Desalting strategies for native mass spectrometry.

In native mass spectrometry (MS) salts are indispensable for preserving the native structures of biomolecules, but detrimental to mass sensitivity, resolution, and accuracy. Such a conflict makes desalting in native MS more challenging, distinctive, and sample-dependent than in peptide-centric MS. This review first briefly introduces the charged residue mechanism whereby native-like gaseous protein ions are released from electrospray droplets, revealing a higher degree of salt adduction than denatured proteins. Subsequently, this review summarizes and explores the existing strategies, underlying mechanisms and future perspectives of desalting in native MS. These strategies mainly focus on buffer exchange into volatile salts (offline and online approaches), addition of solution additives (e.g., anion, supercharging reagent, solution phase chelator and amino acid), use of submicron electrospray emitters (down to 60 nm), and other potential approaches (e.g., induced and electrophoretic nanoelectrospray ionization). The strategies of online buffer exchange and using nanoscale electrospray emitters are highlighted. This review would not only be a valuable addition to the field of sample preparation in MS, but would also serve as a beginner's guide to desalting in native MS.

Equivalent Circuit of a Stacked Piezoelectric Cymbal Vibrator.

In order to provide a convenient and fast calculation method, the equivalent circuit of a novel stacked piezoelectric cymbal vibrator is studied. The equivalent circuit model of the piezoelectric stack is derived by combining the equivalent circuit models of the thin piezoelectric disk and electrode. The equivalent circuit of the cymbal structure is then derived. The equivalent circuit model of the stacked piezoelectric cymbal vibrator is further proposed. The output axial displacements and output forces of the cymbal vibrator under different excitation voltages are investigated using the equivalent circuit model. The effectiveness of the equivalent circuit has been verified by comparing it with the finite element method. Furthermore, the equivalent circuit method has a much faster calculation speed than the finite element method.

Influences of superfine-grinding and mix enzymolysis alone or combined with hydroxypropylation or acetylation on the hypolipidemic and hypoglycemic properties of coconut endosperm residue fiber.

Coconut endosperm residue is an abundant and low-cost resource of dietary fiber, but the low soluble fiber content limits its functional properties and applications in the food industry. To improve the hypolipidemic and hypoglycemic properties, coconut endosperm residue fiber (CERF) was modified by superfine-grinding and mix enzymatic hydrolysis alone, or combined with acetylation or hydroxypropylation. The effects of these modifications on the structure and functional properties were studied using scanning electron microscopy, Fourier-transformed infrared spectroscopy, and in vitro tests. After these modifications, the microstructure of CERF became more porous, and its soluble fiber content, surface area, water adsorption, and expansion capacities were all improved (p < 0.05). Moreover, superfine-grinding and mix enzymolysis combined with acetylation treated CERF showed the highest surface hydrophobicity (48.96) and cholesterol and cholate adsorption abilities (33.72 and 42.04 mg∙g‒1). Superfine-grinding-, mix enzymolysis-, and hydroxypropylation-treated CERF exhibited the highest viscosity (17.84 cP), glucose adsorption capacity (29.61 µmol∙g‒1), and glucose diffusion inhibition activity (73.96%), and water-expansion ability (8.60 mL∙g‒1). Additionally, superfine-grinding and mix enzymatic hydrolyzed CERF had the highest α-amylase inhibiting activity (42.76%). Therefore, superfine-grinding and mix enzymolysis alone or combined with hydroxypropylation were better choices to improve hypoglycemic properties of CERF; meanwhile, superfine-grinding and mix enzymolysis combined with acetylation can effectively improve its hypolipidemic properties. PRACTICAL APPLICATION: This study offered three composite modification methods to improve the soluble fiber content and in vitro hypolipidemic and hypoglycemic properties of coconut endosperm residue fiber. These modification methods were practicable and low-cost. Moreover, it provides good choices to improve the functional properties and applications of other dietary fibers in the food industry.

Millet Bran Dietary Fibers Modified by Heating and Enzymolysis Combined with Carboxymethylation, Acetylation, or Crosslinking: Influences on Properties of Heat-Induced Egg White Protein Gel.

