Ultra-High Proportion of Grain Boundaries in Zinc Metal Anode Spontaneously Inhibiting Dendrites Growth.

Aqueous Zn-ion batteries are an attractive electrochemical energy storage solution for their budget and safe properties. However, dendrites and uncontrolled side reactions in anodes detract the cycle life and energy density of the batteries.Grain boundaries in metals are generally considered as the source of the above problems but we present a diverse result. This study introduces an ultra-high proportion of grain boundaries on zinc electrodes through femtosecond laser bombardment to enhance stability of zinc metal/electrolyte interface.The ultra-high proportion of grain boundaries promotes the homogenization of zinc growth potential, to achieve uniform nucleation and growth, thereby suppressing dendrite formation. Additionally, the abundant active sites mitigate the side reactions during the electrochemical process. Consequently, the 15-µm-Fs-Zn||MnO2 pouch cell achieves an energy density of 249.4 Wh kg-1 and  operates for over 60 cycles at a depth-of-discharge of 23%. The recognition of the favorable influence exerted by UP-GBs paves a new way for other metal batteries.

Electrochemical-repaired porous graphene membranes for precise ion-ion separation.

The preparation of atom-thick porous lattice hosting Å-scale pores is attractive to achieve a large ion-ion selectivity in combination with a large ion flux. Graphene film is an ideal selective layer for this if high-precision pores can be incorporated, however, it is challenging to avoid larger non-selective pores at the tail-end of the pore size distribution which reduces ion-ion selectivity. Herein, we develop a strategy to overcome this challenge using an electrochemical repair strategy that successfully masks larger pores in large-area graphene. 10-nm-thick electropolymerized conjugated microporous polymer (CMP) layer is successfully deposited on graphene, thanks to a strong π-π interaction in these two materials. While the CMP layer itself is not selective, it effectively masks graphene pores, leading to a large Li+/Mg2+ selectivity from zero-dimensional pores reaching 300 with a high Li+ ion permeation rate surpassing the performance of reported materials for ion-ion separation. Overall, this scalable repair strategy enables the fabrication of monolayer graphene membranes with customizable pore sizes, limiting the contribution of nonselective pores, and offering graphene membranes a versatile platform for a broad spectrum of challenging separations.

Flexible free-standing Fe-CoP-NAs/CC nanoarrays for high-performance full lithium-ion batteries.

In this study, a flexible, free-standing Fe-doped CoP nanoarrays electrode for superior lithium-ion storage has been successfully fabricated. The electrode combines the advantages of a Fe-doping and a flexible carbon cloth (CC) support, resulting in a high specific capacity (1356 mAh/g at 0.2 A/g) and excellent cycling stability (1138 mAh/g after 100 cycles). The cyclic voltammetry (CV) curves at different scan rates investigate the outstanding lithium storage behavior of Fe-CoP-NAs/CC which indicates a combined influence of diffusion behavior and capacitance behavior on the electrochemical process. The galvanostatic intermittent titration technique (GITT) analyzes the diffusion kinetics of Li+ which indicates the fast diffusion kinetics in the Fe-CoP/NAs/CC anode. The assembled Fe-CoP-NAs/CC//LiFePO4 battery exhibits a remarkable capacity of 325.2 mAh/g even at 5 A/g. And the battery also has good cycle stability, and still provides 498.1 mAh/g specific capacity after 200 cycles. Moreover, the Fe-CoP-NAs/CC//LiFePO4 soft-pack battery can continuously power the LEDs when it is bent at various angles which demonstrates its potential for use in wearable devices.

Tuning Pore Size in Graphene in the Angstrom Regime for Highly Selective Ion-Ion Separation.

