True uterus didelphys in she-camel: a case report and review of literature.

Background: Uterus didelphys is a rare congenital anomaly of the female reproductive tract characterized by a divided uterine cervix and body. It occurs due to abnormal development of the paramesonephric (Müllerian) duct. Different forms of uterus didelphys have been reported in several animal species, including bovine, equine, ewe, goat, swine, and bitch. However, there is no previous report that has documented a completely divided female genital tract in she-camel. Moreover, there is a lack of literature regarding this anomaly in animals. Therefore, the present study reports, for the first time, a rare case of a completely divided female genital tract in a she-camel. In addition, the existing relevant literature on uterus didelphys in different animal species is reviewed. Case presentation: A female reproductive tract of she-camel, approximately 10 years old, with a history of previous successful pregnancy, was brought to the anatomy department following the slaughtering of the animal. Initial examination revealed a normal reproductive tract consisting of two ovaries, two fallopian tubes, a uterus, and a vagina. A closer examination revealed a completely divided vagina, with an external os opened into each part of the vagina, as well as a divided uterine body and cervix. Intrauterine infusion of saline through one external os confirmed complete separation of uterine body and cervix. Conclusion: To the authors' knowledge, this is the first reported case of a completely divided female genital tract in a she-camel. This review summarizes the previous reports about uterus didelphys in farm animals.

Recapitulating COVID-19 detection methods: RT-PCR, sniffer dogs and electronic nose.

In December 2019, a number of subjects presenting with an unexplained pneumonia-like illness were suspected to have a link to a seafood market in Wuhan, China. Subsequently, this illness was identified as the 2019-novel coronavirus (2019-nCoV) or severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by the World Committee on Virus Classification. Since its initial identification, the virus has rapidly sperad across the globe, posing an extraordinary challenge for the medical community. Currently, the Reverse Transcriptase Polymerase Chain Reaction (RT-PCR) is considered the most reliable method for diagnosing SARS-CoV-2. This procedure involves collecting oro-pharyngeal or nasopharyngeal swabs from individuals. Nevertheless, for the early detection of low viral loads, a more sensitive technique, such as droplet digital PCR (ddPCR), has been suggested. Despite the high effectiveness of RT-PCR, there is increasing interest in utilizing highly trained dogs and electronic noses (eNoses) as alternative methods for screening asymptomatic individuals for SARS-CoV-2. These dogs and eNoses have demonstrated high sensitivity and can detect volatile organic compounds (VOCs), enabling them to distinguish between COVID-19 positive and negative individuals. This manuscript recapitulates the potential, advantages, and limitations of employing trained dogs and eNoses for the screening and control of SARS-CoV-2.

Radiographic and functional results of Ilizarov fixation in the management of nonunion of tibia and femur fractures: a retrospective case series.

BACKGROUND: Femoral and tibial fractures may result in delayed union and nonunion, posing significant challenges in orthopedic practice. The Ilizarov technique has emerged as a promising solution for managing these complex cases. OBJECTIVES: Evaluate the radiographic and functional results of Ilizarov fixation in the treatment of nonunion of tibia and femur fractures. DESIGN: Retrospective. SETTINGS: Hospitals affiliated with a university hospital. PATIENTS AND METHODS: Patient demographics, fracture characteristics, and treatment details were analyzed for the period from October 2015 to September 2022 in patients who were treated for nonunion of the tibia and femur using the Ilizarov fixator. Clinical and radiological assessments were performed using the Association for the Study and Application of Methods of Ilizarov (ASAMI) criteria. The study focused on assessing the average duration for union and frame removal, bone results, successful union rates, and functional results using the ASAMI criteria, obtaining data from the existing medical records, spanning various medical facilities treating nonunion fractures. SAMPLE SIZE: 126 patients. RESULTS: The average duration for union and frame removal was 8 months, with excellent bone results observed in 60.32% of cases. Out of 126 patients, 118 achieved successful union, while there were 2 failure cases necessitating amputation (1.52%). Functional results revealed excellent outcomes in 39.68% of cases. Complications included pin tract infections, ankle and knee stiffness, and limb shortening. External fixation duration and infection eradication were consistent with previous research, emphasizing the technique's effectiveness. CONCLUSIONS: The Ilizarov technique proved highly effective in managing nonunion tibia and femur fractures, offering favorable outcomes in terms of union, infection control, pain relief, and functional recovery. While excellent bone outcomes do not guarantee optimal function, this method remains a reliable approach for complex cases. LIMITATIONS: Potential biases inherent in retrospective analyses and the need for further randomized controlled trials to comprehensively compare treatment modalities.

