Directed Self-Assembly of Polystyrene-Block-Polyhedral Oligomeric Silsesquioxane Monolayer by Nano-Trench for Nanopatterning.

This work pioneers to combine fast self-assembly of polyhedral oligomeric silsesquioxanes (POSS) nanocage-based giant surfactants with high etching contrast and directed self-assembly for reliable long-range lateral order to create well-aligned sub-10 nm line nanopatterns via reactive ion etching (RIE). Polystyrene-block-oligo(dimethylsiloxane) substituted POSS (PS-b-oDMS7POSS) with seven oligo(dimethylsiloxane) at the corners of the POSS nanocage and one polystyrene (PS) tail is designed and synthesized as a giant surfactant with self-assembly behaviors like block copolymer (BCP). In contrast to BCP, oDMS7POSS gives a volume-persistent "nanoatom" particle with higher mobility for fast self-assembly and higher segregation strength with PS for smaller feature size. By taking advantage of directed self-assembly using nano-trench fabricated by electron beam lithography, well-ordered nanostructured monolayer with well-aligned parallel oDMS7POSS cylinders can be formed by confined self-assembly within the nano-trench. With the optimization of the RIE treatment using O2 as an etchant, the high etching contrast from the oDMS7POSS and PS gives the formation of well-defined line nanopatterns with sub-10 nm critical dimension that can serve as a mask for pattern transfer in lithography. These results demonstrate a cost-effective approach for nanopatterning by utilizing a creatively designed giant surfactant with sub-10 nm feature size and excellent etching contrast for modern lithographic applications.

Postvaccination serosurveillance of foot-and-mouth disease through virus-neutralizing and nonstructural protein antibody tests on pig farms in Taiwan: 2009-2020.

The use of virus-neutralizing (VN) and nonstructural protein (NSP) antibody tests in a serosurveillance program for foot-and-mouth disease (FMD) can identify pig herds that are adequately vaccinated, with a high percentage of pigs with VN positive antibody titers; these tests can also help identify pigs with NSP-positivity that have previously been or are currently infected even in vaccinated herds. To identify infected herds and manage infection, the combination of VN and NSP antibody tests was used in Taiwan's serosurveillance program implemented simultaneously with the compulsory FMD vaccination program. The result was the eradication of FMD: Taiwan was recognized by the World Organization for Animal Health as an FMD-free country without vaccination in 2020. Evaluation of the compulsory vaccination program incorporated in the FMD control program in Taiwan revealed that the vaccine quality was satisfactory and the vaccination program was effective during the period of compulsory vaccination (2010-2017). Sound immunological coverage was achieved, with 89.1% of pigs having VN antibody titers exceeding 1:16 in 2016. This level of immunological coverage would be expected to substantially reduce or prevent FMD transmission, which was borne out by the results of the NSP tests. We identified farms having positive NSP reactors (very low annual prevalence) before the cessation of FMD vaccination in July 2018; however, detailed serological and clinical investigations of pigs of all ages in suspect herds demonstrated that no farms were harboring infected animals after the second half of 2013. Thus, the results revealed no evidence of FMD circulation in the field, and Taiwan regained FMD-free status.

Risks after Gestational Diabetes Mellitus in Taiwanese Women: A Nationwide Retrospective Cohort Study.

