Field-flow fractionation - an excellent tool for fractionation, isolation and/or purification of biomacromolecules.

Field-flow fractionation (FFF) with its several variants, has developed into a mature methodology. The scope of the FFF investigations has expanded, covering both a wide range of basic studies and especially a wide range of analytical applications. Special attention of this review is given to the achievements of FFF with reference to recent applications in the fractionation, isolation, and purification of biomacromolecules, and from which especially those of (in alphabetical order) bacteria, cells, extracellular vesicles, liposomes, lipoproteins, nucleic acids, and viruses and virus-like particles. In evaluating the major approaches and trends demonstrated since 2012, the most significant biomacromolecule applications are compiled in tables. It is also evident that asymmetrical flow field-flow fractionation is by far the most dominant technique in the studies. The industry has also shown current interest in FFF and adopted it in some sophisticated fields. FFF, in combination with appropriate detectors, handles biomacromolecules in open channel in a gentle way due to the lack of shear forces and unwanted interactions caused by the stationary phase present in chromatography. In addition, in isolation and purification of biomacromolecules quite high yields can be achieved under optimal conditions.

Assessment of physicochemical properties of sorbent materials in passive and active sampling systems towards gaseous nitrogen-containing compounds.

The adsorption and desorption behavior of volatile nitrogen-containing compounds in vapor phase by solid-phase microextraction Arrow (SPME-Arrow) and in-tube extraction (ITEX) sampling systems, were investigated experimentally using gas chromatography-mass spectrometry. Three different SPME-Arrow coating materials, DVB/PDMS, MCM-41, and MCM-41-TP and two ITEX adsorbents, TENAX-GR and MCM-41-TP were compared to clarify the selectivity of the sorbents towards nitrogen-containing compounds. In addition, saturated vapor pressures for these compounds were estimated, both experimentally and theoretically. In this study, the adsorption of nitrogen-containing compounds on various adsorbents followed the Elovich model well, while a pseudo-first-order kinetics model best described the desorption kinetics. Pore volume and pore sizes of the coating sorbents were essential parameters for the determination of the adsorption performance for the SPME-Arrow sampling system. MCM-41-TP coating with the smallest pore size gave the slowest adsorption rate compared to that of DVB/PDMS and MCM-41 in the SPME-Arrow sampling system. Both adsorbent and adsorbate properties, such as hydrophobicity and basicity, affected the adsorption and desorption kinetics in SPME-Arrow system. The adsorption and desorption rates of studied C6H15N isomers in the MCM-41 and MCM-41-TP sorbent materials of SPME-Arrow system were higher for dipropylamine and triethylamine (branched amines) than for hexylamine (linear chain amines). DVB/PDMS-SPME-Arrow gave fast adsorption rates for the aromatic-ringed pyridine and o-toluidine. All studied nitrogen-containing compounds demonstrated high desorption rates with DVB/PDMS-SPME-Arrow. Chemisorption and physisorption were the sorption mechanisms in MCM-41- and MCM-41-TP- SPME-Arrow, but additional experiments are needed to confirm this. An active sampling technique ITEX gave comparable adsorption and desorption rates on the selective MCM-41-TP and universal TENAX-GR sorbent materials for all the compounds studied. Vapor pressures of nitrogen-containing compounds were experimentally estimated by using retention index approach and these values were compared with the theoretical ones, calculated using the COnductor-like Screening MOdel for Real Solvent (COSMO-RS) model. Both values agreed well with those found in the literature proving that these methods can be successfully used in predicting VOC's vapor pressures, e.g. for the formation of secondary organic aerosols.

Automated On-Line Isolation and Fractionation Method for Subpopulations of Extracellular Vesicles.

