RESUMO
Hard carbon is considered as the most promising anode material for potassium-ion energy storage devices. Substantial progress has been made in exploring advanced hard carbons to solve the issues of sluggish kinetics and large volume changes caused by the large radius of K+. However, the relationship between their complicated microstructures and the K+ charge storage behavior is still not fully explored. Herein, a series of two-dimensional mesoporous carbon microcoins (2D-MCMs) with tunable microstructures in heteroatom content and graphitization degree are synthesized by a facile hard-template method and follow a temperature-controllable annealing process. It is found that high heteroatom content makes for surface-driven K+ storage behavior, which increases the capacity-contribution ratio from a high potential region, while a high graphitization degree makes for K+ intercalation behavior, which increases the capacity-contribution ratio from a low potential region. Electrochemical results from a three-electrode Swagelok cell demonstrate that a 2D-MCM anode with more capacity contribution from a low working region allows the porous carbon cathode to be operated in a much wider electrochemical window, thus storing more charge. As a result, potassium-ion capacitors based on the optimized 2D-MCM anode deliver a high energy density of 113 Wh kg-1 and an exhilarating power density of 51,000 W kg-1.
RESUMO
A process-simplified hard template approach was established to synthesize the monodisperse macroporous silica microspheres with homogeneous structures by twice alkali-thermal treatment and calcination routes. Porous vinyl-functionalized polysesquioxane microspheres (V-PMSQ) were synthesized through a hydrolyzation-polycondensation method and used as templates. The template particles with large aperture and high pore volume were obtained by adjusting the pH value and reaction time of the twice alkali-thermal reaction. After calcination, monodisperse silica microspheres with an average pore size of 30 nm, homogeneous pore structures, and narrow particle size distribution were fabricated, which can be directly used as chromatographic matrices without classification. After that, a new reversed-phase/strong anion-exchange (RP/SAX) mixed-mode stationary phase Sil-S-VOIM was prepared by bonding the 1-vinyl-3-octyl-imidazole ligands to the above silica microspheres through a "thiol-ene" click reaction. The performance of the Sil-S-VOIM column was evaluated by one acidic protein (transferrin) and two basic proteins (lysozyme, α-chymotrypsin) and compared to a single imidazole-modified Sil-S-VIM column and an octyl-modified Sil-C8 column, respectively. Due to the synergistic effect of electrostatic repulsion and hydrophobic interactions, baseline separations of the above proteins were observed only on the Sil-S-VOIM column, with resolutions of 2.55 and 2.01 between lysozyme and transferrin, and between transferrin and α-chymotrypsin, respectively, indicating good selectivity and separation ability compared with single-mode stationary phases. It was applied to the isolation of egg white samples with peaks identified by SDS-PAGE and MALDI-TOF-MS. The results showed that the selective retention and isolation of ovomucoid and ovotransferrin were successfully achieved, with yields of 78.8% and 67.2%, respectively. The protocol described in this work is simpler, faster, and has higher protein recovery. Overall, this new mixed-mode stationary phase provided a promising potential for the separation and determination of intact proteins.
Assuntos
Conalbumina , Muramidase , Ovomucina , Imidazóis , Transferrina , ÁlcalisRESUMO
Low electronic conductivity and poor properties at high rate have hindered the application of Na3V2(PO4)3 (NVP). Herein, a facile synthesis of NVP with porous carbon skeleton is proposed. Specifically, Na2CO3 and glucose, acting as hard templates, are introduced to the precursors after initial firing stage, and Na2CO3 particles are removed by flushing after the final heatment. Due to the thermal conductivity of Na2CO3, the secondary addition of glucose can generate distinctive graphitized porous carbon skeleton, which bonds well with the amorphous carbon coating to construct stable and conductive network. The porous construction can alleviate the stress and strain caused by the current impact through deformation. Furthermore, ex-situ EIS reveals the highly conductive carbon skeleton can significantly reduce the surface resistance and result in an increase of effective voltage to promote the de-intercalation of Na+. Moreover, the ex-situ X-ray photoelectron spectroscopy (XPS) at different potentials confirms the stabilized existence of VOC bonds. Benefiting from the unique carbon skeleton, the PC-NVP releases capacity of 116.9 mAh g-1 at 0.1C. Even at 120C, PC-NVP still exhibits a high capacity of 84.7 mAh g-1, retaining a value of 41.3 mAh g-1 after 16,000 cycles, corresponding to a low decay rate of 0.0032% per cycle.