Applications of millet bran dietary fiber (MBDF) in the food industry are limited by its poor hydration properties. Herein, MBDF was modified by heating, xylanase and cellulase treatment separately combined with carboxymethylation, acetylation, and phosphate crosslinking, and the effects of the modified MBDFs on heat-induced egg white protein gel (H-EWG) were studied. The results showed that three composite modifications, especially heating and dual enzymolysis combined with carboxymethylation, increased the surface area, soluble fiber content, and hydration properties of MBDF (p < 0.05). MBDF and the modified MBDFs all made the microstructure of H-EWG denser and decreased its α-helix content. Three composite modifications, especially heating and dual enzymolysis combined with carboxymethylation, enhanced the improving effect of MBDF on the WRA (from 24.89 to 35.53 g/g), pH, hardness (from 139.93 to 323.20 g), chewiness, and gumminess of H-EWPG, and enhanced the gastric stability at 3-5 g/100 g. MBDFs modified with heating and dual enzymolysis combined with acetylation or crosslinking were more effective in increasing the antioxidant activity of the gastrointestinal hydrolysates of H-EWG than MBDF (p < 0.05). Overall, heating, xylanase and cellulase treatment separately combined with carboxymethylation, acetylation and crosslinking can enhance the hydration properties and the improving effect of millet bran fibers on H-EWG properties.

Development and application of a CNT-Ag-Cu-Al/PS-based paper electrode for detecting diverse analytes in complex matrices.

Electrochemical sensors play a crucial role in the detection of different analytes in complex matrices, and their performance is highly dependent on the electrode capacity. However, most of the available electrodes can only be used for single-component detection, so it is urgent to develop electrodes with high sensitivity and selectivity for different components. Herein, we report an amphiprotic amino-bonded carbon nanotube-Ag/Cu/Al nanoparticle/polystyrene-coated paper electrode (CNT-Ag-Cu-Al/PS electrode), which can be used for the measurement of glucose (Glc), oxytetracycline (OTC), and hydroquinone (HQ), respectively. The results showed that the analytical sensitivity and selectivity of the CNT-Ag-Cu-Al/PS electrode were comparable to those of single metal-coated paper substrate. The developed electrode also exhibited excellent linear responses for Glc, OTC, and HQ in the ranges of 1.0-1000.0 µM, 1.0 × 10-2 to 10.0 µM, and 5.0 × 10-3 to 50.0 µM, and the limits of detection (LODs) were 0.2055 µM (Glc), 0.0074 µM (OTC), and 0.0048 µM (HQ). Owing to the characteristics of good selectivity, anti-interference, stability, and reproducibility, the CNT-Ag-Cu-Al/PS paper electrode has been successfully applied to the detection of these analytes in complex human body fluids, food, and environmental waters. The paper electrode is promising for the detection of target compounds in complex matrices.

Paper-in-Tip Bipolar Electrospray Mass Spectrometry for Real-Time Chemical Reaction Monitoring.

Capturing short-lived intermediates at the molecular level is key to understanding the mechanism and dynamics of chemical reactions. Here, we have developed a paper-in-tip bipolar electrolytic electrospray mass spectrometry platform, in which a piece of triangular conductive paper incorporated into a plastic pipette tip serves not only as an electrospray emitter but also as a bipolar electrode (BPE), thus triggering both electrospray and electrolysis simultaneously upon application of a high voltage. The bipolar electrolysis induces a pair of redox reactions on both sides of BPE, enabling both electro-oxidation and electro-reduction processes regardless of the positive or negative ion mode, thus facilitating access to complementary structural information for mechanism elucidation. Our method enables real-time monitoring of transient intermediates (such as N,N-dimethylaniline radical cation, dopamine o-quinone (DAQ) and sulfenic acid with half-lives ranging from microseconds to minutes) and transient processes (such as DAQ cyclization with a rate constant of 0.15 s-1). This platform also provides key insights into electrocatalytic reactions such as Fe (III)-catalyzed dopamine oxidation to quinone species at physiological pH for neuromelanin formation.

Influences of superfine-grinding and enzymolysis separately assisted with carboxymethylation and acetylation on the in vitro hypoglycemic and antioxidant activities of oil palm kernel expeller fibre.

The synergistic effects of ultrafine grinding and enzymolysis (cellulase and Laccase hydrolysis) alone or combined with carboxymethylation or acetylation on the hypoglycemic and antioxidant activities of oil palm kernel fibre (OPKEF) were studied for the first time. After these synergistic modifications, the microstructure of OPKEF became more porous, and its soluble fibre and total polyphenols contents, and surface area were all improved (P < 0.05). Superfine-grinding and enzymolysis combined with carboxymethylation treated OPKEF exhibited the highest viscosity (13.9 mPa∙s), inhibition ability to glucose diffusion (38.18%), and water-expansion volume (3.58 mL∙g-1). OPKEF treated with superfine-grinding and enzymolysis combined with acetylation showed the highest surface hydrophobicity (50.93) and glucose adsorption capacity (4.53 µmol∙g-1), but a lower α-amylase-inhibition ability. Moreover, OPKEF modified by superfine-grinding and enzymolysis had the highest inhibiting activity against α-amylase (25.78%). Additionally, superfine-grinding and enzymolysis combined with carboxymethylation or acetylation both improved the content and antioxidant activity of OPEKF's bounding polyphenols (P < 0.05).