Immunoaffinity chromatography (IAC) with selective antibodies immobilized on polymeric monolithic disk columns enables selective isolation of biomacromolecules from human plasma, while asymmetrical flow field-flow fractionation (AsFlFFF or AF4) can be used for further fractionation of relevant subpopulations of biomacromolecules (e.g., small dense low-density lipoproteins, exomeres, and exosomes) from the isolates. Here we describe how the isolation and fractionation of subpopulations of extracellular vesicles can be achieved without the presence of lipoproteins using on-line coupled IAC-AsFlFFF. With the developed methodology, it is possible to have fast, reliable, and reproducible automated isolation and fractionation of challenging biomacromolecules from human plasma with a high purity and high yields of subpopulations.

Evaluation of VOCs from fungal strains, building insulation materials and indoor air by solid phase microextraction arrow, thermal desorption-gas chromatography-mass spectrometry and machine learning approaches.

Solid phase microextraction Arrow and thermal desorption-gas chromatography-mass spectrometry allowed the collection and evaluation of volatile organic compounds (VOCs) emitted by fungal cultures from building insulation materials and in indoor air. Principal component analysis, linear discriminant analysis and supported vector machine were used for visualization and statistical assessment of differences between samples. In addition, a screening tool based on the soft independent modelling of class analogies (SIMCA) was developed for identification of fungal contamination of indoor air. Ten different fungal strains, incubated under ambient and microaerophilic conditions, were analyzed for time period ranging from 5 to 29 days after inoculation resulting in a total of 140 samples. In addition, the effect of additives on the fungal growing media was studied. The total number of compounds and concentration values were used for the evaluation of the results. Clear differences were observed for VOC profiles emitted by different fungal strains by exploiting long chain alcohols (3-octanol, 1-hexanol and 2-octen-1-ol) and sesquiterpenes (farnesene, cuprene). The analysis of glass-wool and cellulose based building insulation materials (3 samples) gave clear differences, mainly for oxygenated compounds (ethyl acetate and hexanal) and benzenoids (benzaldehyde). Moreover, the comparison of indoor air and insulation materials collected from a house with fungal indoor air problems indicated that 42% of the VOCs were found in both samples. The analysis of 52 indoor air samples demonstrated clear differences in their VOC profiles, especially for hydrocarbons, and between control (44 samples) and indoor air problem houses (8 samples). Finally, the SIMCA model enabled to recognize differences between control and fungi contaminated houses with a prediction capacity over 84%.

Marination increased tyramine levels in rainbow trout fillet strips packaged under modified atmosphere.

Marinades are increasingly used to manufacture raw fish products. In corresponding meats, marinating is known to have a major effect on the composition of the microbiome, but the effect of marinating on fish is not known as well. This knowledge gap prompted our study of the microbial ecology and amine formation in marinated and unmarinated modified atmosphere commercially packaged rainbow trout fillet strips. According to our findings, marination increased the maximum concentrations (7-8 log CFU/g) of psychrotrophic bacteria by one logarithmic unit and led to 5 times higher average tyramine concentrations than the corresponding unmarinated product. Instead, trimethylamine concentrations were 30 times higher in the unmarinated product than those in the marinated one. According to the 16 S rRNA sequence analyses, lactic acid bacteria (LAB) predominated in the marinated strips one day after the use-by date, whereas in the unmarinated strips Fusobacteriaceae and LAB were the dominating taxa. Based on the culture-dependent analysis, Latilactobacillus fuchuensis was the prevailing LAB in both products. Since the subset of L. fuchuensis strains tested was able to produce tyramine in vitro, we hypothesise that the use of the acidic marinade activated the production of tyrosine-decarboxylating enzymes in L. fuchuensis and led to the increased tyramine concentrations.

Raman spectroscopy combined with comprehensive gas chromatography for label-free characterization of plasma-derived extracellular vesicle subpopulations.

