Competitive sorption experiments reveal new regression models to predict PhACs sorption on carbonaceous materials.

Sorption of hydrophobic organic contaminants onto thermally altered carbonaceous materials (TACM) constitutes a widely used technology for remediation of polluted waters. This process is typically described by sorption isotherms, with one of the most used models, the Polanyi-Dubinin-Manes (PDM) equation, including water solubility (Sw) as a normalizing factor. In case of pharmaceutical active compounds (PhACs), Sw depends on the pH of the environment due to the ionic/ionizable behavior of these chemicals, a fact frequently ignored in sorption studies of PhACs. In this work, we set the theoretical framework to include the variation of Sw with pH in the definition of the PDM model, and we applied this approach to describe the effect of ambient pH in the competitive sorption of three commonly detected PhACs (carbamazepine, ibuprofen, and sulfamethoxazole) onto three carbonaceous sorbents (biochar, powder activated carbon, and colloidal activated carbon). Changes in the ambient pH and hence in the hydrophobicity of the compounds could explain the strong variations observed in single-solute sorption and also in competitive sorption. Furthermore, Sw was used as a parameter for the linear regression model of sorption coefficients of our experiments, suggesting the incorporation of this variable as an improvement to existing approaches for prediction of PhACs sorption onto TACM.

Role of Fe decoration on the oxygen evolving state of Co3O4 nanocatalysts.

The production of green hydrogen through alkaline water electrolysis is the key technology for the future carbon-neutral industry. Nanocrystalline Co3O4 catalysts are highly promising electrocatalysts for the oxygen evolution reaction and their activity strongly benefits from Fe surface decoration. However, limited knowledge of decisive catalyst motifs at the atomic level during oxygen evolution prevents their knowledge-driven optimization. Here, we employ a variety of operando spectroscopic methods to unveil how Fe decoration increases the catalytic activity of Co3O4 nanocatalysts as well as steer the (near-surface) active state formation. Our study shows a link of the termination-dependent Fe decoration to the activity enhancement and a significantly stronger Co3O4 near-surface (structural) adaptation under the reaction conditions. The near-surface Fe- and Co-O species accumulate an oxidative charge and undergo a reversible bond contraction during the catalytic process. Moreover, our work demonstrates the importance of low coordination surface sites on the Co3O4 host to ensure an efficient Fe-induced activity enhancement, providing another puzzle piece to facilitate optimized catalyst design.

Catalytic hydroboration of aldehydes and ketones with an electron-rich acyclic metallasilylene.

The application of main group metal complexes in catalytic reactions is of increasing interest. Here we show that the electron-rich, acyclic metallasilylene L'(Cl)GaSiL C (L' = HC[C(Me)NDipp]2, Dipp = 2,6-iPr2C6H3; L = PhC(NtBu)2) acts as a precatalyst in the hydroboration of aldehydes with HBPin. Mechanistic studies with iso-valeraldehyde show that silylene C first reacts with the aldehyde with [2 + 1] cycloaddition in an oxidative addition to the oxasilirane 1, followed by formation of the alkoxysilylene LSiOCH[Ga(Cl)L']CH2CHMe2 (2), whose formation formally results from a reductive elimination reaction at the Si center. Alkoxysilylene 2 represents the active hydroboration catalyst and shows the highest catalytic activity with n-hexanal (reaction time: 40 min, yield: >99%, TOF = 150 h-1) at room temperature with a catalytic load of only 1 mol%. Furthermore, the hydroboration reaction catalysed by alkoxysilylene 2 is a living reaction with good chemoselectivity. Quantum chemical calculations not only provide mechanistic insights into the formation of alkoxysilylene 2 but also show that two completely different hydroboration mechanisms are possible.

Activation of non-polar bonds by an electron-rich gallagermylene.

