White-Emitting Gold Nanocluster Assembly with Dynamic Color Tuning.

We report that constructed Au nanoclusters (NCs) can afford amazing white emission synergistically dictated by the Au(0)-dominated core-state fluorescence and Au(I)-governed surface-state phosphorescence, with record-high absolute quantum yields of 42.1% and 53.6% in the aqueous solution and powder state, respectively. Moreover, the dynamic color tuning is achieved in a wide warm-to-cold white-light range (with the correlated color temperature varied from 3426 to 24 973 K) by elaborately manipulating the ratio of Au(0) to Au(I) species and thus the electron transfer rate from staple motif to metal kernel. This study not only exemplifies the successful integration of multiple luminescent centers into metal NCs to accomplish efficient white-light emission but also inspires a feasible pathway toward customizing the optical properties of metal NCs by regulating electron transfer kinetics.

Modulation of Nucleation and Growth Kinetics of Perovskite Nanocrystals Enables Efficient and Spectrally Stable Pure-Red Light-Emitting Diodes.

Perovskite light-emitting diodes (PeLEDs) based on CsPb(Br/I)3 nanocrystals (NCs) usually suffer from severe spectral instability under operating voltage due to the poor-quality PeNCs. Herein, zeolite was utilized to prepare high-quality CsPb(Br/I)3 NCs via promoting the homogeneous nucleation and growth and suppressing the Ostwald ripening of PeNCs. In addition, the decomposed zeolite interacted strongly with PeNCs through Pb-O bonds and hydrogen bonds, which inhibited the formation of defects and suppressed halide ion migration, leading to an improved photoluminescence quantum yield (PLQY) and enhanced stability of PeNCs. Moreover, the strong binding affinity of decomposed zeolite to PeNCs contributed to the formation of homogeneous perovskite films with high PLQY. As a result, pure-red PeLEDs with Commission International de I'Eclairage (CIE) coordinates of (0.705, 0.291) were fabricated, approaching the Rec. 2020 red primary color. The devices achieved a peak external quantum efficiency of 23.0% and outstanding spectral stability.

High-Performance Blue Perovskite Light-Emitting Diodes Enabled by Synergistic Effect of Additives.

While quasi-two-dimensional (quasi-2D) perovskites have good properties of cascade energy transfer, high exciton binding energy, and high quantum efficiency, which will benefit high-efficiency blue PeLEDs, inefficient domain distribution management and unbalanced carrier transport impede device performance improvement. Herein, (2-(9H-carbazol-9-yl)ethyl)phosphonic acid (2PACz) and methyl 2-aminopyridine-4-carboxylate (MAC) were simultaneously introduced to a blue quasi-2D perovskite film. Relying on the synergistic effect of 2PACz and MAC, it not only modulates the phase distribution inhibiting the n = 2 phase but also greatly improves the electrical property of the quasi-2D perovskite film. As a result, the as-modified blue quasi-2D PeLED demonstrated an external quantum efficiency (EQE) of 17.08% and a luminance of 10142 cd m-2. This study exemplifies the synergistic effect among dual additives and offers a new effective additive strategy modulating phase distribution and building balanced carrier transport, which paves the way for the fabrication of highly efficient blue PeLEDs.

Multi-Species Surface Reconstruction for High-Efficiency Perovskite Nanocrystal Light-Emitting Diodes.

Although colloidal perovskite nanocrystal (PNC) solution has exhibited near-unity photoluminescence quantum yield (PLQY), the luminance would be severely quenched when the PNC solution is assembled into thin films due to the agglomeration and fusion of NCs caused by the exfoliation of surface ligands and non-radiative Förster resonance energy transfer (FRET) from small to large particle sizes, which seriously affected the performances of light-emitting diodes (LEDs). Here, we used Guanidine thiocyanate (GASCN) and Sodium thiocyanate (NaSCN) to achieve effective CsPbI3 PNC surface reconstruction. Due to the strong coordination ability of these small molecules with the anions and cations on the surface of the PNCs, they can provide strong surface protection against PNC fusion during centrifugal purification process and repair the surface defects of PNCs, so that the original uniform size distribution of PNCs can be maintained and FRET between close-packed PNC films is effectively suppressed, which allows the emission characteristics of the films to be preserved. As a result, highly oriented, smooth and nearly defect-free high-quality PNC thin films are obtained, with PLQY as high as 95.1 %, far exceeding that of the original film, and corresponding LEDs exhibit a maximum external quantum efficiency of 24.5 %.

