CO2-Driven N-Formylation/N-Methylation of Amines Using C-Scorpionate Metal Complexes.

C-scorpionate metal complexes, specifically, [NiCl2(tpm)]·3H2O, [CoCl2(tpm)]·3H2O and [PdCl2(tpm)] [tpm = hydrotris(1H-pyrazol-1-yl)methane], were effective in the N-formylation and N-methylation of amines using carbon dioxide, as carbon source, in the presence of sodium borohydride. Various parameters were studied, including reaction time, temperature, solvent volume, presence of additives, and catalyst amount. These parameters were found to have a significant impact on the selectivity of the product. [NiCl2(tpm)]·3H2O exhibited good conversion at 80 °C, but its selectivity towards formamide decreased with prolonged reaction time. Increasing the amount of [NiCl2(tpm)]·3H2O, the selectivity changed. [PdCl2(tpm)] showed different selectivity compared to [NiCl2(tpm)]·3H2O, while [CoCl2(tpm)]·3H2O presented poor results. Monitoring the reaction course by 1H NMR revealed the presence of an intermediate species that influenced product formation. These results highlight the versatility and catalytic potential of C-scorpionate metal complexes in the N-formylation/N-methylation of amines in the catalytic system (NaBH4/MeCN/CO2).

Correction: The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides.

Correction for 'The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides' by Girolamo Casella et al., Phys. Chem. Chem. Phys., 2023, https://doi.org/10.1039/d3cp02024j.

Exploring the Mechanisms behind the Anti-Tumoral Effects of Model C-Scorpionate Complexes.

The growing worldwide cancer incidence, coupled to the increasing occurrence of multidrug cancer resistance, requires a continuous effort towards the identification of new leads for cancer management. In this work, two C-scorpionate complexes, [FeCl2(κ3-Tpm)] (1) and [Co(κ3-TpmOH)2](NO3)2 (2), (Tpm = hydrotris(pyrazol-1-yl)methane and TpmOH = 2,2,2-tris(pyrazol-1-yl)ethanol), were studied as potential scaffolds for future anticancer drug development. Their cytotoxicity and cell migration inhibitory activity were analyzed, and an untargeted metabolomics approach was employed to elucidate the biological processes significantly affected by these two complexes, using two tumoral cell lines (B16 and HCT116) and a non-tumoral cell line (HaCaT). While [FeCl2(κ3-Tpm)] did not display a significant cytotoxicity, [Co(κ3-TpmOH)2](NO3)2 was particularly cytotoxic against the HCT116 cell line. While [Co(κ3-TpmOH)2](NO3)2 significantly inhibited cell migration in all tested cell lines, [FeCl2(κ3-Tpm)] displayed a mixed activity. From a metabolomics perspective, exposure to [FeCl2(κ3-Tpm)] was associated with changes in various metabolic pathways involving tyrosine, where iron-dependent enzymes are particularly relevant. On the other hand, [Co(κ3-TpmOH)2](NO3)2 was associated with dysregulation of cell adhesion and membrane structural pathways, suggesting that its antiproliferative and anti-migration properties could be due to changes in the overall cellular adhesion mechanisms.

The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides.

We have investigated using DFT methods the reaction mechanism of the Radzisewski reaction to obtain an amide via the reaction of ACN and H2O2 under alkaline conditions. The direct reaction between ACN and H2O2 showed a quite high activation energy (about 45 kcal mol-1) rendering this path unreliable. Instead, a fast reaction between ACN and HOO- forming the deprotonated species (PAIA-) of the peroxyacetimidic acid (PAIA) was observed. From this, PAIA- was guessed to form PAIA through a fast reaction of hydrolysis. Moreover, a second way of formation of PAIA, through an OH- catalyzed path, made the rate determining step (RDS) in very good agreement with experimental data, hence neglecting the contribution of the kinetically favored hydrolysis of PAIA-. This discrepancy was reconciled by considering that the final amide was obtained through a regioselective path forming the PAIA and the further reaction involving the decomposition of PAIA and PAIA-. Indeed, the PAIA obtained from the hydrolysis reaction showed a configuration which did not match the configurational behavior required. Conversely, the PAIA formed from the RDS path matched the required configuration needed to obtain the amide. Our findings also disentangled the experimenal debate on the assignment of the RDS.

p-Xylene Oxidation to Terephthalic Acid: New Trends.

Large-scale terephthalic acid production from the oxidation of p-xylene is an especially important process in the polyester industry, as it is mainly used in polyethylene terephthalate (PET) manufacturing, a polymer that is widely used in fibers, films, and plastic products. This review presents and discusses catalytic advances and new trends in terephthalic acid production (since 2014), innovations in terephthalic acid purification processes, and simulations of reactors and reaction mechanisms.