The electron-rich germylene LGa(µ-Cl)GeArMes (1) (L = CH[C(Me)N(Dipp)]2, Dipp = 2,6-iPr2C6H3, ArMes = 2,6-Mes2C6H3, Mes = 2,4,6-Me3C6H2) shows promising potential in the σ-bond activation of unpolar molecules as is shown in oxidative addition reactions with H2 and P4, yielding L(Cl)GaGe(H)2ArMes (2) and L(Cl)Ga(P4)GeArMes (3). Compounds 2 and 3 were characterised spectroscopically (1H, 13C{1H}, (31P{1H}), IR) and by single-crystal X-ray diffraction (sc-XRD).

Metal-metal cooperativity boosts Lewis basicity and reduction properties of the bis(gallanediyl) CyL2Ga2.

The interplay of two proximate gallium centres equips the bimetallic complex CyL2Ga2 (1, CyL2 = 1,2-trans-Cy[NC(Me)C(H)C(Me)N(Dip)]2, Dip = 2,6-i-Pr2C6H3) with increased Lewis basicity and higher reducing power compared to the monometallic gallanediyl LGa (2, L = HC[MeCN(Dip)]2) as evidenced by cross-over experiments. Quantum chemical calculations were employed to support the experimental findings.

From Neutral Diarsenes to Diarsene Radical Ions and Diarsene Dications.

Diarsene [L(MeO)GaAs]2 (L=HC[C(Me)N(Ar)]2, Ar=2,6-iPr2C6H3, 4) reacts with MeOTf and MeNHC (MeNHC=1,3,4,5-tetra-methylimidazol-2-ylidene) to the diarsene [L(TfO)GaAs]2 (5) and the carbene-coordinated diarsene [L(MeO)GaAsAs(MeNHC)Ga(OMe)L] (6). The NHC-coordination results in an inversion of the redox properties of the diarsene 4, which shows only a reversible reduction event at E1/2=-2.06 V vs Fc0/+1, whereas the carbene-coordinated diarsene 6 shows a reversible oxidation event at E1/2=-1.31 V vs Fc0/+1. Single electron transfer reactions of 4 and 6 yielded [K[2.2.2.]cryp][L(MeO)GaAs]2 (8) and [L(MeO)GaAsAs(MeNHC)-Ga(OMe)L][B(C6F5)4] (9) containing the radical anion [L(MeO)GaAs]2⋅- (8⋅-) and the NHC-coordinated radical cation [L(MeO)GaAsAs(MeNHC)Ga(OMe)L]⋅+ (9⋅+), respectively, while the salt-elimination reaction of the triflate-coordinated diarsene 5 with Na[B(C6F5)4] gave [LGaAs]2[B(C6F5)4]2 (11) containing the dication [LGaAs]2 2+ (112+). Compounds 1-11 were characterized by 1H and 13C NMR, EPR (8, 9), IR, and UV-Vis spectroscopy and by single crystal X-ray diffraction (sc-XRD). DFT calculations provided a detailed understanding of the electronic nature of the diarsenes (4, 6) and the radical ions (8⋅-, 9⋅+), respectively.

Gallaphosphene L(Cl)GaPGaL: A novel phosphinidene transfer reagent.

Gallaphosphene L(Cl)GaPGaL 1 (L=HC[C(Me)N(Ar)]2; Ar=2,6-iPr2C6H3) reacts with N-heterocyclic carbenes RNHC (RNHC=[CMeN(R)]2C; R=Me, iPr) to RNHC-coordinated phosphinidenes RNHC→PGa(Cl)L (R=Me 2 a, iPr 2 b) and with isonitriles RNC (R=iPr, Cy) to 1,3-phosphaazaallenes L(Cl)GaP=C=N-R (R=iPr 3 a, Cy 3 b), respectively. Quantum chemical calculations reveal that 2 a/2 b possess two localized lone pair of electrons, whereas 3 a/3 b only show one localized lone pair as was reported for gallaphosphene 1. 2 b reacts with 2.5 equivalents of a borane (THF ⋅ BH3) to the NHC-stabilized phosphinidene-borane complex [iPrNHC→P(BH2)]2(BH3)3 4 with concomitant formation of LGa(H)Cl 5. 2-5 are characterized by heteronuclear (1H, 13C{1H}, 31P{1H}) NMR and IR spectroscopy, elemental analysis, and single crystal X-ray diffraction (sc-XRD).