Multiscale Bioresponses of Metal Nanoclusters.

Metal nanoclusters (NCs) are well-recognized novel nano-agents that hold great promise for applications in nanomedicine because of their ultrafine size, low toxicity, and high renal clearance. As foreign substances, however, an in-depth understanding of the bioresponses to metal NCs is necessary but is still far from being realized. Herein, this review is deployed to summarize the biofates of metal NCs at various biological levels, emphasizing their multiscale bioresponses at the molecular, cellular, and organismal levels. In the parts-to-whole schema, the interactions between biomolecules and metal NCs are discussed, presenting typical protein-dictated nano-bio interfaces, hierarchical structures, and in vivo trajectories. Then, the accumulation, internalization, and metabolic evolution of metal NCs in the cellular environment and as-imparted theranostic functionalization are demonstrated. The organismal metabolism and transportation processes of the metal NCs are subsequently distilled. Finally, this review ends with the conclusions and perspectives on the outstanding issues of metal NC-mediated bioresponses in the near future. This review is expected to provide inspiration for tailoring the customization of metal NC-based nano-agents to meet practical requirements in different sectors of nanomedicine.

The Role of Perineuronal Nets in the Contralateral Hemisphere in the Electroacupuncture-Mediated Rehabilitation of Poststroke Dysphagia Mice.

Acupuncture at Lianquan (CV23) acupoint has been shown to improve swallowing function in poststroke dysphagia (PSD). This improvement is supposed to be associated with the regulation of neuronal activity in the contralateral primary motor cortex (M1), while the underlying mechanism still needs to be elucidated. Perineuronal nets (PNNs) are well-known to be involved in the regulation of neuronal activity. Thus, we here aimed to detect the role of PNNs in the contralateral M1 hemisphere in the electroacupuncture (EA)-mediated effect in male mice. The results were obtained from a combination of methods, including in vitro slice electrophysiological recording, in vivo electrophysiological recording, and immunofluorescent staining in male mice. These results showed a decrease of the excitatory postsynaptic currents (sEPSCs) and no alteration of the inhibitory postsynaptic currents (sIPSCs) in the GABAergic neurons and the tonic inhibition in the excitatory neurons in the contralateral M1 after stroke induction, and EA recovered the impaired sEPSCs in the GABAergic neurons. We further found that the effect of EA-induced increase of c-Fos expression, enhancement of spike firing, potentiation of sEPSCs in the excitatory neurons, and improvement of swallowing function were all blocked by the removal of PNNs in the contralateral M1. In conclusion, the PNNs in the contralateral M1 was suggested to be participated in stroke pathogenesis and might be associated with the EA-mediated swallowing function rehabilitation of PSD in male mice. Our study provides insight into how PNNs might be involved in the mechanism of EA treatment for stroke rehabilitation.

Multiple Phase Regulation Enables Efficient and Bright Quasi-2D Perovskite Light-Emitting Diodes.

Quasi-2D perovskites, multiquantum well materials with the energy cascade structure, exhibit impressive optoelectronic properties and a wide range of applications in various optoelectronic devices. However, the insufficient exciton energy transfer caused by the excess of small-n phases that induce nonradiative recombination and the spatially random phase distribution that impedes charge transport severely inhibit the device performance of light-emitting diodes (LEDs). Here, a faster energy transfer process and efficient carrier recombination are achieved by introducing the multifunctional additive 2-(methylsulfonyl)-4-(trifluoromethyl)benzoic acid (MTA) to manipulate the crystallization process of perovskites. The introduction of MTA not only constrains the PEA and restrains the formation of small-n phases to improve the energy transfer process but also optimizes the crystal orientation to promote charge transport. As a result, highly efficient pure green quasi-2D perovskite LEDs with a peak EQE of 25.9%, a peak current efficiency of 108.1 cd A-1, and a maximum luminance of 288798 cd m-2 are achieved.

Electroacupuncture Exerts Analgesic Effects by Restoring Hyperactivity via Cannabinoid Type 1 Receptors in the Anterior Cingulate Cortex in Chronic Inflammatory Pain.