The "foothill" entry for cephalomedullary nailing in unstable proximal femoral fractures: a technical note with a review of the literature.

Cephalomedullary nailing for unstable proximal femoral fractures is widely utilized, especially for geriatric osteoporotic fractures. There are two starting points for entry, namely trochanteric tip entry and pyriformis fossa entry, both have advantages and disadvantages, the tip of the greater trochanter seems that it is not the ideal starting point for trochanteric entry nails, the study presents the foothill entry point as a reproducible, technically feasible entry point to overcome the shortcoming of both standard starting points, and it could be easy executed with clear intraoperative fluoroscopic landmarks and lead to appropriate nail position without intraoperative complications.

Nanoengineered Silica-Based Biomaterials for Regenerative Medicine.

The paradigm of regenerative medicine is undergoing a transformative shift with the emergence of nanoengineered silica-based biomaterials. Their unique confluence of biocompatibility, precisely tunable porosity, and the ability to modulate cellular behavior at the molecular level makes them highly desirable for diverse tissue repair and regeneration applications. Advancements in nanoengineered silica synthesis and functionalization techniques have yielded a new generation of versatile biomaterials with tailored functionalities for targeted drug delivery, biomimetic scaffolds, and integration with stem cell therapy. These functionalities hold the potential to optimize therapeutic efficacy, promote enhanced regeneration, and modulate stem cell behavior for improved regenerative outcomes. Furthermore, the unique properties of silica facilitate non-invasive diagnostics and treatment monitoring through advanced biomedical imaging techniques, enabling a more holistic approach to regenerative medicine. This review comprehensively examines the utilization of nanoengineered silica biomaterials for diverse applications in regenerative medicine. By critically appraising the fabrication and design strategies that govern engineered silica biomaterials, this review underscores their groundbreaking potential to bridge the gap between the vision of regenerative medicine and clinical reality.

Modified one third tubular plate (spring plate) augmented with reconstruction plates for treatment of comminuted posterior wall acetabular fractures, Short to midterm outcomes of 24 patients.

The most common form of acetabular fracture is believed to be the posterior wall; its incidence ranges from 25% to 47%. Managing such fractures has been difficult in the past and until recently. To obtain a favorable functional outcome, an accurate diagnosis and a well-executed treatment strategy are essential. Objective: To evaluate the clinical and functional outcomes of employing a spring plate augmented by a traditional 3.5 mm reconstruction plate for the treatment of comminuted posterior wall acetabular fractures. Patients and Methods: A prospective case series was performed on 24 patients with comminuted fractures of the posterior wall. After an average of 6 days, the patients underwent surgery. Eighteen patients were fixed with one spring plate, six patients were fixed with two spring plates, and all were reinforced with a 3.5-mm reconstruction plate. Each case was followed once every three months until the fracture healed and then regularly every six months thereafter. Results: There were 21 men and 3 women. The average follow-up period was 14 months, and the median age was 34.5 years. The main reason for injuries was motor vehicle collisions. The mean operation time was 107.5 min. The clinical results were evaluated by the MAP and m HHS, and the means were 10.2 (5-12) and 86 (64-96), respectively. Only two patients developed avascular necrosis and were treated by total hip replacement, another three (12.5%) had mild arthritis. Conclusion: Comminuted acetabulum posterior wall fractures can be stabilized with spring plates. It could be used in conjunction with the primary reconstruction plate as a viable alternative for stable and anatomical reduction. High patient satisfaction and good functional results make this approach effective.