Surface charge-induced electrospray for high-throughput analysis of complex samples and electrochemical reaction intermediates using mass spectrometry.

Electrospray-related ion sources are promising for direct mass spectrometric analysis of complex samples, but current protocols suffer from complicated components and low analytical sensitivity. Here, we propose a surface charge-induced electrospray ionization (SCIESI) inspired by flashover on an insulator surface under high voltage. This protocol not only effectively avoids contact between the sample solution and metal electrode, but also allows completion of the entire analytical process in less than 40 seconds and limits of detection in the pictogram per milliliter range. SCIESI coupled to mass spectrometry can also be used to monitor electro-chemical processes, and a number of oxidation and reduction reactions have been studied, demonstrating that it is a powerful tool for understanding electrochemical reaction mechanisms.

Influence of ZnO morphology on the capability of portable paper-based electrospray ionization mass spectrometry to determine therapeutic drugs in complex matrices.

Adsorbents play a significant role in enhancing the analytical sensitivity of target analytes in complex samples by mitigating matrix effects. In our recent report, ZnO stood out among various adsorbents to determine target therapeutic drugs in complex biological matrices when applied for portable paper-based electrospray ionization mass spectrometry (PPESI-MS). However, the influence of the morphology of ZnO on the performance of PPESI-MS is elusive. Herein, different morphologies of ZnO particles were prepared via co-precipitation or ultrasonic methods, and their capability to determine different therapeutic drugs in serum were systemically investigated. The results demonstrated that flower-shaped ZnO gave a superior capacity, and its analysis sensitivity was 2.9-12.8-fold higher than those achieved with other ZnO morphologies. Further characterization revealed that the unique performance of flower-shaped ZnO was closely associated with its favorable desorption behavior to drugs, small spray plume, and few spray emitters at the tip of coated paper substrate. To illustrate the potential of flower-shaped ZnO, its coated paper was used as a substrate for the determination of various drugs in complex matrices such as serum, and a limit of detection as low as 2 pg mL-1 was achieved. The corresponding recoveries ranged from 93.2% to 107.2%. The developed protocol is promising in high-sensitivity analysis of target drugs in complex sample matrices.

Dual Enzymolysis Assisted by Acrylate or Phosphate Grafting: Influences on the Structural and Functional Properties of Jujube Residue Dietary Fiber.

Jujube residue is an abundant and low-cost dietary fiber resource, but its relatively lower hydration and functional properties limit its utilization as an ingredient of functional food. Thus, cellulase and hemicellulase hydrolysis, enzymatic hydrolysis assisted by phosphate grafting (EPG), and enzymatic hydrolysis assisted by acrylate grafting (EAG) were used to improve the functional properties of jujube residue dietary fiber (JRDF) in this study. The results evidenced that these modifications all increased the porosity of the microstructure of JRDF and increased the soluble fiber content, surface area, and hydration properties, but reduced its brightness (p < 0.05). Moreover, JRDF modified by enzymolysis combined with acrylate grafting offered the highest extractable polyphenol content, oil, sodium cholate, and nitrite ion sorption abilities. Meanwhile, JRDF modified via enzymolysis assisted by phosphate grafting showed the highest soluble fiber content (23.53 g∙100 g-1), water-retention ability (12.84 g∙g-1), viscosity (9.37 cP), water-swelling volume (10.80 mL∙g-1), and sorption ability of copper (II) and lead (II) ions. Alternatively, JRDF modified with cellulase hydrolysis alone exhibited the highest glucose adsorption capacity (21.9 g∙100 g-1) at pH 7.0. These results indicate that EPG is an effective way to improve the hypolipidemic effects of JRDF, while EAG is a good choice to enhance its hydration and hypoglycemic properties.

Research on Stacked Piezoelectric Cymbal Vibrator.

