present study results suggested that PVAc coating can maintain postharvest storage quality of capsicum at 30 ± 1 °C and 10 ± 1 °C storage conditions.

Microwave assisted fluidized bed drying of bitter gourd: Modelling and optimization of process conditions based on bioactive components.

Bitter gourds were dried under varied drying conditions in a microwave assisted fluidized bed dryer, and the process was optimized using response surface methodology. Microwave power, temperature and air velocity were used as process variables for drying and the process parameters were varied between 360 and 720 W, 40-60 °C and 10-14 m/s, respectively. The responses determined for deciding the optimal criteria were vitamin C, total phenolics, IC50, total chlorophyll content, vitamin A content, rehydration ratio, hardness and total color change of the dried bitter gourd. Statistical analyses were done by using response surface methodology, which showed that independent variables affected the responses to a varied extent. The optimum drying conditions of 550.89 W microwave power, 55.87 °C temperature, and 13.52 m/s air velocity were established for microwave assisted fluidized bed drying to obtain highest desirability for the dried bitter gourd. At optimum conditions, validation experiment was done to ensure the suitability of models. Temperature and drying time plays an important role in the deterioration of bioactive components. Faster and shorter heating led to the greater retention of bioactive components. Taking the aforesaid results into consideration, our study recommended MAFBD as a promising technique with minimum changes in quality attributes of bitter gourd.

Recent Insights on the Role of Various Food Processing Operations Towards the Development of Sustainable Food Systems.

Chronic hunger and malnutrition will eventually result from the population's rapid growth. It is unlikely to succeed in tackling the rising challenges of delivering sustainable food for all people unless high attention is paid on the function of food processing to ensure the supply of stable food. It is impossible to overstate the importance of developing food processing and preservation technologies that can reduce food losses and wastage during surplus seasons. Therefore, sustainable food systems must be developed to provide healthy diets without damaging our world and its resources. The goal is to use various perspectives to confirm why food processing is crucial to future food supply. It is important to show the appropriate utilization of sustainability factors and effect assessments to construct for feeding the globe while staying within planetary limits. There has never been a better time to assure a plentiful food supply to feed the people than right now, when the population is expanding at a worrying rate. The sustainable food project seeks to move the food systems in a long-term, more equitable direction. Food processing, or the conversion of raw materials into functional, edible, and consumer acceptable food, is a critical link in the food value chain between consumption and production. This review looked at various existing and emerging food processing followed by preservation techniques. Food systems must also attempt to reduce food waste and losses, as well as the current and future impacts on the environment and society, to be sustainable.

Cold plasma: a promising technology for improving the rheological characteristics of food.

At the beginning of the 21st century, many consumers show interest in purchasing safe, healthy, and nutritious foods. The intent requirement of end-users and many food product manufacturers are trying to feature a new processing technique for the healthy food supply. The non-thermal nature of cold plasma treatment is one of the leading breakthrough technologies for several food processing applications. The beneficial response of cold plasma processing on food quality characteristics is widely accepted as a substitution technique for new food manufacturing practices. This review aims to elaborate and offer crispy innovative ideas on cold plasma application in various food processing channels. It highlights the scientific approaches on the principle of generation and mechanism of cold plasma treatment on rheological properties of foods. It provides an overview of the behavior of cold plasma in terms of viscosity, crystallization, gelatinization, shear stress, and shear rate. Research reports highlighted that the cold plasma treated samples demonstrated a pseudoplastic behavior. The published literatures indicated that the cold plasma is a potential technology for modification of native starch to obtain desirable rheological properties. The adaptability and environmentally friendly nature of non-thermal cold plasma processing provide exclusive advantages compared to the traditional processing technique.

Effect of incorporation of wheat bran, rice bran and banana peel powder on the mesostructure and physicochemical characteristics of biscuits.