Biominerals and Bioinspired Materials in Biosensing: Recent Advancements and Applications.

Inspired by nature's remarkable ability to form intricate minerals, researchers have unlocked transformative strategies for creating next-generation biosensors with exceptional sensitivity, selectivity, and biocompatibility. By mimicking how organisms orchestrate mineral growth, biomimetic and bioinspired materials are significantly impacting biosensor design. Engineered bioinspired materials offer distinct advantages over their natural counterparts, boasting superior tunability, precise controllability, and the ability to integrate specific functionalities for enhanced sensing capabilities. This remarkable versatility enables the construction of various biosensing platforms, including optical sensors, electrochemical sensors, magnetic biosensors, and nucleic acid detection platforms, for diverse applications. Additionally, bioinspired materials facilitate the development of smartphone-assisted biosensing platforms, offering user-friendly and portable diagnostic tools for point-of-care applications. This review comprehensively explores the utilization of naturally occurring and engineered biominerals and materials for diverse biosensing applications. We highlight the fabrication and design strategies that tailor their functionalities to address specific biosensing needs. This in-depth exploration underscores the transformative potential of biominerals and materials in revolutionizing biosensing, paving the way for advancements in healthcare, environmental monitoring, and other critical fields.

Biomimetic Materials for Skin Tissue Regeneration and Electronic Skin.

Biomimetic materials have become a promising alternative in the field of tissue engineering and regenerative medicine to address critical challenges in wound healing and skin regeneration. Skin-mimetic materials have enormous potential to improve wound healing outcomes and enable innovative diagnostic and sensor applications. Human skin, with its complex structure and diverse functions, serves as an excellent model for designing biomaterials. Creating effective wound coverings requires mimicking the unique extracellular matrix composition, mechanical properties, and biochemical cues. Additionally, integrating electronic functionality into these materials presents exciting possibilities for real-time monitoring, diagnostics, and personalized healthcare. This review examines biomimetic skin materials and their role in regenerative wound healing, as well as their integration with electronic skin technologies. It discusses recent advances, challenges, and future directions in this rapidly evolving field.

Impact of pH modification of the empirically used tobramycin ophthalmic solution on MIC90 concentration in tears and aqueous humor of donkeys (Equus asinus).

BACKGROUND: Commercial tobramycin ophthalmic solution is frequently used empirically to treat ocular disorders in equines, despite being primarily formulated for use in humans. It has been noted that tobramycin MIC90 concentration (minimal inhibitory concentration to 90% of microbial growth) rapidly declined following topical administration. It is hypothesized that adjustment of the pH of the empirically used tobramycin ophthalmic solution -prepared for human use- with the pH of the tears of donkeys, could increase the bioavailability of the drug and subsequently improve its penetration to the aqueous humor. Therefore, this study aimed to evaluate the impact of pH adjustment of the empirically used tobramycin ophthalmic solution on MIC90 concentration in tears and aqueous humor of donkeys (Equus asinus). The study was conducted on six (n = 6) clinically healthy donkeys. In each donkey, one eye was randomly selected to receive 210 µg tobramycin of the commercial tobramycin (CT) and used as a positive control (C group, n = 6). The other eye (treated eye) received 210 µg of the modified tobramycin ophthalmic solution (MT) (T group, n = 6). Tears and aqueous humor samples were collected 5-, 10-, 15-, 30- min, and 1-, 2-, 4-, and 6 h post-instillation. RESULTS: Modifying the pH of the empirically used commercial tobramycin ophthalmic solution in donkeys at a pH of 8.26 enhanced the drug's bioavailability. The MIC90 of the most hazardous bacteria isolated from equines' eyes such as Pseudomonas aeruginosa (MIC90 = 128 µg/ml) and Staphylococcus aureus (MIC90 = 256 µg/ml) was covered early (5 min post-instillation) and over a longer period in donkey tears (239-342 min) and aqueous humor (238-330 min) with the modified tobramycin solution. CONCLUSIONS: Adjustment of the pH of the commercial tobramycin ophthalmic solution, empirically used by veterinarians to treat donkeys' ophthalmic infections at a pH of 8.26, isotonic with the donkeys' tears pH, resulting in higher concentrations of tobramycin in tears and aqueous humor for a longer time.