Structural characterization and reactivity of a room-temperature-stable, antiaromatic cyclopentadienyl cation salt.

The singlet states of cyclopentadienyl (Cp) cations are considered as true prototypes of an antiaromatic system. Unfortunately, their high intrinsic reactivity inhibited their isolation in the solid state as a salt, and controlled reactions are also scarce. Here we present the synthesis and solid state structure of the room-temperature-stable Cp cation salt [Cp(C6F5)5]+[Sb3F16]-. Although the aromatic triplet state of the [Cp(C6F5)5]+ cation is energetically favoured in the gas phase according to quantum chemical calculations, coordination of the cation by either [Sb3F16]- or C6F6 in the crystal lattice stabilizes the antiaromatic singlet state, which is present in the solid state. The calculated hydride and fluoride ion affinities of the [Cp(C6F5)5]+ cation are higher than those of the perfluorinated tritylium cation [C(C6F5)3]+. Reactions of [Cp(C6F5)5]+[Sb3F16]- with CO, which probably yields the corresponding carbonyl complex, and of radical Cp(C6F5)5∙ with selected model substrates (Cp2Fe, (Ph3C∙)2 and Cp*Al) are also presented.

Multiple ethylene activation by heteroleptic L(Cl)Ga-substituted germylenes.

Ethylene insertion into the Ga-Ge bond of the L(Cl)Ga-substituted germylene LGa(µ-Cl)GeDMP 1 (L = HC(C(Me)NAr)2, Ar = 2,6-iPr2C6H3; DMP = 2,6-Mes2C6H3, Mes = 2,4,6-Me3C6H2) at ambient temperature is followed by dimerization of the as-formed germylene to give the digermene 3, which further reacted with ethylene in a [2 + 2] cycloaddition to give the 1,2-digermacyclobutane 4. In marked contrast, the amino-substituted germylene L(Cl)GaGeN(SiMe3)Ar 2 reacted directly to the 1,2-digermacyclobutane 5. Quantum chemical calculations confirmed the assumed reaction mechanism, hence demonstrating the crucial role of the substituent on the reaction mechanism.

Homoleptic and heteroleptic ketodiiminate zinc complexes for the ROP of cyclic l-lactide.

Homo- and heteroleptic ketodiiminate zinc complexes L12Zn2 (1, L1 = [Me2NC2H4NC(Me)CH]2CO), L2(ZnCp)2 (2, L2 = [Me2NC3H6NC(Me)CH]2CO, Cp = C5H5) and L2HZnCp* (3, Cp* = C5Me5) were synthesized and characterized by 1H and 13C NMR and IR spectroscopy as well as by elemental analysis and single crystal X-ray diffraction (sc-XRD, 2, 3). The catalytical activity of heteroleptic complexes 2 and 3 were tested in the ring-opening polymerization (ROP) of l-lactide. Homobimetallic complex 2 showed the highest activity and selectivity for the synthesis of cyclic polylactide (cPLLA; TOF = 17 460 h-1) at 100 °C in toluene solution, while linear polymers are formed with mononuclear complex 3.

Syntheses and Structures of 5-Membered Heterocycles Featuring 1,2-Diphospha-1,3-Butadiene and Its Radical Anion.

LGa(P2 OC)cAAC 2 features a 1,2-diphospha-1,3-butadiene unit with a delocalized π-type HOMO and a π*-type LUMO according to DFT calculations. [LGa(P2 OC)cAAC][K(DB-18-c-6)] 3[K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene radical anion 3⋅- was isolated from the reaction of 2 with KC8 and dibenzo-18-crown-6. 3 reacted with [Fc][B(C6 F5 )4 ] (Fc=ferrocenium) to 2 and with TEMPO to [L-H Ga(P2 OC)cAAC][K(DB-18-c-6)] 4[K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene anion 4- . The solid state structures of 2, 3K(DB-18-c-6], and 4[K(DB-18-c-6] were determined by single crystal X-ray diffraction (sc-XRD).