Raman spectroscopy together with comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GCxGC-TOFMS) was employed to characterize exomere- (<50 nm) and exosome-sized (50-80 nm) EVs isolated from human plasma by the novel on-line immunoaffinity chromatography - asymmetric flow field-flow fractionation method. CD9+, CD63+, and CD81+ EVs were selected to represent general EV subpopulations secreted into plasma, while CD61+ EVs represented the specific EV subset derived from platelets. Raman spectroscopy could distinguish EVs from non-EV particles, including apolipoprotein B-100-containing lipoproteins, signifying its potential in EV purity assessment. Moreover, platelet-derived (CD61+) EVs of both exomere and exosome sizes were discriminated from other EV subpopulations due to different biochemical compositions. Further investigations demonstrated composition differences between exomere- and exosome-sized EVs, confirming the applicability of Raman spectroscopy in distinguishing EVs, not only from different origins but also sizes. In addition, fatty acids that act as building blocks for lipids and membranes in EVs were studied by GCxGC-TOF-MS. The results achieved highlighted differences in EV fatty acid compositions in both esterified (membrane lipids) and non-esterified (free fatty acids) fractions, indicating possible differences in membrane structures, biological functions, and roles in cell-to-cell communications of EV subpopulations.

Kinetics and interaction studies of anti-tetraspanin antibodies and ICAM-1 with extracellular vesicle subpopulations using continuous flow quartz crystal microbalance biosensor.

Continuous flow quartz crystal microbalance (QCM) was utilized to study binding kinetics between EV subpopulations (exomere- and exosome-sized EVs) and four affinity ligands: monoclonal antibodies against tetraspanins (anti-CD9, anti-CD63, and anti-CD81) and recombinant intercellular adhesion molecule-1 (ICAM-1) or CD54 protein). High purity CD9+, CD63+, and CD81+ EV subpopulations of <50 nm exomeres and 50-80 nm exosomes were isolated and fractionated using our recently developed on-line coupled immunoaffinity chromatography - asymmetric flow field-flow fractionation system. Adaptive Interaction Distribution Algorithm (AIDA), specifically designed for the analysis of complex biological interactions, was used with a four-step procedure for reliable estimation of the degree of heterogeneity in rate constant distributions. Interactions between exomere-sized EVs and anti-tetraspanin antibodies demonstrated two interaction sites with comparable binding kinetics and estimated dissociation constants Kd ranging from nM to fM. Exomeres exhibited slightly higher affinity compared to exosomes. The highest affinity with anti-tetraspanin antibodies was achieved with CD63+ EVs. The interaction of EV subpopulations with ICAM-1 involved in cell internalization of EVs was also investigated. EV - ICAM-1 interaction was also of high affinity (nM to pM range) with overall lower affinity compared to the interactions of anti-tetraspanin antibodies and EVs. Our findings proved that QCM is a valuable label-free tool for kinetic studies with limited sample concentration, and that advanced algorithms, such as AIDA, are crucial for proper determination of kinetic heterogeneity. To the best of our knowledge, this is the first kinetic study on the interaction between plasma-derived EV subpopulations and anti-tetraspanin antibodies and ICAM-1.

Aerial drone furnished with miniaturized versatile air sampling systems for selective collection of nitrogen containing compounds in boreal forest.

A wide variety of nitrogen-containing compounds are present in the environment, which contributes to air pollution and new particle formation, for example. These eventually affect human health and the climate. With all this consideration, there is a growing interest in the development of efficient and reliable methods to determine these compounds in the atmosphere. In this study, titanium hydrogen phosphate-modified Mobil Composition of Matter No. 41 was used as sorbent material for in-tube extraction (ITEX) sampling system, to selectively collect nitrogen-containing compounds from natural air samples. The effect of sampling accessories, based on adsorbent coatings (with Tenax-GR as an adsorbent material) and polytetrafluoroethylene filters, was studied to improve the selectivity of the sampling system and to remove particles. Aerial drone with miniaturized air sampling system was employed for the reliable collection of nitrogen-containing compounds in both gas phase and aerosol particles. A total of 170 air samples were collected in July 2020 at the SMEAR II station, Finland to evaluate nitrogen-containing compounds diurnal patterns and vertical profiles (0.25, 5, 50, and 150 m). More than twenty nitrogen-containing compounds, such as aliphatic amines, imines, imidazoles, and pyridines, were identified, quantified or semi-quantified. The average concentrations of detected aliphatic amines at the altitude of 50 m were up to 40.4 ng m-3 (dimethylamine) in gas phase and 128 ng m-3 (ethylamine) in aerosol particles. Among nitrogen-containing compounds detected, pyridine gave the highest average concentration of 746 ng m-3 in gas phase and 644 ng m-3 in particle phase.

