RESUMO
The complementary field-effect transistor (CFET) with N-type FET (NFET) stacked on P-type FET (PFET) is a promising device structure based on gate-all-around FET (GAAFET). Because of the high-density stacked structure, the self-heating effect (SHE) becomes more and more severe. Buried thermal rail (BTR) technology on top of the buried power rail (BPR) process is proposed to improve heat dissipation. Through a systematical 3D Technology Computer Aided Design (TCAD) simulation, compared to traditional CFET and CFET with BPR only, the thermal resistance (Rth) of CFET can be significantly reduced with BTR technology, while the drive capability is also improved. Furthermore, based on the proposed BTR technology, different power delivery structures of top-VDD-top-VSS (TDTS), bottom-VDD-bottom-VSS (BDBS), and bottom-VDD-top-VSS (BDTS) were investigated in terms of electrothermal and parasitic characteristics. The Rth of the BTR-BDTS structure is decreased by 5% for NFET and 9% for PFET, and the Ion is increased by 2% for NFET and 7% for PFET.
RESUMO
In this paper, a novel scheme for source/drain-first (S/D-first) full bottom dielectric isolation (BDI), i.e., Full BDI_Last, with integration of a sacrificial Si0.5Ge0.5 layer was proposed and demonstrated in a stacked Si nanosheet gate-all-around (NS-GAA) device structure using TCAD simulations. The proposed full BDI scheme flow is compatible with the main process flow of NS-GAA transistor fabrication and provides a large window for process fluctuations, such as the thickness of the S/D recess. It is an ingenious solution to insert the dielectric material under the source, drain and gate regions to remove the parasitic channel. Moreover, because the S/D-first scheme decreases the problem of high-quality S/D epitaxy, the innovative fabrication scheme introduces full BDI formation after S/D epitaxy to mitigate the difficulty of providing stress engineering in the full BDI formation before S/D epitaxy (Full BDI_First). The electrical performance of Full BDI_Last is demonstrated by a 4.78-fold increase in the drive current compared to Full BDI_First. Furthermore, compared to traditional punch through stoppers (PTSs), the proposed Full BDI_Last technology could potentially provide an improved short channel behavior and good immunity against parasitic gate capacitance in NS-GAA devices. For the assessed inverter ring oscillator (RO), applying the Full BDI_Last scheme allows the operating speed to be increased by 15.2% and 6.2% at the same power, or alternatively enables an 18.9% and 6.8% lower power consumption at the same speed compared with the PTS and Full BDI_First schemes, respectively. The observations confirm that the novel Full BDI_Last scheme incorporated into an NS-GAA device can be utilized to enable superior characteristics to benefit the performance of integrated circuits.
RESUMO
In this paper, nanosheet deformation during channel release has been investigated and discussed in Gate-All-Around (GAA) transistors. Structures with different source/drain size and stacked Si nanosheet lengths were designed and fabricated. The experiment of channel release showed that the stress caused serious deformation to suspended nanosheets. With the guidance of the experiment result, based on simulation studies using the COMSOL Multiphysics and Sentaurus tools, it is confirmed that the stress applied on the channel from source/drain plays an important role in nanosheet deformation during the fabrication process. The deformation of Si nanosheets would cause a serious degradation of the device performance due to an inability to control the work function of the metal gate. This study proposed that the uniformly stacked GAA nanosheets structure could be successfully demonstrated with suitable channel stress engineering provided by fitting S/D size and an appropriate channel length. The conclusions provide useful guidelines for future stacked GAA transistors' design and fabrication.