Finite element analysis of the effect of framework material and thickness on the biomechanical performance of 'All­on­Four' full-arch prosthesis.

The aim of this research was to evaluate the stress distribution in the 'All-on-Four' prosthesis and the surrounding bone, with different framework materials and thicknesses. Five frameworks (alumina, zirconia, titanium, fiberglass reinforced resin (FRR), and polyether ether ketone (PEEK)) with two thicknesses (3.5 &5.5 mm) were stimulated in this research. A vertical force of 200 N was applied on a 1 mm circular area, at the cantilever, and at the region of the incisors, simulating different mastication mechanisms. The results illustrated that the 5.5 mm framework reduced the stresses on most parts, mucosa, and bone tissues, compared to 3.5 mm.

Enhancing Odor Analysis with Gas Chromatography-Olfactometry (GC-O): Recent Breakthroughs and Challenges.

Gas chromatography-olfactometry (GC-O) has made significant advancements in recent years, with breakthroughs in its applications and the identification of its limitations. This technology is widely used for analyzing complex odor patterns. The review begins by explaining the principles of GC-O, including sample preparation, separation methods, and olfactory evaluation techniques. It then explores the diverse range of applications where GC-O has found success, such as food and beverage industries, environmental monitoring, perfume and aroma development, and forensic analysis. One of the major breakthroughs in GC-O analysis is the improvement in separation power and resolution of odorants. Techniques like rapid GC, comprehensive two-dimensional GC, and multidimensional GC have enhanced the identification and quantification of odor-active chemicals. However, GC-O also has limitations. These include the challenges in detecting and quantifying trace odorants, dealing with matrix effects, and ensuring the repeatability and consistency of results across laboratories. The review examines these limitations closely and discusses potential solutions and future directions for improvement in GC-O analysis. Overall, this review presents a comprehensive overview of the recent advances in GC-O, covering breakthroughs, applications, and limitations. It aims to promote the wider usage of GC-O analysis in odor analysis and related industries. Researchers, practitioners, and anyone interested in leveraging the capabilities of GC-O in analyzing complex odor patterns will find this review a valuable resource. The article highlights the potential of GC-O and encourages further research and development in the field.

Ilizarov-Assisted Healing for a Neglected Non-united Fracture Calcaneus: A Case Report and Literature Review.

Although calcaneal fracture is not a rare injury and nonunion is rare, proper management of a calcaneal fracture is mandatory because it can be a prerequisite for long-term functional disabilities of the foot, including posttraumatic osteoarthritis of the hindfoot joint, chronic pain, and persistent swelling syndromes. Restoration of axial alignment and joint congruence with careful caution toward soft tissues is the basic principle of treatment; however, few literature reviews to date have addressed the characteristics of a calcaneal nonunion fracture. We discuss a case of a 30-year-old male, manual worker, and diabetic type 1 with a calcaneal fracture reaching the articular surface of the subtalar joint who underwent a simple fracture to a painful nonunion fracture after conservative treatment for seven months before presenting to our hospital being unable to walk with heel deformity. The Ilizarov frame was used to correct deformities in the hindfoot, enhance healing by compressing the fracture site, and allow early weight bearing with the maintenance of subtalar joint function. Our result demonstrates increased calcaneal healing when the Ilizarov foot frame is used, and when the calcaneal fracture site is compressed, this is a good option for maintaining foot and ankle function, even in diabetic patients.

Comparative studies of four cumin landraces grown in Egypt.