Zero-dimensional pores spanning only a few angstroms in size in two-dimensional materials such as graphene are some of the most promising systems for designing ion-ion selective membranes. However, the key challenge in the field is that so far a crack-free macroscopic graphene membrane for ion-ion separation has not been realized. Further, methods to tune the pores in the Å-regime to achieve a large ion-ion selectivity from the graphene pore have not been realized. Herein, we report an Å-scale pore size tuning tool for single layer graphene, which incorporates a high density of ion-ion selective pores between 3.5 and 8.5 Å while minimizing the nonselective pores above 10 Å. These pores impose a strong confinement for ions, which results in extremely high selectivity from centimeter-scale porous graphene between monovalent and bivalent ions and near complete blockage of ions with the hydration diameter, DH, greater than 9.0 Å. The ion diffusion study reveals the presence of an energy barrier corresponding to partial dehydration of ions with the barrier increasing with DH. We observe a reversal of K+/Li+ selectivity at elevated temperature and attribute this to the relative size of the dehydrated ions. These results underscore the promise of porous two-dimensional materials for solute-solute separation when Å-scale pores can be incorporated in a precise manner.

Advancing Molecular Sieving via Å-Scale Pore Tuning in Bottom-Up Graphene Synthesis.

Porous graphene films are attractive as a gas separation membrane given that the selective layer can be just one atom thick, allowing high-flux separation. A favorable aspect of porous graphene is that the pore size, essentially gaps created by lattice defects, can be tuned. While this has been demonstrated for postsynthetic, top-down pore etching in graphene, it does not exist in the more scalable, bottom-up synthesis of porous graphene. Inspired by the mechanism of precipitation-based synthesis of porous graphene over catalytic nickel foil, we herein conceive an extremely simple way to tune the pore size. This is implemented by increasing the cooling rate by over 100-fold from -1 °C min-1 to over -5 °C s-1. Rapid cooling restricts carbon diffusion, resulting in a higher availability of dissolved carbon for precipitation, as evidenced by quantitative carbon-diffusion simulation, measurement of carbon concentration as a function of nickel depth, and imaging of the graphene nanostructure. The resulting enhanced grain (inter)growth reduces the effective pore size which leads to an increase of the H2/CH4 separation factor from 6.2 up to 53.3.

Natural compounds target programmed cell death (PCD) signaling mechanism to treat ulcerative colitis: a review.

Ulcerative colitis (UC) is a nonspecific inflammatory bowel disease characterized by abdominal pain, bloody diarrhea, weight loss, and colon shortening. However, UC is difficult to cure due to its high drug resistance rate and easy recurrence. Moreover, long-term inflammation and increased disease severity can lead to the development of colon cancer in some patients. Programmed cell death (PCD) is a gene-regulated cell death process that includes apoptosis, autophagy, necroptosis, ferroptosis, and pyroptosis. PCD plays a crucial role in maintaining body homeostasis and the development of organs and tissues. Abnormal PCD signaling is observed in the pathological process of UC, such as activating the apoptosis signaling pathway to promote the progression of UC. Targeting PCD may be a therapeutic strategy, and natural compounds have shown great potential in modulating key targets of PCD to treat UC. For instance, baicalin can regulate cell apoptosis to alleviate inflammatory infiltration and pathological damage. This review focuses on the specific expression of PCD and its interaction with multiple signaling pathways, such as NF-κB, Nrf2, MAPK, JAK/STAT, PI3K/AKT, NLRP3, GPX4, Bcl-2, etc., to elucidate the role of natural compounds in targeting PCD for the treatment of UC. This review used (ulcerative colitis) (programmed cell death) and (natural products) as keywords to search the related studies in PubMed and the Web of Science, and CNKI database of the past 10 years. This work retrieved 72 studies (65 from the past 5 years and 7 from the past 10 years), which aims to provide new treatment strategies for UC patients and serves as a foundation for the development of new drugs.

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes.

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an organic-inorganic coating layer (Nafion-TiO2) was introduced to protect the Zn anode and electrolyte interface. Briefly, Nafion effectively shields against the corrosion from water molecules through the hydrophobic wall of -CF3 and guided zinc deposition from the -SO3 functional group, while TiO2 particles with a higher Young's modulus (151 GPa vs 120 GPa from Zn metal) suppress the zinc dendrite formation. As a result, with the protection of Nafion-TiO2, the symmetrical Zn∥Zn battery shows an improved cycle life of 1,750 h at 0.5 mA cm-2, and the full cell based on Zn∥MnO2 shows a long cycle life over 1,500 cycles at 1 A g-1. Our research offers a novel approach for protecting zinc metal anodes, potentially applicable to other metal anodes such as those in lithium and sodium batteries.

