Osteogenic potentials in canine mesenchymal stem cells: unraveling the efficacy of polycaprolactone/hydroxyapatite scaffolds in veterinary bone regeneration.

BACKGROUND: The integration of stem cells, signaling molecules, and biomaterial scaffolds is fundamental for the successful engineering of functional bone tissue. Currently, the development of composite scaffolds has emerged as an attractive approach to meet the criteria of ideal scaffolds utilized in bone tissue engineering (BTE) for facilitating bone regeneration in bone defects. Recently, the incorporation of polycaprolactone (PCL) with hydroxyapatite (HA) has been developed as one of the suitable substitutes for BTE applications owing to their promising osteogenic properties. In this study, a three-dimensional (3D) scaffold composed of PCL integrated with HA (PCL/HA) was prepared and assessed for its ability to support osteogenesis in vitro. Furthermore, this scaffold was evaluated explicitly for its efficacy in promoting the proliferation and osteogenic differentiation of canine bone marrow-derived mesenchymal stem cells (cBM-MSCs) to fill the knowledge gap regarding the use of composite scaffolds for BTE in the veterinary orthopedics field. RESULTS: Our findings indicate that the PCL/HA scaffolds substantially supported the proliferation of cBM-MSCs. Notably, the group subjected to osteogenic induction exhibited a markedly upregulated expression of the osteogenic gene osterix (OSX) compared to the control group. Additionally, the construction of 3D scaffold constructs with differentiated cells and an extracellular matrix (ECM) was successfully imaged using scanning electron microscopy. Elemental analysis using a scanning electron microscope coupled with energy-dispersive X-ray spectroscopy confirmed that these constructs possessed the mineral content of bone-like compositions, particularly the presence of calcium and phosphorus. CONCLUSIONS: This research highlights the synergistic potential of PCL/HA scaffolds in concert with cBM-MSCs, presenting a multidisciplinary approach to scaffold fabrication that effectively regulates cell proliferation and osteogenic differentiation. Future in vivo studies focusing on the repair and regeneration of bone defects are warranted to further explore the regenerative capacity of these constructs, with the ultimate goal of assessing their potential in veterinary clinical applications.

Zoledronate loaded polylactic acid/polycaprolactone/hydroxyapatite scaffold accelerates regeneration and led to enhance structural performance and functional ability of the radial bone defect in rat.

Abstract. Background: One of the most common concerns in the regeneration of massive bone defects necessitating surgery and bone grafts is the application of tissue engineering using drug delivery. Zoledronate is a well-known effective drug for the healing bone fractures in osteoporotic patients. Aims: An attempt was made to design a more efficient bone scaffold with polycaprolactone, polylactic acid, and hydroxyapatite. Methods: The scaffold was fabricated by freeze-drying and indirect 3D printing approaches. X-ray diffraction, Fourier transform infrared spectroscopy, rheometry, scanning electron microscopy, and neutral red tests were performed to characterize the scaffold. qRT-PCR was also done to define the osteoinductivity and angiogenic induction capacity of this scaffold. Forty rats were selected and randomly divided into four groups: the control group, which received no treatment, the autograft group, scaffold group, and Zol-loaded scaffold group (n=10 in each group). The injured area was studied by radiology, biomechanical analysis, histopathology, histomorphometry, immunohistochemistry, and CT scan analyses. Results: The qRT-PCR results demonstrated significantly higher expression levels of OPN, OCN, and CD31 markers in the scaffold group when compared to the control group (P<0.05). Histopathologically, the newly formed bone tissue was significantly detected in the Zol-loaded scaffold and autograft groups in comparison with the non-treated group (P<0.001). The immunohistochemistry (OC marker), biomechanical, and histomorphometric results indicated a significant improvement in the regeneration of the injured area in the groups treated with autologous bone and Zol-loaded scaffold compared to the non-treated group (P<0.05). Conclusion: The Zol-loaded scaffold accelerated bone regeneration, and led to enhanced structural performance and functional ability of the injured radial bone in rats.

Comparison of osteogenic differentiation potential of induced pluripotent stem cells and buccal fat pad stem cells on 3D-printed HA/ß-TCP collagen-coated scaffolds.

Production of a 3D bone construct with high-yield differentiated cells using an appropriate cell source provides a reliable strategy for different purposes such as therapeutic screening of the drugs. Although adult stem cells can be a good source, their application is limited due to invasive procedure of their isolation and low yield of differentiation. Patient-specific human-induced pluripotent stem cells (hiPSCs) can be an alternative due to their long-term self-renewal capacity and pluripotency after several passages, resolving the requirement of a large number of progenitor cells. In this study, a new biphasic 3D-printed collagen-coated HA/ß-TCP scaffold was fabricated to provide a 3D environment for the cells. The fabricated scaffolds were characterized by the 3D laser scanning digital microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and mechanical test. Then, the osteogenesis potential of the hiPSC-seeded scaffolds was investigated compared to the buccal fat pad stem cell (BFPSC)-seeded scaffolds through in vitro and in vivo studies. In vitro results demonstrated up-regulated expressions of osteogenesis-related genes of RUNX2, ALP, BMP2, and COL1 compared to the BFPSC-seeded scaffolds. In vivo results on calvarial defects in the rats confirmed a higher bone formation in the hiPSC-seeded scaffolds compared to the BFPSC-seeded groups. The immunofluorescence assay also showed higher expression levels of collagen I and osteocalcin proteins in the hiPSC-seeded scaffolds. It can be concluded that using the hiPSC-seeded scaffolds can lead to a high yield of osteogenesis, and the hiPSCs can be used as a superior stem cell source compared to BFPSCs for bone-like construct bioengineering.

Role of bone 1stem cell-seeded 3D polylactic acid/polycaprolactone/hydroxyapatite scaffold on a critical-sized radial bone defect in rat.