One of the significant aromatic plants applied in food and pharma is cumin. Despite its massive trading in Egypt, there are no comprehensive reports on cumin landraces profile screening. This study aimed to investigate the variation in seeds' physical and biochemical profiles and genetic diversity as well as assess the efficiency of seeds' germination under salinity stress. Consequently, during the 2020/2021 growing season, four common cumin seed landraces were gathered from various agro-climatic regions: El Gharbia, El Menia, Assiut, and Qena. Results showed a significant variation in physical profile among the four seeds of landraces. In addition, Assiut had the highest percentage of essential oil at 8.04%, whilst Qena had the largest amount of cumin aldehyde, the primary essential oil component, at 25.19%. Lauric acid was found to be the predominant fatty acid (54.78 to 62.73%). According to ISSR amplification, El Menia presented a negative unique band, whereas other landraces offered a positive band. Additionally, the cumin genotypes were separated into two clusters by the dendrogram, with El Gharbia being located in an entirely separate cluster. There were two sub-clusters within the other cluster: El Menia in one and Assiut and Qena in the other. Moreover, the germination sensitivity to the diverse salinity concentrations (control, 4, 8, 12, and 16 dS/m) findings showed that landraces exhibited varying responses to increased salinity when El Gharbia and El Menia showed a moderate response at four dS/m. Whilst, Qena landraces showed supreme values among other landraces under 12 and 16 dS/m. The majority of the examined features had strong positive associations over a range of salinity levels, according to phenotypic correlation coefficient analysis. To accomplish the aims of sustainable agriculture in Egypt, it would be imperative that the potential breeding program for cumin landraces consider this screening study.

Green ecofriendly enhancement of cellulase productivity using agricultural wastes by Aspergillus terreus MN901491: statistical designs and detergent ability on cotton fabrics.

BACKGROUND: Cellulase is considered a group member of the hydrolytic enzymes, responsible for catalyzing the hydrolysis of cellulose and has various industrial applications. Agricultural wastes are used as an inexpensive source for several utilizable products throughout the world. So, searching for cellulase enzymes from fungal strains capable of utilizing agricultural wastes to increase productivity, reduce costs and overcome waste accumulation in the environment is very important to evaluate its potency as a bio-additive to detergent agents. RESULTS: In the current study, the previously identified fungal strain Aspergillus terreus MN901491 was screened and selected for cellulase production. Medium parameters were optimized using one-factor-at-a-time (OFAT) and multi-factorial (Plackett-Burman and Box-Behnken) design methods. OFAT showed the ability of the fungal strain to utilize agricultural wastes (corn cob and rice straw) as a substrate. Also, yeast extract was the best nitrogen source for enhancing cellulase productivity. The most significant variables were determined by Plackett-Burman Design (PBD) and their concentrations were optimized by Response Surface Methodology (RSM) using Box-Behnken Design (BBD). Among eleven independent variables screened by PBD, malt extract, (NH4)2SO4, and KCl were the most significant ones followed by rice straw which affected cellulase production positively. The ANOVA results particularly the R2-value of PBD (0.9879) and BBD (0.9883) confirmed the model efficiency and provided a good interpretation of the experiments. PBD and BBD improved cellulase productivity by 6.1-fold greater than that obtained from OFAT. Medium optimization using OFAT and statistical models increased cellulase production from A. terreus MN901491 by 9.3-fold compared to the non-optimized medium. Moreover, the efficiency of cellulase activity on cotton fabrics as a bio-additive detergent was evaluated and estimated using whiteness and scanning electron microscope (SEM) that affirmed its potential effect and remarkable detergent ability to improve whiteness by 200% in comparison with non-washed fabric and by 190% in comparison with fabric washed by water. CONCLUSION: The presented work was stabilized as a multi-efficiency in which wastes were used to produce cellulase enzyme from the fungal strain, Aspergillus terreus MN901491 as a bio-additive to detergent applications that involved ecofriendly and green processes.

A new green fluorimetric micelle complexation approach for reduction of the consumed solvent and quantification of avapritinib in biological fluids.

