Hyperactivation of crosslinked lipases in elastic hydroxyapatite microgel and their properties.

Effective enzyme stabilization through immobilization is essential for the functional usage of enzymatic reactions. We propose a new method for synthesizing elastic hydroxyapatite microgel (E-HAp-M) materials and immobilizing lipase using this mesoporous mineral via the ship-in-a-bottle-neck strategy. The physicochemical parameters of E-HAp-M were thoroughly studied, revealing that E-HAp-M provides efficient space for enzyme immobilization. As a model enzyme, lipase (LP) was entrapped and then cross-linked enzyme structure, preventing leaching from mesopores, resulting in highly active and stable LP/E-HAp-M composites. By comparing LP activity under different temperature and pH conditions, it was observed that the cross-linked LP exhibited improved thermal stability and pH resistance compared to the free enzyme. In addition, they demonstrated a 156% increase in catalytic activity compared with free LP in hydrolysis reactions at room temperature. The immobilized LP maintained 45% of its initial activity after 10 cycles of recycling and remained stable for over 160 days. This report presents the first demonstration of a stabilized cross-linked LP in E-HAp-M, suggesting its potential application in enzyme-catalyzed processes within biocatalysis technology.

Development of cross-linked glucose oxidase integrated Cu-nanoflower electrode for reusable and stable glucose sensing.

The demand for glucose-sensing devices has increased along with the increasing diabetic population. Here, we aimed to construct a system with a glucose oxidase (GOx)-integrated Cu-nanoflower (Cu-NF) as the underlying electrode. This novel system was successfully developed by creating a cross-linked GOx within a Cu-NF matrix, forming a c-GOx@Cu-NF-coated film on a carbon screen-printed electrode (CSPE). A comparison of the stabilities of the cross-linking methods demonstrated enhanced durability, with an activity level of >88 % maintained after approximately 35 days of storage in room temperature buffer. Regarding the ability of the c-GOx@Cu-NF modified CSPE to detect glucose via electrochemical methods, the redox potential gap (ΔE) and peak current increased in the presence of GOx. In comparison to that of glucose, the sensitivity of c-GOx@Cu-NF was approximately 8 times greater than that of GOx@Cu-NF, with a detection limit of 0.649 µM and a linear range of 5-500 µM. It sustained an average relative activity of 80 % over 20 days. After 10 cycles of repeated use, the activity remained above 75 %. In terms of evaluating the electrode's specificity for glucose, the detection rate for individual similar substances was approximately 1 %. The introduction of a crosslinking strategy to Cu-NF, leading to enhanced mechanical stability and conductivity, improved the detection capability. Furthermore, this approach led to increased long-term storage stability and reusability, allowing for specific glucose detection. To our knowledge, this report represents the first demonstration of a c-GOx@Cu-NF system for integrating electrochemical biosensing devices into digital healthcare pathways, offering enhanced sensing accuracy and mechanical stability.

Correction: Hybrid protein microspheres and their responsive release behaviors and inhibitory effects on melanin synthesis.

Correction for 'Hybrid protein microspheres and their responsive release behaviors and inhibitory effects on melanin synthesis' by Ee Taek Hwang et al., Biomater. Sci., 2024, https://doi.org/10.1039/d4bm00106k.

Draft genome sequence of Magnusiomyces sp. LA-1 isolated from a C6-C8 acid-producing bioreactor.

Here, we report the draft genome of Magnusiomyces sp. LA-1, which was isolated from a C6-C8 carboxylic acid-producing bioreactor. The draft genome of Magnusiomyces sp. LA-1 is 19,829,165 bp in length, is divided into six contigs that comprise 6,557 CDS regions, and has a GC content of 34.5%.

Hybrid protein microspheres and their responsive release behaviors and inhibitory effects on melanin synthesis.