Osteoconductive biomaterials were used to find the most reliable materials in bone healing. Our focus was on the bone healing capacity of the stem cell-loaded and unloaded PLA/PCL/HA scaffolds. The 3D scaffold of PLA/PCL/HA was characterized by scanning electron microscopy (SEM), rheology, X-ray diffraction (XRD), and Fourier transform-infrared (FT-IR) spectroscopy. Bone marrow stem cells (BMSCs) have multipotential differentiation into osteoblasts. Forty Wistar male rats were used to organize four experimental groups: control, autograft, scaffold, and BMSCs-loaded scaffold groups. qRT-PCR showed that the BMSCs-loaded scaffold had a higher expression level of CD31 and osteogenic markers compared with the control group (P < 0.05). Radiology and computed tomography (CT) scan evaluations showed significant improvement in the BMSCs-loaded scaffold compared with the control group (P < 0.001). Biomechanical estimation demonstrated significantly higher stress (P < 0.01), stiffness (P < 0.001), and ultimate load (P < 0.01) in the autograft and BMSCs-loaded scaffold groups compared with the untreated group and higher strain was seen in the control group than the other groups (P < 0.01). Histomorphometric and immunohistochemical (IHC) investigations showed significantly improved regeneration scores in the autograft and BMSCs-loaded scaffold groups compared with the control group (P < 0.05). Also, there was a significant difference between the scaffold and control groups in all tests (P < 0.05). The results depicted that our novel approach will allow to develop PLA/PCL/HA 3D scaffold in bone healing via BMSC loading.

Effectiveness of a biodegradable 3D polylactic acid/poly(ɛ-caprolactone)/hydroxyapatite scaffold loaded by differentiated osteogenic cells in a critical-sized radius bone defect in rat.

The effects of a scaffold made of polylactic acid, poly (ɛ-caprolactone) and hydroxyapatite by indirect 3D printing method with and without differentiated bone cells was tested on the regeneration of a critical radial bone defect in rat. The scaffold characterization and mechanical performance were determined by the rheology, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transform infrared spectrometry. The defects were created in forty Wistar rats which were randomly divided into the untreated, autograft, scaffold cell-free, and differentiated bone cell-seeded scaffold groups (n = 10 in each group). The expression level of angiogenic and osteogenic markers, analyzed by quantitative real time-polymerase chain reaction (in vitro), significantly improved (p < 0.05) in the scaffold group compared to the untreated one. Radiology and computed tomography scan demonstrated a significant improvement in the cell-seeded scaffold group compared to the untreated one (p < 0.001). Biomechanical, histopathological, histomorphometric, and immunohistochemical investigations showed significantly better regeneration scores in the cell-seeded scaffold and autograft groups compared to the untreated group (p < 0.05). The cell-seeded scaffold and autograft groups did show comparable results on the 80th day post-treatment (p > 0.05), however, most results in the scaffold group were significantly higher than the untreated group (p < 0.05). Differentiated bone cells can enhance bone regeneration potential of the scaffold.

Effectiveness of mesenchymal stem cell-seeded onto the 3D polylactic acid/polycaprolactone/hydroxyapatite scaffold on the radius bone defect in rat.

PURPOSE: The importance of regeneration in large bone defects forces the orthopedic surgeons to search for a proper methodology. The present experiment evaluated the capability of polylactic acid/polycaprolactone/hydroxyapatite (PLA/PCL/HA) scaffold loaded with and without mesenchymal stem cells (MSCs) on bone regeneration. METHODS: Fourier transform infrared spectrometry, X-ray diffraction, scanning electron microscopy, and rheology methodologies were used to characterize the scaffold. Forty Wistar rats were randomly divided into the four groups including the untreated defects as the control group and three other groups in which the bone defects were treated with autologous bones (autograft group), the PLA/PCL/HA scaffolds (PLA/PCL/HA group), and the MSCs-seeded scaffolds (MSCs-seeded PLA/PCL/HA group). RESULTS: Based on the qRT-PCR results, significantly higher expression levels of osteocalcin, osteopontin, and CD31 were seen in the cell-seeded scaffold group compared to the control group (P < 0.05). The CT scanning and radiographic images depicted significantly more newly formed bonny tissue in the MSCs-loaded scaffold and autograft groups than the untreated group (P < 0.001). The immunohistochemistry, biomechanical, histopathologic, and histomorphometric evaluations demonstrated significantly improved regeneration in the autograft and MSCs-loaded scaffold groups compared to the non-treated group (P < 0.05). There were significant differences between the scaffold and untreated groups in all in vivo evaluations (P < 0.05). CONCLUSION: The MSCs enhanced bone healing potential of the PLA/PCL/HA scaffold and the MSCs-seeded scaffold was comparable to the autograft as the golden treatment regimen (P > 0.05).

Hyaluronic acid scaffold for skin defects in congenital syndactyly release surgery: a novel technique based on the regenerative model.

Syndactyly release may require skin grafting to fill the skin defects, which might lead to complications or poor cosmetic outcomes. A simple graftless technique for syndactyly release with a hyaluronic acid (HA) scaffold used to cover the bare areas is described. Between 2008 and 2011, release of 26 webs in 23 patients was performed. All skin defects were covered with Hyalomatrix(®) PA. One patient was excluded due to early post-operative infection that required HA scaffold removal before its integration. Web creep, secondary deformities, scar quality, and patient and parental satisfaction were assessed. Mean follow-up of the group of 22 patients was 24 months. There were no secondary deformities and minimal degree of web creep. All patients had close to normal pigmentation and good pliability at the sites of scaffold application. The results confirm the use of a HA scaffold as a promising alternative to skin grafting in syndactyly release surgery.