Glycerol Valorization-The Role of Biochar Catalysts.

The conversion of renewable feedstocks into new added-value products is a current hot topic that includes the biodiesel industry. When converting vegetable oils into biodiesel, approximately 10% of glycerol byproduct is produced. Glycerol can be envisaged as a chemical platform due to its chemical versatility, as a scaffold or building block, in producing a wide range of added-value chemicals. Thus, the development of sustainable routes to obtain glycerol-based products is crucial and urgent. This certainly encompasses the use of raw carbonaceous materials from biomass as heterogeneous acid catalysts. Moreover, the integration of surface functional groups, such as sulfonic acid, in carbon-based solid materials, makes them low cost, exhibiting high catalytic activity with concomitant stability. This review summarizes the work developed by the scientific community, during the last 10 years, on the use of biochar catalysts for glycerol transformation.

Diastereomeric dinickel(II) complexes with non-innocent bis(octaazamacrocyclic) ligands: isomerization, spectroelectrochemistry, DFT calculations and use in catalytic oxidation of cyclohexane.

Diastereomeric dinickel(II) complexes with bis-octaazamacrocyclic 15-membered ligands [Ni(L1-3-L1-3)Ni] (4-6) have been prepared by oxidative dehydrogenation of nickel(II) complexes NiL1-3 (1-3) derived from 1,2- and 1,3-diketones and S-methylisothiocarbohydrazide. The compounds were characterized by elemental analysis, ESI mass spectrometry, and IR, UV-vis, 1H NMR, and 13C NMR spectroscopy. Single crystal X-ray diffraction (SC-XRD) confirmed the isolation of the anti and syn isomers of bis-octaazamacrocyclic dinickel(II) complexes 4a and 4s, the syn-configuration of 5s and the anti-configuration of the dinickel(II) complex 6a. Dimerization of prochiral nickel(II) complexes 1-3 generates two chiral centers at the bridging carbon atoms. The anti-complexes were isolated as meso-isomers (4a and 6a) and the syn-compounds as racemic mixtures of R,R/S,S-enantiomers (4s and 5s). The syn-anti isomerization (epimerization) of the isolated complexes in chloroform was disclosed. The isomerization kinetics of 5a was monitored at five different temperatures ranging from 20 °C to 50 °C by 1H NMR spectroscopy indicating the clean conversion of 5a into 5s. The activation barrier determined from the temperature dependence of the rate constants via the Eyring equation was found to be ΔH‡ = 114 ± 1 kJ mol-1 with activation entropy ΔS‡ = 13 ± 3 J K-1 mol-1. The complexes contain two low-spin nickel(II) ions in a square-planar coordination environment. The electrochemical behavior of 4a, 4s, 5s and 6a and the electronic structure of the oxidized species were studied by UV-vis-NIR-spectroelectrochemistry (SEC) and DFT calculations indicating the redox non-innocent behavior of the complexes. The dinickel(II) complexes 4a, 4s, 5s and 6a/6s were investigated as catalysts for microwave-assisted solvent-free oxidation of cyclohexane by tert-butyl hydroperoxide to produce a mixture of cyclohexanone and cyclohexanol (KA oil). The best value for KA oil yield (16%) was obtained with a mixture of 6a/6s after 2 h of microwave irradiation at 100 °C.

Unprecedented Mechanochemical Synthesis and Heterogenization of a C-Scorpionate Au(III) Catalyst for Microwave-Assisted Biomass Valorization.

The transformation of biomass, a carbon resource presenting a huge potential to produce valuable chemicals, requires the search for sustainable catalytic routes. This work proposes the microwave-assisted oxidation of biomass -derived substrates, such as glycerol and the furfural derivatives 5-(hydroxymethyl)furfural (HMF) and 5-hydroxymethyl-2-furancarboxylic acid (HFCA), using the C-scorpionate dichloro-gold(III) complex [AuCl2(κ2-Tpm)]Cl (Tpm = HCpz3; pz = pyrazol-1-yl) as a catalyst, as prepared and supported on graphene, in solvent-free conditions. The unprecedented application of a mechanochemical procedure (in a planetary ball mill, in solid state) to synthesize a C-scorpionate complex, the [AuCl2(κ2-Tpm)]Cl, is disclosed. The immobilization of [AuCl2(κ2-Tpm)]Cl on graphene was performed using different methods, including some (e.g., microwave irradiation and liquid assisted grinding) for the first time. The structural properties and the performance of the prepared catalytic materials are presented and discussed.

Unprecedented Use of NHC Gold (I) Complexes as Catalysts for the Selective Oxidation of Ethane to Acetic Acid.

