RESUMO
The development of optical and photonic applications using soft-matter droplets holds great scientific and application importance. The machining of droplet structures is expected to drive breakthroughs in advancing frontier applications. This review highlights recent advancements in micro-nanofabrication techniques for soft-matter droplets, encompassing microfluidics, laser injection, and microfluidic 3D printing. The principles, advantages, and weaknesses of these technologies are thoroughly discussed. The review introduces the utilization of a phase separation strategy in microfluidics to assemble complex emulsion droplets and control droplet geometries by adjusting interfacial tension. Additionally, laser injection can take full advantage of the self-assembly properties of soft matter to control the spontaneous organization of internal substructures within droplets, thus providing the possibility of high-precision customized assembly of droplets. Microfluidic 3D printing demonstrates a 3D printing-based method for machining droplet structures. Its programmable nature holds promise for developing device-level applications utilizing droplet arrays. Finally, the review presents novel applications of soft-matter droplets in optics and photonics. The integration of processing concepts from microfluidics, laser micro-nano-machining, and 3D printing into droplet processing, combined with the self-assembly properties of soft materials, may offer novel opportunities for processing and application development.
RESUMO
Double emulsions are of great importance for both science and engineering. However, the production of multicore double-emulsion droplets is challenging and normally requires sophisticated microfluidic devices, which limits their availability to broader communities. Here, we propose a simple, precise, and scalable batch method for producing double emulsions with monodispersed multicores at milliliter per minute rates, using the most common means in laboratory, temperature. By rapidly cooling liquid crystal emulsions, the introduced temperature gradient around the emulsion droplets leads to the injection of monodispersed guest droplets to form double-emulsion droplets. The number of injected water droplets can be precisely controlled by adjusting the thermally induced mechanical force through the temperature difference and the cooling rate. In contrast to conventional microfluidic fabrication, this method processes all emulsion droplets simultaneously in a noncontact and in situ manner. Therefore, it has great flexibility, allows multiple processing of double emulsions of arbitrary shape, has good capacity for mass production, and offers excellent compatibility with technologies such as microfluidics. Finally, we demonstrate that temperature changes can also be used to release the inner droplets from the double emulsion. The proposed method offers a reversible tool for processing double emulsions with minimal cost and expertise and is applicable to droplet-based microsystems in materials science, photonics, sensors, pharmaceuticals, and biotechnology.
RESUMO
Structural health monitoring is currently a crucial measure for the analysis of structural safety. As a structural asset management approach, it can provide a cost-effective measure and has been used successfully in a variety of structures. In recent years, the development of fiber optic sensing technology and vision sensing technology has led to further advances in structural health monitoring. This paper focuses on the basic principles, recent advances, and current status of applications of these two sensing technologies. It provides the reader with a broad review of the literature. It introduces the advantages, limitations, and future directions of these two sensing technologies. In addition, the main contribution of this paper is that the integration of fiber optic sensing technology and vision sensing technology is discussed. This paper demonstrates the feasibility and application potential of this integration by citing numerous examples. The conclusions show that this new integrated sensing technology can effectively utilize the advantages of both fields.
RESUMO
Processing of mesoscale structures of soft matter and liquid is of great importance in both science and engineering. In this work, we introduce the concept of laser-assisted micromachining to this field and inject a certain number of microdroplets into a preselected location on the surface of a liquid crystal drop through laser irradiation. The impact of laser energy on the triggered injection is discussed. The sequentially injected microdroplets are spontaneously captured by the defect ring in the host drop and transported along this defect track as micro-cargos. By precisely manipulating the laser beam, the tailored injection of droplets is achieved, and the injected droplets self-assemble into one necklace ring within the host drop. The result provides a bottom-up approach for the in-situ and three-dimensional microfabrication of droplet structure of soft matter using a laser beam, which may be applicable in the development of optical and photonic devices.
RESUMO
Microfabrication of complex double emulsion droplets with controlled substructures, which resemble biological cells, is an important but a highly challenging subject. Here, a new approach is proposed based on laser-induced injection of water nanodroplets into a liquid crystal (LC) drop. In contrast to the conventional top-down microfluidic fabrication, this method employs a series of bottom-up strategies such as nanodroplet injection, spontaneous and assisted coalescence, elastically driven actuation, and self-assembly. Each step is controlled precisely by adjusting the laser beam, interfacial tension, and its gradients, surface anchoring, and elasticity of the LC. Whispering gallery mode illumination is used to monitor the injection of droplets. A broad spectrum of double emulsions with a predesigned hierarchical architecture is fabricated and reconfigured by temperature, laser-induced coalescence, and injection. The proposed bottom-up method to produce customized microemulsions that are responsive to environmental cues can be used in the development of drug delivery systems, biosensors, and functional soft matter microstructures.
RESUMO
Chiral nematic droplets exhibit abundant topological defect structures, which have been intensively studied, both theoretically and experimentally. However, to observe and reconstruct the exact shape of three-dimensional (3D) defect structures has been a challenging task. In this study, we successfully reconstruct the 3D defect structures within a CLC microsphere with long helical pitches by combining polarized optical microscopy (POM) and laser scanning type fluorescence confocal polarizing microscopy (FCPM). The obtained confocal stack images provide us with the vertical location of disclination defects, to allow reconstruction of the full 3D structures. The reconstructed 3D structures can be viewed from different directions, providing a better understanding of the topological structure. Moreover, the defect lines are identified to be + 1 defects, different from the previous prediction. Thus, FCPM provides an excellent tool to study the complex topological configuration in microspheres, and fosters its potential applicability in new devices based on topologically structured soft media.