OBJECTIVE: An increasing trend in the prevalence of gestational diabetes mellitus (GDM) has been reported in Taiwan. GDM has been linked to various adverse maternal outcomes over a long period, including cardiovascular disease (CVD) and chronic kidney disease (CKD). However, evidence implies that the effects of GDM on the mid-term surrogate risk factors for these diseases are limited. Furthermore, data from nationwide cohort studies are limited. The primary aim of this study was to investigate the risk of developing type 2 diabetes mellitus (T2DM), arterial hypertension (aHTN), and hyperlipidemia (HL) through a 5-year follow-up post-delivery of women with GDM in a nationwide cohort study in Taiwan. The second objective was to investigate the risk of developing insulin resistance syndrome (IRS)-related diseases, including CVD, acute myocardial infarction (AMI), peripheral artery occlusive disease (PAOD), non-alcoholic fatty liver diseases (NAFLD), and CKD. METHODS: This was a retrospective, population-based nationwide cohort study. The data source comprises a merge of the Birth Certificate Application Database (BCA) and the National Health Insurance Research Database in Taiwan. Women aged between 15 and 45 years who gave birth in Taiwan between 2004 and 2011 were included. Women who were enrolled and had a GDM diagnosis were assigned to the exposure group. Women who were enrolled without a GDM diagnosis were assigned to the comparison group. The relative risk of developing T2DM, aHTN, HL, and IRS-related diseases, including CVD, AMI, PAOD, NAFLD, and CKD, were analyzed and presented as hazard ratio (HR) through Cox regression and log-rank regression analyses. RESULTS: A total of 1,180,477 women were identified through the BCA database between 2004 and 2011. Of those, 71,611 GDM-diagnosed women and 286,444 women without GDM were included in the final analysis. After adjusting for age, pre-existing cancer, and parity, developing T2DM, aHTN, and HL were still significantly increased in the GDM group (HR and interquartile range (IQR): 2.83 (2.59, 3.08), 1.09 (1.01, 1.06), and 1.29 (1.20, 1.38), accordingly). CVD, NAFLD, and CKD had a very low incidence and showed insignificant results. CONCLUSION: Our findings provide nationwide cohort data showing that GDM increased the risk of developing T2DM, aHTN, and HL 5 years after delivery within the same group. The GDM complications and risk of CVD, AMI, PAOD, NAFLD, and CKD need further investigation.

The Use of Distinctive Monoclonal Antibodies in FMD VLP- and P1-Based Blocking ELISA for the Seromonitoring of Vaccinated Swine.

The serum neutralization (SN) test has been regarded as the "gold standard" for seroconversion following foot-and-mouth disease virus (FMDV) vaccination, although a high-level biosafety laboratory is necessary. ELISA is one alternative, and its format is constantly being improved. For instance, standard polyclonal antisera have been replaced by monoclonal antibodies (MAbs) for catching and detecting antibodies, and inactive viruses have been replaced by virus-like particles (VLPs). To the best of current knowledge, however, no researchers have evaluated the performances of different MAbs as tracers. In previous studies, we successfully identified site 1 and site 2 MAbs Q10E and P11A. In this study, following the established screening platform, the VLPs of putative escape mutants from sites 1 to 5 were expressed and used to demonstrate that S11B is a site 3 MAb. Additionally, the vulnerability of VLPs prompted us to assess another diagnostic antigen: unprocessed polyprotein P1. Therefore, we established and evaluated the performance of blocking ELISA (bELISA) systems based on VLPs and P1, pairing them with Q10E, P11A, S11B, and the non-neutralizing TSG MAb as tracers. The results indicated that the VLP paired with S11B demonstrated the highest correlation with the SN titers (R2 = 0.8071, n = 63). Excluding weakly positive serum samples (SN = 16-32, n = 14), the sensitivity and specificity were 95.65% and 96.15% (kappa = 0.92), respectively. Additionally, the P1 pairing with Q10E also demonstrated a high correlation (R2 = 0.768). We also discovered that these four antibodies had steric effects on one another to varying degrees, despite recognizing distinct antigenic sites. This finding indicated that MAbs as tracers could not accurately detect specific antibodies, possibly because MAbs are bulky compared to a protomeric unit. However, our results still provide convincing support for the application of two pairs of bELISA systems: VLP:S11B-HRP and P1:Q10E-HRP.

Ultra-thin Si-padded Si3N4 waveguides for low-loss photonics.

We proposed an ultra-thin Si-padded Si3N4 waveguide consisting of a very thin Si slab underneath a Si3N4 strip separated by a SiO2 layer. The Si slab and the Si3N4 strip form a hybrid waveguide mode, where the mode field is confined in these two structures. The measured waveguide propagation loss is 0.055 dB/cm, and the bending loss is 0.09 dB per 90° bend, depending on the bending radius. Because part of the waveguide mode is distributed in the Si slab, this waveguide structure has potential for implementing low-loss and high-speed photonic integrated circuits.

Near-infrared nanosecond-pulsed laser-activated highly efficient intracellular delivery mediated by nano-corrugated mushroom-shaped gold-coated polystyrene nanoparticles.