The highly efficient eco-friendly synthesis of acetic acid (40% yield) directly from ethane is achieved by the unprecedented use of N-heterocyclic carbene (NHC) and N-heterocyclic oxo-carbene (NHOC) gold(I) catalysts in mild conditions. This is a selective and promising protocol to generate directly acetic acid from ethane, in comparison with the two most used methods: (i) the three-step, capital- and energy-intensive process based on the high-temperature conversion of methane to acetic acid; (ii) the current industrial methanol carbonylation processes, based in iridium and expensive rhodium catalysts. Green metrics determinations highlight the environmental advantages of the new ethane oxidation procedure. Comparison with previous reported published catalysts is performed to highlight the features of this remarkable protocol.

Oxido- and Dioxido-Vanadium(V) Complexes Supported on Carbon Materials: Reusable Catalysts for the Oxidation of Cyclohexane.

Oxidovanadium(V) and dioxidovanadium(V) compounds, [VO(OEt)L] (1) and [Et3NH][VO2L] (2), were synthesized using an aroylhydrazone Schiff base (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L). They were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), (1H and 51V) nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS) and single crystal X-ray diffraction analyses. Both complexes were immobilized on functionalized carbon nanotubes and activated carbon. The catalytic performances of 1 and 2, homogenous and anchored on the supports, were evaluated for the first time towards the MW-assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of cyclohexane under heterogeneous conditions. The immobilization of 1 and 2 on functionalized carbon materials improved the efficiency of catalytic oxidation and allowed the catalyst recyclability with a well-preserved catalytic activity.

Selective Styrene Oxidation to Benzaldehyde over Recently Developed Heterogeneous Catalysts.

The selective oxidation of styrene under heterogeneous catalyzed conditions delivers environmentally friendly paths for the production of benzaldehyde, an important intermediate for the synthesis of several products. The present review explores heterogeneous catalysts for styrene oxidation using a variety of metal catalysts over the last decade. The use of several classes of supports is discussed, including metal-organic frameworks, zeolites, carbon materials and silicas, among others. The studied catalytic systems propose as most used oxidants tert-butyl hydroperoxide, and hydrogen peroxide and mild reaction conditions. The reaction mechanism proceeds through the generation of an intermediate reactive metal-oxygen species by catalyst-oxidant interactions. Overall, most of the studies highlight the synergetic effects among the metal and support for the activity and selectivity enhancement.

Efficient and Reusable Iron Catalyst to Convert CO2 into Valuable Cyclic Carbonates.

The production of cyclic carbonates from CO2 cycloaddition to epoxides, using the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz = 1H-pyrazol-1-yl) as a catalyst, is achieved in excellent yields (up to 98%) in a tailor-made ionic liquid (IL) medium under mild conditions (80 °C; 1-8 bar). A favorable synergistic catalytic effect was found in the [FeCl2{κ3-HC(pz)3}]/IL system. Notably, in addition to exhibiting remarkable activity, the catalyst is stable during ten consecutive cycles, the first decrease (11%) on the cyclic carbonate yield being observed during the 11th cycle. The use of C-scorpionate complexes in ionic liquids to afford cyclic carbonates is presented herein for the first time.

Spectroelectrochemical Properties and Catalytic Activity in Cyclohexane Oxidation of the Hybrid Zr/Hf-Phthalocyaninate-Capped Nickel(II) and Iron(II) tris-Pyridineoximates and Their Precursors.

The in situ spectroelectrochemical cyclic voltammetric studies of the antimony-monocapped nickel(II) and iron(II) tris-pyridineoximates with a labile triethylantimony cross-linking group and Zr(IV)/Hf(IV) phthalocyaninate complexes were performed in order to understand the nature of the redox events in the molecules of heterodinuclear zirconium(IV) and hafnium(IV) phthalocyaninate-capped derivatives. Electronic structures of their 1e-oxidized and 1e-electron-reduced forms were experimentally studied by electron paramagnetic resonance (EPR) spectroscopy and UV-vis-near-IR spectroelectrochemical experiments and supported by density functional theory (DFT) calculations. The investigated hybrid molecular systems that combine a transition metal (pseudo)clathrochelate and a Zr/Hf-phthalocyaninate moiety exhibit quite rich redox activity both in the cathodic and in the anodic region. These binuclear compounds and their precursors were tested as potential catalysts in oxidation reactions of cyclohexane and the results are discussed.

An investigation of two copper(ii) complexes with a triazole derivative as a ligand: magnetic and catalytic properties.

Two new copper(ii) complexes [Cu2(L)2(OAc)2(H2O)2] (1) (L = 3-methyl-5-pyridin-2-yl-1,2,4-triazole) and [CuL2] (2) were prerared and thoroughly studied. The complexes are able to selectively catalyze the oxidation of styrene towards benzaldehyde and of cyclohexane to KA oil. The 2D coordination polymer 1 showed an antiferromagnetic behaviour attributed to the intrachain magnetic coupling.