Various types of natural fiber-rich ingredients are added into bakery-based products to improve their fiber content for health promotional purposes. But the majority of these products usually include exotic dietary fiber components. The aim of this study was to develop biscuits incorporated with wheat bran, rice bran and banana peel powder and to evaluate the effects on physicochemical properties and sensory acceptability of these different biscuit samples. Wheat bran, rice bran and banana peel powder was used to substitute refined wheat flour in biscuit samples at different levels (0, 5, 10, 15, 20, 25, and 30%). The effect of wheat bran, rice bran and banana peel powder incorporation on proximate composition, physical characteristics, texture profile, color and sensory evaluation of biscuit samples were investigated. The moisture content of the product showed a significant (p ≤ 0.01) decreasing trend while as protein showed increasing trend with increasing level of incorporation of wheat bran, rice bran and banana peel powder. Also there was a considerable effect on L*(darkness to lightness), a*(greeness to redness), and b*(blueness to yellowness) values of biscuit samples. Among the physical parameters diameter and thickness decreased non-significantly (p ≤ 0.01) with the addition of different fibers whereas spread ratio and weight increases. Sensory attributes showed a significant (p ≤ 0.01) increasing trend with an increase in the level of incorporation of different fibers. Based on sensory evaluation biscuits prepared with 15% wheat bran, 15% rice bran, and 10% banana peel powder were rated best. The biscuits were packed in high density polyethylene (HDPE) boxes and were analyzed on different intervals viz. 0, 30, and 60th day. In samples of optimized biscuits, the ash content, protein, fat and color exhibited a non- significant tendency of declining over storage. It was discovered that the ash content dropped from0.86 to 0.67% in Wb4, 0.95 to 0.75% in Rb4, and 1.15to 0.92% in Bpp3. However there was a considerable increase in moisture content during storage.

Promising bioactive properties of quercetin for potential food applications and health benefits: A review.

Naturally occurring phytochemicals with promising biological properties are quercetin and its derivatives. Quercetin has been thoroughly studied for its antidiabetic, antibacterial, anti-inflammatory, anti-Alzheimer's, anti-arthritic, antioxidant, cardiovascular, and wound-healing properties. Anticancer activity of quercetin against cancer cell lines has also recently been revealed. The majority of the Western diet contains quercetin and its derivatives, therefore consuming them as part of a meal or as a food supplement may be sufficient for people to take advantage of their preventive effects. Bioavailability-based drug-delivery systems of quercetin have been heavily studied. Fruits, seeds, vegetables, bracken fern, coffee, tea, and other plants all contain quercetin, as do natural colors. One naturally occurring antioxidant is quercetin, whose anticancer effects have been discussed in detail. It has several properties that could make it an effective anti-cancer agent. Numerous researches have shown that quercetin plays a substantial part in the suppression of cancer cells in the breast, colon, prostate, ovary, endometrial, and lung tumors. The current study includes a concise explanation of quercetin's action mechanism and potential health applications.

A comprehensive review on clove (Caryophyllus aromaticus L.) essential oil and its significance in the formulation of edible coatings for potential food applications.

Many studies have demonstrated the use of synthetic preservatives and chemical additives in food is causing poisoning, cancer, and other degenerative disorders. New solutions for food preservation with quality maintenance are currently emerging. As a result, public concern has grown, as they desire to eat healthier products that use natural preservatives and compounds rather than synthetic ones. Clove is a highly prized spice used as a food preservative and for a variety of therapeutic reasons. Clove essential oil and its principal active component, eugenol, indicate antibacterial and antifungal action, aromaticity, and safety as promising and valuable antiseptics in the food sector. Clove essential oil and eugenol are found to have strong inhibition effects on a variety of food-source bacteria, and the mechanisms are linked to lowering migration and adhesion, as well as blocking the creation of biofilm and various virulence factors. This review emphasizes the importance of CEO (clove essential oil) in the food industry and how it can be explored with edible coatings to deliver its functional properties in food preservation.

Effect of Maltodextrin and Soy Protein Isolate on the Physicochemical and Flow Properties of Button Mushroom Powder.