In this study, the formation of protein microspheres through lysosomal enzyme-assisted biomineralized crystallization was demonstrated. Spherical micro-sized hybrid CaCO3 constructs were synthesized and characterized using field-emission scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and particle size analysis. Additionally, parameters such as the Brunauer-Emmett-Teller surface area and single-point total pore volume, and adsorption/desorption analysis were used to investigate the mesoporous properties, which are advantageous for lysosomal enzyme (LE) loading. A LE can be used as an organic template, not only as a morphological controller but also for entrapping LE during the crystallization pathway. The hybrid protein microspheres accommodated 2.3 mg of LE with a 57% encapsulation efficiency and 5.1 wt% loading. The peroxidase activity of the microspheres was calculated and found to be approximately 0.0238 mM-1 min-1. pH-responsive release of the LE from CaCO3 was observed, suggesting potential biomedical and cosmetic applications in acidic environments. The hybrid LE microsphere treatment significantly alleviated melanin production in a dose-dependent manner and further downregulated the mRNA expression of MITF, tyrosinase, TYRP-1, and TYRP-2. These results indicate skin-whitening effects by inhibiting melanin without inducing cytotoxicity. The data provide the first evidence of the potential use of a LE for obtaining hybrid minerals and the effectiveness of biomineralization-based sustainable delivery of enzyme-based vehicles based on organelle-extract-assisted biomineralization.

Group selective aptamers: Broad-spectrum recognition of target groups in Cronobacter species and implementation of electrochemical biosensors as receptors.

Aptamers are a versatile class of receptors with a high affinity and selectivity for specific targets. Although their ability to recognize individual targets has been extensively studied, some scenarios require the development of receptors capable of identifying all target groups. This study investigated the use of aptamers to achieve the broad-spectrum recognition of groups instead of individual targets. Aptamers were screened for selectively distinct groups of Cronobacter species associated with foodborne diseases. Seven Cronobacter spp. were divided into Group A (C. sakazakii, C. malonaticus, C. turicensis, and C. muytjensii) and Group B (C. dublinensis, C. condimenti, and C. universalis). Aptamers with exclusive selectivity for each group were identified, allowing binding to the species within their designated group while excluding those from the other group. The screened aptamers demonstrated reliable affinity and specificity with dissociation constants ranging from 1.3 to 399.7 nM for Group A and 4.0-24.5 nM for Group B. These aptamers have also been successfully employed as receptors in an electrochemical biosensor platform, enabling the selective detection of each group based on the corresponding aptamer (limit of detection was 7.8 and 3.2 CFU for Group A and Group B, respectively). The electrochemical sensor effectively detected the extent of infection in each group in powdered infant formula samples. This study highlights the successful screening and application of group-selective aptamers as sensing receptors, emphasizing their potential for diverse applications in different fields such as food safety, environmental monitoring, and clinical diagnostics, where the selective biosensing of target groups is crucial.

Management of the poultry red mite Dermanyssus gallinae with physical control methods by inorganic material and future perspectives.

Poultry red mite (PRM), the ectoparasitic mite Dermanyssus gallinae found in laying hen farms, is a significant threat to poultry production and human health worldwide. It is a suspected disease vector and attacks hosts' other than chickens, including humans, and its economic importance has increased greatly. Different strategies to control PRM have been widely tested and investigated. In principle, several synthetic pesticides have been applied to control PRM. However, recent alternative control methods to avoid the side effects of pesticides have been introduced, although many remain in the early stage of commercialization. In particular, advances in material science have made various materials more affordable as alternatives for controlling PRM through physical interactions between PRM. This review provides a summary of PRM infestation, and then includes a discussion and comparison of different conventional approaches: 1) organic substances, 2) biological approaches, and 3) physical inorganic material treatment. The advantages of inorganic materials are discussed in detail, including the classification of materials, as well as the physical mechanism-induced effect on PRM. In this review, we also consider the perspective of using several synthetic inorganic materials to suggest novel strategies for improved monitoring and better information regarding treatment interventions.

Activation of crosslinked lipases in mesoporous silica via lid opening for recyclable biodiesel production.