Quantitative analysis and spatial and temporal distribution of volatile organic compounds in atmospheric air by utilizing drone with miniaturized samplers.

Our second generation air sampling drone system, allowing the simultaneous use of four solid phase microextraction (SPME) Arrow and four in-tube extraction (ITEX) units, was employed for collection of atmospheric air samples at different spatial and temporal dimensions. SPME Arrow coated with two types of materials and ITEX with 10% polyacrylonitrile as sorbent were used to give a more comprehensive chemical characterization of the collected air samples. Before field sampling, miniaturized samplers went through quality control and assurance in terms of reproducibility (RSD ≤14.1%, N = 4), equilibrium time (≥10 min), breakthrough volume (1.8 L) and storage time (up to 48 h). 128 air samples were collected under optimal sampling conditions from July to September 2019 at the SMEAR II station and Qvidja farm, Finland. 347 VOCs were identified in the air samples either on-site or in the laboratory by thermal desorption gas chromatography - mass spectrometry, and they were quantified/semiquantified using Partial Least Squares Regression models. Individual models were developed for the different coatings and packing materials using gas phase standards obtained by an automatic permeation system. Average gas phase VOC concentrations ranged from 0.1 (toluene, the SMEAR II station) to 680 ng L-1 (acetone, Qvidja farm). Average VOC concentrations in aerosols ranged from 0.1 (1,4-cyclohexadiene, the SMEAR II station) to 2287 ng L-1 (megastigma-4,6,8-triene, Qvidja farm). Clear differences in results were seen for samples collected at the SMEAR II station and Qvidja farm, between VOC compositions in gas phase and aerosols, and between the sampling site and height.

Capillary electrophoresis and liquid chromatography for determining steroids in concentrates of purified water from Päijänne Lake.

The research was done with partial filling micellar electrokinetic chromatography, microemulsion electrokinetic chromatography, and ultra-high performance liquid chromatography. The study focuses on determination of male and female steroids from cold and hot tap water of households in Helsinki City. The district´s raw water is made run from Päijänne Lake through a water tunnel to the purification plants in Helsinki area. The effluents delivered from the plants to households as tap water were sampled and used for the study. They were concentrated with solid phase extraction to exceed the detection limits of the three methods. With partial filling method the limits were 0.50, 0.48, 0.33, and 0.50 mg/L for androsterone, testosterone, progesterone, and testosterone-glucuronide, respectively. In microemulsion method the limit values were 1.33, 1.11, and 0.40 mg/L for androsterone, testosterone, and progesterone, respectively, and 0.83, 0.45, and 0.50 mg/L for hydrocortisone, 17-α-hydroxyprogesterone, and 17-α-methyltestosterone, respectively. In the tap water samples, progesterone concentrations represented the highest values being 0.22 and 1.18 ng/L in cold and hot water, respectively. They also contained testosterone (in all samples), its glucuronide metabolite (in 25% of the samples), and androstenedione (in 75% of the samples). The ultra-high liquid chromatographic method with mass spectrometric detection was used for identification of the steroids at µg/L level.

Modern isolation and separation techniques for extracellular vesicles.

Extracellular vesicles (EVs) are heterogenous membrane-bound vesicles released from various origins. EVs play a crucial role in cellular communication and mediate several physiological and pathological processes, highlighting their potential therapeutic and diagnostic applications. Due to the rapid increase in interests and needs to elucidate EV properties and functions, numerous isolation and separation approaches for EVs have been developed to overcome limitations of conventional techniques, such as ultracentrifugation. This review focuses on recently emerging and modern EV isolation and separation techniques, including size-, charge-, and affinity-based techniques while excluding ultracentrifugation and precipitation-based techniques due to their multiple limitations. The advantages and drawbacks of each technique are discussed together with insights into their applications. Emerging approaches all share similar features in terms of being time-effective, easy-to-operate, and capable of providing EVs with suitable and desirable purity and integrity for applications of interest. Combination and hyphenation of techniques have been used for EV isolation and separation to yield EVs with the best quality. The most recent development using an automated on-line system including selective affinity-based trapping unit and asymmetrical flow field-flow fractionation allows reliable isolation and fractionation of EV subpopulations from human plasma.