The association between chronotype profile and temporomandibular disorders among college students.

BACKGROUND: Temporomandibular joint disorders (TMDs) are common in young adults, and the link between chronotype profile and TMDs is unclear. OBJECTIVE: This study examined TMD prevalence and chronotype distribution and explored the relationship between chronotype and TMDs in young adults. MATERIALS AND METHODS: A total of 663 students from Sichuan University completed questionnaires. Chronotype profiles were assessed using the Morningness-Eveningness Questionnaire, and TMDs were screened using the Fonseca Memory Index. To validate the findings, 68 TMD patients and 136 controls were enrolled. RESULTS: The prevalence of TMDs was 69.7%, with significant differences among chronotype profiles. The intermediate profile was the most common chronotype. Eveningness profile was associated with higher TMDs prevalence and severity. Muscle pain and side movement difficulty scores were higher in eveningness and intermediate profiles. Female gender (OR 2.345; 95% CI 1.668-3.297) was a TMD risk factor, while morningness profile (OR 0.537; 95% CI 0.297-0.970) was protective. Validation with TMD patients and controls supported these findings, showing higher eveningness profile prevalence in the TMD groups. CONCLUSIONS: TMDs have a high prevalence in college students, chronotype profiles shown to be associated with TMDs. Morningness is the protection factor in TMDs and PT, eveningness is a risk factor for IT.

Electrochemical Hydrophobic Tri-layer Interface Rendered Mechanically Graded Solid Electrolyte Interface for Stable Zinc Metal Anode.

The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic liquid electrolyte creates the hydrophobic tri-layer interface assembled by first two layers of hydrophobic OTF- and EMIM+ and third layer of loosely attached water, beyond the classical Gouy-Chapman-Stern theory based electrochemical double layer. By taking advantage of the hydrophobic tri-layer interface, the lean-water ionic liquid electrolyte enables a wide electrochemical working window (2.93 V) with relatively high zinc ion conductivity (17.3 mS/cm). Furthermore, the anion crowding interface facilitates the OTF- decomposition chemistry to create the mechanically graded solid electrolyte interface layer to simultaneously suppress the dendrite formation and maintain the mechanical stability. In this way, the lean-water based ionic liquid electrolyte realizes the ultralong cyclability of over 10000 cycles at 20 A/g and at practical condition of N/P ratio of 1.5, the cumulated areal capacity reach 1.8 Ah/cm2 , which outperforms the state-of-the-art zinc metal battery performance. Our work highlights the importance of the stable electrode/electrolyte interface stability, which would be practical for building high energy grid scale zinc-ion battery.

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency.

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized Sn clusters and their host pores in carbon nanofiber) during sodiation and desodiation is revealed using a state-of-the-art 3D electron microscopic reconstruction technique. For the first time, the anomalous expansion of Sn clusters after desodiation is observed owing to the aggregation of clusters/single atoms. Pore connectivity is retained despite the anomalous expansion, suggesting inhibition of solid electrolyte interface formation in the sub-2-nm pores. Taking advantage of the built-in nanoconfinement feature, the CNF film with nanometer-sized interconnected pores hosting Sn clusters (≈2 nm) enables high utilization (95% at a high rate of 1 A g-1) of Sn active sites while maintaining an improved initial Coulombic efficiency of 87%. The findings provide insights into electrochemical reactions in a confined space and a guiding principle in electrode design for battery applications.

Comparison of four clinical sample types for detection and investigation of PCV3 prevalence in the pig farrowing room.