Here, an efficient intracellular delivery of molecules with high cell viability is reported using nanosecond-pulsed laser-activated plasmonic photoporation, mediated by high-aspect-ratio nano-corrugated mushroom-shaped gold-coated polystyrene nanoparticles (nm-AuPNPs) at near-infrared wavelength. Upon pulsed laser illumination, nm-AuPNPs exhibit greater plasmonic extinction than spherical AuPNPs, which increase their energy efficiency and reduce the necessary illumination of light, effectively controlling cell damage and improving the delivery efficiency. Nm-AuPNPs exhibit surface plasmon absorption at near infrared region with a peak at 945 nm. Pulsed laser illumination at this plasmon peak triggers explosive nanobubbles, which create transient membrane pores, allowing the delivery of dyes, quantum dots and plasmids into the different cell types. The results can be tuned by laser fluence, exposure time, molecular size and concentration of nm-AuPNPs. The best results are found for CL1-0 cells, which yielded a 94% intracellular PI dye uptake and ∼100% cell viability at 35 mJ cm-2 laser fluence for 945 nm wavelength. Thus, the presented approach has proven to have an inevitable potential for biological cell research and therapeutic applications.

Directed Self-Assembly of Star-Block Copolymers by Topographic Nanopatterns through Nucleation and Growth Mechanism.

Exploring the ordering mechanism and dynamics of self-assembled block copolymer (BCP) thin films under confined conditions are highly essential in the application of BCP lithography. In this study, it is aimed to examine the self-assembling mechanism and kinetics of silicon-containing 3-arm star-block copolymer composed of polystyrene (PS) and poly(dimethylsiloxane) blocks as nanostructured thin films with perpendicular cylinders and controlled lateral ordering by directed self-assembly using topographically patterned substrates. The ordering process of the star-block copolymer within fabricated topographic patterns with PS-functionalized sidewall can be carried out through the type of secondary (i.e., heterogeneous) nucleation for microphase separation initiated from the edge and/or corner of the topographic patterns, and directed to grow as well-ordered hexagonally packed perpendicular cylinders. The growth rate for the confined microphase separation is highly dependent upon the dimension and also the geometric texture of the preformed pattern. Fast self-assembly for ordering of BCP thin film can be achieved by lowering the confinement dimension and also increasing the concern number of the preformed pattern, providing a new strategy for the design of BCP lithography from the integration of top-down and bottom-up approaches.

Enhancing detection sensitivity of metallic nanostructures by resonant coupling mode and spectral integration analysis.

We report a simple method to efficiently improve the detection limit of surface plasmon resonance in periodic metallic nanostructures by using small angle illumination and spectral integration analysis. The large-area gold nanoslit arrays were fabricated by thermal-annealing template-stripping method with a slit width of 60 nm and period of 500 nm. The small angle illumination induced a resonant coupling between surface plasmon mode and substrate mode. It increased ~2.24 times intensity sensitivity at 5.5° incident angle. The small-angle illumination also resulted in multiple resonant peaks. The spectral integration method integrated all changes near the resonant peaks and increased the signal to noise ratio about 5 times as compared to single-wavelength intensity analysis. Combining both small angle and spectral integration, the detection limit was increased to one order of magnitude. The improvement of the detection limit for antigen-antibody interactions was demonstrated.

Application of strong transverse magneto-optical Kerr effect on high sensitive surface plasmon grating sensors.

A high sensitive sensor is demonstrated by exploiting strong transverse magneto-optical Kerr effect on a ferromagnetic surface plasmon grating. The surface plasmon grating, made of a hybridized Au/Fe/Au layer, exhibits a very dispersive Kerr parameter variation near the surface plasmon polariton (SPP) wavelength via coherent scattering of the SPP on the grating structure. Interrogating this Kerr parameter can be utilized for detecting chemical or biological objects in a fluid medium. The experiment results show the minimal detectable mass concentration of sodium chloride in a saline solution is 4.27 × 10(-3) %, corresponding to a refractive index change of 7.60 × 10(-6) RIU. For an avidin-biotin interaction experiment, the sensitivity of avidin detection in PBS solution is 1.97 nM, which is limited by the index fluctuation of flowing media during measurement.

Fringe-field carrier-depletion modulators with high modulation efficiency and low free carrier absorption.

A high-speed carrier-depletion silicon modulator based on a fringe field pn junction design is presented. Due to the strong fringe field, the size of heavily doped regions can be reduced and away from the waveguide core, whereas large modulation efficiency is still accomplishable. The VπL is 1.8 V-cm and the phase shifter loss is 1.3 dB/mm. The figure of merit (FOM), defined by the product of VπL and phase shifter loss, is estimated to be 23.4 dB-V. The modulation speed and depth are 11.8 GHz and 8.1 dB, respectively, which is mainly limited by the mobility of poly-Si.