As one of the commonly used therapies for pain-related diseases in clinical practice, electroacupuncture (EA) has been proven to be effective. In chronic pain, neurons in the anterior cingulate cortex (ACC) have been reported to be hyperactive, while the mechanism by which cannabinoid type 1 receptors (CB1Rs) in the ACC are involved in EA-mediated analgesic mechanisms remains to be elucidated. In this study, we investigated the potential central mechanism of EA analgesia. A combination of techniques was used to detect the expression and function of CB1R, including quantitative real-time PCR (q-PCR), western blot (WB), immunofluorescence (IF), enzyme-linked immunosorbent assay (ELISA), and in vivo multichannel optical fibre recording, and neuronal activity was examined by in vivo two-photon imaging and in vivo electrophysiological recording. We found that the hyperactivity of pyramidal neurons in the ACC during chronic inflammatory pain is associated with impairment of the endocannabinoid system. EA at the Zusanli acupoint (ST36) can reduce the hyperactivity of pyramidal neurons and exert analgesic effects by increasing the endocannabinoid ligands anandamide (AEA), 2-arachidonoylglycerol (2-AG) and CB1R. More importantly, CB1R in the ACC is one of the necessary conditions for the EA-mediated analgesia effect, which may be related to the negative regulation of the N-methyl-D-aspartate receptor (NMDAR) by the activation of CB1R downregulating NR1 subunits of NMDAR (NR1) via histidine triad nucleotide-binding protein 1 (HINT1). Our study suggested that the endocannabinoid system in the ACC plays an important role in acupuncture analgesia and provides evidence for a central mechanism of EA-mediated analgesia.

Enrichment of anchoring sites by introducing supramolecular halogen bonds for the efficient perovskite nanocrystal LEDs.

Considering the multi-functionalization of ligands, it is crucial for ligand molecular design to reveal the landscape of anchoring sites. Here, a typical triphenylphosphine (TPP) ligand was employed to explore its effect on the surface of CsPbI3 perovskite nanocrystals (PNCs). Except for the conventionally considered P-Pb coordination, an P-I supramolecular halogen bonding was also found on the NC surface. The coexistence of the above two types of bonding significantly increased the formation energy of iodine vacancy defects and improved the photoluminescence quantum yield of PNCs up to 93%. Meanwhile, the direct interaction of P and I enhanced the stability of the Pb-I octahedra and dramatically inhibited the migration of I ions. Furthermore, the introduction of additional benzene rings (2-(Diphenylphosphino)-biphenyl (DPB)) increased the delocalized properties of the PNC surface and significantly improved the charge transport of the PNCs. As a result, the DPB passivated CsPbI3 NCs based top-emitting LEDs exhibite a peak external quantum efficiency (EQE) of 22.8%, a maximum luminance of 15, 204 cd m-2, and an extremely low-efficiency roll-off of 2.6% at the current density of 500 mA cm-2.

Highly Efficient and Flexible Perovskite Nanocrystal Light-Emitting Diodes on Disposable Paper Substrates.

Perovskite nanocrystals have been widely applied in the field of light-emitting diodes (LEDs) due to their excellent optoelectronic properties. However, there is generally a serious degradation of device efficiency when transferring the device from rigid to flexible substrates due to the high roughness, poor wettability, and low endurance temperature of flexible substrates. Herein, a highly flexible perovskite light-emitting diode (PeLED) by utilizing label paper as substrates and poly(methyl methacrylate) (PMMA) as the modified layer was reported. Compared with the reference device based on commonly used polyethylene terephthalate (PET) substrates, the label paper/PMMA-based devices did not show the degraded device performance when transferring from rigid to flexible substrates. This is mainly because of low roughness and good wettability of PMMA-modified label paper, which significantly improve the film-forming ability of the bottom electrode and functional layer. Furthermore, the flexibility of both devices was explored by a three-point bending flexural test, indicating that the label paper-based device has better bending stability than the polyethylene terephthalate-based one due to the lower flexural modulus for label paper. As a result, the label paper-based flexible PeLEDs exhibited the highest external quantum efficiency (EQE) of 14.3% among perovskite nanocrystal-based flexible LEDs and preeminent flexibility with 29% luminance degradation after bending for 1000 cycles at a small radius of 1.5 mm. This extension of the substrate to paper will widen the opportunity of PeLEDs in extremely flexible and inexpensive applications.