Porcine circovirus type 3 (PCV3) is a newly described circovirus that has been identified in pig populations across the globe. The virus is associated with multiple diseases including reproductive and systemic diseases. As effective vaccines are lacking, surveillance is crucial for PCV3 control, but there are currently, few side-by-side comparisons of the efficacy of different samples for the detection of PCV3. This study collected four sample types, including colostrum, udder skin wipes, placental umbilical cord blood, and processing fluid from 134 litters in a sow farm from July to September 2021 for PCV3 detection based on quantitative PCR tests. Udder skin wipes showed the highest detection rates (76.9%), while 71.6% of the processing fluid, 49.3% of the placental umbilical cord, and 29.1% of the colostrum samples were positive. Logistic regression analysis suggested that the detection rates of udder skin wipes and processing fluid were similar (odds ratio for processing fluid vs udder skin wipes was 0.76, 95% confidence interval (CI) 0.43-1.32), but the two tests were probably not identifying the same population as infected, as the agreement between the samples was only moderate (Gwet's AC1: 0.65). In this study, we were able to demonstrate that PCV3 was present in the farrowing room throughout the period from birth to weaning using udder skin wipes, although viral load decreased over time. The odds of PCV3 detection in colostrum from 2-parity sows was three times higher (95% CI 1.4-6.8) than that of primiparous sows, while the odds of PCV3 detection in sows with mummified fetuses was 2.7 times higher (95% CI 1.1-6.6) than sows with no mummified fetuses. In conclusion, these results indicate that udder skin wipes have high detection rates in infected animals over the whole period from birth to weaning and would thus be suitable samples for PCV3 surveillance in the farrowing rooms.

Effects of oxidative stress regulation in inflammation-associated gastric cancer progression treated using traditional Chinese medicines: A review.

Gastric cancer (GC) is a global public health concern that poses a serious threat to human health owing to its high morbidity and mortality rates. Due to the lack of specificity of symptoms, patients with GC tend to be diagnosed at an advanced stage with poor prognosis. Therefore, the development of new treatment methods is particularly urgent. Chronic atrophic gastritis (CAG), a precancerous GC lesion, plays a key role in its occurrence and development. Oxidative stress has been identified as an important factor driving the development and progression of the pathological processes of CAG and GC. Therefore, regulating oxidative stress pathways can not only intervene in CAG development but also prevent the occurrence and metastasis of GC and improve the prognosis of GC patients. In this study, PubMed, CNKI, and Web of Science were used to search for a large number of relevant studies. The review results suggested that the active ingredients of traditional Chinese medicine (TCM) and TCM prescriptions could target and improve inflammation, pathological status, metastasis, and invasion of tumor cells, providing a potential new supplement for the treatment of CAG and GC.

Pure Amorphous and Ultrathin Phosphate Layer with Superior Ionic Conduction for Zinc Anode Protection.

Fast and uniform ion transport within the solid electrolyte interphase (SEI) is considered a crucial factor for ensuring the long-term stability of metal electrodes. In this study, we present the fabrication of ultrathin artificial interphases consisting of a zinc phosphate nanofilm with pure amorphous characteristics and a surfactant overlayer. The thickness of the interphases can be precisely controlled within the range of a few tens of nanometers. We explore the impact of artificial SEI structure, including thickness and crystallinity, on its protective capabilities. The pure amorphous phosphate layer with optimized nanoscale thickness is found to provide an abundance of short and isotropic ion migration pathways and a low diffusion energy barrier. These features facilitate rapid and homogeneous Zn2+ transportation, resulting in compact and planar zinc deposition. Meanwhile, the hydrophobic alkyl moieties of the overlayer prevent disassociation of water at the interface. As a result, this nanofilm endures ultralong cycling stability with a low overpotential and enables high Zn plating/stripping reversibility. The Zn||MnO2 full cell shows a stable cycle life for 700 cycles under practical conditions of lean electrolyte, high areal capacity cathode, and limited Zn excess. These findings provide insights into the design and optimization of SEI layers for protection of metal anodes.

Revolutionizing Lithium Storage Capabilities in TiO2 by Expanding the Redox Range.

TiO2 is a widely recognized intercalation anode material for lithium-ion batteries (LIBs), yet its practical capacity is kinetically constrained due to sluggish lithium-ion diffusion, leading to a lithiation number of less than 1.0 Li+ (336 mAh g-1). Here, the growth of TiO2 crystallites is restrained by integrating Si into the TiO2 framework, thereby enhancing the charge transfer and creating additional active sites potentially residing at grain boundaries for Li+ storage. This strategy is corroborated by the expanded redox range of Ti, as thoroughly demonstrated via synchrotron radiation-based X-ray spectroscopy and Cs-corrected electron microscopy. Consequently, when deployed for lithium storage, the tailored material achieves an extraordinarily high reversible capacity of 559 mAh g-1, 116% of the theoretical maximum of 483 mAh g-1 calculated based on all active species, while simultaneously retaining superior rate capability and robust cycling stability. This work offers fresh perspectives on the revitalization of traditional electrode materials to achieve enhanced capacities.