Broadband Laser-Based Infrared Detector for Gas Chromatography.

Cantilever-enhanced photoacoustic spectroscopy coupled with gas chromatography is used to quantitatively analyze a mixture of alcohols in a quasi-online manner. A full identification and quantification of all analytes are achieved based on their spectral fingerprints using a widely tunable continuous-wave laser as a light source. This can be done even in the case of interfering column/septum bleed or simultaneously eluted peaks. The combination of photoacoustic spectroscopy and gas chromatography offers a viable solution for compact and portable instruments in applications that require straightforward analyses with no consumables.

Automated On-Line Isolation and Fractionation System for Nanosized Biomacromolecules from Human Plasma.

An automated on-line isolation and fractionation system including controlling software was developed for selected nanosized biomacromolecules from human plasma by on-line coupled immunoaffinity chromatography-asymmetric flow field-flow fractionation (IAC-AsFlFFF). The on-line system was versatile, only different monoclonal antibodies, anti-apolipoprotein B-100, anti-CD9, or anti-CD61, were immobilized on monolithic disk columns for isolation of lipoproteins and extracellular vesicles (EVs). The platelet-derived CD61-positive EVs and CD9-positive EVs, isolated by IAC, were further fractionated by AsFlFFF to their size-based subpopulations (e.g., exomeres and exosomes) for further analysis. Field-emission scanning electron microscopy elucidated the morphology of the subpopulations, and 20 free amino acids and glucose in EV subpopulations were identified and quantified in the ng/mL range using hydrophilic interaction liquid chromatography-tandem mass spectrometry (HILIC-MS/MS). The study revealed that there were significant differences between EV origin and size-based subpopulations. The on-line coupled IAC-AsFlFFF system was successfully programmed for reliable execution of 10 sequential isolation and fractionation cycles (37-80 min per cycle) with minimal operator involvement, minimal sample losses, and contamination. The relative standard deviations (RSD) between the cycles for human plasma samples were 0.84-6.6%.

Electrokinetic characterization of extracellular vesicles with capillary electrophoresis: A new tool for their identification and quantification.

This work reports on the development of the first capillary electrophoresis methodology for the elucidation of extracellular vesicles' (EVs) electrokinetic distributions. The approach is based on capillary electrophoresis coupled with laser-induced fluorescent (LIF) detection for the identification and quantification of EVs after their isolation. Sensitive detection of these nanometric entities was possible thanks to an 'inorganic-species-free' background electrolyte. This electrolyte was made up of weakly charged molecules at very high concentrations to stabilize EVs, and an intra-membrane labelling approach was used to prevent EV morphology modification. The limit of detection for EVs achieved using the developed CE-LIF method reached 8 × 109 EV/mL, whereas the calibration curve was acquired from 1.22 × 1010 to 1.20 × 1011 EV/mL. The CE-LIF approach was applied to provide the electrokinetic distributions of various EVs of animal and human origins, and visualize different EV subpopulations from our recently developed high-yield EV isolation method.

Layered double hydroxide/poly(vinylpyrrolidone) coated solid phase microextraction Arrow for the determination of volatile organic compounds in water.