Role of Soil Biofilms in Clogging and Fate of Pharmaceuticals: A Laboratory-Scale Column Experiment.

Contamination of groundwater with pharmaceutical active compounds (PhACs) increased over the last decades. Potential pathways of PhACs to groundwater include techniques such as irrigation, managed aquifer recharge, or bank filtration as well as natural processes such as losing streams of PhACs-loaded source waters. Usually, these systems are characterized by redox-active zones, where microorganisms grow and become immobilized by the formation of biofilms, structures that colonize the pore space and decrease the infiltration capacities, a phenomenon known as bioclogging. The goal of this work is to gain a deeper understanding of the influence of soil biofilms on hydraulic conductivity reduction and the fate of PhACs in the subsurface. For this purpose, we selected three PhACs with different physicochemical properties (carbamazepine, diclofenac, and metoprolol) and performed batch and column experiments using a natural soil, as it is and with the organic matter removed, under different biological conditions. We observed enhanced sorption and biodegradation for all PhACs in the system with higher biological activity. Bioclogging was more prevalent in the absence of organic matter. Our results differ from works using artificial porous media and thus reveal the importance of utilizing natural soils with organic matter in studies designed to assess the role of soil biofilms in bioclogging and the fate of PhACs in soils.

Metal-coordinated distibene and dibismuthene dications - isoelectronic analogues of butadiene dications.

We report the synthesis and solid-state structures of DMAP-coordinated ([L(DMAP)GaPn]2[OTf]2; Pn = Sb 3, Bi 4) and base-free dipnictene dications ([LGaPn]2[BArFx]2, Pn = Sb: x = 24, 5a; 20, 5b; Bi: x = 24, 6a; 20, 6b). Quantum chemical calculations indicate that the dications 52+ and 62+ represent isoelectronic analogues of the butadiene dication.

Snapshots of sequential polyphosphide rearrangement upon metallatetrylene addition.

Insertion and functionalization of gallasilylenes [LPhSi-Ga(Cl)LBDI] (LPh = PhC(NtBu)2; LBDI = [{2,6-iPr2C6H3NCMe}2CH]) into the cyclo-E5 rings of [Cp*Fe(η5-E5)] (Cp* = η5-C5Me5; E = P, As) are reported. Reactions of [Cp*Fe(η5-E5)] with gallasilylene result in E-E/Si-Ga bond cleavage and the insertion of the silylene in the cyclo-E5 rings. [(LPhSi-Ga(Cl)LBDI){(η4-P5)FeCp*}], in which the Si atom binds to the bent cyclo-P5 ring, was identified as a reaction intermediate. The ring-expansion products are stable at room temperature, while isomerization occurred at higher temperature, and the silylene moiety further migrates to the Fe atom, forming the corresponding ring-construction isomers. Furthermore, reaction of [Cp*Fe(η5-As5)] with the heavier gallagermylene [LPhGe-Ga(Cl)LBDI] was also investigated. All the isolated complexes represent rare examples of mixed group 13/14 iron polypnictogenides, which could only be synthesized by taking advantage of the cooperativity of the gallatetrylenes featuring low-valent Si(ii) or Ge(ii) and Lewis acidic Ga(iii) units/entities.

Deciphering the Structural and Chemical Transformations of Oxide Catalysts during Oxygen Evolution Reaction Using Quick X-ray Absorption Spectroscopy and Machine Learning.