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries.

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules from the electrode/electrolyte interface and assist in forming a fluoride-rich, organic-inorganic gradient solid electrolyte interface (SEI) layer. The simultaneous sacrificial process of methanol and Zn(CF3SO3)2 results in the gradient SEI layer with an organic-rich surface (CH2OC- and C5 product) and an inorganic-rich (ZnF2) bottom, which combines the merits of fast ion diffusion and high flexibility. As a result, the methanol additive enables corrosion-free zinc stripping/plating on copper foils for 300 cycles with an average coulombic efficiency of 99.5%, a record high cumulative plating capacity of 10 A h/cm2 at 40 mA/cm2 in Zn/Zn symmetrical batteries. More importantly, at an ultralow N/P ratio of 2, the practical VO2//20 µm thick Zn plate full batteries with a high areal capacity of 4.7 mAh/cm2 stably operate for over 250 cycles, establishing their promising application for grid-scale energy storage devices. Furthermore, directly utilizing the 20 µm thick Zn for the commercial-level areal capacity (4.7 mAh/cm2) full zinc battery in our work would simplify the manufacturing process and boost the development of the commercial zinc battery for stationary storage.

Band engineering enhances the electrochemical properties by constructing TiO2 NRs-MoS2 NSFs flexible electrode.

Research and development of flexible electrodes with high performance are crucial to largely determine the performance of flexible lithium-ion batteries (FLIBs) to a large extent. In this work, a flexible anode (TiO2 NRs-MoS2 NSFs/CC) is rationally designed and successfully constructed, in which TiO2 nanorods arrays (NRs) vertically grown on CC as a supporting backbone for MoS2 nanosheets flowers (NSFs) to form a TiO2 NRs-MoS2 NSFs heterostructure. The backbone can not only serve as a mechanical support MoS2 and improve its electronic conductivity, but also limit the dissolution of polysulfides issue during cycling. The density functional theory (DFT) analysis manifests that the obvious interaction between O and S at the interface for the TiO2 NRs-MoS2 NSFs heterostructure changes the electronic structure and reduces the band gap of TiO2 NRs-MoS2 NSFs. The small band gap and high electron state at the Fermi level are both beneficial to the transport of electrons, enhancing the kinetics, and giving the long cycling stability at high density and excellent rate capacity. Furthermore, the assembled TiO2 NRs-MoS2 NSFs/CC//NCM622 full cell delivers superior rate capacity and good cycling stability. Meanwhile, the soft-packed cell shows good mechanical flexibility, which can be lighted up successfully and keep brightness when folding with different angles. This result illustrates that it is a highly potential strategy for constructing flexible electrodes with the controlled electronic structure through band engineering to not only improve the electrochemical performance, but also possibly meet the requirements of high-performance FLIBs.

Fast and Durable Lithium Storage Enabled by Tuning Entropy in Wadsley-Roth Phase Titanium Niobium Oxides.

Wadsley-Roth phase titanium niobium oxides have received considerable interest as anodes for lithium ion batteries. However, the volume expansion and sluggish ion/electron transport kinetics retard its application in grid scale. Here, fast and durable lithium storage in entropy-stabilized Fe0.4 Ti1.6 Nb10 O28.8 (FTNO) is enabled by tuning entropy via Fe substitution. By increasing the entropy, a reduction of the calcination temperature to form a phase pure material is achieved, leading to a reduced grain size and, therefore, a shortening of Li+ pathway along the diffusion channels. Furthermore, in situ X-ray diffraction reveals that the increased entropy leads to the decreased expansion along a-axis, which stabilizes the lithium intercalation channel. Density functional theory modeling indicates the origin to be the more stable FeO bond as compared to TiO bond. As a result, the rate performance is significantly enhanced exhibiting a reversible capacity of 73.7 mAh g-1 at 50 C for FTNO as compared to 37.9 mAh g-1 for its TNO counterpart. Besides, durable cycling is achieved by FTNO, which delivers a discharge capacity of 130.0 mAh g-1 after 6000 cycles at 10 C. Finally, the potential impact for practical application of FTNO anodes has been demonstrated by successfully constructing fast charging and stable LiFePO4 ‖FTNO full cells.