As demand for haptic feedback increases, piezoelectric materials have become one of the best candidate materials due to their small size, high electromechanical coupling coefficient, and fast response. A stacked piezoelectric cymbal vibrator is proposed based on the common cymbal-type transducer, which is composed of a piezoelectric stack to drive and a cymbal disk to amplify displacement. A coupling theoretical model between the piezoelectric stack and the cymbal-type structure is established. The longitudinal and radial displacements of the stacked piezoelectric cymbal vibrator are calculated in the low frequency range (<1000 Hz) by the theoretical model and the finite element method. The theoretical and numerical results are in good agreement. The results show that the radial displacement can be converted into longitudinal displacement and then effectively amplified by the cymbal disk with an amplification ratio of 30. The feature is conducive to its widespread application in the field of consumer electronics.

Oil palm kernel globulin antihypertensive peptides: isolation and characterization, ACE inhibition mechanisms, zinc-chelating activity, security and stability.

Introduction: The oil palm kernel (OPK) expeller is the main byproduct of palm oil, but its utilization is limited. Methods: To obtain angiotensin-I-converting enzyme (ACE) inhibition peptides with Zn-chelating capacity, defatted oil palm kernel globulin hydrolysates (DOPKGH) were subjected to Sephadex G-15 gel electrophoresis, reverse-phase high liquid performance chromatography, and UPLC-ESI-MS/MS analysis. Results and discussion: Five representative oligopeptides, including Gln-Arg-Leu-Asp-Arg-Cys-Lys (QRLERCK), Leu-Leu-Leu-Gly-Val-Ala-Asn-Tyr-Arg (LLLGVANYR), Arg-Ala-Asp-Val-Phe-Asn-Pro-Arg (RADVFNPR), Arg-Val-Ile-Lys-Tyr-Asn-Gly-Gly-Gly-Ser-Gly (RVIKYNGGGSG), and Glu-Val-Pro-Gln-Ala-Tyr-Ile-Pro (EVPQAYIP), without potential toxicity and allergenicity, were identified in DOPKGH. Of these, only EVPQAYIP showed both ACE-inhibitory activity (IC50: 102.75 µmol/L) and Zn-chelating capacity (11.69 mg/g). Molecular docking and inhibition kinetics showed that EVPQAYIP was a competitive inhibitor of ACE because it could bind to Glu384, Lys511, and Gln281 (belonging to the central S1 and S2 pockets, respectively) of ACE. Moreover, EVPQAYIP affects zinc tetrahedral coordination in ACE by binding to Glu411; the amino and carboxyl groups of EVPQAYIP chelate with zinc ions. During gastrointestinal digestion, the ACE inhibitory activity of EVPQAYIP was relatively stable. Additionally, EVPQAYIP enhanced zinc stability in the intestine and exerted antihypertensive effects in spontaneous hypertensive rats. These results suggest the potential application of OPK peptides as ingredients in antihypertensive agents or zinc fortification.

Study on the In Silico Screening and Characterization, Inhibition Mechanisms, Zinc-Chelate Activity, and Stability of ACE-Inhibitory Peptides Identified in Naked Oat Bran Albumin Hydrolysates.

In this study, naked oat bran albumin hydrolysates (NOBAH) were subjected to gel chromatography with Sephadex G-15, reverse phase-high liquid performance separation, and UPLC-ESI-MS/MS identification. Six safe peptides including Gly-Thr-Thr-Gly-Gly-Met-Gly-Thr (GTTGGMGT), Gln-Tyr-Val-Pro-Phe (QYVPF), Gly-Ala-Ala-Ala-Ala-Leu-Val (GAAAALV), Gly-Tyr-His-Gly-His (GYHGH), Gly-Leu-Arg-Ala-Ala-Ala-Ala-Ala-Ala-Glu-Gly-Gly (GLRAAAAAAEGG), and Pro-Ser-Ser-Pro-Pro-Ser (PSSPPS) were identified. Next, in silico screening demonstrated that QYVPF and GYHGH had both angiotensin-I-converting enzyme (ACE) inhibition activity (IC50: 243.36 and 321.94 µmol/L, respectively) and Zinc-chelating ability (14.85 and 0.32 mg/g, respectively). The inhibition kinetics demonstrated that QYVPF and GYHGH were both uncompetitive inhibitors of ACE. Molecular docking showed that QYVPF and GYHGH could bind, respectively, three and five active residues of ACE with short hydrogen bonds (but not belonging to any central pocket). QYVPF and GYHGH could bind, respectively, twenty-two and eleven residues through hydrophobic interactions. Moreover, GYHGH was able to affect zinc tetrahedral coordination in ACE by interacting with His383. The inhibition activities of QYVPF and GYHGH toward ACE were relatively resistant to gastrointestinal digestion. GYHGH improved zinc solubility in the intestines (p > 0.05) because its amino and carboxyl groups were chelating sites for zinc ions. These results suggest the potential applications of naked oat peptides for potential antihypertension or zinc fortification.