Lipases catalyze a wide range of industrially important reactions, including the transesterification of triglycerides with alcohols for biodiesel production, and the stabilization of lipases are critical to achieve their recycled uses. Here, nanoscale enzyme reactor (NER) of lipase from Rhizopus oryzae (LP) was prepared via a simple two-step process, comprising of enzyme adsorption into magnetically-separable mesoporous silica and follow-up crosslinking of adsorbed enzymes. In aqueous phase, the specific hydrolysis activity of NER-LP was 4.7 times lower than that of free LP. On the other hand, however, the specific transesterification activity of NER-LP (130.4 µmol/min/mg LP) in organic phase for biodiesel production was 50 times higher than that of free LP (2.6 µmol/min/mg LP). These results reveal that the enzyme crosslinking for the preparation of NER does not interfere with the interfacial activation of LP molecules, opening the lid of LP active site under an optimal hydrophobic environment provided by the combination of organic solvent and mesoporous silica. Magnetic separation and optimized washing protocol facilitated the recycled uses of NER-LP. Highly stable and active NER-LP in magnetically-separable mesoporous silica has demonstrated its great potentials as an environmentally-friendly nanobiocatalyst for various lipase applications, including plasticizers, biosurfactants, functional fatty acids, as well as recyclable biodiesel production.

Protective Effects of Topical Application of Nitrite on Testicular Ischemia-Reperfusion Injury in Rats.

Testicular torsion is a urologic emergency induced by torsion of the spermatic cord, interrupting blood circulation to the testis. Therapeutic options for testicular torsion, except surgical restoration of testis, are rarely applied in clinical practice. This study, therefore, investigated whether topical application of nitrite (NO2 -) is beneficial in tissue damage due to testicular ischemia-reperfusion (I/R) injury in rats. Pubertal Sprague-Dawley rats were assigned to seven groups: group A, sham-operated control group; group B, I/R with no treatment; groups C, D, and E, I/R followed by treatment with three different doses of nitrite; group F, I/R followed by administration of nitrite and a NO scavenger, C-PTIO (2-(4-carboxyphenyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide potassium salt); and group G, I/R followed by administration of nitrate (NO3 -). Unilateral testicular ischemia was maintained for 5 h, followed by reperfusion for 24 h. Nitrite and nitrate were topically administered before reperfusion. Compared to group A, germ cell apoptosis, oxidative stress, antioxidant enzymatic function, and lipid peroxidation were significantly increased, along with abnormal morphology and impaired spermatogenesis in group B (P < 0.05). In contrast, testicular damage was generally attenuated in the nitrite treatment groups due to a reduction in superoxide and peroxynitrite levels and the inhibition of caspase-3-dependent apoptosis (P < 0.05 vs. group B). These therapeutic effects of nitrite-derived NO were suppressed after injection of C-PTIO, which showed in group F. Taken together, our results demonstrate that topical application of nitrite may be one of the therapeutic strategies for testicular ischemia-reperfusion injury.

Biomineralized separation, concentration, and evaluation of the effectiveness of Schisandra chinensis fruit extract.

Here, we detail the biomineralization-assisted separation and concentration of crude food extract and an evaluation of its effectiveness. Schisandra chinensis fruit extract was used as a model plant extract. Hybrid grape-like mineral was assembled by calcium carbonate mineralization. The hybrid particles of S. chinensis mineral were fully characterized using field emission scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, and particle size analysis. Data including the Brunauer-Emmett-Teller surface area, single point total pore volume, and adsorption/desorption analysis of pore size were also investigated. Organic molecules, including lipids such as palmitic acid, stearic acid, and linolenic acid in the Schisandra chinensis fruit, affect the formation of complex structures involving the CaCO3 mineralization pathway by inhibiting crystallization. However, the cosmetic active primary components were entrapped in a similar proportion in the preserved extract, and were efficiently separated without additional filtering and concentration steps for purification. In addition, the hybrid mineral was enriched (10.5 times) in Gomisin N, a representative component of S. chinensis fruit, relative to its concentration in the initial extract samples. The hybrid mineral inhibited both intracellular and extracellular melanin production and increased the 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity. The data provide the first evidence of the potential use of fruit extract for obtaining hybrid minerals and the effectiveness of the biomineralization-based separation and concentration strategy.

Evaluating enzyme stabilizations in calcium carbonate: Comparing in situ and crosslinking mediated immobilization.