Magnetic Field-Assisted Interface Embedding Strategy to Construct 2D/3D Composite Structure for Stable Perovskite Solar Cells with Efficiency Over 24.

Perovskite solar cells (PSCs) based on 2D/3D composite structure have shown enormous potential to combine high efficiency of 3D perovskite with high stability of 2D perovskite. However, there are still substantial non-radiative losses produced from trap states at grain boundaries or on the surface of conventional 2D/3D composite structure perovskite film, which limits device performance and stability. In this work, a multifunctional magnetic field-assisted interfacial embedding strategy is developed to construct 2D/3D composite structure. The composite structure not only improves crystallinity and passivates defects of perovskite layer, but also can efficiently promote vertical hole transport and provide lateral barrier effect. Meanwhile, the composite structure also forms a good surface and internal encapsulation of 3D perovskite to inhibit water diffusion. As a result, the multifunctional effect effectively improves open-circuit voltage and fill factor, reaching maximum values of 1.246 V and 81.36%, respectively, and finally achieves power conversion efficiency (PCE) of 24.21%. The unencapsulated devices also demonstrate highly improved long-term stability and humidity stability. Furthermore, an augmented performance of 21.23% is achieved, which is the highest PCE of flexible device based on 2D/3D composite perovskite films coupled with the best mechanical stability due to the 2D/3D alternating structure.

Intelligent interior atmosphere lamp system based on quantum dot LEDs for safe driving assistance.

A driver safety assisting system is essential to reduce the probability of traffic accidents. But most of the existing driver safety assisting systems are simple reminders that cannot improve the driver's driving status. This paper proposes a driver safety assisting system to reduce the driver's fatigue degree by the light with different wavelengths that affect people's moods. The system consists of a camera, an image processing chip, an algorithm processing chip, and an adjustment module based on quantum dot LEDs (QLEDs). Through this intelligent atmosphere lamp system, the experimental results show that blue light reduced the driver's fatigue degree when just turned on; but as time went on, the driver's fatigue degree rebounded rapidly. Meanwhile, red light prolonged the driver's awake time. Different from blue light alone, this effect can remain stable for a long time. Based on these observations, an algorith was designed to quantify the degree of fatigue and detect its rising trend. In the early stage, the red light is used to prolong the awake time and the blue light to suppress when the fatigue value increases, so as to maximize the awake driving time. The result showed that our device prolonged the awake driving time of the drivers by 1.95 times and reduced fatigue during driving: the quantitative value of fatigue degree generally decreased by about 0.2 times. In most experiments, the subjects were able to complete four hours of safe driving, which reached the maximum length of continuous driving at night allowed by China laws. In conclusion, our system changes the assisting system from a reminder to a helper, thus effectively reducing the driving risk.

Halide Double Perovskite Nanocrystals Doped with Rare-Earth Ions for Multifunctional Applications.

Most lead-free halide double perovskite materials display low photoluminescence quantum yield (PLQY) due to the indirect bandgap or forbidden transition. Doping is an effective strategy to tailor the optical properties of materials. Herein, efficient blue-emitting Sb3+ -doped Cs2 NaInCl6 nanocrystals (NCs) are selected as host, rare-earth (RE) ions (Sm3+ , Eu3+ , Tb3+ , and Dy3+ ) are incorporated into the host, and excellent PLQY of 80.1% is obtained. Femtosecond transient absorption measurement found that RE ions not only served as the activator ions but also filled the deep vacancy defects. Anti-counterfeiting, optical thermometry, and white-light-emitting diodes (WLEDs) are exhibited using these RE ions-doped halide double perovskite NCs. For the optical thermometry based on Sm3+ -doped Cs2 NaInCl6 :Sb3+ NCs, the maximum relative sensitivity is 0.753% K-1 , which is higher than those of most temperature-sensing materials. Moreover, the WLED fabricated by Sm3+ -doped Cs2 NaInCl6 :Sb3+ NCs@PMMA displays CIE color coordinates of (0.30, 0.28), a luminous efficiency of 37.5 lm W-1 , a CCT of 8035 K, and a CRI over 80, which indicate that Sm3+ -doped Cs2 NaInCl6 :Sb3+ NCs are promising single-component white-light-emitting phosphors for next-generation lighting and display technologies.