A self-assembled microbonded germanium/silicon heterojunction photodiode for 25 Gb/s high-speed optical interconnects.

A novel technique using surface tension to locally bond germanium (Ge) on silicon (Si) is presented for fabricating high performance Ge/Si photodiodes. Surface tension is a cohesive force among liquid molecules that tends to bring contiguous objects in contact to maintain a minimum surface energy. We take advantage of this phenomenon to fabricate a heterojunction optoelectronic device where the lattice constants of joined semiconductors are different. A high-speed Ge/Si heterojunction waveguide photodiode is presented by microbonding a beam-shaped Ge, first grown by rapid-melt-growth (RMG) method, on top of a Si waveguide via surface tension. Excellent device performances such as an operating bandwidth of 17 GHz and a responsivity of 0.66 and 0.70 A/W at the reverse bias of -4 and -6 V, respectively, are demonstrated. This technique can be simply implemented via modern complementary metal-oxide-semiconductor (CMOS) fabrication technologies for integrating Ge on Si devices.

Tobacco use and environmental smoke exposure among Taiwanese pregnant smokers and recent quitters: risk perception, attitude, and avoidance behavior.

In this study, we conducted an empirical survey of the avoidance behaviors and risk perceptions of active and passive smoking pregnant smokers and recent quitters. We employed an online questionnaire survey by recruiting 166 voluntary participants from an online parenting community in Taiwan. The results of the empirical survey revealed that three-fourths of smokers quit smoking during pregnancy and one-fourth continued smoking. All pregnant women who continued smoking had partners or lived with relatives who smoked. Current smokers and quitters differed significantly in their risk perceptions and attitudes toward smoking during pregnancy. Most pregnant smokers and quitters adopted passive smoking avoidance behaviors at home and in public. Nevertheless, one-fifth of pregnant women chose not to avoid passive smoking. We concluded that most women stop smoking during pregnancy; however, most women continue to be exposed to passive-smoking environments. Perceived fetal health risks and attitudes toward smoking during pregnancy are critical predictors of the anti-smoking behaviors of pregnant women.

Development of a Luminex assay for the detection of swine antibodies to non-structural proteins of foot-and-mouth disease virus.

Foot-and mouth disease (FMD), swine vesicular disease (SVD), and vesicular stomatitis (VS) are highly contagious vesicular diseases of swine but are not easy to differentiate clinically. For the purpose of instant detecting of FMD and differentiating it from the other vesicular diseases, a Luminex assay was developed. Sera from 64 infected, 307 vaccinated, and 280 naïve pigs were tested by the Luminex assay. Diagnostic sensitivity of the assay was 100%. Diagnostic specificity of the assay was 98.7% in vaccinated pigs and 97.5% to 100% in naïve pigs. Agreement between the results from the Luminex assay and those from a 3ABC polypeptide blocking ELISA was 96.3% with kappa statistics of 0.92. The Luminex assay can detect the immune response to NSP-3ABC in swine as early as eight days post-infection. Moreover, all of the 15 vaccinated but unprotected pigs were all detected by the Luminex assay. The results indicated that the Luminex assay has potential with specificity in detecting antibodies to FMDV 3ABC NSP and in distinguishing FMDV-infected pigs from with either SVDV or VSV.

Optical bistability in a silicon nitride microring resonator with azo dye-doped liquid crystal as cladding material.

This investigation reports observations of optical bistability in a silicon nitride (SiN) micro-ring resonator with azo dye-doped liquid crystal cladding. The refractive index of the cladding can be changed by switching the liquid crystal between nematic (NLC) and photo-induced isotropic (PHI) states by. Both the NLC and the PHI states can be maintained for many hours, and can be rapidly switched from one state to the other by photo-induced isomerization using 532 nm and 408 nm addressing light, respectively. The proposed device exhibits optical bistable switching of the resonance wavelength without sustained use of a power source. It has a 1.9 nm maximum spectral shift with a Q-factor of over 10000. The hybrid SiN- LC micro-ring resonator possesses easy switching, long memory, and low power consumption. It therefore has the potential to be used in signal processing elements and switching elements in optically integrated circuits.

Cascaded nano-porous silicon for high sensitive biosensing and functional group distinguishing by Mid-IR spectra.