Enzyme immobilization using inorganic materials has been shown to preserve enzyme activity improving and improve their practical applications in biocatalytic process designs. Proper immobilization methods have been used to obtain high recycling and storage stability. In this study, we compared the activity and stability of in situ or crosslink-immobilized enzymes in a CaCO3 biomineral carrier. More than 30% of the initial enzyme activity was preserved for both the systems after 180 days upon 15 activity measurements at room temperature, confirming the improved stability of these enzyme systems (100 mM phosphate buffer, pH 8.0); however, differences in enzyme loading, activity, and characteristics were observed for each of these methods. Each system exhibited efficacy of 80% and 20%, respectively. Based on the same amount of immobilized enzyme (0.2 mg), the specific activities of hydrolysis of p-nitrophenyl butyrate substrate at room temperature of in situ immobilized carboxyl esterase (CE) and crosslinked CE were 11.37 and 7.63 mM min-1 mg-1, respectively (100 mM phosphate buffer, pH 8.0). Moreover, based on the kinetic behavior, in situ immobilized CE exhibited improved catalytic efficiency (Vmax Km-1) of the enzyme, exhibiting 4-fold higher activity and efficiency values than those of the CE immobilized in CaCO3. This is the first study to describe the stabilization of enzymes in CaCO3 and compare the enzyme kinetics and efficiencies between in situ immobilization and crosslinking in CaCO3 carriers.

Melanin-Decolorizing Activity of Antioxidant Enzymes, Glutathione Peroxidase, Thiol Peroxidase, and Catalase.

Melanin is the most important factor to determine skin color. Many research efforts are being undertaken to decompose the already-produced melanin compounds in skin for beauty. This research investigated the effects on reducing melanin color of the three antioxidant enzymes, Glutathione peroxidase (GPX), Thiol peroxidase (TPX), and Catalase, in lysosomal fraction. Melanin solution was treated with the enzymes and hydrogen peroxide, then reacted for 48 h. GPX and TPX decolorized melanin, and between them, GPX was more efficient, but Catalase was not effective. GPX also inhibited the production of melanin in B16F10 melanoma cells. GPX, which is present in almost all microorganisms, plays an important role in the cellular defense mechanism by reactive oxygen species. In addition, it was not cytotoxic, but was significantly effective in decolorizing melanin color. Therefore, in the biological and microbiological field, its possibility of utilization in skin whitening cosmetic is high.

Highly Stable and Fine-Textured Hybrid Microspheres for Entrapment of Cosmetic Active Ingredients.

This study details the preparation and application of supramolecular host-guest inclusion complexes entrapping biomineralized microspheres for long-term storage and their pH-responsive behavior. The microspheres were assembled using a CaCO3 synthesis process coupled with cyclodextrin-tetrahydrocurcumin (CD-THC) inclusion complexes, forming fine-textured and mechanically stable hybrid materials. The products were successfully characterized using field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and particle size analysis (PSA). Various parameters such as the Brunauer-Emmett-Teller (BET) surface area, single point total pore volume, and pore size via adsorption/desorption analysis were also determined. The obtained THC-entrapped hybrid microspheres contained as high as 20 wt % THC loading and were very stable, preserving 90% of the initial concentration over four weeks of storage at different temperatures, largely limiting THC leaching and indicating high stability in a physiological environment. In addition, the pH-responsive release of THC from the hybrid microspheres was observed, showing potential use for application to weakly acidic skin surfaces. To our knowledge, this is the first demonstration of antiaging cosmetic formulation technology using biomineralization based on the co-synthesis of CaCO3 and CD-THC complexes.

Immobilization and Stabilization of Enzyme in Biomineralized Calcium Carbonate Microspheres.