Broadband Emission Origin in Metal Halide Perovskites: Are Self-Trapped Excitons or Ions?

It has always been a goal to realize high efficiency and broadband emission in single-component materials. The appearance of metal halide perovskites makes it possible. Their soft lattice characteristics and significant electron-phonon coupling synergistically generate self-trapped excitons (STEs), contributing to a broadband emission with a large Stokes shift. Meanwhile, their structural/compositional diversity provides suitable active sites and coordination environments for doping of ns2 ions, allowing 3 Pn ( n =0,1,2) →1 S0 transitions toward broadband emission. The ns2 ions emission is phenomenologically similar to that of STE emission, hindering in-depth understanding of their emission origin, and leading to failure to meet the design requirements for practical applications. In this scenario, herein, the fundamentals and development of such two emission mechanisms are summarized to establish a clear and comprehensive understanding of the broadband emission phenomenon, which may pave the way to an ideal customization of broadband-emission metal halide perovskites.

Suppression of kernel vibrations by layer-by-layer ligand engineering boosts photoluminescence efficiency of gold nanoclusters.

The restriction of structural vibration has assumed great importance in attaining bright emission of luminescent metal nanoclusters (NCs), where tremendous efforts are devoted to manipulating the surface landscape yet remain challenges for modulation of the structural vibration of the metal kernel. Here, we report efficient suppression of kernel vibration achieving enhancement in emission intensity, by rigidifying the surface of metal NCs and propagating as-developed strains into the metal core. Specifically, a layer-by-layer triple-ligands surface engineering is deployed to allow the solution-phase Au NCs with strong metal core-dictated fluorescence, up to the high absolute quantum yields of 90.3 ± 3.5%. The as-rigidified surface imposed by synergistic supramolecular interactions greatly influences the low-frequency acoustic vibration of the metal kernel, resulting in a subtle change in vibration frequency but a reduction in amplitude of oscillation. This scenario therewith impedes the non-radiative relaxation of electron dynamics, rendering the Au NCs with strong emission. The presented study exemplifies the linkage between surface chemistry and core-state emission of metal NCs, and proposes a strategy for brighter emitting metal NCs by regulating their interior metal core-involved motion.

Viewing Aggregation-Induced Emission of Metal Nanoclusters from Design Strategies to Applications.

Aggregation-induced emission (AIE)-type metal nanoclusters (NCs) represent an innovative type of luminescent metal NCs whose aggregates exhibit superior performance over that of individuals, attracting wide attention over the past decade. Here, we give a concise overview of the progress made in this area, from design strategies to applications. The representative design strategies, including solvent-induction, cation-induction, crystallization-induction, pH-induction, ligand inheritance, surface constraint, and minerals- and MOF-confinement, are first discussed. We then present the typical practical applications of AIE-type metal NCs in the various sectors of bioimaging, biological diagnosis and therapy (e.g., antibacterial agents, cancer radiotherapy), light-emitting diodes (LEDs), detection assays, and circularly polarized luminescence (CPL). To this end, we present our viewpoints on the promises and challenges of AIE-type metal NCs, which may shed light on the design of highly luminescent metal NCs, stimulating new vitality and serving as a continuous boom for the metal NC community in the future.

Electroacupuncture improves swallowing function in a post-stroke dysphagia mouse model by activating the motor cortex inputs to the nucleus tractus solitarii through the parabrachial nuclei.