Effects of tree sex, maturity, local abiotic, and biotic neighborhoods on the growth of a subtropical dioecious tree species Diospyros morrisiana.

PREMISE: Understanding the drivers of the growth in long-lived woody trees is the key to predicting their responses to and maintaining their populations under global change. However, the role of tree sex and differential investment to reproduction are often not considered in models of individual tree growth, despite many gymnosperm and angiosperm species having separate male and female sexes. Thus, better models of tree growth should include tree sex and life stage along with the abiotic and biotic neighborhoods. METHODS: We used a sex-specific molecular marker to determine the sex of 2188 individual trees >1 cm DBH of the dioecious tree species Diospyros morrisiana in a 50-ha subtropical forest plot in China. We used long-term census data from about 300,000 trees, together with 625 soil samples and 2352 hemispherical photographs to characterize the spatially explicit biotic and abiotic neighborhoods. RESULTS: We found a male-biased effective sex ratio and a female-biased overall population sex ratio of D. morrisiana. No sex spatial segregation was detected for the overall population, mature, or immature trees. Immature trees grew faster than mature trees and females grew slower than males. Further, conspecific neighbors significantly decreased tree growth, while the abiotic neighborhood showed no significant effect. CONCLUSIONS: Our findings suggest that variation in resource allocation patterns within and across individual trees of different sexes and life-history stages should be more widely accounted for in models of tree growth. In addition, our study highlights the importance of sex-specific molecular markers for studying populations of long-lived dioecious tree species.

Mixed-phase 1T/2H-WS2 nanosheets on N-doped multichannel carbon nanofiber as current collector-integrated electrode for potassium battery anode.

Potassium-ion batteries (PIBs) have attracted enormous attention due to the increasing lithium battery cost, but their development is still in the pre-mature stage due to the limited selection of electrodes. Herein, a free-standing current-collector-integrated electrode, composed of mixed-phase WS2 nanosheets with nitrogen-doped multichannel carbon nanofibers (N-MCNFs) membrane, is reported for high-performance potassium ion batteries anode. Benefiting the unique multichannel carbon nanostructure as a current collector-integrated electrode as well as mixed-phase lamellar structure WS2 for enhanced potassium ion entry, the 1T/2H-WS2/N-MCNFs hybrid current-collector-free anode delivers an outstanding areal capacity of 2.88 mAh cm-2 (corresponding to 411 mAh/g based on the mass of both electrode and current collector) at a current of 0.7 mA cm-2 as well as long-term cycling stability for over 1000 cycles at a high current of 14 mA cm-2, surpassing the current state-of-art PIB anode. It is believed that our findings based on the high energy current collector integrated electrode at high mass loading would boost future research on practical metal ion batteries.

Two-Dimensional Organic-Inorganic Heterostructure as a Multifunctional Protective Layer for High Performance Zinc Metal Anode.

Dendrite growth and side reactions of Zn metal anodes remain unresolved obstacles for practical application of aqueous Zn ion batteries. Herein, a two-dimensional (2D) organic-inorganic heterostructure with controlled thickness was constructed as a protective layer for a Zn metal anode. The reduction of uniformly distributed polyoxometalate in the layer causes a negative charge density gradient, which can accelerate zinc ion transfer, homogenize zinc deposition, and shield sulfates at the electrode interface, while the exposed hydrophobic alkyl chain of the layer can isolate the direct contact of water with the Zn anode. As a result of the synergetic effect, this 2D organic-inorganic heterostructure enables high Zn plating/stripping reversibility, with high average Coulombic efficiencies of 99.97% for 3700 cycles at 2 mA cm-2. Under high Zn utilization conditions, a high areal-capacity full cell with hundreds of cycles was demonstrated.