Avapritinib (AVA) is the first medication authorized by the US-FDA in 2020 for the management of gastrointestinal stromal tumours (GISTs) that can't be treated by surgery. Cancer is among the most common causes of death worldwide and is the second most common cause of death after cardiovascular disease. Therefore, a quick, easy, sensitive, and straightforward fluorimetric approach was used to analyse AVA in pharmaceutical materials and blood plasma (pharmacokinetic). The suggested technique relies on 2% sodium dodecyl sulphate (SDS, pH 4) micellar system augmentation of the fluorescence of the tested drug. The technique demonstrated high relative fluorescence intensity (RFI) at 430 nm after excitation at 340 nm. Concentrations ranging from 20.0-400.0 ng mL-1 with a limit of quantitation of 9.47 ng mL-1 were used to obtain luminescence data for the studied medicine. In addition, the quantum yield of the AVA fluorescence was increased with the gradual addition of a surfactant at a concentration above its critical micellar level. This knowledge has been exploited to enhance the effectiveness of a spectrofluorometric technique for the estimation of AVA in human plasma (98.95 ± 1.22%) and uniformity tests with greenness assessments. The conditions for enhanced fluorescence were optimized and fully validated using US-FDA and International Conference on Harmonization (ICH) rules. This innovative strategy was expanded for AVA stability research in human plasma across various circumstances. This approach is an eco-friendly solution compared to traditional testing methods that use hazardous chemicals.

3D Digital Modeling of Dental Casts from Their 3D CT Images with Scatter and Beam-Hardening Correction.

Dental 3D modeling plays a pivotal role in digital dentistry, offering precise tools for treatment planning, implant placement, and prosthesis customization. Traditional methods rely on physical plaster casts, which pose challenges in storage, accessibility, and accuracy, fueling interest in digitization using 3D computed tomography (CT) imaging. We introduce a method that can reduce both artifacts simultaneously. To validate the proposed method, we carried out CT scan experiments using plaster dental casts created from dental impressions. After the artifact correction, the CT image quality was greatly improved in terms of image uniformity, contrast-to-noise ratio (CNR), and edge sharpness. We examined the correction effects on the accuracy of the 3D models generated from the CT images. As referenced to the 3D models derived from the optical scan data, the root mean square (RMS) errors were reduced by 8.8~71.7% for three dental casts of different sizes and shapes. Our method offers a solution to challenges posed by artifacts in CT scanning of plaster dental casts, leading to enhanced 3D model accuracy. This advancement holds promise for dental professionals seeking precise digital modeling for diverse applications in dentistry.

Investigating the Spatial Distribution of Proliferating Cells in Primary Ovarian Cancers.

BACKGROUND: Ovarian cancer (OC) accounts for about 4% of female cancers globally. While Ki67-immunopositive (Ki67+) cell density is commonly used to assess proliferation in OC, the two-dimensional (2D) distribution pattern of these cells is poorly understood. This study explores the 2D distribution pattern of Ki67+ cells in primary OC tissues and models the proliferation process to improve our understanding of this hallmark of cancer. METHODS: A total of 100 tissue cores, included in a tissue microarray (TMA) representing 5 clear cell carcinomas, 62 serous carcinomas, 10 mucinous adenocarcinomas, 3 endometrioid adenocarcinomas, 10 lymph node metastases from OC, and 10 samples of adjacent normal ovary tissue, were stained using a standardized immunohistochemical protocol. The computer-aided image analysis system assessed the 2D distribution pattern of Ki67+ proliferating cells, providing the cell number and density, patterns of randomness, and cell-to-cell closeness. Three computer models were created to simulate behavior and responses, aiming to gain insights into the variations in the proliferation process. RESULTS: Significant differences in Ki67+ cell density were found between low- and high-grade serous carcinoma/mucinous adenocarcinomas (p = 0.003 and p = 0.01, respectively). The Nearest Neighbor Index of Ki67+ cells differed significantly between high-grade serous carcinomas and endometrioid adenocarcinomas (p = 0.01), indicating distinct 2D Ki67+ distribution patterns. Proxemics analysis revealed significant differences in Ki67+ cell-to-cell closeness between low- and high-grade serous carcinomas (p = 0.002). Computer models showed varied effects on the overall organization of Ki67+ cells and the ability to preserve the original 2D distribution pattern when altering the location and/or density of Ki67+ cells. CONCLUSIONS: Cell proliferation is a hallmark of OCs. This study provides new evidence that investigating the Ki67+ cell density and 2D distribution pattern can assist in understanding the proliferation status of OCs. Moreover, our computer models suggest that changes in Ki67+ cell density and their location are critical for maintaining the 2D distribution pattern.