In this investigation, the effect of different drying techniques, such as freeze-drying and cabinet drying, with two different carrier agents, such as maltodextrin (MD) and soy protein isolate (SPI), at different levels (10, 15, and 20%) on button mushrooms has been revealed. The results showed that the button mushroom powders (BMPs) formulated with SPI as a carrier agent had significantly higher powder yield, hygroscopicity, L *, a *, and b * values, whereas BMP formulated with MD had significantly higher water activity, solubility index, tapped density, bulk density, and flowability. The highest retention of bioactive compounds was reported in freeze-dried mushroom powder compared to cabinet dried powder using SPI as a carrier agent. Fourier transform infrared (FTIR) analysis confirmed that certain additional peaks were produced in the mushroom button powder-containing SPI (1,035-3,271 cm-1) and MD (930-3,220 cm-1). Thus, the results revealed that SPI showed promising results for formulating the BMP using the freeze-drying technique.

Utilization of Fruit Seed-Based Bioactive Compounds for Formulating the Nutraceuticals and Functional Food: A Review.

Fruit seeds include a large number of bioactive substances with potential applications in the culinary and pharmaceutical industries, satisfying current demands for natural ingredients, which are generally preferred since they have fewer adverse effects than artificial components. Researchers have long been interested in the functional features, as well as the proximate and mineral compositions, of diverse fruit seeds such as tomato, apple, guava, and dates, among others. Bioactive components such as proteins (bioactive peptides), carotenoids (lycopene), polysaccharides (pectin), phytochemicals (flavonoids), and vitamins (-tocopherol) are abundant in fruit by-products and have significant health benefits, making them a viable alternative for the formulation of a wide range of food products with significant functional and nutraceutical potential. This article discusses the role and activities of bioactive chemicals found in tomato, apple, dates, and guava seeds, which can be used in a variety of food forms to cure a variety of cardiovascular and neurological disorders, as well as act as an antioxidant, anticancer, and antibacterial agent. The extraction of diverse bioactive components from by-products could pave the path for the creation of value-added products from the fruit industry, making it more commercially viable while also reducing environmental pollution caused by by-products from the fruit industry.

Extraction of Gelatin From Poultry Byproduct: Influence of Drying Method on Structural, Thermal, Functional, and Rheological Characteristics of the Dried Gelatin Powder.

The poultry processing industrial wastes are rich sources of gelatin protein, which can be utilized for various industrial sectors. The present investigation was conducted to evaluate the effect of freeze-drying (FD) and hot air drying (HAD) on the physicochemical, structural, thermal, and functional characteristics of chicken feet gelatin. The yield (%) of extracted FD and HAD gelatin was 14.7 and 14.5%, respectively. The gelatin samples showed lower percent transmittance in the UV region. The FTIR bands were at 3,410-3,448 cm-1, 1,635 cm-1, 1,527-334 cm-1, and 1,242-871 cm-1 representing amide-A, amide-I, amide-II, and amide-III bands, respectively. The water activity of HAD was higher (0.43) than in FD (0.21) samples and pH were 5.23 and 5.14 for HAD and FD samples, respectively. The flow index (n) of 6.67% gelatin solutions was 0.104 and 0.418 with consistency coefficient (k) of 37.94 and 31.68 for HAD and FD samples, respectively. The HAD sample shows higher gel strength (276 g) than the FD samples (251 g). The foaming capacity (FC) and foaming stability (FS) of FD samples were 81 and 79.44% compared to 62 and 71.28% for HAD, respectively. The emulsion capacity and emulsion stability of HAD gelatin were higher at 53.47 and 52.66% than FD gelatin. The water holding capacity (WHC) and oil binding capacity (OBC) of FD were lower, that is, 14.3 and 5.34 mL/g compared to HAD gelatin having 14.54 and 6.2 mL/g WHC and OBC, respectively. Hence, the present study indicated that gelatin samples can be utilized in various food products for enhancing functionality and can be used for developing edible packaging materials.