Today, wide variety of adsorbents have been developed for sample pretreatment to concentrate and separate harmful substances. However, only a few solid phase microextraction Arrow adsorbents are commercially available. In this study, we developed a new solid phase microextraction Arrow coating, in which nanosheets layered double hydroxides and poly(vinylpyrrolidone) were utilized as the extraction phase and poly(vinyl chloride) as the adhesive. This new coating entailed higher extraction capacity for several volatile organic compounds (allyl methyl sulfide, methyl propyl sulfide, 3-pentanone, 2-butanone, and methyl isobutyl ketone) compared to the commercial Carboxen 1000/polydimethylsiloxane coating. Fabrication parameters for the coating were optimized and extraction and desorption conditions were investigated. The validation of the new solid phase microextraction Arrow coating was accomplished using water sample spiked with volatile organic compounds. Under the optimal conditions, the limits of quantification for the five volatile organic compounds by the new solid phase microextraction Arrow coating and developed gas chromatography with mass spectrometry method were in the range of 0.2-4.6 ng/mL. The proposed method was briefly applied for enrichment of volatile organic compounds in sludge.

Comparison of multiple calibration approaches for the determination of volatile organic compounds in air samples by solid phase microextraction Arrow and in-tube extraction.

Several calibration approaches were evaluated for the quantitation of volatile organic compounds in air using miniaturized exhaustive and non-exhaustive sampling techniques, such as in-tube extraction (ITEX) and solid phase microextraction (SPME) Arrow. Eleven compounds, 2-ethyl-hexanol, hexanal, nonanal, toluene, ethyl-benzene, methyl isobutyl ketone, acetophenone, p-cymene, α-pinene, trimethylamine and triethylamine, all them found in the natural air samples, were selected as model analytes. Liquid injection, liquid standard addition to the sorbent bed and gas phase standards provided by an automatic permeation system, were evaluated in the case of ITEX packed with laboratory-made 10% polyacrylonitrile (PAN) material. Two different approaches, based on sampling of gas phase compounds from the permeation system and from sample vial containing gas phase standards, were evaluated for SPME Arrow with two different coatings, commercial divinylbenzene-poly(dimethylsiloxane) (DVB-PDMS) and laboratory-made mesoporous Mobil Composition of Matter No. 41 (MCM-41). In addition, interface model approach was used for the calculation of the real concentration of the target analytes in the sample from the total amount of analytes injected into the GC-MS in the case of SPME Arrow. Similar results were obtained with the different approaches used for the quantitation by ITEX and SPME Arrow. However, the use of gas phase standards with sample matrix similar to the natural samples, allowed the permeation system to provide the most reliable results for the quantitation of the target analytes. For this approach, linearity (expressed as r2 values) ranged between 0.991 and 0.999. The limit of detection ranged from 0.5 µg/m3 (trimethylamine, MCM-41) to 2.2 × 10-4 µg/m3 (methyl isobutyl ketone, MCM-41). In addition, the use of the fully automated permeation system provided good reproducibility values that were between 1.4% (acetophenone, MCM-41) and 7.8% (methyl isobutyl ketone, 10% PAN). The linear ranges were at least 3 order of magnitude for all the studied analytes with the exception of the calibration curve developed for trimethylamine with SPME Arrow (linear ranges between LOQ and 4.9 µg/m3 (DVB-PDMS) and LOQ and 9.8 µg/m3 (MCM-41)).

Fast isolation of highly specific population of platelet-derived extracellular vesicles from blood plasma by affinity monolithic column, immobilized with anti-human CD61 antibody.

A new, fast and selective immunoaffinity chromatographic method including a methacrylate-based convective interaction media (CIM®) disk monolithic column, immobilized with anti-human CD61 antibody, was developed for the isolation of CD61-containing platelet-derived extracellular vesicles (EVs) from plasma. The isolated EVs were detected and size characterized by asymmetrical flow field-flow fractionation (AsFlFFF) with multi-angle light-scattering (MALS) and dynamic light-scattering (DLS) detection, and further confirmed by nanoparticle tracking analysis (NTA) and transmission electron microscopy (TEM). The mean size of platelet-derived EV isolates from the anti-CD61 CIM® disk monolithic column were 174 nm (SD 60 nm) based on the NTA results. These results indicated a successful isolation of platelet-derived EVs, which was confirmed by Western blotting the isolates against the EV-specific markers CD9 and TSG101 together with transmission electron microscopy. Additional elucidation of MALS and DLS data provided detailed information of the size distribution of the isolated fractions, confirming the successful isolation of also small platelet-derived EVs ranging from 30 to 130 nm based on the hydrodynamic radii. The isolation procedure took only 19 min and the time can be even further decreased by increasing the flow rate. The same immunoaffinity chromatographic procedure, following AsFlFFF allowed also the isolation and characterization of platelet-derived EVs from plasma in under 60 min. Since it is possible to regenerate the anti-CD61 disk for multiple uses, the methodology developed in this study provides a viable substitution and addition to the conventional EV isolation procedures.