The developmental architecture of the crop of quail embryos (Coturnix coturnix): Morphometric, light and scanning electron microscopy.

The present study focused on the histogenesis of the crop in quail embryos. The developmental sequence was recorded from day 10 of incubation to the hatching day (17th day) by gross anatomy, morphometric analysis and by using light and scanning electron microscope (SEM). Grossly, the crop was distinguished as an enlarged pouch of the cervical oesophagus on the 12th day of incubation. Histologically, the development of the crop began on the 10th day of incubation. The muscularis mucosae was observed as a small, thin layer of myoblast cells on the 10th day, then it appeared as longitudinally arranged smooth muscle fibres with progression of the developmental age till hatching day. The submucosal layer was also observed on the 10th day, while the lamina propria, muscular layer (inner circular and outer longitudinal layers of smooth muscle fibre) and glandular primordia were detected on the 12th day. The epithelial cells of crop revealed affinity for PAS stain and AB-PAS on the 10th day of incubation till the 17th day, while the affinity for AB stain appeared on the 14th day of incubation. Additionally, the glandular cells showed the positive for AB, PAS and AB-PAS on the 12th day of incubation. SEM sections showed variable sizes of the openings of the oesophageal glands. In conclusion, the present study provided a detailed overview of the histogenesis of the crop in quail embryos.

Modified gastro-soleus turn-down flap for chronic or neglected achilles tendon ruptures.

BACKGROUND: Achilles' tendon chronic rupture is a common entity that is usually misdiagnosed or mistreated. Hence, she was presented to us later or with complications affecting her gait. Surgical resection is needed to either bridge the gap or reinforce the strength of the tendon repair. OBJECTIVES: Our study's goal was to assess the clinical results of repairing chronic Achilles' tendon lesions employing the middle segment of the proximal portion of the tendon (gastro-soleus), as a turn-down flap. METHODS: Our prospective interventional single arm study included 18 patients with chronic Achilles' tendon rupture attending at Al-Azhar university hospitals in Cairo, Egypt from May 2020 to April 2023. Diagnosis of the patients was confirmed by radiographic and clinical investigations. They were all treated with the same open reconstruction procedure using a modified GSF. The average follow-up was 12 months. The results of this study were assessed by the Achilles tendon rupture score (ATRS), American Orthopedic Foot and Ankle Society (AOFAS) score, and capacity to perform repeated heel raises on the affected side. RESULTS: The mean operative time was 72.77 min. The median (IQR) time of reconstruction was 10 (8-12) after the injury. The median (IQR) length of flab was 4.5 (4.3-5) 9 (Table 2). No intraoperative complications occurred. The typical follow-up period was 12 months (6-18 months). In terms of the ATRS, we found a significant reduction from 82.8 ± 3 preoperatively to 20.8 ± 6.7 at 12 months postoperatively (P value = 0.001). As regards the AOFAS score, it was increased from 49.5 ± 10 preoperatively to 83.8 ± 8.5 12 months postoperatively (P = 0.001). In terms of the post operative complications, there was no re-rupture. Two patients experienced superficial wound infection which improved with daily dressing and antibiotics. Additionally, two patients had slight ankle stiffness four months after the operation, which improved after programmed rehabilitation at the sixth month. CONCLUSION: The modified GSTF is a simple, safe, well-tolerated and effective method of treatment with excellent functional results and greater patient content.