Biomineralized uniform and well-organized calcium carbonate microspheres were synthesized for enzyme immobilization, and the immobilized enzyme was successfully stabilized. The physicochemical parameters of calcium carbonate were studied using scanning electron microscopy with energy-dispersive X-ray spectroscopy, particle size analysis, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, and surface area measurement. Additionally, Barrett-Joyner-Halenda adsorption/desorption analysis showed that the calcium carbonate microspheres provided efficient mesopore space for enzyme loading. As a model enzyme, carboxyl esterase (CE) was entrapped and then cross-linked to form an enzyme structure. In this aggregate, the cross-linked enzymes cannot leach out from mesopores, resulting in enzyme stability. The hydrolytic activities of the free and cross-linked enzymes were analyzed over broad temperature and pH ranges. The cross-linked enzyme displayed better activity than the free enzyme. Furthermore, the immobilized CE was found to be stable for more than 30 days, preserving 60% of its initial activity even after being reused more than 10 times. This report is expected to be the first demonstration of a stabilized cross-linked enzyme system in calcium carbonate microspheres, which can be applied in enzyme catalyzed reactions involved in bioprocessing, bioremediation, and bioconversion.

Towards compartmentalized photocatalysis: multihaem proteins as transmembrane molecular electron conduits.

The high quantum efficiency of natural photosynthesis has inspired chemists for solar fuel synthesis. In photosynthesis, charge recombination in photosystems is minimized by efficient charge separation across the thylakoid membrane. Building on our previous bioelectrochemical studies of electron transfer between a light-harvesting nanoparticle (LHNP) and the decahaem subunit MtrC, we demonstrate photo-induced electron transfer through the full transmembrane MtrCAB complex in liposome membranes. Successful photoelectron transfer is demonstrated by the decomposition of a redox dye, Reactive Red 120 (RR120), encapsulated in MtrCAB proteoliposomes. The photoreduction rates are found to be dependent on the identity of the external LHNPs, specifically, dye-sensitized TiO2, amorphous carbon dots (a-CD) and graphitic carbon dots with core nitrogen doping (g-N-CDs). Agglomeration or aggregation of TiO2 NPs likely reduces the kinetics of RR120 reductive decomposition. In contrast, with the dispersed a-CD and g-N-CDs, the kinetics of the RR120 reductive decomposition are observed to be faster with the MtrCAB proteoliposomes and we propose that this is due to enhancement in the charge-separated state. Thus, we show a proof-of-concept for using MtrCAB as a lipid membrane-spanning building block for compartmentalised photocatalysis that mimics photosynthesis. Future work is focused on incorporation of fuel generating redox catalysts in the MtrCAB proteoliposome lumen.

Bio-hybrid inorganic microparticles derived from CO2 for highly efficient and selective removal of antibiotics.

BACKGROUND: Antibiotics, which are the most important medication in human history, have brought global concerns due to their potential risk to human health and environment by accelerating the development of drug-resistant bacteria, and accumulating in the food chain system. Among antibiotics, oxytetracycline (OTC) is widely used in aquaculture, and its potential risk of toxicity to human by bioaccumulation has been reported. Therefore, the effective removal of OTC is highly needed. RESULTS: In this study, we report bio-hybrid inorganic microparticles (apt-mag-SiCC) for efficient capturing and facile magnet-based separation of oxytetracycline (OTC). These bio-hybrid inorganic microparticles are composed of magnetic separable silica coated calcium carbonate microparticles (mag-SiCC) derived from CO2, conjugated with oxytetracycline binding aptamers (OBA). These bio-hybrid inorganic microparticles were successfully synthesized, based on the characterization data obtained by SEM, FT-IR, EDAX, BET, and CLSM. About 6 µm sized bio-hybrid inorganic microparticles showed low non-specific adsorption to OTC and other molecules, and the selective capturing towards to the OTC in both buffer and tap water. Moreover, these bio-hybrid mineral microparticles were found to be stable, even after the repeated usages, maintaining the initial capturing efficiency. CONCLUSION: Using the newly synthesized bio-hybrid inorganic microparticles, we could successfully capture OTC by facile magnet-based separation. With advantages of theses bio-hybrid inorganic microparticles such as easy fabrication, low-price, and environmental friendliness, this novel material could be utilized in the drinking water treatment, in vitro medicinal diagnostics, or in vitro removal of antibiotics lining out from the blood (blood purification).

Exploring Step-by-Step Assembly of Nanoparticle:Cytochrome Biohybrid Photoanodes.