Bimetallic transition-metal oxides, such as spinel-like CoxFe3-xO4 materials, are known as attractive catalysts for the oxygen evolution reaction (OER) in alkaline electrolytes. Nonetheless, unveiling the real active species and active states in these catalysts remains a challenge. The coexistence of metal ions in different chemical states and in different chemical environments, including disordered X-ray amorphous phases that all evolve under reaction conditions, hinders the application of common operando techniques. Here, we address this issue by relying on operando quick X-ray absorption fine structure spectroscopy, coupled with unsupervised and supervised machine learning methods. We use principal component analysis to understand the subtle changes in the X-ray absorption near-edge structure spectra and develop an artificial neural network to decipher the extended X-ray absorption fine structure spectra. This allows us to separately track the evolution of tetrahedrally and octahedrally coordinated species and to disentangle the chemical changes and several phase transitions taking place in CoxFe3-xO4 catalysts and on their active surface, related to the conversion of disordered oxides into spinel-like structures, transformation of spinels into active oxyhydroxides, and changes in the degree of spinel inversion in the course of the activation treatment and under OER conditions. By correlating the revealed structural changes with the distinct catalytic activity for a series of CoxFe3-xO4 samples, we elucidate the active species and OER mechanism.

Density-Dependence of Surface Transport in Tellurium-Enriched Nanograined Bulk Bi2 Te3.

Three-dimensional topological insulators (3D TI) exhibit conventional parabolic bulk bands and protected Dirac surface states. A thorough investigation of the different transport channels provided by the bulk and surface carriers using macroscopic samples may provide a path toward accessing superior surface transport properties. Bi2 Te3 materials make promising 3D TI models; however, due to their complicated defect chemistry, these materials have a high number of charge carriers in the bulk that dominate the transport, even as nanograined structures. To partially control the bulk charge carrier density, herein the synthesis of Te-enriched Bi2 Te3 nanoparticles is reported. The resulting nanoparticles are compacted into nanograined pellets of varying porosity to tailor the surface-to-volume ratio, thereby emphasizing the surface transport channels. The nanograined pellets are characterized by a combination of resistivity, Hall- and magneto-conductance measurements together with (THz) time-domain reflectivity measurements. Using the Hikami-Larkin-Nagaoka (HLN) model, a characteristic coherence length of ≈200 nm is reported that is considerably larger than the diameter of the nanograins. The different contributions from the bulk and surface carriers are disentangled by THz spectroscopy, thus emphasizing the dominant role of the surface carriers. The results strongly suggest that the surface transport carriers have overcome the hindrance imposed by nanoparticle boundaries.

A high-resolution monitoring station for the in situ assessment of nitrate-related redox processes at an agricultural site.

Biogeochemical redox processes control the chemical behavior of many major and trace elements, making their comprehension crucial for predicting and protecting environmental health. Nitrogen (N) is especially susceptible to changes in soil redox conditions and affects the cycles of other redox-sensitive species. Elevated N concentrations, in nitrate form, in agricultural soils and associated freshwater ecosystems constitute a problem in many parts of the world. Although a wide variety of measures have been adopted, their assessment through concentration measurements in groundwater and surface water of the different monitoring networks has shortcomings. Nitrate, as a non-point pollutant, is subject to several processes (e.g., transformation and retardation) before it is detected, making it impossible to evaluate measurements' effectiveness reliably. Thus, we designed and constructed a monitoring station featuring commercially available products and self-manufactured components at an agricultural site for the in situ assessment of nitrate-related processes by high-resolution monitoring of hydraulic (soil water content, matric potential, groundwater head) and hydrogeochemical variables (oxidation-reduction potential and groundwater and pore water chemistry) within the vadose zone and the shallow aquifer. The monitoring station has proven to be a reliable tool. Changes over depth and time of measured variables have been identified, allowing the detection of the transient behavior of the redox reactive zone and the interpretation of ongoing denitrification processes and other redox nitrate-triggered phenomena, such as uranium roll-front and selenium accumulation at the redox interface. Measuring both geochemical and soil water variables allows for the calculation of in situ solute inputs into the groundwater and their reaction rates.