ACE-Inhibitory Peptides Identified from Quinoa Bran Glutelin-2 Hydrolysates: In Silico Screening and Characterization, Inhibition Mechanisms of ACE, Coordination with Zinc Ions, and Stability.

To obtain Angiotensin-I-Converting Enzyme (ACE) inhibition peptides with Zn-chelating capacity, quinoa bran glutelin-2 hydrolysates (QBGH) by Flavourzyme and Papain were subjected to Sephadex G-15 gel chromatography, reverse phase-high liquid performance chromatography and UPLC-ESI-MS/MS analysis. Four oligopeptides including GGGSGH, EAGAE, AGGGAGGG and AVPKPS were identified. Of these, only the hexapeptide AVPKPS had both ACE-inhibitory activity (IC50: 123.13 µmol/L) and Zn-chelating ability (17.36 mg/g). Molecular docking showed AVPKPS could bind with active residues Glu384 and Ala354 (both belong to the central S1 pocket of ACE including) through short hydrogen bond and hydrophobic interactions, respectively. Inhibition kinetics verified that AVPKPS was a competitive inhibitor of ACE. Moreover, AVPKPS can affect the zinc tetrahedral coordination in ACE through binding with residues His387 and His383. Fourier-transform infrared spectroscopy analysis demonstrated that the amino and carboxyl groups of AVPKPS were the main chelating sites for zinc ions. Under the gastrointestinal digestion, the ACE inhibition capacity of AVPKPS was relatively stable, and the zinc solubility of AVPKPS-zinc complexes was more stable than zinc sulfate (p < 0.05). These results suggest that quinoa peptides have potential applications as ingredients for antihypertension or zinc fortification.

Nickel oxide morphology synthesized with a hydrothermal method for inverted perovskite solar cells.

In this paper, a hydrothermal method is used to synthesize a nickel oxide nanostructure (nano-NiO) for its application to inverted perovskite solar cells. These pore nanostructures were employed to increase both the contact and channel between the hole transport and perovskite layers of an ITO/nano-N i O/C H 3 N H 3 P b I 3/P C B M/A g device. The purpose of this research is twofold. First, three different nano-NiO morphologies were synthesized at temperatures of 140°C, 160°C, and 180°C. Then, a Raman spectrometer was used to check the phonon vibration and magnon scattering characteristics after an annealing temperature of 500°C. Second, nano-NiO powders were dispersed in isopropanol for subsequent spin coating on the inverted solar cells. The nano-NiO morphologies were multi-layer flakes, microspheres, and particles at synthesis temperatures of 140°C, 160°C, and 180°C, respectively. When the microsphere nano-NiO was used as the hole transport layer, the perovskite layer had a larger coverage of 83.9%. The grain size of the perovskite layer was analyzed by x-ray diffraction, and strong crystal orientations of (110) and (220) peaks were found. Despite this, the power conversion efficiency could affect the promotion, which is 1.37 times higher than the poly(3,4-ethylenedioxythiophene) polystyrene sulfonate element conversion efficiency of the planar structure.

On-Demand Portable Paper-Based Electrospray Ionization Mass Spectrometry for High-Sensitivity Analysis of Complex Samples.

Paper spray ionization has been demonstrated to be the most promising substrate-based source, but this technique suffers from the low desorption efficiency of target compounds and poor portability. In the current study, we describe a portable paper-based electrospray ionization (PPESI) in which a piece of triangle paper and adsorbent are packed sequentially into a modified disposable micropipette tip. This source not only captures the feature of paper spray and adsorbent for highly efficient suppression of sample matrixes for target compound analysis but also takes advantage of a micropipette tip to prevent spray solvent from rapid evaporation. The performance of developed PPESI depends on the type and amount of packed adsorbent, paper substrate, and spray solvent and applied voltage. Moreover, by contrast to other related sources, the analytical sensitivity and the spray duration of PPESI in tandem with MS have been improved by factors of 2.8-32.3 and 2.0-13.3, respectively. Based on its high accuracy (>96%) and precision (less than 3% relative standard deviation), the PPESI coupled to a mass spectrometer has been used to determine diverse therapeutic drugs and pesticides in complex biological (e.g., whole blood, serum, and urine) and food (e.g., milk and orange juice) matrixes, and the limits of detection and quantification were 2-4 pg mL-1 and 7-13 pg mL-1, respectively. Taking the portability, high sensitivity, and repeatability, the technique may be a promising alternative for complex sample analysis.