Coupling light-harvesting semiconducting nanoparticles (NPs) with redox enzymes has been shown to create artificial photosynthetic systems that hold promise for the synthesis of solar fuels. High quantum yields require efficient electron transfer from the nanoparticle to the redox protein, a property that can be difficult to control. Here, we have compared binding and electron transfer between dye-sensitized TiO2 nanocrystals or CdS quantum dots and two decaheme cytochromes on photoanodes. The effect of NP surface chemistry was assessed by preparing NPs capped with amine or carboxylic acid functionalities. For the TiO2 nanocrystals, binding to the cytochromes was optimal when capped with a carboxylic acid ligand, whereas for the CdS QDs, better adhesion was observed for amine capped ligand shells. When using TiO2 nanocrystals, dye-sensitized with a phosphonated bipyridine Ru(II) dye, photocurrents are observed that are dependent on the redox state of the decaheme, confirming that electrons are transferred from the TiO2 nanocrystals to the surface via the decaheme conduit. In contrast, when CdS NPs are used, photocurrents are not dependent on the redox state of the decaheme, consistent with a model in which electron transfer from CdS to the photoanode bypasses the decaheme protein. These results illustrate that although the organic shell of NPs nanoparticles crucially affects coupling with proteinaceous material, the coupling can be difficult to predict or engineer.

Photoreduction of Shewanella oneidensis Extracellular Cytochromes by Organic Chromophores and Dye-Sensitized TiO2.

The transfer of photoenergized electrons from extracellular photosensitizers across a bacterial cell envelope to drive intracellular chemical transformations represents an attractive way to harness nature's catalytic machinery for solar-assisted chemical synthesis. In Shewanella oneidensis MR-1 (MR-1), trans-outer-membrane electron transfer is performed by the extracellular cytochromes MtrC and OmcA acting together with the outer-membrane-spanning porin⋅cytochrome complex (MtrAB). Here we demonstrate photoreduction of solutions of MtrC, OmcA, and the MtrCAB complex by soluble photosensitizers: namely, eosin Y, fluorescein, proflavine, flavin, and adenine dinucleotide, as well as by riboflavin and flavin mononucleotide, two compounds secreted by MR-1. We show photoreduction of MtrC and OmcA adsorbed on RuII -dye-sensitized TiO2 nanoparticles and that these protein-coated particles perform photocatalytic reduction of solutions of MtrC, OmcA, and MtrCAB. These findings provide a framework for informed development of strategies for using the outer-membrane-associated cytochromes of MR-1 for solar-driven microbial synthesis in natural and engineered bacteria.

A decahaem cytochrome as an electron conduit in protein-enzyme redox processes.

The decahaem cytochrome MtrC from Shewanella oneidensis MR-1 was employed as a protein electron conduit between a porous indium tin oxide electrode and redox enzymes. Using a hydrogenase and a fumarate reductase, MtrC was shown as a suitable and efficient diode to shuttle electrons to and from the electrode with the MtrC redox activity regulating the direction of the enzymatic reactions.

A Decaheme Cytochrome as a Molecular Electron Conduit in Dye-Sensitized Photoanodes.

In nature, charge recombination in light-harvesting reaction centers is minimized by efficient charge separation. Here, it is aimed to mimic this by coupling dye-sensitized TiO2 nanocrystals to a decaheme protein, MtrC from Shewanella oneidensis MR-1, where the 10 hemes of MtrC form a ≈7-nm-long molecular wire between the TiO2 and the underlying electrode. The system is assembled by forming a densely packed MtrC film on an ultra-flat gold electrode, followed by the adsorption of approximately 7 nm TiO2 nanocrystals that are modified with a phosphonated bipyridine Ru(II) dye (RuP). The step-by-step construction of the MtrC/TiO2 system is monitored with (photo)electrochemistry, quartz-crystal microbalance with dissipation (QCM-D), and atomic force microscopy (AFM). Photocurrents are dependent on the redox state of the MtrC, confirming that electrons are transferred from the TiO2 nanocrystals to the surface via the MtrC conduit. In other words, in these TiO2/MtrC hybrid photodiodes, MtrC traps the conduction-band electrons from TiO2 before transferring them to the electrode, creating a photobioelectrochemical system in which a redox protein is used to mimic the efficient charge separation found in biological photosystems.