We present a chemical-biosensor in the Mid-IR range and based on cascaded porous silicon made on p- and n-type (100) silicon substrates of resistivities between 0.001Ωcm and 0.005Ωcm. The stacked porous layers of various porosities (20-80%) and thicknesses (5-9µm) are formed by successive electrochemical etchings with different current densities. Working with FTIR technique that possesses fast response, high sensitivity, and capability of detecting and identifying functional groups, the cascaded porous structures provided enhanced refractive index sensitivities and reduced detection limits in chemical and biodetection. The largest wavenumber shifts were 50cm(-1)/mM obtained for d-(+)-glucose and 96cm(-1)/µg/mL for Cy5-conjungated Rabbit Anti-Mouse IgG. The lowest detectable concentration of glucose was 80µM (1.4mg/mL) with PS porosity of 40% and thickness of about 9µm while it was 40ng/mL for Cy5-conjugated Rabbit Anti-Mouse IgG which is 2.5×10(5) folds better than those in literature.

Study of coupling loss on strongly-coupled, ultra compact microring resonators.

Small-radius microring resonators with large free spectral range (FSR) are of great interest for optical communication and optical interconnect applications. The resonator loss of a waveguide-coupled ring resonator, if the gap width between the microring and the bus waveguide is extremely small, can be significantly influenced by the coupling loss which corresponds to the microring operated in a strong coupling regime. This effect is particularly prominent for small radius microrings. We have studied the coupling loss with respect to the gap width on a waveguide-coupled microring both experimentally and theoretically, using two-dimensional (2D) finite difference time domain (FDTD) and effective index method (EIM).The coupling loss was confirmed by measuring transmission spectra of Si microring filters fabricated on silicon-on-insulator (SOI) wafers. Our experimental data show that the ring loss increases rapidly as the coupling gap decreases to less than 200 nm. The measured results show that the ring loss of a silicon microring with a radius of 2.75 µm is around 0.01382 dB/circumference as the gap width is greater than 325 nm, referred to as the intrinsic ring loss. However, for a smaller gap of 150 nm, the loss of the microring increases to 0.07084dB/circumference. The added ring loss is attributed to the coupling loss at small coupling gap for small radius ring.

Manipulation of micro-particles through optical interference patterns generated by integrated photonic devices.

Micro-particle transport and switch governed by guided-wave optical interference are presented. The optical interference, occurring in a directional coupler and a multi-mode interferometer made by inverted rib waveguides, results in a specific evanescent field dependent on wavelength. Through a detailed theoretical analysis, the field of induced optical force shows a correlative pattern associated with the evanescent field. Experimental results demonstrate that 10 µm polystyrene beads are propelled with a trajectory subject to the interference pattern accordingly. By launching different wavelengths, the polystyrene beads can be delivered to different output waveguide ports. Massive micro-particle manipulation is applicable.

Study of disklike microdroplet cavities directly coupled to liquid-core waveguides.

A design of microfluidic devices is presented to integrate single-mode, liquid-core waveguides with microfluidic channels that generate and deliver disklike emulsion microdroplet cavities doped with an organic dye. The microcavity modes can be directly coupled to the liquid waveguide. Cavity-enhanced spontaneous emission was observed at the waveguide with low pump pulse energy.

A critically coupled Germanium photodetector under vertical illumination.

We propose and study a practical design of a Germanium photodetector implemented on a Silicon-on-insulator substrate to reach the critical coupling regime under vertical illumination at 1310 nm wavelength. With appropriate optimization procedures, a high efficiency bandwidth product larger than 50 GHz and a large 3dB spectral full width around 30 nm can be obtained given realistic material parameters and fabrication constraints. Our device is fully compatible to the state-of-art CMOS process technology, and may serve as a high performance, low cost solution for the optical receiver in Silicon photonics based optical interconnects.

SU8 3D prisms with ultra small inclined angle for low-insertion-loss fiber/waveguide interconnection.

This paper presents a simple method for fabricating SU8 three dimensional (3D) prisms with very small inclined-angles for optical-fiber/planar-waveguide interconnection with low insertion-loss by combining self-filling, molding and nano-lithography processes on plane surface. The prisms possess ultra low 3D inclined angle of 0.6° and a small surface roughness of 3.5 nm. It is demonstrated that the transmission efficiency of SOI waveguides improved about 4.6 times at the presence of SU8 prisms with a coupling loss of 11 dB per taper and radiation loss of 2.4 dB per taper.