Design and Experimental Study of a Stepping Piezoelectric Actuator with Large Stroke and High Speed.

A stepping piezoelectric actuator is proposed with large stroke and high speed. The piezoelectric actuator consists of two symmetrical stators and a mover. The actuator can operate with a "double-drive, four-clamp" mode. The proposed actuator solves the problems of short stroke, low speed, and small load inherent in the currently published stepping piezoelectric actuators. By combining Workbench software with APDL language, finite element simulation and statics and dynamics analysis are carried out to guide the design of the actuator. The new piezoelectric simulation method can solve the difficulties regarding parameter setting and loading voltage on multiple interfaces for a complex piezoelectric model. Therefore, the novel method is helpful to develop the simulation of multilayer thin piezoelectric devices. The prototype of the actuator is developed and tested. Experimental results show that the actuator can run stably in the range of 0 to 600 Hz. The driving stroke is greater than 85 mm, the resolution can reach 535 nm, the maximum driving speed is 6.11 mm/s, and the maximum load is 49 N.

Effects of three biological combined with chemical methods on the microstructure, physicochemical properties and antioxidant activity of millet bran dietary fibre.

The effects of cellulase hydrolysis separately combined with hydroxypropylation, carboxymethylation and phosphate crosslinking on the physicochemical properties and antioxidant activity of millet bran dietary fibre (MBDF) were investigated. Compared to cellulase hydrolysis alone, these dual modifications more effectively improved the soluble fibre content, water-swelling ability, viscosity, emulsifying capacity and cation-exchange capacity of MBDF but reduced the emulsion stability, brightness and polyphenol content of MBDF (P < 0.05). MBDF modified by cellulase hydrolysis combined with hydroxypropylation showed the highest emulsifying capacity (60.03 m2/g) and oil-adsorption capacity (3.32 g/g) but the lowest nitrite ion-adsorbing ability (NIAA). MBDF modified by cellulase hydrolysis with carboxymethylation showed the highest surface hydrophobicity, cation-exchange capacity (0.352 mmol/g) and NIAA (152.89 µg/g). MBDF modified by cellulase hydrolysis combined with phosphate crosslinking exhibited excellent copper ion-adsorbing ability (19.97 mg/g) and viscosity (19.33 cp). Moreover, these dual modifications all enhanced the Fe2+ chelating ability and reducing power of MBDF (P < 0.05).

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability.

Graphitic carbon nitride (g-C3N4), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C3N4 is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C3N4 are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO2 reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C3N4-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C3N4, including the fabrication, modification, and application in energy and environmental sustainability.

Millet bran protein hydrolysates derived peptides-zinc chelate: Structural characterization, security prediction in silico, zinc transport capacity and stability against different food processing conditions.

A novel peptide Ser-Asp-Asp-Val-Leu (SDDVL) of excellent zinc-chelating capacity (13.77 mg/g) was identified in millet bran protein hydrolysates. In silico prediction demonstrated that SDDVL had no potential toxicity. The results of structural characterization demonstrated that both amino group and carboxyl group of SDDVL were the primary zinc-chelating sites. Moreover, SDDVL-zinc chelate showed higher stability (p < 0.05) than ZnSO4 and zinc gluconate under different processing conditions including most pasteurization conditions, heating at 100°C for 10-50 min, various pH values (8.0-10.0), treatment of glucose (4-8 g/100 g) or NaCl (1-4 g/100 g), and simulated gastrointestinal digestion. In addition, SDDVL-zinc chelate showed higher zinc transport capacity than ZnSO4 and zinc gluconate in Caco-2 cells (p < 0.05). These results suggested that millet bran peptide had a positive effect on the gastrointestinal stability and bioavailability of Zn, and SDDVL-zinc chelate could be used as ingredient of zinc supplements. PRACTICAL APPLICATION: The current study provided a practical method to identify peptides of excellent zinc-chelating capacity from millet bran protein hydrolysates. This study demonstrated that in silico prediction assisted with suitable database was a fast, practical, and economic way to evaluate the security and to analysis the physicochemical properties of novel peptides. Moreover, it provided an efficient method to assess the stability of peptide-zinc chelate under different food processing conditions, which was the theoretical basis for utilization of peptide as ingredient of zinc fortifications.