SMS2, a Novel Allele of OsINV3, Regulates Grain Size in Rice.

Grain size has an important effect on rice yield. Although several key genes that regulate seed size have been reported in rice, their molecular mechanisms remain unclear. In this study, a rice small grain size 2 (sms2) mutant was identified, and MutMap resequencing analysis results showed that a 2 bp insertion in the second exon of the LOC_Os02g01590 gene resulted in a grain length and width lower than those of the wild-type Teqing (TQ). We found that SMS2 encoded vacuolar acid invertase, a novel allele of OsINV3, which regulates grain size. GO and KEGG enrichment analyses showed that SMS2 was involved in endoplasmic reticulum protein synthesis, cysteine and methionine metabolism, and propionic acid metabolism, thereby regulating grain size. An analysis of sugar content in young panicles showed that SMS2 reduced sucrose, fructose, and starch contents, thus regulating grain size. A haplotype analysis showed that Hap2 of SMS2 had a longer grain and was widely present in indica rice varieties. Our results provide a new theoretical basis for the molecular and physiological mechanisms by which SMS2 regulates grain size.

Genome-Wide Identification and Expression Analysis of the DA1 Gene Family in Sweet Potato and Its Two Diploid Relatives.

The DA1-like gene family plays a crucial role in regulating seed and organ size in plants. The DA1 gene family has been identified in several species but has not yet been reported in sweet potatoes. In this study, nine, eleven, and seven DA1s were identified in cultivated sweet potato (Ipomoea batatas, 2n = 6x = 90) and its two diploid wild relatives, I. trifida (2n = 2x = 30) and I. triloba (2n = 2x = 30), respectively. The DA1 genes were classified into three subgroups based on their phylogenetic relationships with Arabidopsis thaliana and Oryza sativa (rice). Their protein physiological properties, chromosomal localization, phylogenetic relationships, gene structure, promoter cis-elements, and expression patterns were systematically analyzed. The qRT-PCR results showed that the expression levels of four genes, IbDA1-1, IbDA1-3, IbDA1-6, and IbDA1-7, were higher in the sweet potato leaves than in the roots, fiber roots, and stems. In our study, we provide a comprehensive comparison and further the knowledge of DA1-like genes in sweet potatoes, and provide a theoretical basis for functional studies.

Effect of Rapid Hollow Cathode Plasma Nitriding Treatment on Corrosion Resistance and Friction Performance of AISI 304 Stainless Steel.

Low-temperature plasma nitriding of austenitic stainless steel can ensure that its corrosion resistance does not deteriorate, improving surface hardness and wear performance. Nevertheless, it requires a longer processing time. The hollow cathode discharge effect helps increase the plasma density quickly while radiatively heating the workpiece. This work is based on the hollow cathode discharge effect to perform a rapid nitriding strengthening treatment on AISI 304 stainless steels. The experiments were conducted at three different temperatures (450, 475, and 500 °C) for 1 h in an ammonia atmosphere. The samples were characterized using various techniques, including SEM, AFM, XPS, XRD, and micro-hardness measurement. Potentiodynamic polarization and electrochemical impedance spectroscopy methods were employed to assess the electrochemical behavior of the different samples in a 3.5% NaCl solution. The finding suggests that rapid hollow cathode plasma nitriding can enhance the hardness, wear resistance, and corrosion properties of AISI 304 stainless steel.

Corrosion Behavior of Nitrided Layer of Ti6Al4V Titanium Alloy by Hollow Cathodic Plasma Source Nitriding.

Ti6Al4V titanium alloys, with high specific strength and good biological compatibility with the human body, are ideal materials for medical surgical implants. However, Ti6Al4V titanium alloys are prone to corrosion in the human environment, which affects the service life of implants and harms human health. In this work, hollow cathode plasm source nitriding (HCPSN) was used to generate nitrided layers on the surfaces of Ti6Al4V titanium alloys to improve their corrosion resistance. Ti6Al4V titanium alloys were nitrided in NH3 at 510 °C for 0, 1, 2, and 4 h. The microstructure and phase composition of the Ti-N nitriding layer was characterized by high-resolution transmission electron microscopy, atomic force microscopy, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. This modified layer was identified to be composed of TiN, Ti2N, and α-Ti (N) phase. To study the corrosion properties of different phases, the nitriding 4 h samples were mechanically ground and polished to obtain the various surfaces of Ti2N and α-Ti (N) phases. The potentiodynamic polarization and electrochemical impedance measurements were conducted in Hank's solution to characterize the corrosion resistance of Ti-N nitriding layers in the human environment. The relationship between corrosion resistance and the microstructure of the Ti-N nitriding layer was discussed. The new Ti-N nitriding layer that can improve corrosion resistance provides a broader prospect for applying Ti6Al4V titanium alloy in the medical field.