As a traditional medical therapy, stimulation at the Lianquan (CV23) acupoint, located at the depression superior to the hyoid bone, has been shown to be beneficial in dysphagia. However, little is known about the neurological mechanism by which this peripheral stimulation approach treats for dysphagia. Here, we first identified a cluster of excitatory neurons in layer 5 (L5) of the primary motor cortex (M1) that can regulate swallowing function in male mice by modulating mylohyoid activity. Moreover, we found that focal ischemia in the M1 mimicked the post-stroke dysphagia (PSD) pathology, as indicated by impaired water consumption and electromyographic responses in the mylohyoid. This dysfunction could be rescued by electroacupuncture (EA) stimulation at the CV23 acupoint (EA-CV23) in a manner dependent on the excitatory neurons in the contralateral M1 L5. Furthermore, neuronal activation in both the parabrachial nuclei (PBN) and nucleus tractus solitarii (NTS), which was modulated by the M1, was required for the ability of EA-CV23 treatment to improve swallowing function in male PSD model mice. Together, these results uncover the importance of the M1-PBN-NTS neural circuit in driving the protective effect of EA-CV23 against swallowing dysfunction and thus reveal a potential strategy for dysphagia intervention.

Engineering of Hole Transporting Interface by Incorporating the Atomic-Precision Ag6 Nanoclusters for High-Efficiency Blue Perovskite Light-Emitting Diodes.

Properties of the underlying hole transport layer (HTL) play a crucial role in determining the optoelectronic performance of perovskite light-emitting devices (PeLEDs). However, endowing the current HTL system with a deep highest occupied molecular orbital (HOMO) level concurrent with high hole mobility is still a big challenge, in particular being an open constraint toward high-efficiency blue PeLEDs. In this regard, employing the poly(9-vinylcarbazole) as a model, we perform efficient incorporation of the atomic-precision metal nanoclusters (NCs), [Ag6PL6, PL = (S)-4-phenylthiazolidine-2-thione], to achieve significant tailoring in both HOMO energy level and hole mobility. As a result, the as-modified PeLEDs exhibit an external quantum efficiency (EQE) of 14.29% at 488 nm. The presented study exemplifies the success of metal NC involved HTL engineering and offers a simple yet effective additive strategy to settle the blue PeLED HTL dilemma, which paves the way for the fabrication of highly efficient blue PeLEDs.

Wide-coverage and Efficient NIR Emission from Single-component Nanophosphors through Shaping Multiple Metal-halide Packages.

Wide-coverage near infrared (NIR) phosphor-converted LEDs possess promising potential for practical applications, but little is developed towards the efficient and wide-coverage NIR phosphors. Here, we report the single-component lanthanide (Ln3+ ) ions doped Cs2 M(In0.95 Sb0.05 )Cl6 (M=alkali metal) nanocrystals (NCs), exhibiting emission from 850 to 1650 nm with high photoluminescence quantum yield of 20.3 %, which is accomplished by shaping the multiple metal halide octahedra of double perovskite via the simple alkali metal substitution. From Judd-Ofelt theoretical calculation and spectroscopic investigations, the shaping of metal halide octahedra in Cs2 M(In1-x Sbx )Cl6 NCs can break the forbidden of f-f transition of Ln3+ , thus increasing their radiative transition rates and simultaneously boosting the energy transfer efficiency from host to Ln3+ . Finally, the wide-coverage NIR LEDs based on Sm3+ , Nd3+ , Er3+ -tridoped Cs2 K0.5 Rb0.5 (In0.95 Sb0.05 )Cl6 NCs are fabricated and employed in the multiplex gas sensing and night-vision application.

Synergistic regulation effect of magnesium and acetate ions on structural rigidity for synthesizing an efficient and robust CsPbI3 perovskite toward red light-emitting devices.

The structure of CsPbI3 nanocrystals (NCs) with excellent photoelectric properties easily collapses, which hinders their application in light-emitting diodes (LEDs). Herein, we accomplished the synthesis of efficient and stable CsPbI3 NCs by regulating structural rigidity under the synergistic effect of Mg2+ and AcO- ions. The introduced AcO- and Mg2+ ions increase surface steric hindrance and defect formation energy, which enhances the structural rigidity of the perovskite. As a result, the CsPbI3 NCs display an outstanding photoluminescence quantum yield of 95.7%, in conjunction with reduced defect state density, balanced carrier injection, and distinguished conductivity. Remarkably, the modified CsPbI3 NCs exhibit excellent stability under ambient conditions for 180 days and can even survive when the temperature reaches 150 °C. Given their enhanced structural rigidity, LEDs made from these modified CsPbI3 NCs exhibit a maximum luminance and an EQE of 3281 cd m-2 and 13.2%, respectively, which are significantly improved compared with those of unmodified CsPbI3 NC LEDs.