Application of Ionic Liquids in Electrochemistry-Recent Advances.

In this review, the roles of room temperature ionic liquids (RTILs) and RTIL based solvent systems as proposed alternatives for conventional organic electrolyte solutions are described. Ionic liquids are introduced as well as the relevant properties for their use in electrochemistry (reduction of ohmic losses), such as diffusive molecular motion and ionic conductivity. We have restricted ourselves to provide a survey on the latest, most representative developments and progress made in the use of ionic liquids as electrolytes, in particular achieved by the cyclic voltammetry technique. Thus, the present review comprises literature from 2015 onward covering the different aspects of RTILs, from the knowledge of these media to the use of their properties for electrochemical processes. Out of the scope of this review are heat transfer applications, medical or biological applications, and multiphasic reactions.

Selective Oxidation of Ethane to Acetic Acid Catalyzed by a C-Scorpionate Iron(II) Complex: A Homogeneous vs. Heterogeneous Comparison.

The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe3O4/TiO2/[FeCl2{κ3-HC(pz)3}] composite. This catalytic system, where the magnetic catalyst is easily recovered and reused, is highly selective to the acetic acid synthesis. The performed green metrics calculations highlight the "greeness" of the new ethane oxidation procedure.

New Trends in C-C Cross-Coupling Reactions: The Use of Unconventional Conditions.

The ever-growing interest in the cross-coupling reaction and its applications has increased exponentially in the last decade, owing to its efficiency and effectiveness. Transition metal-mediated cross-couplings reactions, such as Suzuki-Miyaura, Sonogashira, Heck, and others, are powerful tools for carbon-carbon bond formations and have become truly fundamental routes in catalysis, among other fields. Various greener strategies have emerged in recent years, given the widespread popularity of these important reactions. The present review comprises literature from 2015 onward covering the implementation of unconventional methodologies in carbon-carbon (C-C) cross-coupling reactions that embodies a variety of strategies, from the use of alternative energy sources to solvent- free and green media protocols.

Catalytic Performance of a Magnetic Core-Shell Iron(II) C-Scorpionate under Unconventional Oxidation Conditions.

For the first time, herein is reported the use of a magnetic core-shell support for a C-scorpionate metallic complex. The prepared hybrid material, that consists on the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz, pyrazolyl) immobilized at magnetic core-shell particles (Fe3O4/TiO2), was tested as catalyst for the oxidation of secondary alcohols using the model substrate 1-phenylethanol. Moreover, the application of alternative energy sources (e.g., ultrasounds, microwaves, mechanical or thermal) for the peroxidative alcohol oxidation using the magnetic heterogenized iron(II) scorpionate led to different/unusual outcomes that are presented and discussed.

Nickel(II), Copper(II) and Palladium(II) Complexes with Bis-Semicarbazide Hexaazamacrocycles: Redox-Noninnocent Behavior and Catalytic Activity in Oxidation and C-C Coupling Reactions.

Nickel(II), copper(II), and palladium(II) complexes MLH, where M = Ni (1), Cu (2), Pd (3), and MLOMe, where M = Ni (4), Cu (5), Pd (6), have been prepared by reactions of NiCl2·6H2O, Cu(OAc)2·H2O, and PdCl2(MeCN)2 with 14-membered bis-semicarbazide hexaazamacrocycles H2LH and H2LOMe in dimethylformamide (DMF). The compounds were characterized by elemental analysis, ESI mass spectrometry, IR, UV-vis, and 1D (1H, 13C) and 2D (1H-1H COSY, 1H-1H TOCSY, 1H-1H NOESY, 1H-13C HSQC, 1H-13C HMBC) NMR spectra (1, 3, 4, and 6), and X-ray diffraction (2, 4-6). The complexes with MIIN4 coordination environment have S = 0, 1/2, 0 ground states for Ni, Cu, and Pd, respectively. The electrochemical behavior of 1-6 was investigated in detail. The electronic structures of 1e-oxidized species were studied by EPR, UV-vis-NIR spectroelectrochemistry, and DFT calculations, indicating the redox-noninnocent behavior of the ligands. Compounds 1-6 were tested in the oxidation of styrene and C-C coupling (Henry and Knoevenagel condensations). Compounds 2 and 5 selectively catalyze the microwave-assisted oxidation of neat styrene to benzaldehyde (up to 88% yield), whereas the 1 and 4 catalytic systems afforded up to 99% ß-nitroethanol yield with an appreciable diastereoselectivity toward the formation of the anti isomer.