RESUMO
The hard template method for the preparation of monodisperse mesoporous silica microspheres (MPSMs) has been established in recent years. In this process, in situ-generated silica nanoparticles (SNPs) enter the porous organic template and control the size and pore parameters of the final MPSMs. Here, the sizes of the deposited SNPs are determined by the hydrolysis and condensation rates of different alkoxysilanes in a base catalyzed sol-gel process. Thus, tetramethyl orthosilicate (TMOS), tetraethyl orthosilicate (TEOS), tetrapropyl orthosilicate (TPOS) and tetrabutyl orthosilicate (TBOS) were sol-gel processed in the presence of amino-functionalized poly (glycidyl methacrylate-co-ethylene glycol dimethacrylate) (p(GMA-co-EDMA)) templates. The size of the final MPSMs covers a broad range of 0.5-7.3 µm and a median pore size distribution from 4.0 to 24.9 nm. Moreover, the specific surface area can be adjusted between 271 and 637 m2 g-1. Also, the properties and morphology of the MPSMs differ according to the SNPs. Furthermore, the combination of different alkoxysilanes allows the individual design of the morphology and pore parameters of the silica particles. Selected MPSMs were packed into columns and successfully applied as stationary phases in high-performance liquid chromatography (HPLC) in the separation of various water-soluble vitamins.
Assuntos
Nanopartículas , Dióxido de Silício , Dióxido de Silício/química , Metilmetacrilatos , Nanopartículas/química , MicroesferasRESUMO
Developing cost-effective and highly efficient photocathodes toward polysulfide redox reduction is highly desirable for advanced quantum dot (QD) photovoltaics. Herein, we demonstrate nitrogen doped carbon (N-C) shell-supported iron single atom catalysts (Fe-SACs) capable of catalyzing polysulfide reduction in QD photovoltaics for the first time. Specifically, Fe-SACs with FeN4 active sites feature a power conversion efficiency of 13.7% for ZnCuInSe-QD photovoltaics (AM1.5G, 100 mW/cm2), which is the highest value for ZnCuInSe QD-based photovoltaics, outperforming those of Cu-SACs and N-C catalysts. Compared with N-C, Fe-SACs exhibit suitable energy level matching with polysulfide redox couples, revealed by the Kelvin probe force microscope, which accelerates the charge transferring at the interfaces of catalyst/polysulfide redox couple. Density functional theory calculations demonstrate that the outstanding catalytic activity of Fe-SACs originates from the preferable adsorption of S42- on the FeN4 active sites and the high activation degree of the S-S bonds in S42- initiated by the FeN4 active sites.
RESUMO
Oxidized mesoporous carbon CSBA-15, obtained by the hard method, was applied to remove rhodamine B from the aqueous system. The process of carbon oxidation was performed using 0.5 and 5 M of nitric (V) acid solution at 70 and 100 °C. Functionalization of mesoporous carbon with HNO3 solutions led to reduction in the surface area, pore volume, and micropore area, however, it also led to an increased number of oxygen functional groups of acidic character. The functional groups probably are located at the entrance of micropores, in this way, reducing the values of textural parameters. Isotherms of rhodamine B adsorption indicate that the oxidation of mesoporous carbons resulted in an increase in the effectiveness of the removal of this dye from aqueous solutions. The influence of temperature, pH, and contact time of mesoporous material/rhodamine B on the effectiveness of dye removal was tested. The process of dye adsorption on the surfaces of the materials studied was established to be most effective at pH 12 and at 60 °C. Kinetic studies of the process of adsorption proved that the equilibrium state between the dye molecules and mesoporous carbon materials is reached after about 1 h. The adsorption kinetics were well fitted using a pseudo-second-order model. The most effective in rhodamine B removal was the sample CSBA-15-5-100, containing the greatest number of oxygen functional groups of acidic character. The Langmuir model best represented equilibrium data.