Rapid affinity chromatographic isolation method for LDL in human plasma by immobilized chondroitin-6-sulfate and anti-apoB-100 antibody monolithic disks in tandem.

Low-density lipoprotein (LDL) is considered the major risk factor for the development of atherosclerotic cardiovascular diseases (ASCVDs). A novel and rapid method for the isolation of LDL from human plasma was developed utilising affinity chromatography with monolithic stationary supports. The isolation method consisted of two polymeric monolithic disk columns, one immobilized with chondroitin-6-sulfate (C6S) and the other with apolipoprotein B-100 monoclonal antibody (anti-apoB-100 mAb). The first disk with C6S was targeted to remove chylomicrons, very-low-density lipoprotein (VLDL) particles, and their remnants including intermediate-density lipoprotein (IDL) particles, thus allowing the remaining major lipoprotein species, i.e. LDL, lipoprotein(a) (Lp(a)), and high-density lipoprotein (HDL) to flow to the anti-apoB-100 disk. The second disk captured LDL particles via the anti-apoB-100 mAb attached on the disk surface in a highly specific manner, permitting the selective LDL isolation. The success of LDL isolation was confirmed by different techniques including quartz crystal microbalance. In addition, the method developed gave comparable results with ultracentrifugation, conventionally used as a standard method. The reliable results achieved together with a short isolation time (less than 30 min) suggest the method to be suitable for clinically relevant LDL functional assays.

Selective extraction of aliphatic amines by functionalized mesoporous silica-coated solid phase microextraction Arrow.

Mesoporous silica-coated solid phase microextraction (SPME) Arrow systems were developed for capturing of low-molecular-weight aliphatic amines (LMWAAs) from complicated sample matrices. Specifically, silicas of type MCM-41, SBA-15 and KIT-6 were chosen as substrates to afford size-exclusion selectivity. They possess ordered multidimensional pore-channel structures and mesopore sizes between 3.8 and 8.2 nm. Their surface acidity was enhanced by grafting them with a layer of titanium hydrogenphosphate (-TP). This enhanced the chemical selectivity for basic LMWAAs. The siliceous coatings increased the extraction of ethylamine, diethylamine (DEA) and triethylamine (TEA) by factors of 18.6-102.5, 4.8-10.8 and 2.6-4.0, respectively, when compared to the commercial SPME Arrow with polydimethylsiloxane/divinylbenzene coating. Among them, the MCM-41 and MCM-41-TP coated SPME Arrows demonstrated exceptional selectivity towards LMWAAs that were quantified by gas chromatography-mass spectrometry (GC-MS). The total peak area ratios of LMWAAs/ten competing compounds were 25.4 and 36.3, respectively. The extraction equilibrium was reached within 20-30 min. The MCM-41 and MCM-41-TP derived SPME Arrows gave very similar results (18.4 ± 2.1-376 ± 12 ng g-1 to DEA and TEA) when applied to urban mushroom samples. SPME Arrow with MCM-41 coatings followed by GC-MS was applied also to the analysis of atmospheric air and urine samples resulting in high selectivity due to the size and mesoporous structure of the functionalized silica, and its chemical interactions with the LMWAAs. Graphical abstract Scheme of synthesis of the MCM-41 silicas, and the preparation of solid phase microextraction Arrow coatings. They were employed for selective capturing of aliphatic amines from complex sample matrices, followed by gas chromatography-mass spectrometry.