Tribocorrosion and Surface Protection Technology of Titanium Alloys: A Review.

Titanium alloy has the advantages of high specific strength, good corrosion resistance, and biocompatibility and is widely used in marine equipment, biomedicine, aerospace, and other fields. However, the application of titanium alloy in special working conditions shows some shortcomings, such as low hardness and poor wear resistance, which seriously affect the long life and safe and reliable service of the structural parts. Tribocorrosion has been one of the research hotspots in the field of tribology in recent years, and it is one of the essential factors affecting the application of passivated metal in corrosive environments. In this work, the characteristics of the marine and human environments and their critical tribological problems are analyzed, and the research connotation of tribocorrosion of titanium alloy is expounded. The research status of surface protection technology for titanium alloy in marine and biological environments is reviewed, and the development direction and trends in surface engineering of titanium alloy are prospected.

Elucidating the effect of different desorbents on naphthalene desorption and degradation: Performance and kinetics investigation.

In this work, the effect of different desorbents (low molecular weight organic acids (LMWOAs), surfactants, and inorganic salts) on naphthalene (NAP) desorption in soil was investigated, and the results showed that NAP desorption pattern fitted the pseudo-second-order kinetics. The addition of LMWOAs, especially citric acid (CA), could stimulate the reactive oxygen species (ROS) generation and NAP degradation in Fe(II) activated persulfate (PS) system, while the presence of surfactants and CaCl2 could inhibit the NAP removal due to the competitive consumption of ROS. The maximum removal of NAP was 97.5% within 120 min at the PS/Fe(II)/CA/NAP molar ratio of 15/5/1/1, and the pseudo-first-order kinetic constant of NAP removal increased from 0.0110 min-1 to 0.0783 min-1 with the addition of CA. Compared with surfactants and inorganic salts, LMWOAs, especially CA, were more suitable as desorbent in soil washing coupled with in situ chemical oxidation technique. Moreover, 1.86 mg L-1 desorbed amount and 36.1% removal of NAP from soil could be obtained with the presence of 1 mM CA. Finally, the significant removal of NAP and other contaminants (phenanthrene, fluoranthene, and benzene series) in actual groundwater could provide theoretical basis and technical support for the remediation of organic contaminated sites with desorbents.

Percutaneous Endoscopic Lumbar Discectomy for Lumbar Disc Herniation Using an Endoscopic Staining: A Technical Note.

Symptomatic lumbar disc herniation (LDH) is widely treated using percutaneous endoscopic lumbar discectomy (PELD). In the present PELD surgery, performing decompression under endoscope still takes a long time to explore the rupture site of annulus fibrosus, resulting in prolonged operation time and over-invasion of the undegenerated annulus fibrosus. A wide range of intraoperative exploration also induces an iatrogenic injury of the normal annulus fibrosus, even aggravating intervertebral disc degeneration, which may lead to early postoperative recurrence in severe case. Hence, it is important to seek a precise decompression in PELD surgery. Under this kind of realization, more spinal surgeons possibly choose a disc staining before performing decompression. However, the classical disc staining technique still has its shortcomings. First of all, an appropriate dose of staining cannot be accurately mastered, even induces unqualified staining effect. Second, the duration of surgery and the times of fluoroscopy will be increased. Finally, what surgeons see under the endoscope is the staining result but not the staining process. Hence, this is accomplished more effectively by designing procedures that perform fully visible disc staining under spinal endoscope. There is no specific research to discuss the technique note of endoscopic staining in PELD surgery. We have come up with a new original technology of endoscopic staining with methylene blue injection in PELD for treatment of LDH.

Support loss and Q factor enhancement for a rocking mass microgyroscope.

A rocking mass gyroscope (RMG) is a kind of vibrating mass gyroscope with high sensitivity, whose driving mode and sensing mode are completely uniform. MEMS RMG devices are a research hotspot now because they have the potential to be used in space applications. Support loss is the dominant energy loss mechanism influencing their high sensitivity. An accurate analytical model of support loss for RMGs is presented to enhance their Q factors. The anchor type and support loss mechanism of an RMG are analyzed. Firstly, the support loads, powers flowing into support structure, and vibration energy of an RMG are all developed. Then the analytical model of support loss for the RMG is developed, and its sensitivities to the main structural parameters are also analyzed. High-Q design guidelines for rocking mass microgyroscopes are deduced. Finally, the analytical model is validated by the experimental data and the data from the existing literature. The thicknesses of the prototypes are reduced from 240 µm to 60 µm, while Q factors increase from less than 150 to more than 800. The derived model is general and applicable to various beam resonators, providing significant insight to the design of high-Q MEMS devices.