RESUMO
Lithium-sulfur battery(LSB)'s commercial manufacturing has been mainly retarded by the "shuttle effect" and low electrical conductivity of polysulfides (LiPSs). Designing a cathode with hollow and hierarchically porous structures was expected to solve the above problems. Herein, a kind of TiN particles with the hierarchical hollow double-shelled structures was synthesized and applied to cathodes of LSB. The Fig-like hollow TiO2 particles (FHTiO2s) were firstly synthesized by the hard-template method. Subsequently, the Fig-like hierarchical hollow double-shelled TiN particles (FHTiNs) were synthesized by the template-free sequential transformation and separation approach (STSA). It was verified that the heating temperature and time were key parameters. Special Fig-like double-shell hollow structures could greatly increase the loading of S, and the excellent initial capacity of FHTiNs cathodes was up to 1159 mAh/g. On the one hand, the Fig-like framework in internal cavity and double-shell structures could promote the ultrahigh specific surface area, and the adsorption to LiPSs was improved by increasing active sites; On the other hand, the shuttle effect of LiPSs was weakened by the fig-like framework and double-shell structures, which slowed down the massive dissolution of sulfur in the electrolyte. As a result, the pleasant rate performance of FHTiNs cathodes was up to 400 mAh/g at 5C. This novel structures and synthesis method provided a new strategy for the designing of LSB cathodes.
RESUMO
Paracetamol is the most commonly used antipyretic and analgesic drug in the world. The key challenge in paracetamol therapy is associated with the frequency of the dosing. Depending on the gastric filling within 10-20 min paracetamol is released and rapidly absorbed from the gastrointestinal tract. Therefore, it must be taken three or four times a day. To address the dose challenge it is desirable that the paracetamol release profile follows the zero-order kinetic model (constant rate of drug release per unit time). This goal can be achieved by using a suitable porous carrier system. Herein, non-toxic wrinkled mesoporous carbons with unique morphology were synthesized via the hard template method as new carriers for paracetamol. These particles can precisely modulate the release of paracetamol over 24 h in a simulated gastric fluid according to the zero-order kinetic model completely eliminating the initial burst release. Overall, these systems could significantly enhance the bioavailability of paracetamol and prolong its therapeutic effect in numerous diseases such as cold, flu, COVID-19, and severe pain.
Assuntos
Acetaminofen , Tratamento Farmacológico da COVID-19 , Carbono/química , Portadores de Fármacos , Dor/tratamento farmacológico , SARS-CoV-2 , Acetaminofen/química , Acetaminofen/farmacocinética , Preparações de Ação Retardada/química , Preparações de Ação Retardada/farmacocinética , Portadores de Fármacos/química , Portadores de Fármacos/farmacocinética , HumanosRESUMO
Mesoporous carbon of cubic structure was functionalized with ethylamine, ethylenediamine, diethylenetriamine and triethylenetetramine at 40°C for 8h. The mesostructure and textural parameters of the new materials were determined by X-ray diffraction and low-temperature nitrogen sorption techniques. The functional groups present on the surface of the samples were identified by FT-IR and thermogravimetric studies. Functionalization of the mesoporous carbon led to reduction of the surface area and pore volume as well as to an increase in the mean pore diameter. The micropores/small mesopores can be blocked by the attached surface amino groups. We found that after functionalization the mesostructural regularity was still maintained. A key element of the study was a series of adsorption tests of solophenyl red 3BL polyazo dye onto amine-functionalized mesoporous carbons from aqueous solutions. The influence of the process time, concentration of adsorbate, pH and temperature on the efficiency of the adsorption process was analyzed. The samples modified with amine groups were found to show much higher sorption capacities towards solophenyl red 3BL than pure carbon. It is a results of formation of a large number of positive surface sites that interact with anionic adsorbate. The adsorption kinetics was found to follow closely the pseudo-second-order kinetic model. The results of the intraparticle diffusion model suggested that intraparticle diffusion was not the only one rate-controlling step. The adsorption of the dye was a spontaneous and endothermic process.
RESUMO
In this work, RuO2 honeycomb networks (RHCs) and hollow spherical structures (RHSs) were rationally designed and synthesized with modified-SiO2 as a sacrificial template via two hydrothermal approaches. At a high current density of 20 A g-1, the two hierarchical porous RuO2·xH2O frameworks showed the specific capacitance as high as 628 and 597 F g-1; this is about 80% and 75% of the capacitance retention of 0.5 A g-1 for RHCs and RHSs, respectively. Even after 4000 cycles at 5 A g-1, the RHCs and RHSs can still remain at 86% and 91% of their initial specific capacitances, respectively. These two hierarchical frameworks have a well-defined pathway that benefits for the transmission/diffusion of electrolyte and surface redox reactions. As a result, they exhibit good supercapacitor performance in both acid (H2SO4) and alkaline (KOH) electrolytes. As compared to RuO2 bulk structure and similar RuO2 counterpart reported in pseudocapacitors, the two hierarchical porous RuO2·xH2O frameworks have better energy storage capabilities, high-rate performance, and excellent cycling stability.