Evaporation from the dried-up lake bed of Lake Urmia, Iran.

Lake Urmia in north-western Iran was once one of the world's largest hyper-saline lakes and represented a unique ecosystem for a number of endangered species. The lake's shrinking over the past decades has attracted considerable attention and several studies have addressed its water balance. Yet, evaporation of shallow groundwater from the dried-up lake bed has not been fully quantified - despite the appreciable size of these areas (approx. 4000 km2 in summer 2015). Here, we target this water cycle component by combining column experiments with upscaling and regionalisation techniques. In the experiments, we studied evaporation from two undisturbed soil cores from the exposed lake bed in a climate chamber, mimicking diurnal temperature and humidity variations in the three summer months of the study area. Despite the dropping water levels in the columns and the formation of salt crusts, evaporation rates remained remarkably constant (0.12 and 0.20 mm d-1). This suggests that the system is not driven by slow vapour diffusion, but controlled by capillary rise in the fine-grained sediments, ensuring steady water supply to the column surface. Thus, evaporation from the dried-up lake bed can be assumed to be largely independent from the unsaturated zone thickness (within the observed water level range) and evaporation rates can be simply upscaled and regionalised by considering the satellite-derived development of dried-up lake bed areas (1998-2020). In this time-period, estimated summer evaporation from the exposed lake bed reached maximum values of 0.04 and 0.07 km3 (summer 2015). While these absolute numbers are significant (comparable to the catchment's annual urban drinking water consumption), they correspond to only 4 and 7 % of the evaporation from the open lake surface (1.06 km3).

Single-entity Electrochemistry Unveils Dynamic Transformation during Tandem Catalysis of Cu2 O and Co3 O4 for Converting NO3 - to NH3.

Electrochemically converting nitrate to ammonia is an essential and sustainable approach to restoring the globally perturbed nitrogen cycle. The rational design of catalysts for the nitrate reduction reaction (NO3 RR) based on a detailed understanding of the reaction mechanism is of high significance. We report a Cu2 O+Co3 O4 tandem catalyst which enhances the NH3 production rate by ≈2.7-fold compared to Co3 O4 and ≈7.5-fold compared with Cu2 O, respectively, however, most importantly, we precisely place single Cu2 O and Co3 O4 cube-shaped nanoparticles individually and together on carbon nanoelectrodes provide insight into the mechanism of the tandem catalysis. The structural and phase evolution of the individual Cu2 O+Co3 O4 nanocubes during NO3 RR is unveiled using identical location transmission electron microscopy. Combining single-entity electrochemistry with precise nano-placement sheds light on the dynamic transformation of single catalyst particles during tandem catalysis in a direct way.

Crystal Plane-Related Oxygen-Evolution Activity of Single Hexagonal Co3 O4 Spinel Particles.

The electrocatalytic activity for the oxygen evolution reaction in alkaline electrolyte of hexagonal spinel Co3 O4 nanoparticles derived using scanning electrochemical cell microscopy (SECCM) is correlated with scanning electron microscopy and atomic force microscopy images of the droplet landing sites. A unique way to deconvolute the intrinsic catalytic activity of individual crystal facets of the hexagonal Co3 O4 spinel particle is demonstrated in terms of the turnover frequency (TOF) of surface Co atoms. The top surface exposing 111 crystal planes displayed a thickness-dependent TOF with a TOF of about 100 s-1 at a potential of 1.8 V vs. RHE and a particle thickness of 100 nm. The edge of the particle exposing (110) planes, however, showed an average TOF of 270±68 s-1 at 1.8 V vs. RHE and no correlation with particle thickness. The higher atomic density of Co atoms on the edge surface (2.5 times of the top) renders the overall catalytic activity of the edge planes significantly higher than that of the top planes. The use of a free-diffusing Os complex in the alkaline electrolyte revealed the low electrical conductivity through individual particles, which explains the thickness-dependent TOF of the top planes and could be a reason for the low activity of the top (111) planes.